From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
To: LKML <linux-kernel@vger.kernel.org>
Subject: slow performance on disk/network i/o full speed after drop_caches
Date: Wed, 24 Aug 2011 08:06:12 +0200 [thread overview]
Message-ID: <4E5494D4.1050605@profihost.ag> (raw)
Dear list,
i hope this is the correct list to write to if it would be nice to give
me a hint where i can ask.
Kernel: 2.6.38
I'm seeing some strange problems on some of our servers after upgrading
to 2.6.38.
I'm copying a 1GB file via scp from Machine A to Machine B. When B is
freshly booted the file transfer is done with about 80 to 85 Mb/s. I can
repeat that various times to performance degrease.
Then after some days copying is only done with about 900kb/s up to 3Mb/s
going up and down while transfering the file.
When i then do drop_caches it works again on 80Mb/s.
sync && echo 3 >/proc/sys/vm/drop_caches && sleep 2 && echo 0
>/proc/sys/vm/drop_caches
Attached is also an output of meminfo before and after drop_caches.
What's going on here? MemFree is pretty high.
Please CC me i'm not on list.
Greets Stefan
# before drop_caches
# cat /proc/meminfo
MemTotal: 8185544 kB
MemFree: 6670292 kB
Buffers: 105164 kB
Cached: 166672 kB
SwapCached: 0 kB
Active: 728308 kB
Inactive: 567428 kB
Active(anon): 639204 kB
Inactive(anon): 394932 kB
Active(file): 89104 kB
Inactive(file): 172496 kB
Unevictable: 2976 kB
Mlocked: 2992 kB
SwapTotal: 1464316 kB
SwapFree: 1464316 kB
Dirty: 52 kB
Writeback: 0 kB
AnonPages: 1026920 kB
Mapped: 54208 kB
Shmem: 8380 kB
Slab: 80724 kB
SReclaimable: 22844 kB
SUnreclaim: 57880 kB
KernelStack: 2872 kB
PageTables: 35448 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 5557088 kB
Committed_AS: 6187972 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 292360 kB
VmallocChunk: 34359425327 kB
HardwareCorrupted: 0 kB
DirectMap4k: 5632 kB
DirectMap2M: 2082816 kB
DirectMap1G: 6291456 kB
# cat /proc/meminfo
MemTotal: 8185544 kB
MemFree: 6888060 kB
Buffers: 372 kB
Cached: 61492 kB
SwapCached: 0 kB
Active: 659156 kB
Inactive: 426664 kB
Active(anon): 638892 kB
Inactive(anon): 395200 kB
Active(file): 20264 kB
Inactive(file): 31464 kB
Unevictable: 2976 kB
Mlocked: 2992 kB
SwapTotal: 1464316 kB
SwapFree: 1464316 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 1026952 kB
Mapped: 54236 kB
Shmem: 8316 kB
Slab: 70616 kB
SReclaimable: 12264 kB
SUnreclaim: 58352 kB
KernelStack: 2864 kB
PageTables: 35448 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 5557088 kB
Committed_AS: 6187932 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 292360 kB
VmallocChunk: 34359425327 kB
HardwareCorrupted: 0 kB
DirectMap4k: 5632 kB
DirectMap2M: 2082816 kB
DirectMap1G: 6291456 kB
next reply other threads:[~2011-08-24 6:12 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-24 6:06 Stefan Priebe - Profihost AG [this message]
2011-08-24 6:20 ` slow performance on disk/network i/o full speed after drop_caches Pekka Enberg
2011-08-24 6:20 ` Pekka Enberg
2011-08-24 9:01 ` Stefan Priebe - Profihost AG
2011-08-24 9:01 ` Stefan Priebe - Profihost AG
2011-08-24 9:33 ` Wu Fengguang
2011-08-24 9:33 ` Wu Fengguang
2011-08-25 9:00 ` Stefan Priebe - Profihost AG
2011-08-25 9:00 ` Stefan Priebe - Profihost AG
2011-08-26 2:16 ` Wu Fengguang
2011-08-26 2:16 ` Wu Fengguang
2011-08-26 2:54 ` Stefan Priebe - Profihost AG
2011-08-26 2:54 ` Stefan Priebe - Profihost AG
2011-08-26 3:03 ` Wu Fengguang
2011-08-26 3:03 ` Wu Fengguang
2011-08-26 3:13 ` Stefan Priebe
2011-08-26 3:13 ` Stefan Priebe
2011-08-26 3:26 ` Wu Fengguang
2011-08-26 3:26 ` Wu Fengguang
2011-08-26 3:30 ` Zhu Yanhai
2011-08-26 3:30 ` Zhu Yanhai
2011-08-26 6:18 ` Stefan Priebe - Profihost AG
2011-08-26 6:18 ` Stefan Priebe - Profihost AG
2011-08-31 7:11 ` Stefan Priebe - Profihost AG
2011-08-31 7:11 ` Stefan Priebe - Profihost AG
2011-09-01 4:14 ` Wu Fengguang
2011-09-01 4:14 ` Wu Fengguang
2011-09-01 5:41 ` Stefan Priebe - Profihost AG
2011-09-01 5:41 ` Stefan Priebe - Profihost AG
2011-09-01 12:57 ` Mel Gorman
2011-09-01 12:57 ` Mel Gorman
2011-08-24 9:32 ` Wu Fengguang
2011-08-24 9:32 ` Wu Fengguang
2011-08-24 9:32 ` Wu Fengguang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E5494D4.1050605@profihost.ag \
--to=s.priebe@profihost.ag \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.