* builds failing
@ 2012-01-09 13:52 Jim Abernathy
0 siblings, 0 replies; 10+ messages in thread
From: Jim Abernathy @ 2012-01-09 13:52 UTC (permalink / raw)
To: Yocto Project
Starting Friday, I noticed builds(n450) failing due to files not being
found. This morning it's still failing on 4 kernel.org modules:
i.e.
http://kernel.org/pub/linux/utils/kernel/module-init-tools/module-init-tools-3.16.tar.bz2
^ permalink raw reply [flat|nested] 10+ messages in thread
* Builds Failing
@ 2011-06-07 21:21 Russell Morris
2011-06-08 7:33 ` Khem Raj
2011-06-08 18:28 ` Tom Rini
0 siblings, 2 replies; 10+ messages in thread
From: Russell Morris @ 2011-06-07 21:21 UTC (permalink / raw)
To: openembedded-devel
[-- Attachment #1: Type: text/plain, Size: 282 bytes --]
Hi,
I am trying to build OE with the latest source (i.e. from MASTER) - but images that used to work are now failing (x11-gpe-image, console-image). The failure seems to be in bash, as you can see in the attached log files.
Is this a known issue?
Thanks!
... Russell
[-- Attachment #2: x11-gpe-image.log --]
[-- Type: application/octet-stream, Size: 6416 bytes --]
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
Loading cache...done.
Loaded 7049 entries from dependency cache.
Parsing recipes...NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support xcursor-watchonly-theme because xcursor-transparent-theme is good enough
NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support hotplug2 because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support fso-apm because regular apmd is good enough
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support bash-noemu because doesn't work on the target
NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support ipkg because ipkg has been superseded by opkg
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
done.
Parsing of 7182 .bb files complete (6411 cached, 771 parsed). 7838 targets, 323 skipped, 0 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.12.0"
METADATA_BRANCH = "master"
METADATA_REVISION = "00ae0e2"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "am3517-evm"
DISTRO = "angstrom"
DISTRO_VERSION = "v2011.06"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for runtime xserver-kdrive (xserver-kdrive, xserver-kdrive-1300)
NOTE: consider defining a PREFERRED_PROVIDER entry to match xserver-kdrive
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
NOTE: Running task 1863 of 6177 (ID: 4055, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_setscene)
NOTE: package libvpx-0.9.5-r7.0: task do_setscene: Started
NOTE: package libvpx-0.9.5-r7.0: task do_setscene: Succeeded
NOTE: Running task 1864 of 6177 (ID: 4054, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_fetch)
NOTE: package libvpx-0.9.5-r7.0: task do_fetch: Started
NOTE: package libvpx-0.9.5-r7.0: task do_fetch: Succeeded
NOTE: Running task 1865 of 6177 (ID: 4047, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_unpack)
NOTE: package libvpx-0.9.5-r7.0: task do_unpack: Started
NOTE: package libvpx-0.9.5-r7.0: task do_unpack: Succeeded
NOTE: Running task 2123 of 6177 (ID: 4048, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_patch)
NOTE: package libvpx-0.9.5-r7.0: task do_patch: Started
NOTE: package libvpx-0.9.5-r7.0: task do_patch: Succeeded
NOTE: Running task 2124 of 6177 (ID: 4056, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_configure)
NOTE: package libvpx-0.9.5-r7.0: task do_configure: Started
NOTE: package libvpx-0.9.5-r7.0: task do_configure: Succeeded
NOTE: Running task 2295 of 6177 (ID: 4057, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_qa_configure)
NOTE: package libvpx-0.9.5-r7.0: task do_qa_configure: Started
NOTE: package libvpx-0.9.5-r7.0: task do_qa_configure: Succeeded
NOTE: Running task 2296 of 6177 (ID: 4058, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_compile)
NOTE: package libvpx-0.9.5-r7.0: task do_compile: Started
NOTE: package libvpx-0.9.5-r7.0: task do_compile: Succeeded
NOTE: Running task 2297 of 6177 (ID: 4049, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_install)
NOTE: package libvpx-0.9.5-r7.0: task do_install: Started
NOTE: package libvpx-0.9.5-r7.0: task do_install: Succeeded
NOTE: Running task 2336 of 6177 (ID: 4050, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_populate_sysroot)
NOTE: package libvpx-0.9.5-r7.0: task do_populate_sysroot: Started
NOTE: package libvpx-0.9.5-r7.0: task do_populate_sysroot: Succeeded
NOTE: Running task 3459 of 6177 (ID: 4059, /mnt/OpenEmbedded/openembedded/recipes/webm/libvpx_0.9.5.bb, do_package)
NOTE: package libvpx-0.9.5-r7.0: task do_package: Started
NOTE: package libvpx-0.9.5-r7.0: task do_package: Succeeded
NOTE: Running task 3637 of 6177 (ID: 3040, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)
NOTE: package bash-3.2-r12: task do_patch: Started
ERROR: Execution of 'quilt --quiltrc=/mnt/OpenEmbedded/build/output/angstrom-2010.x/sysroots/i686-linux/usr/bin/quiltrc push' failed with exit code 1:
Applying patch bash32-001
Ignoring potentially dangerous file name ../bash-3.2/parse.y
patching file parse.y
Ignoring potentially dangerous file name ../bash-3.2/patchlevel.h
can't find file to patch at input line 35
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** ../bash-3.2/patchlevel.h Thu Apr 13 08:31:04 2006
|--- patchlevel.h Mon Oct 16 14:22:54 2006
--------------------------
No file to patch. Skipping patch.
1 out of 1 hunk ignored
Patch bash32-001 does not apply (enforce with -f)
NOTE: package bash-3.2-r12: task patch_do_patch: Failed
ERROR: Function 'patch_do_patch' failed
ERROR: Task 3040 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'
ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
[-- Attachment #3: console-image.log --]
[-- Type: application/octet-stream, Size: 3829 bytes --]
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
Loading cache...done.
Loaded 7049 entries from dependency cache.
Parsing recipes...NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support xcursor-watchonly-theme because xcursor-transparent-theme is good enough
NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support hotplug2 because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support fso-apm because regular apmd is good enough
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support linux-hotplug because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support bash-noemu because doesn't work on the target
NOTE: angstrom DOES NOT support hotplug-ng because hotplug functionality is provided by udev
NOTE: angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
NOTE: angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
NOTE: angstrom DOES NOT support ipkg because ipkg has been superseded by opkg
NOTE: angstrom DOES NOT support ffmpeg because libav is the preferred multimedia library
NOTE: angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
done.
Parsing of 7182 .bb files complete (6415 cached, 767 parsed). 7838 targets, 323 skipped, 0 masked, 0 errors.
Build Configuration:
BB_VERSION = "1.12.0"
METADATA_BRANCH = "master"
METADATA_REVISION = "00ae0e2"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "am3517-evm"
DISTRO = "angstrom"
DISTRO_VERSION = "v2011.06"
TARGET_FPU = "hard"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing RunQueue Tasks
NOTE: Running task 2551 of 4063 (ID: 1374, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)
NOTE: package bash-3.2-r12: task do_patch: Started
ERROR: Execution of 'quilt --quiltrc=/mnt/OpenEmbedded/build/output/angstrom-2010.x/sysroots/i686-linux/usr/bin/quiltrc push' failed with exit code 1:
Applying patch bash32-001
Ignoring potentially dangerous file name ../bash-3.2/parse.y
patching file parse.y
Ignoring potentially dangerous file name ../bash-3.2/patchlevel.h
can't find file to patch at input line 35
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|*** ../bash-3.2/patchlevel.h Thu Apr 13 08:31:04 2006
|--- patchlevel.h Mon Oct 16 14:22:54 2006
--------------------------
No file to patch. Skipping patch.
1 out of 1 hunk ignored
Patch bash32-001 does not apply (enforce with -f)
NOTE: package bash-3.2-r12: task patch_do_patch: Failed
ERROR: Function 'patch_do_patch' failed
ERROR: Task 1374 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'
ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-07 21:21 Builds Failing Russell Morris
@ 2011-06-08 7:33 ` Khem Raj
2011-06-08 12:42 ` Russell Morris
2011-06-08 18:28 ` Tom Rini
1 sibling, 1 reply; 10+ messages in thread
From: Khem Raj @ 2011-06-08 7:33 UTC (permalink / raw)
To: openembedded-devel@lists.openembedded.org
Cc: openembedded-devel@lists.openembedded.org
On Jun 7, 2011, at 2:21 PM, Russell Morris <openembedded@rkmorris.us> wrote:
> Hi,
>
> I am trying to build OE with the latest source (i.e. from MASTER) - but images that used to work are now failing (x11-gpe-image, console-image). The failure seems to be in bash, as you can see in the attached log files.
>
> Is this a known issue?
>
What's the version of patch you are using ? Or your host distro
> Thanks!
>
> ... Russell
>
> <x11-gpe-image.log>
> <console-image.log>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-08 7:33 ` Khem Raj
@ 2011-06-08 12:42 ` Russell Morris
0 siblings, 0 replies; 10+ messages in thread
From: Russell Morris @ 2011-06-08 12:42 UTC (permalink / raw)
To: openembedded-devel; +Cc: openembedded-devel@lists.openembedded.org
Hi,
My host distro is OpenSUSE (11.4). Here is the patch info,
NOTE: Running task 3637 of 6177 (ID: 3040, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)NOTE: package bash-3.2-r12: task do_patch: StartedERROR: Execution of 'quilt --quiltrc=/mnt/OpenEmbedded/build/output/angstrom-2010.x/sysroots/i686-linux/usr/bin/quiltrc push' failed with exit code 1:Applying patch bash32-001Ignoring potentially dangerous file name ../bash-3.2/parse.ypatching file parse.yIgnoring potentially dangerous file name ../bash-3.2/patchlevel.hcan't find file to patch at input line 35Perhaps you used the wrong -p or --strip option?The text leading up to this was:--------------------------|*** ../bash-3.2/patchlevel.h Thu Apr 13 08:31:04 2006|--- patchlevel.h Mon Oct 16 14:22:54 2006--------------------------No file to patch. Skipping patch.1 out of 1 hunk ignoredPatch bash32-001 does not apply (enforce with -f)
NOTE: package bash-3.2-r12: task patch_do_patch: FailedERROR: Function 'patch_do_patch' failedERROR: Task 3040 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
Thoughts?
Thanks,... Russell
On Wed, 06/08/2011 02:33 AM, Khem Raj <raj.khem@gmail.com> wrote:
> On Jun 7, 2011, at 2:21 PM, Russell Morris <openembedded@rkmorris.us> wrote:
>
> > Hi,
> >
> > I am trying to build OE with the latest source (i.e. from MASTER) - but images that used to work are now failing (x11-gpe-image, console-image). The failure seems to be in bash, as you can see in the attached log files.
> >
> > Is this a known issue?
> >
>
> What's the version of patch you are using ? Or your host distro
> > Thanks!
> >
> > ... Russell
> >
> > <x11-gpe-image.log>
> > <console-image.log>
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
From matteo.facchinetti@sirius-es.it Wed Jun 08 15:59:56 2011
Received: from ns1.gatteins.it ([193.58.239.94])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <matteo.facchinetti@sirius-es.it>) id 1QUJIa-0006XL-H5
for openembedded-devel@lists.openembedded.org;
Wed, 08 Jun 2011 15:59:56 +0200
X-Virus-Scanned: amavisd-new at gattei.com
Received: from localhost.localdomain (78-134-96-148.dynamic.eolo.it
[78.134.96.148])
by ns1.gatteins.it (Postfix) with ESMTPA id 439DADEF1F;
Wed, 8 Jun 2011 15:56:53 +0200 (MEST)
From: Matteo Facchinetti <matteo.facchinetti@sirius-es.it>
To: openembedded-devel@lists.openembedded.org
Date: Wed, 8 Jun 2011 15:56:29 +0200
Message-Id: <1307541389-2401-1-git-send-email-matteo.facchinetti@sirius-es.it>
X-Mailer: git-send-email 1.7.0.4
Cc: Matteo Facchinetti <engineering@sirius-es.it>
Subject: [oe] [PATCH v2] wxbase_2.8.9: fix includepath for SDL dependency
X-BeenThere: openembedded-devel@lists.openembedded.org
X-Mailman-Version: 2.1.11
Precedence: list
Reply-To: openembedded-devel@lists.openembedded.org
List-Id: Using the OpenEmbedded metadata to build Distributions
<openembedded-devel.lists.openembedded.org>
List-Unsubscribe: <http://lists.linuxtogo.org/cgi-bin/mailman/options/openembedded-devel>,
<mailto:openembedded-devel-request@lists.openembedded.org?subject
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-07 21:21 Builds Failing Russell Morris
2011-06-08 7:33 ` Khem Raj
@ 2011-06-08 18:28 ` Tom Rini
2011-06-13 23:27 ` Russell Morris
1 sibling, 1 reply; 10+ messages in thread
From: Tom Rini @ 2011-06-08 18:28 UTC (permalink / raw)
To: openembedded-devel
On 06/07/2011 02:21 PM, Russell Morris wrote:
> Hi,
>
> I am trying to build OE with the latest source (i.e. from MASTER) -
> but images that used to work are now failing (x11-gpe-image,
> console-image). The failure seems to be in bash, as you can see in
> the attached log files.
Ah ha! So, what's going on here is that upstream patches that we fetch
have the 'bad' behavior of encoding '..' into the path and newer
versions of 'patch' fail to apply these due to security concerns.
We can kludge around this by making the recipe use say 'git' as the
patch apply tool but someone should go yell at upstream. Or we need to
update to a newer version of bash where maybe upstream is publishing
better behaved patches.
--
Tom Rini
Mentor Graphics Corporation
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-08 18:28 ` Tom Rini
@ 2011-06-13 23:27 ` Russell Morris
2011-06-15 1:57 ` Tom Rini
0 siblings, 1 reply; 10+ messages in thread
From: Russell Morris @ 2011-06-13 23:27 UTC (permalink / raw)
To: openembedded-devel; +Cc: openembedded-devel
Hi,
Perhaps a dumb question, but ... do I need to do this? I can give it a try (though I'm not quite sure I understand what needs to be changed). Just trying to figure out how to get this working again.
Thanks!
... Russell
On Wed, 06/08/2011 01:28 PM, Tom Rini <tom_rini@mentor.com> wrote:
> On 06/07/2011 02:21 PM, Russell Morris wrote:
> > Hi,
> >
> > I am trying to build OE with the latest source (i.e. from MASTER) -
> > but images that used to work are now failing (x11-gpe-image,
> > console-image). The failure seems to be in bash, as you can see in
> > the attached log files.
>
> Ah ha! So, what's going on here is that upstream patches that we fetch
> have the 'bad' behavior of encoding '..' into the path and newer
> versions of 'patch' fail to apply these due to security concerns.
>
> We can kludge around this by making the recipe use say 'git' as the
> patch apply tool but someone should go yell at upstream. Or we need to
> update to a newer version of bash where maybe upstream is publishing
> better behaved patches.
>
> --
> Tom Rini
> Mentor Graphics Corporation
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
From pespin.shar@gmail.com Tue Jun 14 03:23:40 2011
Received: from mail-wy0-f175.google.com ([74.125.82.175])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <pespin.shar@gmail.com>) id 1QWIM0-0006Fb-GV
for openembedded-devel@lists.openembedded.org;
Tue, 14 Jun 2011 03:23:40 +0200
Received: by wye20 with SMTP id 20so4105275wye.6
for <openembedded-devel@lists.openembedded.org>;
Mon, 13 Jun 2011 18:20:15 -0700 (PDT)
DKIM-Signature: v
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-13 23:27 ` Russell Morris
@ 2011-06-15 1:57 ` Tom Rini
2011-06-19 20:26 ` Russell Morris
0 siblings, 1 reply; 10+ messages in thread
From: Tom Rini @ 2011-06-15 1:57 UTC (permalink / raw)
To: openembedded-devel
On 06/13/2011 04:27 PM, Russell Morris wrote:
> Hi,
> Perhaps a dumb question, but ... do I need to do this? I can give it a try (though I'm not quite sure I understand what needs to be changed). Just trying to figure out how to get this working again.
> Thanks!
Since you have a failing setup, yes, please :)
To make git be used as the patch tool, add
PATCHTOOL = "git" to the recipe, increase the PR and add a comment about
why we do this.
--
Tom Rini
Mentor Graphics Corporation
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-15 1:57 ` Tom Rini
@ 2011-06-19 20:26 ` Russell Morris
2011-07-03 21:41 ` Russell Morris
0 siblings, 1 reply; 10+ messages in thread
From: Russell Morris @ 2011-06-19 20:26 UTC (permalink / raw)
To: openembedded-devel; +Cc: openembedded-devel
Hi,
Sorry for the delay - out of town for a few days, just got back to this.
I did what you mentioned below, modified the recipe for bash_3.2 ... but now a new error ... :-). Here is what I get,
NOTE: Running task 3201 of 6177 (ID: 3047, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_setscene)NOTE: package bash-3.2-r13: task do_setscene: StartedNOTE: package bash-3.2-r13: task do_setscene: SucceededNOTE: Running task 3202 of 6177 (ID: 3046, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_fetch)NOTE: package bash-3.2-r13: task do_fetch: StartedNOTE: package bash-3.2-r13: task do_fetch: SucceededNOTE: Running task 3203 of 6177 (ID: 3039, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_unpack)NOTE: package bash-3.2-r13: task do_unpack: StartedNOTE: package bash-3.2-r13: task do_unpack: SucceededNOTE: Running task 3637 of 6177 (ID: 3040, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)NOTE: package bash-3.2-r13: task do_patch: StartedERROR: Execution of 'git --git-dir=. apply -p0 /mnt/OpenEmbedded/sources/bash32-001' failed with exit code 1:error: No changes
NOTE: package bash-3.2-r13: task patch_do_patch: FailedERROR: Function 'patch_do_patch' failedERROR: Task 3040 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
Thoughts?
Thanks,... Russell
On Tue, 06/14/2011 08:57 PM, Tom Rini <tom_rini@mentor.com> wrote:
> On 06/13/2011 04:27 PM, Russell Morris wrote:
> > Hi,
> > Perhaps a dumb question, but ... do I need to do this? I can give it a try (though I'm not quite sure I understand what needs to be changed). Just trying to figure out how to get this working again.
> > Thanks!
>
> Since you have a failing setup, yes, please :)
>
> To make git be used as the patch tool, add
> PATCHTOOL = "git" to the recipe, increase the PR and add a comment about
> why we do this.
>
> --
> Tom Rini
> Mentor Graphics Corporation
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
From paulepanter@users.sourceforge.net Mon Jun 20 13:23:29 2011
Received: from mail.gw90.de ([188.40.100.199])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <paulepanter@users.sourceforge.net>)
id 1QYcZl-0007q6-Kp for openembedded-devel@lists.openembedded.org;
Mon, 20 Jun 2011 13:23:29 +0200
Received: from f053036010.adsl.alicedsl.de ([78.53.36.10]
helo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-06-19 20:26 ` Russell Morris
@ 2011-07-03 21:41 ` Russell Morris
2011-07-04 13:59 ` Russell Morris
0 siblings, 1 reply; 10+ messages in thread
From: Russell Morris @ 2011-07-03 21:41 UTC (permalink / raw)
To: openembedded-devel
Has anyone had any luck with bash lately? I can't get it to build - so even console-image fails.
Thanks!
... Russell
On Sun, 06/19/2011 03:26 PM, Russell Morris <openembedded@rkmorris.us> wrote:
>
Hi,
>
Sorry for the delay - out of town for a few days, just got back to this.
>
I did what you mentioned below, modified the recipe for bash_3.2 ... but now a new error ... :-). Here is what I get,
>
NOTE: Running task 3201 of 6177 (ID: 3047, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_setscene)
NOTE: package bash-3.2-r13: task do_setscene: Started
NOTE: package bash-3.2-r13: task do_setscene: Succeeded
NOTE: Running task 3202 of 6177 (ID: 3046, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_fetch)
NOTE: package bash-3.2-r13: task do_fetch: Started
NOTE: package bash-3.2-r13: task do_fetch: Succeeded
NOTE: Running task 3203 of 6177 (ID: 3039, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_unpack)
NOTE: package bash-3.2-r13: task do_unpack: Started
NOTE: package bash-3.2-r13: task do_unpack: Succeeded
NOTE: Running task 3637 of 6177 (ID: 3040, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)
NOTE: package bash-3.2-r13: task do_patch: Started
ERROR: Execution of 'git --git-dir=. apply -p0 /mnt/OpenEmbedded/sources/bash32-001' failed with exit code 1:
error: No changes
>
NOTE: package bash-3.2-r13: task patch_do_patch: Failed
ERROR: Function 'patch_do_patch' failed
ERROR: Task 3040 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'
ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
>
Thoughts?
>
Thanks,
... Russell
>
> On Tue, 06/14/2011 08:57 PM, Tom Rini <tom_rini@mentor.com> wrote:
>
>
On 06/13/2011 04:27 PM, Russell Morris wrote:
> > Hi,
> > Perhaps a dumb question, but ... do I need to do this? I can give it a try (though I'm not quite sure I understand what needs to be changed). Just trying to figure out how to get this working again.
> > Thanks!
>
> Since you have a failing setup, yes, please :)
>
> To make git be used as the patch tool, add
> PATCHTOOL = "git" to the recipe, increase the PR and add a comment about
> why we do this.
>
> --
> Tom Rini
> Mentor Graphics Corporation
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
From ozgungunay@gmail.com Mon Jul 04 08:12:19 2011
Received: from mail-gy0-f175.google.com ([209.85.160.175])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <ozgungunay@gmail.com>) id 1QdcOJ-0007U5-6Z
for openembedded-devel@lists.openembedded.org;
Mon, 04 Jul 2011 08:12:19 +0200
Received: by gyd12 with SMTP id 12so1996337gyd.6
for <openembedded-devel@lists.openembedded.org>;
Sun, 03 Jul 2011 23:08:30 -0700 (PDT)
DKIM-Signature: v
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Builds Failing
2011-07-03 21:41 ` Russell Morris
@ 2011-07-04 13:59 ` Russell Morris
0 siblings, 0 replies; 10+ messages in thread
From: Russell Morris @ 2011-07-04 13:59 UTC (permalink / raw)
To: openembedded-devel, openembedded-core
FYI - I (locally) deleted the bash 3.2 recipe ...and the build works fine now! It seems that bash 3.0 is fine, but 3.2 has issues for some reason.
Hopefully this saves someone else the same grief.
... Russell
On Sun, 07/03/2011 04:41 PM, Russell Morris <openembedded@rkmorris.us> wrote:
>
Has anyone had any luck with bash lately? I can't get it to build - so even console-image fails.
>
>
>
> Thanks!
>
>
>
> ... Russell
>
>
>
>
>
> On Sun, 06/19/2011 03:26 PM, Russell Morris <openembedded@rkmorris.us> wrote:
>
>
> >
>
>
> Hi,
>
> >
> Sorry for the delay - out of town for a few days, just got back to this.
>
> >
> I did what you mentioned below, modified the recipe for bash_3.2 ... but now a new error ... :-). Here is what I get,
>
> >
>
> NOTE: Running task 3201 of 6177 (ID: 3047, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_setscene)
> NOTE: package bash-3.2-r13: task do_setscene: Started
> NOTE: package bash-3.2-r13: task do_setscene: Succeeded
> NOTE: Running task 3202 of 6177 (ID: 3046, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_fetch)
> NOTE: package bash-3.2-r13: task do_fetch: Started
> NOTE: package bash-3.2-r13: task do_fetch: Succeeded
> NOTE: Running task 3203 of 6177 (ID: 3039, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_unpack)
> NOTE: package bash-3.2-r13: task do_unpack: Started
> NOTE: package bash-3.2-r13: task do_unpack: Succeeded
> NOTE: Running task 3637 of 6177 (ID: 3040, /mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch)
> NOTE: package bash-3.2-r13: task do_patch: Started
> ERROR: Execution of 'git --git-dir=. apply -p0 /mnt/OpenEmbedded/sources/bash32-001' failed with exit code 1:
> error: No changes
>
> >
> NOTE: package bash-3.2-r13: task patch_do_patch: Failed
> ERROR: Function 'patch_do_patch' failed
> ERROR: Task 3040 (/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb, do_patch) failed with exit code '1'
> ERROR: '/mnt/OpenEmbedded/openembedded/recipes/bash/bash_3.2.bb' failed
>
> >
> Thoughts?
>
> >
> Thanks,
> ... Russell
>
> >
> > On Tue, 06/14/2011 08:57 PM, Tom Rini <tom_rini@mentor.com> wrote:
> >
> >
> On 06/13/2011 04:27 PM, Russell Morris wrote:
> > > Hi,
> > > Perhaps a dumb question, but ... do I need to do this? I can give it a try (though I'm not quite sure I understand what needs to be changed). Just trying to figure out how to get this working again.
> > > Thanks!
> >
> > Since you have a failing setup, yes, please :)
> >
> > To make git be used as the patch tool, add
> > PATCHTOOL = "git" to the recipe, increase the PR and add a comment about
> > why we do this.
> >
> > --
> > Tom Rini
> > Mentor Graphics Corporation
> >
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
> >
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
From a.sappia@biotechware.com Mon Jul 04 20:39:55 2011
Received: from slow3-v.mail.gandi.net ([217.70.178.89])
by linuxtogo.org with esmtp (Exim 4.72)
(envelope-from <a.sappia@biotechware.com>) id 1Qdo3n-0007uS-1n
for openembedded-devel@lists.openembedded.org;
Mon, 04 Jul 2011 20:39:55 +0200
X-WhiteListed: mail was accepted with no delay
X-WhiteListed: mail was accepted with no delay
Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net
[217.70.183.195])
by slow3-v.mail.gandi.net (Postfix) with ESMTP id 9A38B86219
for <openembedded-devel@lists.openembedded.org>;
Mon, 4 Jul 2011 20:20:38 +0200 (CEST)
X-Originating-IP: 217.70.178.137
Received: from mfilter8-d.gandi.net (mfilter8-d.gandi.net [217.70.178.137])
by relay3-d.mail.gandi.net (Postfix) with ESMTP id 5BEAFA806E
for <openembedded-devel@lists.openembedded.org>;
Mon, 4 Jul 2011 20:20:37 +0200 (CEST)
X-Virus-Scanned: Debian amavisd-new at mfilter8-d.gandi.net
Received: from relay3-d.mail.gandi.net ([217.70.183.195])
by mfilter8-d.gandi.net (mfilter8-d.gandi.net [10.0.15.180])
(amavisd-new, port 10024) with ESMTP id HBOqP+ppEQHl
for <openembedded-devel@lists.openembedded.org>;
Mon, 4 Jul 2011 20:20:32 +0200 (CEST)
X-Originating-IP: 87.241.57.98
Received: from [192.168.8.53] (fireone.i3p.it [87.241.57.98])
(Authenticated sender: a.sappia@biotechware.com)
by relay3-d.mail.gandi.net (Postfix) with ESMTPSA id 1EE72A8070
for <openembedded-devel@lists.openembedded.org>;
Mon, 4 Jul 2011 20:20:30 +0200 (CEST)
From: Alessandro Sappia <a.sappia@biotechware.com>
To: openembedded-devel@lists.openembedded.org
Organization: Biotechware srl
Date: Mon, 04 Jul 2011 20:20:29 +0200
Message-ID: <1309803629.20865.8.camel@BTW1>
Mime-Version: 1.0
X-Mailer: Evolution 2.32.2
Content-Type: text/plain; charset
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-01-09 13:52 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-09 13:52 builds failing Jim Abernathy
-- strict thread matches above, loose matches on Subject: below --
2011-06-07 21:21 Builds Failing Russell Morris
2011-06-08 7:33 ` Khem Raj
2011-06-08 12:42 ` Russell Morris
2011-06-08 18:28 ` Tom Rini
2011-06-13 23:27 ` Russell Morris
2011-06-15 1:57 ` Tom Rini
2011-06-19 20:26 ` Russell Morris
2011-07-03 21:41 ` Russell Morris
2011-07-04 13:59 ` Russell Morris
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.