[PATCH] distclean: Remove generated .dtb files

[dirk.behme@googlemail.com (Dirk Behme)]

On 06.11.2011 19:42, Grant Likely wrote:
> On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely<grant.likely@secretlab.ca>  wrote:
>> On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote:
>>> The patch 'arm/dt: Add dtb make rule' adds support to
>>> create a .dtb file. But this is never removed afterwards.
>>> Remove the generated .dtb file if 'distclean' is called.
>>>
>>> Signed-off-by: Dirk Behme<dirk.behme@de.bosch.com>
>>> CC: Rob Herring<rob.herring@calxeda.com>
>>> CC: Shawn Guo<shawn.guo@freescale.com>
>>> CC: Jason Liu<jason.hui@linaro.org>
>>> CC: Grant Likely<grant.likely@secretlab.ca>
>>
>> Acked-by: Grant Likely<grant.likely@secretlab.ca>
>
> ... although why are only the .dtb files needed in the clean list?
> How are the other built files cleaned?  'make clean' does remove the
> other images, but I don't know what the mechanism is.

A lot of stuff is removed by the top level Makefile [1]. But as the 
patch "arm/dt: Add dtb make rule" adds the .dtb generation to 
arch/arm/boot/Makefile, we thought it would be a good place to add the 
removal of that file there, too.

Hmm, not sure if this answers your question, though ;)

Best regards

Dirk

[1] 
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=Makefile;h=ed25c5b35470dc2035f8b024994fa6cb7cecaca6;hb=HEAD#l1188

>>
>>> ---
>>>   arch/arm/boot/Makefile |    2 ++
>>>   1 files changed, 2 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
>>> index 1cd9b0a..08f0d35 100644
>>> --- a/arch/arm/boot/Makefile
>>> +++ b/arch/arm/boot/Makefile
>>> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
>>>
>>>   $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
>>>
>>> +clean-files := *.dtb
>>> +
>>>   quiet_cmd_uimage = UIMAGE  $@
>>>         cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
>>>                   -C none -a $(LOADADDR) -e $(STARTADDR) \
>>> --
>>> 1.7.0.4
>>>
>>
>
>
>