From: Wen Congyang <wency@cn.fujitsu.com>
To: qemu-devel <qemu-devel@nongnu.org>,
Jan Kiszka <jan.kiszka@siemens.com>,
Dave Anderson <anderson@redhat.com>,
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Subject: [Qemu-devel] [RFC][PATCH 03/14 v4] target-i386: implement cpu_get_memory_mapping()
Date: Wed, 04 Jan 2012 14:06:04 +0800 [thread overview]
Message-ID: <4F03EC4C.2010601@cn.fujitsu.com> (raw)
In-Reply-To: <4F03E735.2050804@cn.fujitsu.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
Makefile.target | 2 +-
cpu-all.h | 7 ++
target-i386/arch-dump.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 262 insertions(+), 1 deletions(-)
create mode 100644 target-i386/arch-dump.c
diff --git a/Makefile.target b/Makefile.target
index 0d5286e..29562ad 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -73,7 +73,7 @@ libobj-$(CONFIG_TCG_INTERPRETER) += tci.o
libobj-y += fpu/softfloat.o
libobj-y += op_helper.o helper.o
ifeq ($(TARGET_BASE_ARCH), i386)
-libobj-y += cpuid.o
+libobj-y += cpuid.o arch-dump.o
endif
libobj-$(TARGET_SPARC64) += vis_helper.o
libobj-$(CONFIG_NEED_MMU) += mmu.o
diff --git a/cpu-all.h b/cpu-all.h
index 734833a..bc32c11 100644
--- a/cpu-all.h
+++ b/cpu-all.h
@@ -22,6 +22,7 @@
#include "qemu-common.h"
#include "qemu-tls.h"
#include "cpu-common.h"
+#include "memory_mapping.h"
/* some important defines:
*
@@ -575,4 +576,10 @@ void dump_exec_info(FILE *f, fprintf_function cpu_fprintf);
int cpu_memory_rw_debug(CPUState *env, target_ulong addr,
uint8_t *buf, int len, int is_write);
+#if defined(TARGET_I386)
+void cpu_get_memory_mapping(MemoryMappingList *list, CPUState *env);
+#else
+#define cpu_get_memory_mapping(list, env)
+#endif
+
#endif /* CPU_ALL_H */
diff --git a/target-i386/arch-dump.c b/target-i386/arch-dump.c
new file mode 100644
index 0000000..2e921c7
--- /dev/null
+++ b/target-i386/arch-dump.c
@@ -0,0 +1,254 @@
+/*
+ * i386 dump
+ *
+ * Copyright Fujitsu, Corp. 2011
+ *
+ * Authors:
+ * Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "cpu.h"
+#include "cpu-all.h"
+
+/* PAE Paging or IA-32e Paging */
+static void walk_pte(MemoryMappingList *list, target_phys_addr_t pte_start_addr,
+ int32_t a20_mask, target_ulong start_line_addr)
+{
+ target_phys_addr_t pte_addr, start_paddr;
+ uint64_t pte;
+ target_ulong start_vaddr;
+ int i;
+
+ for (i = 0; i < 512; i++) {
+ pte_addr = (pte_start_addr + i * 8) & a20_mask;
+ pte = ldq_phys(pte_addr);
+ if (!(pte & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ start_paddr = (pte & ~0xfff) & ~(0x1ULL << 63);
+ if (is_io_addr(start_paddr)) {
+ /* I/O region */
+ continue;
+ }
+
+ start_vaddr = start_line_addr | ((i & 0x1fff) << 12);
+ add_to_memory_mapping(list, start_paddr, start_vaddr, 1 << 12);
+ }
+}
+
+/* 32-bit Paging */
+static void walk_pte2(MemoryMappingList *list,
+ target_phys_addr_t pte_start_addr, int32_t a20_mask,
+ target_ulong start_line_addr)
+{
+ target_phys_addr_t pte_addr, start_paddr;
+ uint32_t pte;
+ target_ulong start_vaddr;
+ int i;
+
+ for (i = 0; i < 1024; i++) {
+ pte_addr = (pte_start_addr + i * 4) & a20_mask;
+ pte = ldl_phys(pte_addr);
+ if (!(pte & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ start_paddr = pte & ~0xfff;
+ if (is_io_addr(start_paddr)) {
+ /* I/O region */
+ continue;
+ }
+
+ start_vaddr = start_line_addr | ((i & 0x3ff) << 12);
+ add_to_memory_mapping(list, start_paddr, start_vaddr, 1 << 12);
+ }
+}
+
+/* PAE Paging or IA-32e Paging */
+static void walk_pde(MemoryMappingList *list, target_phys_addr_t pde_start_addr,
+ int32_t a20_mask, target_ulong start_line_addr)
+{
+ target_phys_addr_t pde_addr, pte_start_addr, start_paddr;
+ uint64_t pde;
+ target_ulong line_addr, start_vaddr;
+ int i;
+
+ for (i = 0; i < 512; i++) {
+ pde_addr = (pde_start_addr + i * 8) & a20_mask;
+ pde = ldq_phys(pde_addr);
+ if (!(pde & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ line_addr = start_line_addr | ((i & 0x1ff) << 21);
+ if (pde & PG_PSE_MASK) {
+ /* 2 MB page */
+ start_paddr = (pde & ~0x1fffff) & ~(0x1ULL << 63);
+ if (is_io_addr(start_paddr)) {
+ /* I/O region */
+ continue;
+ }
+ start_vaddr = line_addr;
+ add_to_memory_mapping(list, start_paddr, start_vaddr, 1 << 21);
+ continue;
+ }
+
+ pte_start_addr = (pde & ~0xfff) & a20_mask;
+ walk_pte(list, pte_start_addr, a20_mask, line_addr);
+ }
+}
+
+/* 32-bit Paging */
+static void walk_pde2(MemoryMappingList *list,
+ target_phys_addr_t pde_start_addr, int32_t a20_mask,
+ bool pse)
+{
+ target_phys_addr_t pde_addr, pte_start_addr, start_paddr;
+ uint32_t pde;
+ target_ulong line_addr, start_vaddr;
+ int i;
+
+ for (i = 0; i < 1024; i++) {
+ pde_addr = (pde_start_addr + i * 4) & a20_mask;
+ pde = ldl_phys(pde_addr);
+ if (!(pde & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ line_addr = (((unsigned int)i & 0x3ff) << 22);
+ if ((pde & PG_PSE_MASK) && pse) {
+ /* 4 MB page */
+ start_paddr = (pde & ~0x3fffff) | ((pde & 0x1fe000) << 19);
+ if (is_io_addr(start_paddr)) {
+ /* I/O region */
+ continue;
+ }
+ start_vaddr = line_addr;
+ add_to_memory_mapping(list, start_paddr, start_vaddr, 1 << 22);
+ continue;
+ }
+
+ pte_start_addr = (pde & ~0xfff) & a20_mask;
+ walk_pte2(list, pte_start_addr, a20_mask, line_addr);
+ }
+}
+
+/* PAE Paging */
+static void walk_pdpe2(MemoryMappingList *list,
+ target_phys_addr_t pdpe_start_addr, int32_t a20_mask)
+{
+ target_phys_addr_t pdpe_addr, pde_start_addr;
+ uint64_t pdpe;
+ target_ulong line_addr;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ pdpe_addr = (pdpe_start_addr + i * 8) & a20_mask;
+ pdpe = ldq_phys(pdpe_addr);
+ if (!(pdpe & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ line_addr = (((unsigned int)i & 0x3) << 30);
+ pde_start_addr = (pdpe & ~0xfff) & a20_mask;
+ walk_pde(list, pde_start_addr, a20_mask, line_addr);
+ }
+}
+
+#ifdef TARGET_X86_64
+/* IA-32e Paging */
+static void walk_pdpe(MemoryMappingList *list,
+ target_phys_addr_t pdpe_start_addr, int32_t a20_mask,
+ target_ulong start_line_addr)
+{
+ target_phys_addr_t pdpe_addr, pde_start_addr, start_paddr;
+ uint64_t pdpe;
+ target_ulong line_addr, start_vaddr;
+ int i;
+
+ for (i = 0; i < 512; i++) {
+ pdpe_addr = (pdpe_start_addr + i * 8) & a20_mask;
+ pdpe = ldq_phys(pdpe_addr);
+ if (!(pdpe & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ line_addr = start_line_addr | ((i & 0x1ffULL) << 30);
+ if (pdpe & PG_PSE_MASK) {
+ /* 1 GB page */
+ start_paddr = (pdpe & ~0x3fffffff) & ~(0x1ULL << 63);
+ if (is_io_addr(start_paddr)) {
+ /* I/O region */
+ continue;
+ }
+ start_vaddr = line_addr;
+ add_to_memory_mapping(list, start_paddr, start_vaddr, 1 << 30);
+ continue;
+ }
+
+ pde_start_addr = (pdpe & ~0xfff) & a20_mask;
+ walk_pde(list, pde_start_addr, a20_mask, line_addr);
+ }
+}
+
+/* IA-32e Paging */
+static void walk_pml4e(MemoryMappingList *list,
+ target_phys_addr_t pml4e_start_addr, int32_t a20_mask)
+{
+ target_phys_addr_t pml4e_addr, pdpe_start_addr;
+ uint64_t pml4e;
+ target_ulong line_addr;
+ int i;
+
+ for (i = 0; i < 512; i++) {
+ pml4e_addr = (pml4e_start_addr + i * 8) & a20_mask;
+ pml4e = ldq_phys(pml4e_addr);
+ if (!(pml4e & PG_PRESENT_MASK)) {
+ /* not present */
+ continue;
+ }
+
+ line_addr = ((i & 0x1ffULL) << 39) | (0xffffULL << 48);
+ pdpe_start_addr = (pml4e & ~0xfff) & a20_mask;
+ walk_pdpe(list, pdpe_start_addr, a20_mask, line_addr);
+ }
+}
+#endif
+
+void cpu_get_memory_mapping(MemoryMappingList *list, CPUState *env)
+{
+ if (env->cr[4] & CR4_PAE_MASK) {
+#ifdef TARGET_X86_64
+ if (env->hflags & HF_LMA_MASK) {
+ target_phys_addr_t pml4e_addr;
+
+ pml4e_addr = (env->cr[3] & ~0xfff) & env->a20_mask;
+ walk_pml4e(list, pml4e_addr, env->a20_mask);
+ } else
+#endif
+ {
+ target_phys_addr_t pdpe_addr;
+
+ pdpe_addr = (env->cr[3] & ~0x1f) & env->a20_mask;
+ walk_pdpe2(list, pdpe_addr, env->a20_mask);
+ }
+ } else {
+ target_phys_addr_t pde_addr;
+ bool pse;
+
+ pde_addr = (env->cr[3] & ~0xfff) & env->a20_mask;
+ pse = !!(env->cr[4] & CR4_PSE_MASK);
+ walk_pde2(list, pde_addr, env->a20_mask, pse);
+ }
+}
--
1.7.1
next prev parent reply other threads:[~2012-01-04 6:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-04 5:44 [Qemu-devel] [RFC][PATCT 0/14 v4] dump memory when host pci device is used by guest Wen Congyang
2012-01-04 6:04 ` [Qemu-devel] [RFC][PATCH 01/14 v4] Add API to create memory mapping list Wen Congyang
2012-01-04 6:05 ` [Qemu-devel] [RFC][PATCH 02/14 v4] Add API to check whether a physical address is I/O address Wen Congyang
2012-01-04 6:06 ` Wen Congyang [this message]
2012-01-04 6:07 ` [Qemu-devel] [RFC][PATCH 04/14 v4] Add API to get memory mapping Wen Congyang
2012-01-04 6:08 ` [Qemu-devel] [RFC][PATCH 05/14 v4] target-i386: Add API to write elf notes to core file Wen Congyang
2012-01-04 6:09 ` [Qemu-devel] [RFC][PATCH 06/14 v4] target-i386: Add API to add extra memory mapping Wen Congyang
2012-01-04 6:10 ` [Qemu-devel] [RFC][PATCH 07/14 v4] target-i386: add API to get dump info Wen Congyang
2012-01-04 6:11 ` [Qemu-devel] [RFC][PATCH 08/14 v4] introduce a new monitor command 'dump' to dump guest's memory Wen Congyang
2012-01-10 13:30 ` Luiz Capitulino
2012-01-11 0:59 ` Wen Congyang
2012-01-12 13:49 ` Luiz Capitulino
2012-01-13 8:35 ` Wen Congyang
2012-01-04 6:12 ` [Qemu-devel] [RFC][PATCH 09/14 v4] run dump at the background Wen Congyang
2012-01-04 6:13 ` [Qemu-devel] [RFC][PATCH 10/14 v4] support detached dump Wen Congyang
2012-01-04 6:14 ` [Qemu-devel] [RFC][PATCH 11/14 v4] support to cancel the current dumping Wen Congyang
2012-01-04 6:15 ` [Qemu-devel] [RFC][PATCH 12/14 v4] support to set dumping speed Wen Congyang
2012-01-04 6:16 ` [Qemu-devel] [RFC][PATCH 13/14 v4] support to query dumping status Wen Congyang
2012-01-04 6:17 ` [Qemu-devel] [RFC][PATCH 14/14 v4] auto cancel dumping after vm state is changed to run Wen Congyang
2012-01-10 7:44 ` [Qemu-devel] [RFC][PATCT 0/14 v4] dump memory when host pci device is used by guest Wen Congyang
2012-01-10 9:41 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F03EC4C.2010601@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=anderson@redhat.com \
--cc=d.hatayama@jp.fujitsu.com \
--cc=jan.kiszka@siemens.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.