From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: netdev@vger.kernel.org, linux-can@vger.kernel.org,
"Reuben Dowle" <Reuben.Dowle@navico.com>,
"Lothar Waßmann" <LW@KARO-electronics.de>
Subject: Re: [PATCH] can: flexcan: fix irq flooding by clearing all interrupt sources
Date: Mon, 12 Dec 2011 16:31:09 +0100 [thread overview]
Message-ID: <4EE61E3D.2090303@pengutronix.de> (raw)
In-Reply-To: <4EE61928.10608@grandegger.com>
[-- Attachment #1: Type: text/plain, Size: 2133 bytes --]
On 12/12/2011 04:09 PM, Wolfgang Grandegger wrote:
> As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT,
> RWRN_INT, BOFF_INT interrupt sources need to be cleared as well
> to avoid interrupt flooding, at least for the Flexcan on i.MX28
> SOCs. Furthermore, the interrupts are only cleared, if really one
> of those interrupt sources are pending (which is not the case for
> rx and tx done).
>
> CC: Reuben Dowle <Reuben.Dowle@navico.com>
> CC: Lothar Waßmann <LW@KARO-electronics.de>
> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Have you tested on mx25/mx35, does it have any negative side effects?
My schedule is full until Friday, sorry cannot test here.
Marc
> ---
> drivers/net/can/flexcan.c | 7 ++++++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index 165a4c7..111f154 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -118,6 +118,9 @@
> (FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | FLEXCAN_ESR_BOFF_INT)
> #define FLEXCAN_ESR_ERR_ALL \
> (FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)
> +#define FLEXCAN_ESR_ALL_INT \
> + (FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
> + FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
>
> /* FLEXCAN interrupt flag register (IFLAG) bits */
> #define FLEXCAN_TX_BUF_ID 8
> @@ -577,7 +580,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
>
> reg_iflag1 = flexcan_read(®s->iflag1);
> reg_esr = flexcan_read(®s->esr);
> - flexcan_write(FLEXCAN_ESR_ERR_INT, ®s->esr); /* ACK err IRQ */
> + /* ACK all bus error and state change IRQ sources */
> + if (reg_esr & FLEXCAN_ESR_ALL_INT)
> + flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT, ®s->esr);
>
> /*
> * schedule NAPI in case of:
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2011-12-12 15:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 15:09 [PATCH] can: flexcan: fix irq flooding by clearing all interrupt sources Wolfgang Grandegger
2011-12-12 15:31 ` Marc Kleine-Budde [this message]
2011-12-12 15:44 ` Wolfgang Grandegger
2011-12-13 12:13 ` Wolfgang Grandegger
2011-12-13 12:53 ` Marc Kleine-Budde
2011-12-13 12:53 ` Wolfgang Grandegger
2011-12-13 12:59 ` Marc Kleine-Budde
2011-12-13 16:22 ` Wolfgang Grandegger
2011-12-14 13:21 ` Wolfgang Grandegger
2012-01-31 21:59 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE61E3D.2090303@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=LW@KARO-electronics.de \
--cc=Reuben.Dowle@navico.com \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.