From: Wen Congyang <wency@cn.fujitsu.com>
To: qemu-devel <qemu-devel@nongnu.org>,
Jan Kiszka <jan.kiszka@siemens.com>,
Dave Anderson <anderson@redhat.com>,
HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Subject: [Qemu-devel] [RFC][PATCH 09/14 v4] run dump at the background
Date: Wed, 04 Jan 2012 14:12:06 +0800 [thread overview]
Message-ID: <4F03EDB6.3030907@cn.fujitsu.com> (raw)
In-Reply-To: <4F03E735.2050804@cn.fujitsu.com>
The new monitor command dump may take long time to finish. So we need run it
at the background.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
dump.c | 158 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 139 insertions(+), 19 deletions(-)
diff --git a/dump.c b/dump.c
index ab29a4c..09ed96a 100644
--- a/dump.c
+++ b/dump.c
@@ -75,12 +75,20 @@ typedef struct DumpState {
Monitor *mon;
int fd;
target_phys_addr_t memory_offset;
+ int64_t bandwidth;
+ RAMBlock *block;
+ ram_addr_t start;
+ target_phys_addr_t offset;
+ QEMUTimer *timer;
} DumpState;
+#define DEFAULT_THROTTLE (32 << 20) /* Default dump speed throttling */
+
static DumpState *dump_get_current(void)
{
static DumpState current_dump = {
.state = DUMP_STATE_SETUP,
+ .bandwidth = DEFAULT_THROTTLE,
};
return ¤t_dump;
@@ -91,11 +99,21 @@ static int dump_cleanup(DumpState *s)
int ret = 0;
free_memory_mapping_list(&s->list);
+
if (s->fd != -1) {
close(s->fd);
s->fd = -1;
}
+ if (s->timer) {
+ qemu_del_timer(s->timer);
+ qemu_free_timer(s->timer);
+ }
+
+ if (s->mon) {
+ monitor_resume(s->mon);
+ }
+
return ret;
}
@@ -330,25 +348,40 @@ static int write_data(DumpState *s, void *buf, int length,
}
/* write the memroy to vmcore. 1 page per I/O. */
-static int write_memory(DumpState *s, RAMBlock *block,
- target_phys_addr_t *offset)
+static int write_memory(DumpState *s, RAMBlock *block, ram_addr_t start,
+ target_phys_addr_t *offset, int64_t *size,
+ int64_t deadline)
{
int i, ret;
+ int64_t writen_size = 0;
+ int64_t time;
- for (i = 0; i < block->length / TARGET_PAGE_SIZE; i++) {
- ret = write_data(s, block->host + i * TARGET_PAGE_SIZE,
+ for (i = 0; i < *size / TARGET_PAGE_SIZE; i++) {
+ ret = write_data(s, block->host + start + i * TARGET_PAGE_SIZE,
TARGET_PAGE_SIZE, offset);
if (ret < 0) {
return -1;
}
+ writen_size += TARGET_PAGE_SIZE;
+ time = qemu_get_clock_ms(rt_clock);
+ if (time >= deadline) {
+ /* time out */
+ *size = writen_size;
+ return 1;
+ }
}
- if ((block->length % TARGET_PAGE_SIZE) != 0) {
- ret = write_data(s, block->host + i * TARGET_PAGE_SIZE,
- block->length % TARGET_PAGE_SIZE, offset);
+ if ((*size % TARGET_PAGE_SIZE) != 0) {
+ ret = write_data(s, block->host + start + i * TARGET_PAGE_SIZE,
+ *size % TARGET_PAGE_SIZE, offset);
if (ret < 0) {
return -1;
}
+ time = qemu_get_clock_ms(rt_clock);
+ if (time >= deadline) {
+ /* time out */
+ return 1;
+ }
}
return 0;
@@ -383,6 +416,9 @@ static DumpState *dump_init(Monitor *mon, int fd)
s->error = NULL;
s->mon = mon;
s->fd = fd;
+ s->block = QLIST_FIRST(&ram_list.blocks);
+ s->start = 0;
+ s->timer = NULL;
/*
* get dump info: endian, class and architecture.
@@ -425,6 +461,11 @@ static DumpState *dump_init(Monitor *mon, int fd)
s->phdr_num += s->list.num;
}
+ if (monitor_suspend(mon) != 0) {
+ monitor_printf(mon, "terminal does not allow synchronous "
+ "dump, continuing detached\n");
+ }
+
return s;
}
@@ -482,6 +523,7 @@ static int dump_begin(DumpState *s)
}
s->memory_offset = offset;
+ s->offset = offset;
return 0;
}
@@ -509,38 +551,116 @@ static int dump_completed(DumpState *s)
return 0;
}
-/* write all memory to vmcore */
-static int dump_iterate(DumpState *s)
+/*
+ * write memory to vmcore.
+ *
+ * this function has three return values:
+ * -1 : there was one error
+ * 0 : We haven't finished, caller have to go again
+ * 1 : We have finished, we can go to complete phase
+ */
+static int dump_iterate(DumpState *s, int64_t deadline)
{
- RAMBlock *block;
- target_phys_addr_t offset = s->memory_offset;
+ RAMBlock *block = s->block;
+ target_phys_addr_t offset = s->offset;
+ int64_t size, remain, writen_size;
+ int64_t total = s->bandwidth / 10;
int ret;
- /* write all memory to vmcore */
- QLIST_FOREACH(block, &ram_list.blocks, next) {
- ret = write_memory(s, block, &offset);
+ if ((block->length - s->start) >= total) {
+ size = total;
+ } else {
+ size = block->length - s->start;
+ }
+
+ ret = write_memory(s, block, s->start, &offset, &size, deadline);
+ if (ret < 0) {
+ return -1;
+ }
+
+ if (size == total || ret == 1) {
+ if ((size + s->start) == block->length) {
+ s->block = QLIST_NEXT(block, next);
+ s->start = 0;
+ } else {
+ s->start += size;
+ }
+ goto end;
+ }
+
+ while (size < total) {
+ block = QLIST_NEXT(block, next);
+ if (!block) {
+ /* we have finished */
+ return 1;
+ }
+
+ remain = total - size;
+ if (remain >= block->length) {
+ writen_size = block->length;
+ } else {
+ writen_size = remain;
+ }
+ ret = write_memory(s, block, 0, &offset, &writen_size, deadline);
if (ret < 0) {
return -1;
+ } else if (ret == 1) {
+ break;
}
+ size += writen_size;
+ }
+ if (writen_size == block->length) {
+ s->block = QLIST_NEXT(block, next);
+ s->start = 0;
+ } else {
+ s->block = block;
+ s->start = writen_size;
+ }
+
+end:
+ s->offset = offset;
+ if (!s->block) {
+ /* we have finished */
+ return 1;
}
- return dump_completed(s);
+ return 0;
}
-static int create_vmcore(DumpState *s)
+static void dump_rate_tick(void *opaque)
{
+ DumpState *s = opaque;
+ int64_t begin, end;
int ret;
- ret = dump_begin(s);
+ begin = qemu_get_clock_ms(rt_clock);
+ ret = dump_iterate(s, begin + 100);
if (ret < 0) {
- return -1;
+ return;
+ } else if (ret == 1) {
+ dump_completed(s);
+ return;
+ }
+ end = qemu_get_clock_ms(rt_clock);
+ if (end - begin >= 100) {
+ qemu_mod_timer(s->timer, end + 10);
+ } else {
+ qemu_mod_timer(s->timer, begin + 100);
}
+}
- ret = dump_iterate(s);
+static int create_vmcore(DumpState *s)
+{
+ int ret;
+
+ ret = dump_begin(s);
if (ret < 0) {
return -1;
}
+ s->timer = qemu_new_timer_ms(rt_clock, dump_rate_tick, s);
+ qemu_mod_timer(s->timer, qemu_get_clock_ms(rt_clock) + 100);
+
return 0;
}
--
1.7.1
next prev parent reply other threads:[~2012-01-04 6:09 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-04 5:44 [Qemu-devel] [RFC][PATCT 0/14 v4] dump memory when host pci device is used by guest Wen Congyang
2012-01-04 6:04 ` [Qemu-devel] [RFC][PATCH 01/14 v4] Add API to create memory mapping list Wen Congyang
2012-01-04 6:05 ` [Qemu-devel] [RFC][PATCH 02/14 v4] Add API to check whether a physical address is I/O address Wen Congyang
2012-01-04 6:06 ` [Qemu-devel] [RFC][PATCH 03/14 v4] target-i386: implement cpu_get_memory_mapping() Wen Congyang
2012-01-04 6:07 ` [Qemu-devel] [RFC][PATCH 04/14 v4] Add API to get memory mapping Wen Congyang
2012-01-04 6:08 ` [Qemu-devel] [RFC][PATCH 05/14 v4] target-i386: Add API to write elf notes to core file Wen Congyang
2012-01-04 6:09 ` [Qemu-devel] [RFC][PATCH 06/14 v4] target-i386: Add API to add extra memory mapping Wen Congyang
2012-01-04 6:10 ` [Qemu-devel] [RFC][PATCH 07/14 v4] target-i386: add API to get dump info Wen Congyang
2012-01-04 6:11 ` [Qemu-devel] [RFC][PATCH 08/14 v4] introduce a new monitor command 'dump' to dump guest's memory Wen Congyang
2012-01-10 13:30 ` Luiz Capitulino
2012-01-11 0:59 ` Wen Congyang
2012-01-12 13:49 ` Luiz Capitulino
2012-01-13 8:35 ` Wen Congyang
2012-01-04 6:12 ` Wen Congyang [this message]
2012-01-04 6:13 ` [Qemu-devel] [RFC][PATCH 10/14 v4] support detached dump Wen Congyang
2012-01-04 6:14 ` [Qemu-devel] [RFC][PATCH 11/14 v4] support to cancel the current dumping Wen Congyang
2012-01-04 6:15 ` [Qemu-devel] [RFC][PATCH 12/14 v4] support to set dumping speed Wen Congyang
2012-01-04 6:16 ` [Qemu-devel] [RFC][PATCH 13/14 v4] support to query dumping status Wen Congyang
2012-01-04 6:17 ` [Qemu-devel] [RFC][PATCH 14/14 v4] auto cancel dumping after vm state is changed to run Wen Congyang
2012-01-10 7:44 ` [Qemu-devel] [RFC][PATCT 0/14 v4] dump memory when host pci device is used by guest Wen Congyang
2012-01-10 9:41 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F03EDB6.3030907@cn.fujitsu.com \
--to=wency@cn.fujitsu.com \
--cc=anderson@redhat.com \
--cc=d.hatayama@jp.fujitsu.com \
--cc=jan.kiszka@siemens.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.