* [PATCH] distclean: Remove generated .dtb files @ 2011-11-05 6:19 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-05 6:19 UTC (permalink / raw) To: linux-arm-kernel The patch 'arm/dt: Add dtb make rule' adds support to create a .dtb file. But this is never removed afterwards. Remove the generated .dtb file if 'distclean' is called. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Rob Herring <rob.herring@calxeda.com> CC: Shawn Guo <shawn.guo@freescale.com> CC: Jason Liu <jason.hui@linaro.org> CC: Grant Likely <grant.likely@secretlab.ca> --- arch/arm/boot/Makefile | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 1cd9b0a..08f0d35 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) +clean-files := *.dtb + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-05 6:19 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-05 6:19 UTC (permalink / raw) To: linaro-dev, devicetree-discuss, linux-arm-kernel, rob.herring, grant.likely Cc: Grant Likely, Dirk Behme, Jason Liu, Shawn Guo The patch 'arm/dt: Add dtb make rule' adds support to create a .dtb file. But this is never removed afterwards. Remove the generated .dtb file if 'distclean' is called. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Rob Herring <rob.herring@calxeda.com> CC: Shawn Guo <shawn.guo@freescale.com> CC: Jason Liu <jason.hui@linaro.org> CC: Grant Likely <grant.likely@secretlab.ca> --- arch/arm/boot/Makefile | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 1cd9b0a..08f0d35 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) +clean-files := *.dtb + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ -- 1.7.0.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-06 18:38 ` Grant Likely 0 siblings, 0 replies; 13+ messages in thread From: Grant Likely @ 2011-11-06 18:38 UTC (permalink / raw) To: linux-arm-kernel On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: > The patch 'arm/dt: Add dtb make rule' adds support to > create a .dtb file. But this is never removed afterwards. > Remove the generated .dtb file if 'distclean' is called. > > Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> > CC: Rob Herring <rob.herring@calxeda.com> > CC: Shawn Guo <shawn.guo@freescale.com> > CC: Jason Liu <jason.hui@linaro.org> > CC: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> > --- > arch/arm/boot/Makefile | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > index 1cd9b0a..08f0d35 100644 > --- a/arch/arm/boot/Makefile > +++ b/arch/arm/boot/Makefile > @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts > > $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) > > +clean-files := *.dtb > + > quiet_cmd_uimage = UIMAGE $@ > cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ > -C none -a $(LOADADDR) -e $(STARTADDR) \ > -- > 1.7.0.4 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] distclean: Remove generated .dtb files @ 2011-11-06 18:38 ` Grant Likely 0 siblings, 0 replies; 13+ messages in thread From: Grant Likely @ 2011-11-06 18:38 UTC (permalink / raw) To: Dirk Behme Cc: Dirk Behme, linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Jason Liu, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, grant.likely-QSEj5FYQhm4dnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: > The patch 'arm/dt: Add dtb make rule' adds support to > create a .dtb file. But this is never removed afterwards. > Remove the generated .dtb file if 'distclean' is called. > > Signed-off-by: Dirk Behme <dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> > CC: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> > CC: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > CC: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > CC: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> > --- > arch/arm/boot/Makefile | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > index 1cd9b0a..08f0d35 100644 > --- a/arch/arm/boot/Makefile > +++ b/arch/arm/boot/Makefile > @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts > > $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) > > +clean-files := *.dtb > + > quiet_cmd_uimage = UIMAGE $@ > cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ > -C none -a $(LOADADDR) -e $(STARTADDR) \ > -- > 1.7.0.4 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-06 18:42 ` Grant Likely 0 siblings, 0 replies; 13+ messages in thread From: Grant Likely @ 2011-11-06 18:42 UTC (permalink / raw) To: linux-arm-kernel On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely <grant.likely@secretlab.ca> wrote: > On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >> The patch 'arm/dt: Add dtb make rule' adds support to >> create a .dtb file. But this is never removed afterwards. >> Remove the generated .dtb file if 'distclean' is called. >> >> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> >> CC: Rob Herring <rob.herring@calxeda.com> >> CC: Shawn Guo <shawn.guo@freescale.com> >> CC: Jason Liu <jason.hui@linaro.org> >> CC: Grant Likely <grant.likely@secretlab.ca> > > Acked-by: Grant Likely <grant.likely@secretlab.ca> ... although why are only the .dtb files needed in the clean list? How are the other built files cleaned? 'make clean' does remove the other images, but I don't know what the mechanism is. g. > >> --- >> ?arch/arm/boot/Makefile | ? ?2 ++ >> ?1 files changed, 2 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index 1cd9b0a..08f0d35 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >> >> ?$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >> >> +clean-files := *.dtb >> + >> ?quiet_cmd_uimage = UIMAGE ?$@ >> ? ? ? ?cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >> ? ? ? ? ? ? ? ? ?-C none -a $(LOADADDR) -e $(STARTADDR) \ >> -- >> 1.7.0.4 >> > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] distclean: Remove generated .dtb files @ 2011-11-06 18:42 ` Grant Likely 0 siblings, 0 replies; 13+ messages in thread From: Grant Likely @ 2011-11-06 18:42 UTC (permalink / raw) To: Dirk Behme Cc: Dirk Behme, linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Jason Liu, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, grant.likely-QSEj5FYQhm4dnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote: > On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >> The patch 'arm/dt: Add dtb make rule' adds support to >> create a .dtb file. But this is never removed afterwards. >> Remove the generated .dtb file if 'distclean' is called. >> >> Signed-off-by: Dirk Behme <dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> >> CC: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> >> CC: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> >> CC: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> CC: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> > > Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> ... although why are only the .dtb files needed in the clean list? How are the other built files cleaned? 'make clean' does remove the other images, but I don't know what the mechanism is. g. > >> --- >> arch/arm/boot/Makefile | 2 ++ >> 1 files changed, 2 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index 1cd9b0a..08f0d35 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >> >> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >> >> +clean-files := *.dtb >> + >> quiet_cmd_uimage = UIMAGE $@ >> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >> -C none -a $(LOADADDR) -e $(STARTADDR) \ >> -- >> 1.7.0.4 >> > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-07 6:25 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-07 6:25 UTC (permalink / raw) To: linux-arm-kernel On 06.11.2011 19:42, Grant Likely wrote: > On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely<grant.likely@secretlab.ca> wrote: >> On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >>> The patch 'arm/dt: Add dtb make rule' adds support to >>> create a .dtb file. But this is never removed afterwards. >>> Remove the generated .dtb file if 'distclean' is called. >>> >>> Signed-off-by: Dirk Behme<dirk.behme@de.bosch.com> >>> CC: Rob Herring<rob.herring@calxeda.com> >>> CC: Shawn Guo<shawn.guo@freescale.com> >>> CC: Jason Liu<jason.hui@linaro.org> >>> CC: Grant Likely<grant.likely@secretlab.ca> >> >> Acked-by: Grant Likely<grant.likely@secretlab.ca> > > ... although why are only the .dtb files needed in the clean list? > How are the other built files cleaned? 'make clean' does remove the > other images, but I don't know what the mechanism is. A lot of stuff is removed by the top level Makefile [1]. But as the patch "arm/dt: Add dtb make rule" adds the .dtb generation to arch/arm/boot/Makefile, we thought it would be a good place to add the removal of that file there, too. Hmm, not sure if this answers your question, though ;) Best regards Dirk [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=Makefile;h=ed25c5b35470dc2035f8b024994fa6cb7cecaca6;hb=HEAD#l1188 >> >>> --- >>> arch/arm/boot/Makefile | 2 ++ >>> 1 files changed, 2 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >>> index 1cd9b0a..08f0d35 100644 >>> --- a/arch/arm/boot/Makefile >>> +++ b/arch/arm/boot/Makefile >>> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >>> >>> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >>> >>> +clean-files := *.dtb >>> + >>> quiet_cmd_uimage = UIMAGE $@ >>> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >>> -C none -a $(LOADADDR) -e $(STARTADDR) \ >>> -- >>> 1.7.0.4 >>> >> > > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] distclean: Remove generated .dtb files @ 2011-11-07 6:25 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-07 6:25 UTC (permalink / raw) To: Grant Likely Cc: linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, grant.likely-QSEj5FYQhm4dnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On 06.11.2011 19:42, Grant Likely wrote: > On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote: >> On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >>> The patch 'arm/dt: Add dtb make rule' adds support to >>> create a .dtb file. But this is never removed afterwards. >>> Remove the generated .dtb file if 'distclean' is called. >>> >>> Signed-off-by: Dirk Behme<dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> >>> CC: Rob Herring<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> >>> CC: Shawn Guo<shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> >>> CC: Jason Liu<jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> CC: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> >> >> Acked-by: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> > > ... although why are only the .dtb files needed in the clean list? > How are the other built files cleaned? 'make clean' does remove the > other images, but I don't know what the mechanism is. A lot of stuff is removed by the top level Makefile [1]. But as the patch "arm/dt: Add dtb make rule" adds the .dtb generation to arch/arm/boot/Makefile, we thought it would be a good place to add the removal of that file there, too. Hmm, not sure if this answers your question, though ;) Best regards Dirk [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=Makefile;h=ed25c5b35470dc2035f8b024994fa6cb7cecaca6;hb=HEAD#l1188 >> >>> --- >>> arch/arm/boot/Makefile | 2 ++ >>> 1 files changed, 2 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >>> index 1cd9b0a..08f0d35 100644 >>> --- a/arch/arm/boot/Makefile >>> +++ b/arch/arm/boot/Makefile >>> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >>> >>> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >>> >>> +clean-files := *.dtb >>> + >>> quiet_cmd_uimage = UIMAGE $@ >>> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >>> -C none -a $(LOADADDR) -e $(STARTADDR) \ >>> -- >>> 1.7.0.4 >>> >> > > > ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <4EB779CF.4040007-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH] distclean: Remove generated .dtb files [not found] ` <4EB779CF.4040007-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> @ 2011-11-07 13:42 ` Grant Likely 0 siblings, 0 replies; 13+ messages in thread From: Grant Likely @ 2011-11-07 13:42 UTC (permalink / raw) To: Dirk Behme Cc: Dirk Behme, linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Jason Liu, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r [-- Attachment #1.1: Type: text/plain, Size: 1516 bytes --] On Nov 6, 2011 11:25 PM, "Dirk Behme" <dirk.behme-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> wrote: > > On 06.11.2011 19:42, Grant Likely wrote: >> >> On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> wrote: >>> >>> On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote: >>>> >>>> The patch 'arm/dt: Add dtb make rule' adds support to >>>> create a .dtb file. But this is never removed afterwards. >>>> Remove the generated .dtb file if 'distclean' is called. >>>> >>>> Signed-off-by: Dirk Behme<dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> >>>> CC: Rob Herring<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> >>>> CC: Shawn Guo<shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> >>>> CC: Jason Liu<jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> CC: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> >>> >>> >>> Acked-by: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> >> >> >> ... although why are only the .dtb files needed in the clean list? >> How are the other built files cleaned? 'make clean' does remove the >> other images, but I don't know what the mechanism is. > > > A lot of stuff is removed by the top level Makefile [1]. But as the patch "arm/dt: Add dtb make rule" adds the .dtb generation to arch/arm/boot/Makefile, we thought it would be a good place to add the removal of that file there, too. > > Hmm, not sure if this answers your question, though ;) Okay. Good enough for me. g. [-- Attachment #1.2: Type: text/html, Size: 2487 bytes --] [-- Attachment #2: Type: text/plain, Size: 192 bytes --] _______________________________________________ devicetree-discuss mailing list devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org https://lists.ozlabs.org/listinfo/devicetree-discuss ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-07 13:51 ` Rob Herring 0 siblings, 0 replies; 13+ messages in thread From: Rob Herring @ 2011-11-07 13:51 UTC (permalink / raw) To: linux-arm-kernel On 11/05/2011 01:19 AM, Dirk Behme wrote: > The patch 'arm/dt: Add dtb make rule' adds support to > create a .dtb file. But this is never removed afterwards. > Remove the generated .dtb file if 'distclean' is called. > > Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> > CC: Rob Herring <rob.herring@calxeda.com> > CC: Shawn Guo <shawn.guo@freescale.com> > CC: Jason Liu <jason.hui@linaro.org> > CC: Grant Likely <grant.likely@secretlab.ca> > --- Acked-by: Rob Herring <rob.herring@calxeda.com> > arch/arm/boot/Makefile | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > index 1cd9b0a..08f0d35 100644 > --- a/arch/arm/boot/Makefile > +++ b/arch/arm/boot/Makefile > @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts > > $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) > > +clean-files := *.dtb > + > quiet_cmd_uimage = UIMAGE $@ > cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ > -C none -a $(LOADADDR) -e $(STARTADDR) \ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] distclean: Remove generated .dtb files @ 2011-11-07 13:51 ` Rob Herring 0 siblings, 0 replies; 13+ messages in thread From: Rob Herring @ 2011-11-07 13:51 UTC (permalink / raw) To: Dirk Behme Cc: Dirk Behme, linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Jason Liu, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, grant.likely-QSEj5FYQhm4dnm+yROfE0A On 11/05/2011 01:19 AM, Dirk Behme wrote: > The patch 'arm/dt: Add dtb make rule' adds support to > create a .dtb file. But this is never removed afterwards. > Remove the generated .dtb file if 'distclean' is called. > > Signed-off-by: Dirk Behme <dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> > CC: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> > CC: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > CC: Jason Liu <jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > CC: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> > --- Acked-by: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> > arch/arm/boot/Makefile | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile > index 1cd9b0a..08f0d35 100644 > --- a/arch/arm/boot/Makefile > +++ b/arch/arm/boot/Makefile > @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts > > $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) > > +clean-files := *.dtb > + > quiet_cmd_uimage = UIMAGE $@ > cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ > -C none -a $(LOADADDR) -e $(STARTADDR) \ ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] distclean: Remove generated .dtb files @ 2011-11-08 17:20 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-08 17:20 UTC (permalink / raw) To: linux-arm-kernel On 07.11.2011 14:51, Rob Herring wrote: > On 11/05/2011 01:19 AM, Dirk Behme wrote: >> The patch 'arm/dt: Add dtb make rule' adds support to >> create a .dtb file. But this is never removed afterwards. >> Remove the generated .dtb file if 'distclean' is called. >> >> Signed-off-by: Dirk Behme<dirk.behme@de.bosch.com> >> CC: Rob Herring<rob.herring@calxeda.com> >> CC: Shawn Guo<shawn.guo@freescale.com> >> CC: Jason Liu<jason.hui@linaro.org> >> CC: Grant Likely<grant.likely@secretlab.ca> >> --- > > Acked-by: Rob Herring<rob.herring@calxeda.com> ... > Acked-by: Grant Likely <grant.likely@secretlab.ca> Submitted to Russell King's Patch Tracking System: http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7152/1 Thanks Dirk >> arch/arm/boot/Makefile | 2 ++ >> 1 files changed, 2 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index 1cd9b0a..08f0d35 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >> >> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >> >> +clean-files := *.dtb >> + >> quiet_cmd_uimage = UIMAGE $@ >> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >> -C none -a $(LOADADDR) -e $(STARTADDR) \ > > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH] distclean: Remove generated .dtb files @ 2011-11-08 17:20 ` Dirk Behme 0 siblings, 0 replies; 13+ messages in thread From: Dirk Behme @ 2011-11-08 17:20 UTC (permalink / raw) To: Rob Herring, Grant Likely Cc: Dirk Behme, linaro-dev-cunTk1MwBs8s++Sfvej+rw, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Jason Liu, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, grant.likely-QSEj5FYQhm4dnm+yROfE0A On 07.11.2011 14:51, Rob Herring wrote: > On 11/05/2011 01:19 AM, Dirk Behme wrote: >> The patch 'arm/dt: Add dtb make rule' adds support to >> create a .dtb file. But this is never removed afterwards. >> Remove the generated .dtb file if 'distclean' is called. >> >> Signed-off-by: Dirk Behme<dirk.behme-V5te9oGctAVWk0Htik3J/w@public.gmane.org> >> CC: Rob Herring<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> >> CC: Shawn Guo<shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> >> CC: Jason Liu<jason.hui-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> CC: Grant Likely<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> >> --- > > Acked-by: Rob Herring<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org> ... > Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org> Submitted to Russell King's Patch Tracking System: http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7152/1 Thanks Dirk >> arch/arm/boot/Makefile | 2 ++ >> 1 files changed, 2 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile >> index 1cd9b0a..08f0d35 100644 >> --- a/arch/arm/boot/Makefile >> +++ b/arch/arm/boot/Makefile >> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts >> >> $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) >> >> +clean-files := *.dtb >> + >> quiet_cmd_uimage = UIMAGE $@ >> cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ >> -C none -a $(LOADADDR) -e $(STARTADDR) \ > > ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-11-08 17:20 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-11-05 6:19 [PATCH] distclean: Remove generated .dtb files Dirk Behme
2011-11-05 6:19 ` Dirk Behme
2011-11-06 18:38 ` Grant Likely
2011-11-06 18:38 ` Grant Likely
2011-11-06 18:42 ` Grant Likely
2011-11-06 18:42 ` Grant Likely
2011-11-07 6:25 ` Dirk Behme
2011-11-07 6:25 ` Dirk Behme
[not found] ` <4EB779CF.4040007-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2011-11-07 13:42 ` Grant Likely
2011-11-07 13:51 ` Rob Herring
2011-11-07 13:51 ` Rob Herring
2011-11-08 17:20 ` Dirk Behme
2011-11-08 17:20 ` Dirk Behme
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.