From: "Arend van Spriel" <arend@broadcom.com>
To: "Linus Torvalds" <torvalds@linux-foundation.org>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"Larry Finger" <Larry.Finger@lwfinger.net>,
"Alwin Beukers" <alwin@broadcom.com>,
"Roland Vossen" <rvossen@broadcom.com>,
"John W. Linville" <linville@tuxdriver.com>,
"Network Development" <netdev@vger.kernel.org>,
"Franky (Zhenhui) Lin" <frankyl@broadcom.com>
Subject: Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes
Date: Mon, 16 Jan 2012 15:00:36 +0100 [thread overview]
Message-ID: <4F142D84.4060405@broadcom.com> (raw)
In-Reply-To: <CA+55aFxtaw+FF8wRf9td1rU0A_vhM8XwgSznzE-ph_4j=t5gWg@mail.gmail.com>
On 01/14/2012 04:50 AM, Linus Torvalds wrote:
> 2012/1/13 Arend van Spriel <arend@broadcom.com>:
>>
>> Upon suspend my laptop hangs (see trace below pulled from serial
>> console). I do not see the pr_debug in the suspend function (compiled
>> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
>> and brcmsmac. I attached the kernel configuration.
>
> Ok, I note that you do have MCE enabled.
>
> The MCE problems should be fixed in current -git, and so it might be
> worth re-testing with that.
>
> Linus
>
Hi Linus,
I build a kernel with MCE disabled and tested that. It still hung. I
decided run the kernel with nomodeset parameter to avoid framebuffer
issues. Now the suspend worked, but resume failed. Just heard a beep and
that was it. I will refresh the tree and build another kernel with MCE
enabled.
Also observed occasional long delay upon startup:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-07331-gb2a1efc (root@arend-vb-linux)
(gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Fri Jan 13
21:31:23 CET 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable)
[ 0.000000] BIOS-e820: 00000000cf65f000 - 00000000cf67f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf67f000 - 00000000cf76f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf76f000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Notice: NX (Execute Disable) protection cannot be
enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0xcf65f max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 base 12C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f2200] f2200
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0096000] 96000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 37c1a000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 37428000 - 377fd004
[ 0.000000] Move RAMDISK from 0000000037c1a000 - 0000000037fef003 to
37428000 - 377fd003
[ 0.000000] ACPI: RSDP 000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT cf67de18 00064 (v01 DELL E2 06222004
MSFT 00010013)
[ 0.000000] ACPI: FACP cf75fc18 000F4 (v04 DELL E2 06222004
MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
0xCF76BF40/0x00000000CF76ED40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT cf73e018 0A24E (v01 DELL E2 00001001
INTL 20080729)
[ 0.000000] ACPI: FACS cf76bf40 00040
[ 0.000000] ACPI: APIC cf67cf18 0008C (v02 DELL E2 06222004
MSFT 00010013)
[ 0.000000] ACPI: TCPA cf76dd18 00032 (v02 00000000
00000000)
[ 0.000000] ACPI: MCFG cf76dc98 0003C (v01 A M I GMCH945. 06222004
MSFT 00000097)
[ 0.000000] ACPI: HPET cf76dc18 00038 (v01 DELL E2 00000001
ASL 00000061)
[ 0.000000] ACPI: BOOT cf76db98 00028 (v01 DELL E2 06222004
AMI 00010013)
[ 0.000000] ACPI: SLIC cf766818 00176 (v03 DELL E2 06222004
MSFT 00010013)
[ 0.000000] ACPI: SSDT cf74d018 009F1 (v01 PmRef CpuPm 00003000
INTL 20080729)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2430MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cf65f
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cf65f
[ 0.000000] On node 0 totalpages: 849385
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3946 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4861 pages used for memmap
[ 0.000000] HighMem zone: 617316 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 -
000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:28000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s29952 r0 d23296
u524288
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 842748
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-07331-gb2a1efc
root=UUID=7051116f-03ec-4df3-a8ff-813fb03aec9f ro ignore_loglevel
console=tty0 console=ttyS0,115200 nomodeset no_console_suspend
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cf65f)
[ 0.000000] Memory: 3357116k/3398012k available (4841k kernel code,
40424k reserved, 2278k data, 556k init, 2488708k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc16f4000 - 0xc177f000 ( 556 kB)
[ 0.000000] .data : 0xc14ba50e - 0xc16f3fc0 (2278 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14ba50e (4841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 6815744 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2793.229 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5586.45 BogoMIPS (lpj=11172916)
[ 0.010817] pid_max: default: 32768 minimum: 301
[ 0.015520] Security Framework initialized
[ 0.019689] AppArmor: AppArmor initialized
[ 0.023878] Mount-cache hash table entries: 512
[ 0.028574] Initializing cgroup subsys cpuacct
[ 0.033081] Initializing cgroup subsys memory
[ 0.037503] Initializing cgroup subsys devices
[ 0.042011] Initializing cgroup subsys freezer
[ 0.046518] Initializing cgroup subsys net_cls
[ 0.051042] CPU: Physical Processor ID: 0
[ 0.055116] CPU: Processor Core ID: 0
[ 0.058827] using mwait in idle threads.
[ 0.064089] ACPI: Core revision 20110623
[ 0.073049] ftrace: allocating 20190 entries in 40 pages
[ 0.083048] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.088911] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.134409] CPU0: Intel(R) Core(TM) i7 CPU M 640 @ 2.80GHz
stepping 05
[ 0.246713] Performance Events: PEBS fmt1+, Westmere events, Intel
PMU driver.
[ 0.254187] CPUID marked event: 'bus cycles' unavailable
[ 0.259547] ... version: 3
[ 0.263743] ... bit width: 48
[ 0.267890] ... generic registers: 4
[ 0.271949] ... value mask: 0000ffffffffffff
[ 0.279011] ... max period: 000000007fffffff
[ 0.284369] ... fixed-purpose events: 3
[ 0.288428] ... event mask: 000000070000000f
[ 0.293915] CPU 1 irqstacks, hard=f4b4e000 soft=f4b58000
[ 0.299274] Booting Node 0, Processors #1
[ 0.303474] smpboot cpu 1: start_ip = 96000
[ 0.318218] Initializing CPU#1
[ 0.341383] CPU 2 irqstacks, hard=f4b62000 soft=f4b64000
[ 0.346745] #2
[ 0.348370] smpboot cpu 2: start_ip = 96000
[ 0.362989] Initializing CPU#2
[ 0.386195] CPU 3 irqstacks, hard=f4b6e000 soft=f4b70000
[ 0.391557] #3
[ 0.393180] smpboot cpu 3: start_ip = 96000
[ 0.407801] Initializing CPU#3
[ 0.430931] Brought up 4 CPUs
[ 0.433952] Total of 4 processors activated (22345.83 BogoMIPS).
[ 0.442574] devtmpfs: initialized
[ 0.446052] PM: Registering ACPI NVS region at cf67f000 (983040 bytes)
[ 0.453333] print_constraints: dummy:
[ 0.457165] RTC time: 13:52:08, date: 01/16/12
[ 0.461685] NET: Registered protocol family 16
[ 0.466229] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.473852] ACPI: bus type pci registered
[ 0.477960] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.487317] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.494149] PCI: Using MMCONFIG for extended config space
[ 0.499596] PCI: Using configuration type 1 for base access
[ 0.505220] dmi type 0xB1 record - unknown flag
[ 0.510288] bio: create slab <bio-0> at 0
[ 0.514393] ACPI: Added _OSI(Module Device)
[ 0.518628] ACPI: Added _OSI(Processor Device)
[ 0.523122] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.527876] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.534434] ACPI: EC: Look up EC in DSDT
[ 0.542573] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.555797] ACPI: SSDT cf7eaa18 004B6 (v01 PmRef Cpu0Ist 00003000
INTL 20080729)
[ 0.563813] ACPI: Dynamic OEM Table Load:
[ 0.568000] ACPI: SSDT (null) 004B6 (v01 PmRef Cpu0Ist 00003000
INTL 20080729)
[ 0.575855] ACPI: SSDT cf7e8018 00891 (v01 PmRef Cpu0Cst 00003001
INTL 20080729)
[ 0.583852] ACPI: Dynamic OEM Table Load:
[ 0.588039] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001
INTL 20080729)
[ 0.595979] ACPI: SSDT cf7e9a98 00303 (v01 PmRef ApIst 00003000
INTL 20080729)
[ 0.604029] ACPI: Dynamic OEM Table Load:
[ 0.608216] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000
INTL 20080729)
[ 0.616042] ACPI: SSDT cf7e7d98 00119 (v01 PmRef ApCst 00003000
INTL 20080729)
[ 0.624061] ACPI: Dynamic OEM Table Load:
[ 0.628245] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000
INTL 20080729)
[ 0.637407] ACPI: Interpreter enabled
[ 0.641126] ACPI: (supports S0 S3 S4 S5)
[ 0.645374] ACPI: Using IOAPIC for interrupt routing
[ 0.661754] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data =
0x930
[ 0.669313] ACPI: No dock devices found.
[ 0.673288] HEST: Table not found.
[ 0.676743] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.686201] \_SB_.PCI0:_OSC invalid UUID
[ 0.690175] _OSC request data:1 8 1f
[ 0.694136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.700798] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.707457] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.714115] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.721479] pci_root PNP0A08:00: host bridge window [mem
0xd0000000-0xfeafffff]
[ 0.728865] PCI host bridge to bus 0000:00
[ 0.733014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.739241] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.745467] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.752385] pci_bus 0000:00: root bus resource [mem
0xd0000000-0xfeafffff]
[ 0.759309] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.765305] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.771296] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.777484] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.783473] pci 0000:00:19.0: reg 10: [mem 0xe9600000-0xe961ffff]
[ 0.789624] pci 0000:00:19.0: reg 14: [mem 0xe9680000-0xe9680fff]
[ 0.795772] pci 0000:00:19.0: reg 18: [io 0x8040-0x805f]
[ 0.801302] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.807470] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.813460] pci 0000:00:1a.0: reg 10: [mem 0xe9670000-0xe96703ff]
[ 0.819703] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.825873] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.831857] pci 0000:00:1b.0: reg 10: [mem 0xe9660000-0xe9663fff 64bit]
[ 0.838609] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.844774] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.850834] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.857003] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.863065] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.869233] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.875295] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.881465] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.887526] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.893704] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.899692] pci 0000:00:1d.0: reg 10: [mem 0xe9650000-0xe96503ff]
[ 0.905934] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.912097] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.918144] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.924232] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.930223] pci 0000:00:1f.2: reg 10: [io 0x8090-0x8097]
[ 0.935678] pci 0000:00:1f.2: reg 14: [io 0x8080-0x8083]
[ 0.941133] pci 0000:00:1f.2: reg 18: [io 0x8070-0x8077]
[ 0.946589] pci 0000:00:1f.2: reg 1c: [io 0x8060-0x8063]
[ 0.952045] pci 0000:00:1f.2: reg 20: [io 0x8020-0x803f]
[ 0.957501] pci 0000:00:1f.2: reg 24: [mem 0xe9640000-0xe96407ff]
[ 0.963703] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.968997] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.974982] pci 0000:00:1f.3: reg 10: [mem 0xe9630000-0xe96300ff 64bit]
[ 0.981669] pci 0000:00:1f.3: reg 20: [io 0x8000-0x801f]
[ 0.987162] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.993153] pci 0000:00:1f.6: reg 10: [mem 0xe9620000-0xe9620fff 64bit]
[ 0.999935] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[ 1.005906] pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
[ 1.012054] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.019153] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff
64bit pref]
[ 1.026249] pci 0000:01:00.0: reg 24: [io 0x7000-0x707f]
[ 1.031701] pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe307ffff pref]
[ 1.038317] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 1.044290] pci 0000:01:00.1: reg 10: [mem 0xe3080000-0xe3083fff]
[ 1.050504] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.055777] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 1.061916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
[ 1.068802] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.074079] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 1.080220] pci 0000:00:1c.0: bridge window [mem 0xe8200000-0xe95fffff]
[ 1.087179] pci 0000:03:00.0: [14e4:4353] type 0 class 0x000280
[ 1.093213] pci 0000:03:00.0: reg 10: [mem 0xe6e00000-0xe6e03fff 64bit]
[ 1.100131] pci 0000:03:00.0: supports D1 D2
[ 1.104450] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.110764] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.116039] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 1.122181] pci 0000:00:1c.1: bridge window [mem 0xe6e00000-0xe81fffff]
[ 1.129141] pci 0000:04:00.0: [1180:e476] type 2 class 0x000607
[ 1.135172] pci 0000:04:00.0: reg 10: [mem 0xe5940000-0xe5940fff]
[ 1.141431] pci 0000:04:00.0: supports D1 D2
[ 1.145753] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.152508] pci 0000:04:00.1: [1180:e822] type 0 class 0x000805
[ 1.158542] pci 0000:04:00.1: reg 10: [mem 0xe5930000-0xe59300ff]
[ 1.164884] pci 0000:04:00.1: supports D1 D2
[ 1.169204] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.175960] pci 0000:04:00.4: [1180:e832] type 0 class 0x000c00
[ 1.181991] pci 0000:04:00.4: reg 10: [mem 0xe5900000-0xe59007ff]
[ 1.188331] pci 0000:04:00.4: supports D1 D2
[ 1.192652] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.207903] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 1.213185] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 1.219328] pci 0000:00:1c.2: bridge window [mem 0xe3100000-0xe59fffff]
[ 1.226255] pci_bus 0000:05: [bus 05-08] partially hidden behind
bridge 0000:04 [bus 04-05]
[ 1.234712] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
[ 1.239989] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 1.246132] pci 0000:00:1c.3: bridge window [mem 0xe5a00000-0xe6dfffff]
[ 1.253165] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive
decode)
[ 1.260268] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.268236] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 1.276203] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 1.284867] pci 0000:00:1e.0: bridge window [mem
0xd0000000-0xfeafffff] (subtractive decode)
[ 1.293558] pci_bus 0000:00: on NUMA node 0
[ 1.297792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.303885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 1.310325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.316805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.323240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.329677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.336114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.342600] \_SB_.PCI0:_OSC invalid UUID
[ 1.346574] _OSC request data:1 1f 1f
[ 1.350627] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.356358] \_SB_.PCI0:_OSC invalid UUID
[ 1.360332] _OSC request data:1 0 1d
[ 1.366005] pci0000:00: ACPI _OSC request failed (AE_ERROR),
returned control mask: 0x1d
[ 1.374233] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.383094] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 1.389084] PCI: root bus 3f: using default resources
[ 1.394200] PCI host bridge to bus 0000:3f
[ 1.398349] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 1.404575] pci_bus 0000:3f: root bus resource [mem
0x00000000-0xffffffff]
[ 1.411498] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[ 1.417477] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[ 1.423458] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[ 1.429436] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[ 1.435414] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[ 1.441392] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[ 1.447378] pci_bus 0000:3f: on NUMA node 0
[ 1.451617] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 1.457322] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 1.465896] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.472273] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 1.480406] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 1.488543] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[ 1.496341] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 1.504473] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 *3 4 5 6 7 10 12
14 15)
[ 1.512267] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 1.521326] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 1.529455] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *0, disabled.
[ 1.538538] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.546683] vgaarb: loaded
[ 1.549442] vgaarb: bridge control possible 0000:01:00.0
[ 1.554860] SCSI subsystem initialized
[ 1.558688] libata version 3.00 loaded.
[ 1.562602] usbcore: registered new interface driver usbfs
[ 1.568142] usbcore: registered new interface driver hub
[ 1.573515] usbcore: registered new device driver usb
[ 1.578698] wmi: Mapper loaded
[ 1.581805] PCI: Using ACPI for IRQ routing
[ 1.588192] PCI: pci_cache_line_size set to 64 bytes
[ 1.593319] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 1.599537] reserve RAM buffer: 00000000cf65f000 - 00000000cfffffff
[ 1.606060] NetLabel: Initializing
[ 1.609760] NetLabel: domain hash size = 128
[ 1.614168] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.619188] NetLabel: unlabeled traffic allowed by default
[ 1.624837] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.631639] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.639532] Switching to clocksource hpet
[ 1.648052] AppArmor: AppArmor Filesystem Enabled
[ 1.652837] pnp: PnP ACPI init
[ 1.655960] ACPI: bus type pnp registered
[ 1.660275] pnp 00:00: [bus 00-3e]
[ 1.663738] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.668500] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.672652] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.677412] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.682865] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.688316] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.693768] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.699219] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.704669] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.710121] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.715570] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.721021] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.726473] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.731926] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.737377] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.742827] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.748280] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.753733] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[ 1.759184] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.764682] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 1.771981] pnp 00:01: [io 0x0000-0x001f]
[ 1.776135] pnp 00:01: [io 0x0081-0x0091]
[ 1.780287] pnp 00:01: [io 0x0093-0x009f]
[ 1.784440] pnp 00:01: [io 0x00c0-0x00df]
[ 1.788593] pnp 00:01: [dma 4]
[ 1.791717] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.798299] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.803153] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.809783] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.814643] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.821226] pnp 00:04: [io 0x00f0]
[ 1.824779] pnp 00:04: [irq 13]
[ 1.827992] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.834574] pnp 00:05: [io 0x002e-0x002f]
[ 1.838726] pnp 00:05: [io 0x004e-0x004f]
[ 1.842878] pnp 00:05: [io 0x0061]
[ 1.846420] pnp 00:05: [io 0x0063]
[ 1.849963] pnp 00:05: [io 0x0065]
[ 1.853508] pnp 00:05: [io 0x0067]
[ 1.857054] pnp 00:05: [io 0x0070]
[ 1.860600] pnp 00:05: [io 0x0080]
[ 1.864146] pnp 00:05: [io 0x0092]
[ 1.867691] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.871843] pnp 00:05: [io 0x0680-0x069f]
[ 1.875995] pnp 00:05: [io 0x1000-0x1003]
[ 1.880144] pnp 00:05: [io 0x1004-0x1013]
[ 1.884296] pnp 00:05: [io 0xffff]
[ 1.887842] pnp 00:05: [io 0x0400-0x047f]
[ 1.891992] pnp 00:05: [io 0x0500-0x057f]
[ 1.896144] pnp 00:05: [io 0x164e-0x164f]
[ 1.900330] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.906304] system 00:05: [io 0x1000-0x1003] has been reserved
[ 1.912276] system 00:05: [io 0x1004-0x1013] has been reserved
[ 1.918248] system 00:05: [io 0xffff] has been reserved
[ 1.923611] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.929582] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.935552] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.941522] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.948367] pnp 00:06: [io 0x0070-0x0077]
[ 1.952523] pnp 00:06: [irq 8]
[ 1.955648] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.962230] pnp 00:07: [io 0x0060]
[ 1.965777] pnp 00:07: [io 0x0064]
[ 1.969325] pnp 00:07: [irq 1]
[ 1.972450] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.980087] pnp 00:08: [io 0x03f8-0x03ff]
[ 1.984244] pnp 00:08: [irq 4]
[ 1.987398] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.994883] pnp 00:09: [io 0x0378-0x037b]
[ 1.999041] pnp 00:09: [irq 7]
[ 2.002181] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 2.008768] pnp 00:0a: [irq 12]
[ 2.011984] pnp 00:0a: Plug and Play ACPI device, IDs DLL040a PNP0f13
(active)
[ 2.019424] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 2.024273] pnp 00:0b: [mem 0xfed10000-0xfed13fff]
[ 2.029118] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 2.033964] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 2.038810] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 2.043654] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 2.048499] pnp 00:0b: [mem 0xfed90000-0xfed8ffff disabled]
[ 2.054122] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 2.058965] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 2.063810] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 2.068654] pnp 00:0b: [mem 0xe96c0000-0xe96c0fff]
[ 2.073532] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.080199] system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved
[ 2.086864] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.093526] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.100190] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.106853] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.113515] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.120178] system 00:0b: [mem 0xff000000-0xffffffff] could not be
reserved
[ 2.127191] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 2.134202] system 00:0b: [mem 0xe96c0000-0xe96c0fff] has been reserved
[ 2.140866] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.147756] pnp 00:0c: [irq 23]
[ 2.150977] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.158645] pnp 00:0d: [bus 3f]
[ 2.161874] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 118.756113] pnp: PnP ACPI: found 14 devices
[ 118.760526] ACPI: ACPI bus type pnp unregistered
[ 118.801225] PCI: max bus depth: 2 pci_try_num: 3
[ 118.805957] pci 0000:00:1c.3: BAR 15: assigned [mem
0xe9700000-0xe98fffff 64bit pref]
[ 118.813845] pci 0000:00:1c.2: BAR 15: assigned [mem
0xec000000-0xefffffff pref]
[ 118.821214] pci 0000:00:1c.1: BAR 15: assigned [mem
0xe9900000-0xe9afffff 64bit pref]
[ 118.829103] pci 0000:00:1c.0: BAR 15: assigned [mem
0xe9b00000-0xe9cfffff 64bit pref]
[ 118.836989] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 118.842266] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 118.848411] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
[ 118.855248] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 118.860526] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 118.866673] pci 0000:00:1c.0: bridge window [mem 0xe8200000-0xe95fffff]
[ 118.873514] pci 0000:00:1c.0: bridge window [mem
0xe9b00000-0xe9cfffff 64bit pref]
[ 118.881320] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 118.886601] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 118.894453] pci 0000:00:1c.1: bridge window [mem 0xe6e00000-0xe81fffff]
[ 118.901292] pci 0000:00:1c.1: bridge window [mem
0xe9900000-0xe9afffff 64bit pref]
[ 118.909098] pci 0000:04:00.0: BAR 16: can't assign mem (size 0x4000000)
[ 118.915764] pci 0000:04:00.0: BAR 15: assigned [mem
0xec000000-0xefffffff pref]
[ 118.923133] pci 0000:04:00.0: BAR 14: assigned [io 0x2000-0x20ff]
[ 118.929363] pci 0000:04:00.0: BAR 13: assigned [io 0x2400-0x24ff]
[ 118.935595] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
[ 118.941220] pci 0000:04:00.0: bridge window [io 0x2400-0x24ff]
[ 118.947370] pci 0000:04:00.0: bridge window [io 0x2000-0x20ff]
[ 118.953517] pci 0000:04:00.0: bridge window [mem
0xec000000-0xefffffff pref]
next prev parent reply other threads:[~2012-01-16 14:00 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-10 20:15 brcm80211 breakage Linus Torvalds
2012-01-11 10:44 ` Arend van Spriel
2012-01-11 15:05 ` Linus Torvalds
2012-01-11 16:04 ` Linus Torvalds
2012-01-11 17:00 ` Larry Finger
2012-01-12 1:06 ` Linus Torvalds
2012-01-12 1:46 ` Larry Finger
2012-01-12 1:58 ` Linus Torvalds
2012-01-12 2:11 ` Linus Torvalds
2012-01-12 4:15 ` Larry Finger
2012-01-12 5:20 ` Linus Torvalds
2012-01-12 5:30 ` Linus Torvalds
2012-01-12 7:08 ` Rafał Miłecki
2012-01-12 7:10 ` Rafał Miłecki
2012-01-12 7:18 ` Linus Torvalds
2012-01-12 15:39 ` Larry Finger
2012-01-12 15:46 ` Rafał Miłecki
2012-01-12 7:13 ` Linus Torvalds
2012-01-12 7:18 ` Rafał Miłecki
2012-01-12 7:22 ` Linus Torvalds
2012-01-12 10:03 ` Arend van Spriel
2012-01-12 15:51 ` Linus Torvalds
2012-01-12 19:00 ` Linus Torvalds
2012-01-12 19:08 ` Linus Torvalds
2012-01-12 20:09 ` Arend van Spriel
2012-01-12 20:27 ` Linus Torvalds
2012-01-12 20:36 ` Arend van Spriel
2012-01-12 22:38 ` Linus Torvalds
2012-01-12 22:42 ` Rafał Miłecki
2012-01-12 22:45 ` Linus Torvalds
2012-01-12 23:04 ` Rafał Miłecki
2012-01-13 0:13 ` Linus Torvalds
2012-01-13 2:30 ` Linus Torvalds
2012-01-13 5:34 ` Linus Torvalds
2012-01-13 6:50 ` Rafał Miłecki
2012-01-13 6:57 ` Rafał Miłecki
2012-01-13 7:17 ` Linus Torvalds
2012-01-13 7:41 ` [PATCH] bcma: s&r: NULL mapped core Rafał Miłecki
2012-01-13 7:53 ` Linus Torvalds
2012-01-13 7:59 ` [0/5] bcma/brcmsmac suspend/resume cleanups and fixes Linus Torvalds
2012-01-13 8:00 ` [PATCH 1/5] bcma: convert suspend/resume to pm_ops Linus Torvalds
2012-01-13 9:58 ` Arend van Spriel
2012-01-13 10:01 ` Rafał Miłecki
2012-01-13 8:00 ` [PATCH 2/5] bcma: add stub for bcma_bus suspend() Linus Torvalds
2012-01-13 8:01 ` [PATCH 3/5] bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume Linus Torvalds
2012-01-13 8:01 ` [PATCH 4/5] brcmsmac: remove PCI suspend/resume from bcma driver Linus Torvalds
2012-01-13 9:59 ` Arend van Spriel
2012-01-13 8:02 ` [PATCH 5/5] bcma: invalidate the mapped window over suspend/resume Linus Torvalds
2012-01-13 10:03 ` [0/5] bcma/brcmsmac suspend/resume cleanups and fixes Rafał Miłecki
2012-01-13 16:15 ` Linus Torvalds
2012-01-13 11:06 ` Arend van Spriel
2012-01-13 16:23 ` Linus Torvalds
2012-01-14 3:50 ` Linus Torvalds
2012-01-14 12:22 ` Dominique Martinet
2012-01-14 14:34 ` Rafał Miłecki
2012-01-14 15:07 ` Dominique Martinet
2012-01-14 19:15 ` Linus Torvalds
2012-01-14 23:08 ` Dominique Martinet
2012-01-14 23:28 ` Linus Torvalds
2012-01-14 17:36 ` Arend van Spriel
2012-01-16 14:00 ` Arend van Spriel [this message]
2012-01-16 17:33 ` Arend van Spriel
2012-01-17 1:12 ` Linus Torvalds
2012-01-17 10:37 ` Arend van Spriel
2012-01-19 9:42 ` Arend van Spriel
2012-01-19 12:12 ` Arend van Spriel
2012-01-19 16:15 ` Linus Torvalds
2012-01-13 7:13 ` brcm80211 breakage Linus Torvalds
2012-01-12 19:46 ` Arend van Spriel
2012-01-13 1:53 ` Larry Finger
2012-01-31 12:08 ` Henrik Rydberg
2012-01-31 17:02 ` Linus Torvalds
2012-01-31 19:08 ` Arend van Spriel
2012-01-31 19:25 ` John W. Linville
2012-01-31 19:35 ` Arend van Spriel
2012-01-31 19:58 ` Henrik Rydberg
2012-01-31 20:21 ` Arend van Spriel
2012-01-31 22:23 ` Henrik Rydberg
2012-01-31 19:36 ` Henrik Rydberg
2012-01-31 19:49 ` Arend van Spriel
2012-01-12 13:13 ` Arend van Spriel
2012-01-12 16:22 ` Larry Finger
2012-01-12 17:18 ` Larry Finger
2012-01-12 17:31 ` Linus Torvalds
2012-01-12 17:44 ` Larry Finger
2012-01-11 21:01 ` Arend van Spriel
2012-01-12 0:07 ` Linus Torvalds
2012-01-11 17:15 ` Ben Hutchings
2012-01-12 0:10 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F142D84.4060405@broadcom.com \
--to=arend@broadcom.com \
--cc=Larry.Finger@lwfinger.net \
--cc=alwin@broadcom.com \
--cc=frankyl@broadcom.com \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=rvossen@broadcom.com \
--cc=torvalds@linux-foundation.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.