All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: netdev@vger.kernel.org, linux-can@vger.kernel.org,
	"Reuben Dowle" <Reuben.Dowle@navico.com>,
	"Lothar Waßmann" <LW@KARO-electronics.de>
Subject: Re: [PATCH] can: flexcan: fix irq flooding by clearing all interrupt sources
Date: Tue, 13 Dec 2011 13:53:04 +0100	[thread overview]
Message-ID: <4EE74AB0.1080106@pengutronix.de> (raw)
In-Reply-To: <4EE7416E.8070203@grandegger.com>

[-- Attachment #1: Type: text/plain, Size: 2072 bytes --]

On 12/13/2011 01:13 PM, Wolfgang Grandegger wrote:
> On 12/12/2011 04:44 PM, Wolfgang Grandegger wrote:
>> On 12/12/2011 04:31 PM, Marc Kleine-Budde wrote:
>>> On 12/12/2011 04:09 PM, Wolfgang Grandegger wrote:
>>>> As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT,
>>>> RWRN_INT, BOFF_INT interrupt sources need to be cleared as well
>>>> to avoid interrupt flooding, at least for the Flexcan on i.MX28
>>>> SOCs. Furthermore, the interrupts are only cleared, if really one
>>>> of those interrupt sources are pending (which is not the case for
>>>> rx and tx done).
>>>>
>>>> CC: Reuben Dowle <Reuben.Dowle@navico.com>
>>>> CC: Lothar Waßmann <LW@KARO-electronics.de>
>>>> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
>>>
>>> Have you tested on mx25/mx35, does it have any negative side effects?
>>> My schedule is full until Friday, sorry cannot test here.
>>
>> Not yet. But it's not critical. Only the pending interrupt flags are
>> cleared. Maybe somebody else out there could do some testing... before I
>> get hold of a MX35PDK board.
> 
> I got my MX35PDK board working and can confirm, that the patch works on
> a i.mx35 as well. My testing also confirms, that the ESR TWRN_INT,
> RWRN_INT, FLEXCAN_ESR_BOFF_INT do not function as documented. These
> flags do show up once, together with ERR_INT, and then, after clearing,
> never again. Obviously a bug in the Flexcan logic. From the feedback we
> can say, that only the i.MX28 does behave differently (==correctly). All
> other seem to work with the current code:
> 
>  Flexcan on
>  - i.mx25
>  - i.mx35
>  - i.mx53
>  - P1010/P1020

I'm adding the patch to linux-can. I think this is a stable candidate
for v2.6.39 and newer (mx28 suport was added in 2.6.39).

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

  reply	other threads:[~2011-12-13 12:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-12 15:09 [PATCH] can: flexcan: fix irq flooding by clearing all interrupt sources Wolfgang Grandegger
2011-12-12 15:31 ` Marc Kleine-Budde
2011-12-12 15:44   ` Wolfgang Grandegger
2011-12-13 12:13     ` Wolfgang Grandegger
2011-12-13 12:53       ` Marc Kleine-Budde [this message]
2011-12-13 12:53       ` Wolfgang Grandegger
2011-12-13 12:59         ` Marc Kleine-Budde
2011-12-13 16:22           ` Wolfgang Grandegger
2011-12-14 13:21             ` Wolfgang Grandegger
2012-01-31 21:59 ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EE74AB0.1080106@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=LW@KARO-electronics.de \
    --cc=Reuben.Dowle@navico.com \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.