* Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
@ 2011-08-19 17:58 Rolf Eike Beer
2011-08-31 9:54 ` Rolf Eike Beer
2011-09-04 1:46 ` John David Anglin
0 siblings, 2 replies; 23+ messages in thread
From: Rolf Eike Beer @ 2011-08-19 17:58 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: Type: Text/Plain, Size: 15195 bytes --]
The last kernel I used on this machine was 2.6.38.4. Any hints appreciated.
Greetings,
Eike
Command line for kernel: 'root=/dev/sda3 console=ttyS0
palo_kernel=2/kernel-3.0.3'
Selected kernel: /kernel-3.0.3 from partition 2
ELF32 executable
Entry 00100100 first 00100000 n 3
Segment 0 load 00100000 size 4820992 mediaptr 0x1000
Segment 1 load 005c8000 size 116752 mediaptr 0x49a000
Segment 2 load 005e5000 size 27888 mediaptr 0x4b7000
Branching to kernel entry point 0x00100100. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 3.0.3 (root@voyager) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0,
pie-0.4.5) ) #1 Fri Aug 19 14:48:59 CEST 2011
unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
WARNING: Out of order unwind entry! 105041f0 and 10504200
WARNING: Out of order unwind entry! 10504200 and 10504210
WARNING: Out of order unwind entry! 10504cf0 and 10504d00
WARNING: Out of order unwind entry! 10504d00 and 10504d10
FP[0] enabled: Rev 1 Model 16
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005cf0 00000481 00000000 00000002 77486b80 100000f0 00000008 000000b2
000000b2
vers 00000301
CPUID vers 17 rev 11 (0x0000022b)
capabilities 0x3
model 9000/785/C3600
Total Memory: 512 MB
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001110 Not tainted
r00-03 0004000e 0004000e 105caed8 00000000
r04-07 10544014 10544000 105401cc 1054daf4
r08-11 1054db10 10544020 10576800 000005ec
r12-15 00100000 00020000 10544000 10576af8
r16-19 00020000 105b7000 005ebfff 0000000e
r20-23 00000000 00000000 00000000 00000000
r24-27 00000001 00000000 00000000 10544000
r28-31 00000000 00000000 10540280 00000000
sr00-03 00000000 00000000 00000000 00000000
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1010047c 10100480
IIR: 43ffff40 ISR: 00000000 IOR: 00000000
CPU: 0 CR30: 10540000 CR31: ffffffff
ORIG_R28: 00000000
IAOQ[0]: .L21+0x0/0x8
IAOQ[1]: .L21+0x4/0x8
RP(r2): paging_init+0x7ac/0x848
Backtrace:
[<105caed8>] paging_init+0x7ac/0x848
[<105cb474>] setup_arch+0x5c/0x80
[<105c86ac>] start_kernel+0x80/0x374
[<1011497c>] start_parisc+0x4c/0x68
Backtrace:
[<10115050>] die_if_kernel+0xac/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
---[ end trace 139ce121c98e96c9 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
Backtrace:
[<1010fdec>] panic+0x90/0x23c
[<10135b28>] do_exit+0x5cc/0x640
[<1011508c>] die_if_kernel+0xe8/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
die_if_kernel() recursion detected.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-19 17:58 Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7) Rolf Eike Beer
@ 2011-08-31 9:54 ` Rolf Eike Beer
2011-08-31 15:48 ` Kyle McMartin
2011-09-04 1:46 ` John David Anglin
1 sibling, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-08-31 9:54 UTC (permalink / raw)
To: linux-parisc
> The last kernel I used on this machine was 2.6.38.4. Any hints
> appreciated.
I updated the machine to 2.6.38.8 (works fine after applying
b54cd0d5053633373cd3c374aa203024cbf125a0 and reverting
c3f957a22eca106bd28136943305b390b4337ebf) and 3.0.4, which is still
broken. Any ideas?
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-31 9:54 ` Rolf Eike Beer
@ 2011-08-31 15:48 ` Kyle McMartin
2011-08-31 16:04 ` Kyle McMartin
0 siblings, 1 reply; 23+ messages in thread
From: Kyle McMartin @ 2011-08-31 15:48 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Wed, Aug 31, 2011 at 11:54:29AM +0200, Rolf Eike Beer wrote:
> > The last kernel I used on this machine was 2.6.38.4. Any hints
> > appreciated.
>
> I updated the machine to 2.6.38.8 (works fine after applying
> b54cd0d5053633373cd3c374aa203024cbf125a0 and reverting
> c3f957a22eca106bd28136943305b390b4337ebf) and 3.0.4, which is still
> broken. Any ideas?
Attach .config?
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-31 15:48 ` Kyle McMartin
@ 2011-08-31 16:04 ` Kyle McMartin
2011-09-01 19:13 ` Rolf Eike Beer
2011-09-02 10:30 ` Rolf Eike Beer
0 siblings, 2 replies; 23+ messages in thread
From: Kyle McMartin @ 2011-08-31 16:04 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Wed, Aug 31, 2011 at 11:48:20AM -0400, Kyle McMartin wrote:
> Attach .config?
>
I suspect bootmem changes have broken somewhere on 32-bit... try
inserting a few printk between each of the function calls at the start
of paging_init to try to narrow down exactly where it fails.
--Kyle
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-31 16:04 ` Kyle McMartin
@ 2011-09-01 19:13 ` Rolf Eike Beer
2011-09-02 10:30 ` Rolf Eike Beer
1 sibling, 0 replies; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-01 19:13 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1.1: Type: text/plain, Size: 379 bytes --]
You wrote:
> On Wed, Aug 31, 2011 at 11:48:20AM -0400, Kyle McMartin wrote:
> > Attach .config?
>
> I suspect bootmem changes have broken somewhere on 32-bit... try
> inserting a few printk between each of the function calls at the start
> of paging_init to try to narrow down exactly where it fails.
.config is attached, I'll try to do some printk or bisecting tomorrow.
Eike
[-- Attachment #1.2: kernel-config-parisc-3.0.4 --]
[-- Type: text/plain, Size: 43295 bytes --]
#
# Automatically generated make config: don't edit
# Linux/parisc 3.0.4 Kernel Configuration
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="voyager.sf-tec.de"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
CONFIG_PARISC_PAGE_SIZE_4KB=y
# CONFIG_PARISC_PAGE_SIZE_16KB is not set
# CONFIG_PARISC_PAGE_SIZE_64KB is not set
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
# CONFIG_HPUX is not set
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# CONFIG_GSC is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_IOMMU_HELPER=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# PA-RISC specific drivers
#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_MII=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
# CONFIG_NFSD_DEPRECATED is not set
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP2=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_AVERAGE is not set
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-31 16:04 ` Kyle McMartin
2011-09-01 19:13 ` Rolf Eike Beer
@ 2011-09-02 10:30 ` Rolf Eike Beer
2011-09-06 7:40 ` Rolf Eike Beer
1 sibling, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-02 10:30 UTC (permalink / raw)
To: linux-parisc
> On Wed, Aug 31, 2011 at 11:48:20AM -0400, Kyle McMartin wrote:
>> Attach .config?
>>
>
> I suspect bootmem changes have broken somewhere on 32-bit... try
> inserting a few printk between each of the function calls at the start
> of paging_init to try to narrow down exactly where it fails.
It's flush_cache_all_local() that fails.
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-02 10:30 ` Rolf Eike Beer
@ 2011-09-06 7:40 ` Rolf Eike Beer
2011-09-06 13:46 ` Kyle McMartin
0 siblings, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-06 7:40 UTC (permalink / raw)
To: linux-parisc
>> On Wed, Aug 31, 2011 at 11:48:20AM -0400, Kyle McMartin wrote:
>>> Attach .config?
>>>
>>
>> I suspect bootmem changes have broken somewhere on 32-bit... try
>> inserting a few printk between each of the function calls at the start
>> of paging_init to try to narrow down exactly where it fails.
>
> It's flush_cache_all_local() that fails.
2.6.39.4 works.
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 7:40 ` Rolf Eike Beer
@ 2011-09-06 13:46 ` Kyle McMartin
2011-09-06 14:00 ` Kyle McMartin
0 siblings, 1 reply; 23+ messages in thread
From: Kyle McMartin @ 2011-09-06 13:46 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Tue, Sep 06, 2011 at 09:40:13AM +0200, Rolf Eike Beer wrote:
> >> I suspect bootmem changes have broken somewhere on 32-bit... try
> >> inserting a few printk between each of the function calls at the start
> >> of paging_init to try to narrow down exactly where it fails.
> >
> > It's flush_cache_all_local() that fails.
>
> 2.6.39.4 works.
>
Well... that's weird.
--Kyle
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 13:46 ` Kyle McMartin
@ 2011-09-06 14:00 ` Kyle McMartin
2011-09-06 14:15 ` James Bottomley
2011-09-06 14:41 ` John David Anglin
0 siblings, 2 replies; 23+ messages in thread
From: Kyle McMartin @ 2011-09-06 14:00 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Tue, Sep 06, 2011 at 09:46:11AM -0400, Kyle McMartin wrote:
> > >> I suspect bootmem changes have broken somewhere on 32-bit... try
> > >> inserting a few printk between each of the function calls at the start
> > >> of paging_init to try to narrow down exactly where it fails.
> > >
> > > It's flush_cache_all_local() that fails.
> >
> > 2.6.39.4 works.
> >
>
> Well... that's weird.
>
0: 43 ff ff 40 ldb 7fa0(r31),r31
Is the faulting insn, and %r31 is 00000000... so
we're looking at 32672, which looks suspiciously like
a negative offset from 32768.
Looks like it's a null pointer dereference, there shouldn't be anything
useful at this address, if I remember our address space map correctly.
--Kyle
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:00 ` Kyle McMartin
@ 2011-09-06 14:15 ` James Bottomley
2011-09-06 14:20 ` Kyle McMartin
2011-09-06 14:41 ` John David Anglin
1 sibling, 1 reply; 23+ messages in thread
From: James Bottomley @ 2011-09-06 14:15 UTC (permalink / raw)
To: Kyle McMartin; +Cc: Rolf Eike Beer, linux-parisc
On Tue, 2011-09-06 at 10:00 -0400, Kyle McMartin wrote:
> On Tue, Sep 06, 2011 at 09:46:11AM -0400, Kyle McMartin wrote:
> > > >> I suspect bootmem changes have broken somewhere on 32-bit... try
> > > >> inserting a few printk between each of the function calls at the start
> > > >> of paging_init to try to narrow down exactly where it fails.
> > > >
> > > > It's flush_cache_all_local() that fails.
> > >
> > > 2.6.39.4 works.
> > >
> >
> > Well... that's weird.
> >
> 0: 43 ff ff 40 ldb 7fa0(r31),r31
>
> Is the faulting insn, and %r31 is 00000000... so
> we're looking at 32672, which looks suspiciously like
> a negative offset from 32768.
>
> Looks like it's a null pointer dereference, there shouldn't be anything
> useful at this address, if I remember our address space map correctly.
It's possible that one of the flushing patches is to blame; I just can't
see how. Most likely is
commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Thu Apr 14 18:25:21 2011 -0500
[PARISC] only make executable areas executable
Least likely:
commit b7d45818444a31948cfc7849136013a0ea54b2fb
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Fri Apr 15 12:37:22 2011 -0500
[PARISC] prevent speculative re-read on cache flush
James
^ permalink raw reply [flat|nested] 23+ messages in thread* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:15 ` James Bottomley
@ 2011-09-06 14:20 ` Kyle McMartin
2011-09-06 15:06 ` Rolf Eike Beer
2011-09-07 8:00 ` Rolf Eike Beer
0 siblings, 2 replies; 23+ messages in thread
From: Kyle McMartin @ 2011-09-06 14:20 UTC (permalink / raw)
To: James Bottomley; +Cc: Rolf Eike Beer, linux-parisc
On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
> It's possible that one of the flushing patches is to blame; I just can't
> see how. Most likely is
>
> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Thu Apr 14 18:25:21 2011 -0500
>
> [PARISC] only make executable areas executable
>
This looks promising, the second commit doesn't touch the flush_*_local,
so I think it's probably not a candidate.
Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
what happens?
Thanks James.
--Kyle
> Least likely:
>
> commit b7d45818444a31948cfc7849136013a0ea54b2fb
> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> Date: Fri Apr 15 12:37:22 2011 -0500
>
> [PARISC] prevent speculative re-read on cache flush
>
> James
>
>
>
>
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:20 ` Kyle McMartin
@ 2011-09-06 15:06 ` Rolf Eike Beer
2011-09-07 8:00 ` Rolf Eike Beer
1 sibling, 0 replies; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-06 15:06 UTC (permalink / raw)
To: linux-parisc
> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
>> It's possible that one of the flushing patches is to blame; I just can't
>> see how. Most likely is
>>
>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>> Date: Thu Apr 14 18:25:21 2011 -0500
>>
>> [PARISC] only make executable areas executable
>>
>
> This looks promising, the second commit doesn't touch the flush_*_local,
> so I think it's probably not a candidate.
>
> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
> what happens?
Yes, testing.
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:20 ` Kyle McMartin
2011-09-06 15:06 ` Rolf Eike Beer
@ 2011-09-07 8:00 ` Rolf Eike Beer
2011-10-12 7:26 ` Rolf Eike Beer
1 sibling, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-07 8:00 UTC (permalink / raw)
To: linux-parisc
> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
>> It's possible that one of the flushing patches is to blame; I just can't
>> see how. Most likely is
>>
>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>> Date: Thu Apr 14 18:25:21 2011 -0500
>>
>> [PARISC] only make executable areas executable
>>
>
> This looks promising, the second commit doesn't touch the flush_*_local,
> so I think it's probably not a candidate.
>
> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
> what happens?
What happens is that the system boots and from a first glance seems to
work fine.
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-07 8:00 ` Rolf Eike Beer
@ 2011-10-12 7:26 ` Rolf Eike Beer
2011-10-12 13:41 ` James Bottomley
0 siblings, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-10-12 7:26 UTC (permalink / raw)
To: linux-parisc
>> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
>>> It's possible that one of the flushing patches is to blame; I just
>>> can't
>>> see how. Most likely is
>>>
>>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
>>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>>> Date: Thu Apr 14 18:25:21 2011 -0500
>>>
>>> [PARISC] only make executable areas executable
>>>
>>
>> This looks promising, the second commit doesn't touch the flush_*_local,
>> so I think it's probably not a candidate.
>>
>> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
>> what happens?
>
> What happens is that the system boots and from a first glance seems to
> work fine.
James, are you going to revert that commit? Or am I the only one that is
seeing this?
Greetings,
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-10-12 7:26 ` Rolf Eike Beer
@ 2011-10-12 13:41 ` James Bottomley
2011-10-18 15:51 ` James Bottomley
2011-10-26 13:02 ` Rolf Eike Beer
0 siblings, 2 replies; 23+ messages in thread
From: James Bottomley @ 2011-10-12 13:41 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Wed, 2011-10-12 at 09:26 +0200, Rolf Eike Beer wrote:
> >> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
> >>> It's possible that one of the flushing patches is to blame; I just
> >>> can't
> >>> see how. Most likely is
> >>>
> >>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
> >>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> >>> Date: Thu Apr 14 18:25:21 2011 -0500
> >>>
> >>> [PARISC] only make executable areas executable
> >>>
> >>
> >> This looks promising, the second commit doesn't touch the flush_*_local,
> >> so I think it's probably not a candidate.
> >>
> >> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
> >> what happens?
> >
> > What happens is that the system boots and from a first glance seems to
> > work fine.
>
> James, are you going to revert that commit? Or am I the only one that is
> seeing this?
You're the only one whose seeing this. It works 32 bit on my C360, so I
really need to know why and I don't seem to have a means to debug if
it's C3600 only. If I revert that commit, we start segfaulting again.
James
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-10-12 13:41 ` James Bottomley
@ 2011-10-18 15:51 ` James Bottomley
2011-10-26 13:02 ` Rolf Eike Beer
1 sibling, 0 replies; 23+ messages in thread
From: James Bottomley @ 2011-10-18 15:51 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On Wed, 2011-10-12 at 08:41 -0500, James Bottomley wrote:
> On Wed, 2011-10-12 at 09:26 +0200, Rolf Eike Beer wrote:
> > >> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
> > >>> It's possible that one of the flushing patches is to blame; I just
> > >>> can't
> > >>> see how. Most likely is
> > >>>
> > >>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
> > >>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
> > >>> Date: Thu Apr 14 18:25:21 2011 -0500
> > >>>
> > >>> [PARISC] only make executable areas executable
> > >>>
> > >>
> > >> This looks promising, the second commit doesn't touch the flush_*_local,
> > >> so I think it's probably not a candidate.
> > >>
> > >> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
> > >> what happens?
> > >
> > > What happens is that the system boots and from a first glance seems to
> > > work fine.
> >
> > James, are you going to revert that commit? Or am I the only one that is
> > seeing this?
>
> You're the only one whose seeing this. It works 32 bit on my C360, so I
> really need to know why and I don't seem to have a means to debug if
> it's C3600 only. If I revert that commit, we start segfaulting again.
Just an update on this, I finally got my J6000 memory problems sorted
out and booted it with 3.1-rc9 32 bit, and it works fine too (SMP as
well). That's the closest thing I have to a C3600 because it's
Astro/Elroy based, so I've no means at all of reproducing this.
James
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-10-12 13:41 ` James Bottomley
2011-10-18 15:51 ` James Bottomley
@ 2011-10-26 13:02 ` Rolf Eike Beer
2011-10-28 15:11 ` Jeroen Roovers
1 sibling, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-10-26 13:02 UTC (permalink / raw)
To: linux-parisc
> On Wed, 2011-10-12 at 09:26 +0200, Rolf Eike Beer wrote:
>> >> On Tue, Sep 06, 2011 at 09:15:07AM -0500, James Bottomley wrote:
>> >>> It's possible that one of the flushing patches is to blame; I just
>> >>> can't
>> >>> see how. Most likely is
>> >>>
>> >>> commit d7dd2ff11b7fcd425aca5a875983c862d19a67ae
>> >>> Author: James Bottomley <James.Bottomley@HansenPartnership.com>
>> >>> Date: Thu Apr 14 18:25:21 2011 -0500
>> >>>
>> >>> [PARISC] only make executable areas executable
>> >>>
>> >>
>> >> This looks promising, the second commit doesn't touch the
>> flush_*_local,
>> >> so I think it's probably not a candidate.
>> >>
>> >> Rolf, can you revert d7dd2ff11b7fcd425aca5a875983c862d19a67ae and see
>> >> what happens?
>> >
>> > What happens is that the system boots and from a first glance seems to
>> > work fine.
>>
>> James, are you going to revert that commit? Or am I the only one that is
>> seeing this?
>
> You're the only one whose seeing this. It works 32 bit on my C360, so I
> really need to know why and I don't seem to have a means to debug if
> it's C3600 only. If I revert that commit, we start segfaulting again.
Ok, I think I found the culprit. This change to the .config makes my
machine boot:
--- kernel-config-parisc-3.1.0 2011-10-26 14:56:42.418487152 +0200
+++ config 2011-10-26 14:56:29.583485965 +0200
@@ -16,6 +16,7 @@
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
@@ -114,6 +115,7 @@
#
# GCOV-based kernel profiling
#
+CONFIG_GCOV_KERNEL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -1524,7 +1528,7 @@
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
Without this change I can reproduce the problem also on 3.1. Config follow.
Eike
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_DEFAULT_HOSTNAME="voyager.sf-tec.de"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_FHANDLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_TINY_RCU=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_INLINE_SPIN_UNLOCK=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
CONFIG_PARISC_PAGE_SIZE_4KB=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_PCI=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_PCI=m
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS_WARN=y
CONFIG_PDC_STABLE=y
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_MISC_DEVICES=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_IDE_PROC_FS=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_SATA_VIA=m
CONFIG_PATA_VIA=m
CONFIG_MD=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_TUN=m
CONFIG_MII=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
CONFIG_NET_PCI=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSE=y
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_DEVPORT=y
CONFIG_SSB_POSSIBLE=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_STI=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_STI_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_PARISC_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_HID=y
CONFIG_USB_HIDDEV=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_GENERIC=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_FAT_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP2=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-10-26 13:02 ` Rolf Eike Beer
@ 2011-10-28 15:11 ` Jeroen Roovers
0 siblings, 0 replies; 23+ messages in thread
From: Jeroen Roovers @ 2011-10-28 15:11 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: Type: text/plain, Size: 1078 bytes --]
On Wed, 26 Oct 2011 15:02:35 +0200
"Rolf Eike Beer" <eike-kernel@sf-tec.de> wrote:
> Ok, I think I found the culprit. This change to the .config makes my
> machine boot:
>
> --- kernel-config-parisc-3.1.0 2011-10-26 14:56:42.418487152 +0200
> +++ config 2011-10-26 14:56:29.583485965 +0200
> @@ -16,6 +16,7 @@
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> +CONFIG_CONSTRUCTORS=y
> CONFIG_HAVE_IRQ_WORK=y
> CONFIG_IRQ_WORK=y
>
> @@ -114,6 +115,7 @@
> #
> # GCOV-based kernel profiling
> #
> +CONFIG_GCOV_KERNEL=y
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> @@ -1524,7 +1528,7 @@
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_STRIP_ASM_SYMS=y
> # CONFIG_UNUSED_SYMBOLS is not set
> -# CONFIG_DEBUG_FS is not set
> +CONFIG_DEBUG_FS=y
> CONFIG_HEADERS_CHECK=y
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> CONFIG_DEBUG_KERNEL=y
Confirmed. Disabling CONFIG_GCOV_KERNEL was the only change I made.
Kernel boot log attached.
Regards,
jer
[-- Attachment #2: gcov_panic --]
[-- Type: application/octet-stream, Size: 4496 bytes --]
HARD Booted.
palo ipl 1.18 portage@elmer Thu Oct 20 17:20:29 CEST 2011
Partition Start(MB) End(MB) Id Type
1 1 16 f0 Palo
2 17 112 83 ext2
3 113 601 82 swap
4 602 15860 83 ext2
PALO(F0) partition contains:
0/vmlinux64 7454798 bytes @ 0x44000
Command line for kernel: 'root=/dev/sda4 console=ttyS0 netconsole=@10.0.0.140/,@10.0.0.153/ video=matroxfb:vesa:0x117 rootfstype=ext4 palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 4321280 mediaptr 0x1000
Segment 1 load 00574000 size 110592 mediaptr 0x420000
Segment 2 load 0058f000 size 99856 mediaptr 0x43b000
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.6-JeR (root@elmer) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #4 PREEMPT Thu Oct 27 18:28:28 CEST 2011
[ 0.000000] unwind_init: start = 0x1048d000, end = 0x104c1cc0, entries = 13516
[ 0.000000] FP[0] enabled: Rev 1 Model 19
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 00005dc0 00000481 00000000 00000002 78123fb2 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000203
[ 0.000000] CPUID vers 19 rev 7 (0x00000267)
[ 0.000000] capabilities 0x7
[ 0.000000] model 9000/785/C3650
[ 0.000000] Total Memory: 2048 MB
[ 0.000000] LCD display at f05d0008,f05d0000 registered
[ 0.000000] Backtrace:
[ 0.000000] [<1057b4c4>] setup_per_cpu_areas+0xb8/0xdc
[ 0.000000] [<10574750>] start_kernel+0x118/0x398
[ 0.000000] [<101148fc>] start_parisc+0x4c/0x68
[ 0.000000]
[ 0.000000]
[ 0.000000] Kernel Fault: Code=26 regs=104c4240 (Addr=1058fe80)
[ 0.000000]
[ 0.000000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[ 0.000000] PSW: 00000000000001001111111100001110 Not tainted
[ 0.000000] r00-03 0004ff0e 1055b800 1057b198 116d0240
[ 0.000000] r04-07 00000000 116d2000 116da180 00000008
[ 0.000000] r08-11 116da180 116da0c0 0004000e 101148b4
[ 0.000000] r12-15 00000000 ffffffff 00000000 f0400004
[ 0.000000] r16-19 f0000884 f000017c f0000174 1058fe80
[ 0.000000] r20-23 00000000 116da1ac 00000000 00000001
[ 0.000000] r24-27 00000000 000000ff 116da1a8 104c8000
[ 0.000000] r28-31 00000000 102b5430 104c4240 00000003
[ 0.000000] sr00-03 00000000 00000000 00000000 00000000
[ 0.000000] sr04-07 00000000 00000000 00000000 00000000
[ 0.000000]
[ 0.000000] IASQ: 00000000 00000000 IAOQ: 1057b224 1057b228
[ 0.000000] IIR: 0e741280 ISR: 00000000 IOR: 1058fe80
[ 0.000000] CPU: 0 CR30: 104c4000 CR31: fefff7ff
[ 0.000000] ORIG_R28: 104c42d8
[ 0.000000] IAOQ[0]: pcpu_setup_first_chunk+0x630/0x818
[ 0.000000] IAOQ[1]: pcpu_setup_first_chunk+0x634/0x818
[ 0.000000] RP(r2): pcpu_setup_first_chunk+0x5a4/0x818
[ 0.000000] Backtrace:
[ 0.000000] [<1057b4c4>] setup_per_cpu_areas+0xb8/0xdc
[ 0.000000] [<10574750>] start_kernel+0x118/0x398
[ 0.000000] [<101148fc>] start_parisc+0x4c/0x68
[ 0.000000]
[ 0.000000] Kernel panic - not syncing: Kernel Fault
[ 0.000000] Backtrace:
[ 0.000000] [<1010f9ec>] panic+0xa4/0x268
[ 0.000000] [<1011535c>] parisc_terminate+0x100/0x104
[ 0.000000] [<10115970>] handle_interruption+0x610/0x63c
[ 0.000000] [<10104078>] intr_check_sig+0x0/0x34
[ 0.000000] [<101101e0>] preempt_schedule+0x48/0x78
[ 0.000000] [<101365d4>] vprintk+0x404/0x454
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000] [<101148b4>] start_parisc+0x4/0x68
[ 0.000000]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:00 ` Kyle McMartin
2011-09-06 14:15 ` James Bottomley
@ 2011-09-06 14:41 ` John David Anglin
2011-09-06 15:06 ` Rolf Eike Beer
1 sibling, 1 reply; 23+ messages in thread
From: John David Anglin @ 2011-09-06 14:41 UTC (permalink / raw)
To: Kyle McMartin; +Cc: Rolf Eike Beer, linux-parisc
On 9/6/2011 10:00 AM, Kyle McMartin wrote:
> On Tue, Sep 06, 2011 at 09:46:11AM -0400, Kyle McMartin wrote:
>>>>> I suspect bootmem changes have broken somewhere on 32-bit... try
>>>>> inserting a few printk between each of the function calls at the start
>>>>> of paging_init to try to narrow down exactly where it fails.
>>>> It's flush_cache_all_local() that fails.
>>> 2.6.39.4 works.
>>>
>> Well... that's weird.
>>
> 0: 43 ff ff 40 ldb 7fa0(r31),r31
>
> Is the faulting insn, and %r31 is 00000000... so
> we're looking at 32672, which looks suspiciously like
> a negative offset from 32768.
>
> Looks like it's a null pointer dereference, there shouldn't be anything
> useful at this address, if I remember our address space map correctly.
The fault was code 7. Also, I don't think this instruction is in
flush_cache_all_local
(at least I don't see it in 64-bit kernel). So, I think the problem is
in setting up the address
space map.
In my testing with 64-bit kernels, I have noticed that the first call to
flush_cache_range
doesn't have a range consistent with our 32-bit user address space.
Dave
--
John David Anglin dave.anglin@bell.net
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-06 14:41 ` John David Anglin
@ 2011-09-06 15:06 ` Rolf Eike Beer
0 siblings, 0 replies; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-06 15:06 UTC (permalink / raw)
To: linux-parisc
> On 9/6/2011 10:00 AM, Kyle McMartin wrote:
>> On Tue, Sep 06, 2011 at 09:46:11AM -0400, Kyle McMartin wrote:
>>>>>> I suspect bootmem changes have broken somewhere on 32-bit... try
>>>>>> inserting a few printk between each of the function calls at the
>>>>>> start
>>>>>> of paging_init to try to narrow down exactly where it fails.
>>>>> It's flush_cache_all_local() that fails.
>>>> 2.6.39.4 works.
>>>>
>>> Well... that's weird.
>>>
>> 0: 43 ff ff 40 ldb 7fa0(r31),r31
>>
>> Is the faulting insn, and %r31 is 00000000... so
>> we're looking at 32672, which looks suspiciously like
>> a negative offset from 32768.
>>
>> Looks like it's a null pointer dereference, there shouldn't be anything
>> useful at this address, if I remember our address space map correctly.
> The fault was code 7. Also, I don't think this instruction is in
> flush_cache_all_local
> (at least I don't see it in 64-bit kernel). So, I think the problem is
> in setting up the address
> space map.
>
> In my testing with 64-bit kernels, I have noticed that the first call to
> flush_cache_range
> doesn't have a range consistent with our 32-bit user address space.
This is a 32 bit kernel.
Eike
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-08-19 17:58 Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7) Rolf Eike Beer
2011-08-31 9:54 ` Rolf Eike Beer
@ 2011-09-04 1:46 ` John David Anglin
2011-09-04 16:35 ` Rolf Eike Beer
1 sibling, 1 reply; 23+ messages in thread
From: John David Anglin @ 2011-09-04 1:46 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On 19-Aug-11, at 1:58 PM, Rolf Eike Beer wrote:
> unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
> WARNING: Out of order unwind entry! 105041f0 and 10504200
> WARNING: Out of order unwind entry! 10504200 and 10504210
> WARNING: Out of order unwind entry! 10504cf0 and 10504d00
> WARNING: Out of order unwind entry! 10504d00 and 10504d10
This is fixed in current binutils. Current binutils also fixes non
equivalent aliasing
bug that affects PA8800/PA8900 systems.
> IASQ: 00000000 00000000 IAOQ: 1010047c 10100480
IAOQ head provides the location of interruption. It was a instruction
memory
protection fault. Since this is a kernel address, this likely
indicates the page
tables weren't setup correctly, or the instruction cache wasn't
flushed correctly.
I'm thinking it would help to localize the change that introduced the
interruption.
Dave
--
John David Anglin dave.anglin@bell.net
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-04 1:46 ` John David Anglin
@ 2011-09-04 16:35 ` Rolf Eike Beer
2011-09-04 17:59 ` John David Anglin
0 siblings, 1 reply; 23+ messages in thread
From: Rolf Eike Beer @ 2011-09-04 16:35 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: Type: text/plain, Size: 1003 bytes --]
You wrote:
> On 19-Aug-11, at 1:58 PM, Rolf Eike Beer wrote:
> > unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
> > WARNING: Out of order unwind entry! 105041f0 and 10504200
> > WARNING: Out of order unwind entry! 10504200 and 10504210
> > WARNING: Out of order unwind entry! 10504cf0 and 10504d00
> > WARNING: Out of order unwind entry! 10504d00 and 10504d10
>
> This is fixed in current binutils. Current binutils also fixes non
> equivalent aliasing
> bug that affects PA8800/PA8900 systems.
The kernel.org or the GNU version?
> > IASQ: 00000000 00000000 IAOQ: 1010047c 10100480
>
> IAOQ head provides the location of interruption. It was a instruction
> memory
> protection fault. Since this is a kernel address, this likely
> indicates the page
> tables weren't setup correctly, or the instruction cache wasn't
> flushed correctly.
>
> I'm thinking it would help to localize the change that introduced the
> interruption.
I'll try to bisect this in the next days.
Eike
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
2011-09-04 16:35 ` Rolf Eike Beer
@ 2011-09-04 17:59 ` John David Anglin
0 siblings, 0 replies; 23+ messages in thread
From: John David Anglin @ 2011-09-04 17:59 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-parisc
On 4-Sep-11, at 12:35 PM, Rolf Eike Beer wrote:
> You wrote:
>> On 19-Aug-11, at 1:58 PM, Rolf Eike Beer wrote:
>>> unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
>>> WARNING: Out of order unwind entry! 105041f0 and 10504200
>>> WARNING: Out of order unwind entry! 10504200 and 10504210
>>> WARNING: Out of order unwind entry! 10504cf0 and 10504d00
>>> WARNING: Out of order unwind entry! 10504d00 and 10504d10
>>
>> This is fixed in current binutils. Current binutils also fixes non
>> equivalent aliasing
>> bug that affects PA8800/PA8900 systems.
>
> The kernel.org or the GNU version?
I don't recall exactly the kernel version. Helge made the changes.
The binutils changes for it are in 2.21 and head. They were applied
in the latter part of 2009.
The equivalent aliasing fix is also in 2.21 and head. However,
it wasn't in the initial 2.21 release.
Dave
--
John David Anglin dave.anglin@bell.net
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2011-10-28 15:11 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-08-19 17:58 Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7) Rolf Eike Beer
2011-08-31 9:54 ` Rolf Eike Beer
2011-08-31 15:48 ` Kyle McMartin
2011-08-31 16:04 ` Kyle McMartin
2011-09-01 19:13 ` Rolf Eike Beer
2011-09-02 10:30 ` Rolf Eike Beer
2011-09-06 7:40 ` Rolf Eike Beer
2011-09-06 13:46 ` Kyle McMartin
2011-09-06 14:00 ` Kyle McMartin
2011-09-06 14:15 ` James Bottomley
2011-09-06 14:20 ` Kyle McMartin
2011-09-06 15:06 ` Rolf Eike Beer
2011-09-07 8:00 ` Rolf Eike Beer
2011-10-12 7:26 ` Rolf Eike Beer
2011-10-12 13:41 ` James Bottomley
2011-10-18 15:51 ` James Bottomley
2011-10-26 13:02 ` Rolf Eike Beer
2011-10-28 15:11 ` Jeroen Roovers
2011-09-06 14:41 ` John David Anglin
2011-09-06 15:06 ` Rolf Eike Beer
2011-09-04 1:46 ` John David Anglin
2011-09-04 16:35 ` Rolf Eike Beer
2011-09-04 17:59 ` John David Anglin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.