[Xenomai-core] Is there Xenomai support for the Freescale P1020 processor?

[Xenomai-core] Is there Xenomai support for the Freescale P1020 processor?

[makarand pradhan]

[-- Attachment #1: Type: text/plain, Size: 401 bytes --]

Greetings All,

We note the QorlQ processors, and the Freescale e500 PowerPC architecture
is not on the list of Supported Architectures at http://www.xenomai.org/index.php/Embedded_Device_Support.
On the other hand, that document states that the QorIQ P2020
is supported under "Supported Evaluation Boards". 
Can you pl comment if the P1020 is supported or is going to be supported?

Rgds,

Makarand. 

[-- Attachment #2: Type: text/html, Size: 794 bytes --]

[Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[makarand pradhan]

[-- Attachment #1: Type: text/plain, Size: 416 bytes --]

Greetings All,



We note the QorlQ processors, and the Freescale e500 PowerPC architecture
is not on the list of Supported Architectures at
http://www.xenomai.org/index.php/Embedded_Device_Support.
On the other hand, that document states that the QorIQ P2020
is supported under "Supported Evaluation Boards". 
Can anyone pl comment if the P1020 is supported or is going to be supported?
Thanks and Rgds,

Makarand. 

[-- Attachment #2: Type: text/html, Size: 1048 bytes --]

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Gilles Chanteperdrix]

On 11/07/2011 11:44 PM, makarand pradhan wrote:
> Greetings All,
> 
> 
> 
> We note the QorlQ processors, and the Freescale e500 PowerPC architecture
> is not on the list of Supported Architectures at
> http://www.xenomai.org/index.php/Embedded_Device_Support.
> On the other hand, that document states that the QorIQ P2020
> is supported under "Supported Evaluation Boards". 
> Can anyone pl comment if the P1020 is supported or is going to be supported?
> Thanks and Rgds,

What is this? Some attempt to put pressure on us? It does not work that way.

-- 
                                                                Gilles.

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Luis Rossi]

[-- Attachment #1: Type: text/plain, Size: 1327 bytes --]

I belive it is no a preassure. Just a confusion. As the QorlQ board is on
the list of the suported Evaluation Boards, he wants to make sure if
processor architecture as whole is suported.

Cya

On Mon, Nov 7, 2011 at 11:45 PM, Gilles Chanteperdrix <
gilles.chanteperdrix@xenomai.org> wrote:

> On 11/07/2011 11:44 PM, makarand pradhan wrote:
> > Greetings All,
> >
> >
> >
> > We note the QorlQ processors, and the Freescale e500 PowerPC architecture
> > is not on the list of Supported Architectures at
> > http://www.xenomai.org/index.php/Embedded_Device_Support.
> > On the other hand, that document states that the QorIQ P2020
> > is supported under "Supported Evaluation Boards".
> > Can anyone pl comment if the P1020 is supported or is going to be
> supported?
> > Thanks and Rgds,
>
> What is this? Some attempt to put pressure on us? It does not work that
> way.
>
> --
>                                                                Gilles.
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>



-- 
Luís Filipe Rossi
Electrical Engineer
Biomechatronics Lab. / Grupo de Sensores Integráveis e Sistemas
Escola Politécnica
Universidade de São Paulo
Cel. +55 (11) 7662-9234

[-- Attachment #2: Type: text/html, Size: 2612 bytes --]

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Michael Pustylnik]

Hi Gilles,

It is not a pressure and it is sad it looked that way to you.
We don't have any intentions but figuring out whether or not the P1020 is supported. We have been using Xenomai for a few years already and we are looking at P1020 as a potential platform for our new project, so knowing if we can use Xenomai with it is very important.

 Michael.

Michael Pustylnik, P.Eng.
Senior Software Engineer
RuggedCom Inc.
www.ruggedcom.com
300 Applewood Crescent
Concord, Ontario, L4K 5C7
Tel:  (905)482-4523
Fax: (905)856-1995

 


-----Original Message-----
From: xenomai-help-bounces@domain.hid [mailto:xenomai-help-bounces@domain.hid] On Behalf Of Gilles Chanteperdrix
Sent: Monday, November 07, 2011 9:46 PM
To: makarand pradhan
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

On 11/07/2011 11:44 PM, makarand pradhan wrote:
> Greetings All,
> 
> 
> 
> We note the QorlQ processors, and the Freescale e500 PowerPC architecture
> is not on the list of Supported Architectures at
> http://www.xenomai.org/index.php/Embedded_Device_Support.
> On the other hand, that document states that the QorIQ P2020
> is supported under "Supported Evaluation Boards". 
> Can anyone pl comment if the P1020 is supported or is going to be supported?
> Thanks and Rgds,

What is this? Some attempt to put pressure on us? It does not work that way.

-- 
                                                                Gilles.

_______________________________________________
Xenomai-help mailing list
Xenomai-help@domain.hid
https://mail.gna.org/listinfo/xenomai-help

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.454 / Virus Database: 271.1.1/3990 - Release Date: 11/06/11 19:33:00

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[makarand pradhan]

[-- Attachment #1: Type: text/plain, Size: 2425 bytes --]

Dear Gilles,

As Michael mentioned, no pressure intended. Just wanted to communicate, why we are not sure about P1020. Sorry, if I sounded rude.

We would like to know if the P1020 is supported before considering it.

Warm Rgds,
Makarand.


________________________________
From: Michael Pustylnik <MichaelPustylnik@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>; makarand pradhan <makarand_u_pradhan@domain.hid>
Cc: "xenomai@xenomai.org" <xenomai@xenomai.org>
Sent: Tuesday, November 8, 2011 9:22 AM
Subject: RE: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

Hi Gilles,

It is not a pressure and it is sad it looked that way to you.
We don't have any intentions but figuring out whether or not the P1020 is supported. We have been using Xenomai for a few years already and we are looking at P1020 as a potential platform for our new project, so knowing if we can use Xenomai with it is very important.

Michael.

Michael Pustylnik, P.Eng.
Senior Software Engineer
RuggedCom Inc.
www.ruggedcom.com
300 Applewood Crescent
Concord, Ontario, L4K 5C7
Tel:  (905)482-4523
Fax: (905)856-1995




-----Original Message-----
From: xenomai-help-bounces@domain.hid [mailto:xenomai-help-bounces@domain.hid] On Behalf Of Gilles Chanteperdrix
Sent: Monday, November 07, 2011 9:46 PM
To: makarand pradhan
Cc: xenomai@xenomai.org: Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

On 11/07/2011 11:44 PM, makarand pradhan wrote:
> Greetings All,
> 
> 
> 
> We note the QorlQ processors, and the Freescale e500 PowerPC architecture
> is not on the list of Supported Architectures at
> http://www.xenomai.org/index.php/Embedded_Device_Support.
> On the other hand, that document states that the QorIQ P2020
> is supported under "Supported Evaluation Boards". 
> Can anyone pl comment if the P1020 is supported or is going to be supported?
> Thanks and Rgds,

What is this? Some attempt to put pressure on us? It does not work that way.

-- 
                                                                Gilles.

_______________________________________________
Xenomai-help mailing list
Xenomai-help@domain.hid.org/listinfo/xenomai-help

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.454 / Virus Database: 271.1.1/3990 - Release Date: 11/06/11 19:33:00

[-- Attachment #2: Type: text/html, Size: 4162 bytes --]

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Gilles Chanteperdrix]

On 11/08/2011 03:22 PM, Michael Pustylnik wrote:
> Hi Gilles,
> 
> It is not a pressure and it is sad it looked that way to you.
> We don't have any intentions but figuring out whether or not the P1020 is supported. We have been using Xenomai for a few years already and we are looking at P1020 as a potential platform for our new project, so knowing if we can use Xenomai with it is very important.

That accounts for the first post.
I was answering the second.

-- 
					    Gilles.

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[makarand pradhan]

[-- Attachment #1: Type: text/plain, Size: 1304 bytes --]

Dear Gilles,

I think I, now understand my mistake. I had sent the query to the Xenomai-core group earlier. Then thought that I had not sent the question to the right mailing list and resent it to the Xenomai-help mailing list. 

Please rest assured that I did not have any intentions of pressuring anyone. 

I'm new to the list and hence was a bit unsure. My sincere apologies.

Rgds,
Makarand.


________________________________
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: Michael Pustylnik <MichaelPustylnik@domain.hid>
Cc: makarand pradhan <makarand_u_pradhan@domain.hid>; "xenomai@xenomai.org" <xenomai@xenomai.org.org>
Sent: Tuesday, November 8, 2011 9:50 AM
Subject: Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

On 11/08/2011 03:22 PM, Michael Pustylnik wrote:
> Hi Gilles,
> 
> It is not a pressure and it is sad it looked that way to you.
> We don't have any intentions but figuring out whether or not the P1020 is supported. We have been using Xenomai for a few years already and we are looking at P1020 as a potential platform for our new project, so knowing if we can use Xenomai with it is very important.

That accounts for the first post.
I was answering the second.

-- 
                        Gilles.

[-- Attachment #2: Type: text/html, Size: 2270 bytes --]

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Philippe Gerum]

On 11/08/2011 04:08 PM, makarand pradhan wrote:
> Dear Gilles,
>
> I think I, now understand my mistake. I had sent the query to the
> Xenomai-core group earlier. Then thought that I had not sent the
> question to the right mailing list and resent it to the Xenomai-help
> mailing list.
>
> Please rest assured that I did not have any intentions of pressuring
> anyone.
>
> I'm new to the list and hence was a bit unsure. My sincere apologies.

Relax, this is all fine. It's my bad, I'm the one who should have 
answered, but I tend to give no priority to requests originating from 
companies hiding behind @yahoo.com, unless I do know who's behind 
actually. Gilles probably grumbles for the same reason.

So, the answer is maybe, maybe.

Maybe it already works, given that P2020 is supported and I don't see 
much changes in P1020 wrt what the interrupt pipeline needs to know. I 
won't know before I put my hands on such a beast.

Maybe it will be ported, I see no technical barrier, but I can't tell when.

>
> Rgds,
> Makarand.
>
> ------------------------------------------------------------------------
> *From:* Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
> *To:* Michael Pustylnik <MichaelPustylnik@domain.hid>
> *Cc:* makarand pradhan <makarand_u_pradhan@domain.hid>;
> "xenomai@xenomai.org" <xenomai@xenomai.org>
> *Sent:* Tuesday, November 8, 2011 9:50 AM
> *Subject:* Re: [Xenomai-help] Is there Xenomai support for the Freescale
> P1020 processor?
>
> On 11/08/2011 03:22 PM, Michael Pustylnik wrote:
>  > Hi Gilles,
>  >
>  > It is not a pressure and it is sad it looked that way to you.
>  > We don't have any intentions but figuring out whether or not the
> P1020 is supported. We have been using Xenomai for a few years already
> and we are looking at P1020 as a potential platform for our new project,
> so knowing if we can use Xenomai with it is very important.
>
> That accounts for the first post.
> I was answering the second.
>
> --
> Gilles.
>
>
>
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help


-- 
Philippe.

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Richard Cochran]

On Tue, Nov 08, 2011 at 05:22:07PM +0100, Philippe Gerum wrote:
> So, the answer is maybe, maybe.
> 
> Maybe it already works, given that P2020 is supported and I don't
> see much changes in P1020 wrt what the interrupt pipeline needs to
> know. I won't know before I put my hands on such a beast.

BTW, Philippe, about six weeks ago I tried to run the 3.0 powerpc
ipipe kernel on the P2020, but it won't compile.  The various irq_
functions have changed names and signatures, and so the ipipe
interrupt #ifdef code is out of date.

Richard

Re: [Xenomai-help] Is there Xenomai support for the Freescale P1020 processor?

[Philippe Gerum]

On 12/03/2011 10:52 AM, Richard Cochran wrote:
> On Tue, Nov 08, 2011 at 05:22:07PM +0100, Philippe Gerum wrote:
>> So, the answer is maybe, maybe.
>>
>> Maybe it already works, given that P2020 is supported and I don't
>> see much changes in P1020 wrt what the interrupt pipeline needs to
>> know. I won't know before I put my hands on such a beast.
>
> BTW, Philippe, about six weeks ago I tried to run the 3.0 powerpc
> ipipe kernel on the P2020, but it won't compile.  The various irq_
> functions have changed names and signatures, and so the ipipe
> interrupt #ifdef code is out of date.
>

Ok, thanks for the heads up. That should be better now,
http://download.gna.org/adeos/patches/v3.x/powerpc/

> Richard
>


-- 
Philippe.