From: "Arend van Spriel" <arend@broadcom.com>
To: "Linus Torvalds" <torvalds@linux-foundation.org>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"Larry Finger" <Larry.Finger@lwfinger.net>,
"Alwin Beukers" <alwin@broadcom.com>,
"Roland Vossen" <rvossen@broadcom.com>,
"John W. Linville" <linville@tuxdriver.com>,
"Network Development" <netdev@vger.kernel.org>,
"Franky (Zhenhui) Lin" <frankyl@broadcom.com>
Subject: Re: [0/5] bcma/brcmsmac suspend/resume cleanups and fixes
Date: Mon, 16 Jan 2012 18:33:06 +0100 [thread overview]
Message-ID: <4F145F52.9010200@broadcom.com> (raw)
In-Reply-To: <4F142D84.4060405@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 1729 bytes --]
On 01/16/2012 03:00 PM, Arend van Spriel wrote:
> On 01/14/2012 04:50 AM, Linus Torvalds wrote:
>> 2012/1/13 Arend van Spriel <arend@broadcom.com>:
>>>
>>> Upon suspend my laptop hangs (see trace below pulled from serial
>>> console). I do not see the pr_debug in the suspend function (compiled
>>> with -DDEBUG). Unfortunately the same happens when I don't insert bcma
>>> and brcmsmac. I attached the kernel configuration.
>>
>> Ok, I note that you do have MCE enabled.
>>
>> The MCE problems should be fixed in current -git, and so it might be
>> worth re-testing with that.
>>
>> Linus
>>
>
> Hi Linus,
>
> I build a kernel with MCE disabled and tested that. It still hung. I
> decided run the kernel with nomodeset parameter to avoid framebuffer
> issues. Now the suspend worked, but resume failed. Just heard a beep and
> that was it. I will refresh the tree and build another kernel with MCE
> enabled.
>
I build a new kernel with MCE enabled. Same issue. I did not load bcma
or brcmsmac yet. Attached is trace I could pull from the kernel log
(str-test-*).
I also tried the pm_test and attached the trace for that
(str-devices-*). No bcma/brcmsmac test done with it yet.
Gr. AvS
-----------------------------------
version: 3.2.0-08699-ga93ce74
a93ce74 bcma: invalidate the mapped window over suspend/resume
d205a29 brcmsmac: remove PCI suspend/resume from bcma driver
310c9f8 bcma: connect the bcma bus suspend/resume to the bcma driver
suspend/res
6f55bd0 bcma: add stub for bcma_bus suspend()
83d836c bcma: convert suspend/resume to pm_ops
53999bf error: implicit declaration of function 'module_flags_taint'
122804e Merge branch 'v4l_for_linus' of
git://git.kernel.org/pub/scm/linux/kerne
[-- Attachment #2: str-test-3.2.0-08699-ga93ce74.log --]
[-- Type: text/plain, Size: 20421 bytes --]
Jan 16 16:12:18 arend-lp-dev kernel: [ 18.677791] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 16 16:12:18 arend-lp-dev kernel: [ 18.750899] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Jan 16 16:12:18 arend-lp-dev kernel: [ 19.527827] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:19 arend-lp-dev kernel: [ 19.536249] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:25 arend-lp-dev kernel: [ 26.004187] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:25 arend-lp-dev kernel: [ 26.012413] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:26 arend-lp-dev kernel: [ 27.277853] PM: Syncing filesystems ... done.
Jan 16 16:12:26 arend-lp-dev kernel: [ 27.282818] PM: Preparing system for mem sleep
Jan 16 16:12:51 arend-lp-dev kernel: [ 27.287317] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 16 16:12:51 arend-lp-dev kernel: [ 27.307802] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 16 16:12:51 arend-lp-dev kernel: [ 27.327823] PM: Entering mem sleep
Jan 16 16:12:51 arend-lp-dev kernel: [ 27.331518] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 16 16:12:51 arend-lp-dev kernel: [ 27.401472] sd 0:0:0:0: [sda] Stopping disk
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.419112] serial 00:08: disabled
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.419347] serial 00:08: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.427126] ACPI handle has no context!
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.485022] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.866326] ACPI handle has no context!
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.882283] PM: suspend of devices complete after 1553.559 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.882655] PM: suspend devices took 1.556 seconds
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.883343] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.898388] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.914277] PM: late suspend of devices complete after 31.374 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.914834] ACPI: Preparing to enter system sleep state S3
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.934410] PM: Saving platform NVS memory
Jan 16 16:12:51 arend-lp-dev kernel: [ 28.935334] Disabling non-boot CPUs ...
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.038021] CPU 1 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.038513] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.038813] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.039225] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.039499] Device 'machinecheck1' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.040054] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.044752] Pid: 1272, comm: pm-suspend Not tainted 3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.045169] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.045367] [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.045702] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.046022] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.046341] [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.046663] [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.046975] [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.047289] [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.047586] [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.047894] [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.048207] [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.048502] [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.048830] [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.049156] [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.049493] [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.049853] [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.050158] [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.050485] [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.050780] [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.051124] [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.051494] [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.051802] [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.052106] [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.052468] [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.052786] [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.053112] [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.053407] [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.053710] [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.054002] [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.054320] ---[ end trace 2172e4a3414a456b ]---
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.157826] CPU 2 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.158290] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.158598] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.159015] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.159286] Device 'machinecheck2' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.159836] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.164520] Pid: 1272, comm: pm-suspend Tainted: G W 3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.165000] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.165198] [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.165536] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.165860] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.166182] [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.166507] [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.166822] [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.167139] [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.167440] [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.167749] [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.168064] [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.168360] [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.168687] [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.169015] [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.169351] [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.169712] [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.170017] [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.170344] [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.170639] [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.170984] [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.171353] [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.171661] [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.171965] [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.172326] [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.172646] [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.172974] [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.173268] [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.173571] [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.173864] [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.174183] ---[ end trace 2172e4a3414a456c ]---
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.277612] CPU 3 is now offline
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.278082] ------------[ cut here ]------------
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.278392] WARNING: at drivers/base/core.c:194 device_release+0x76/0x80()
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.278810] Hardware name: Latitude E6410
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.279082] Device 'machinecheck3' does not have a release() function, it is broken and must be fixed.
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.279631] Modules linked in: binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt nouveau snd_hda_intel snd_hda_codec ttm snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd drm_kms_helper psmouse serio_raw dell_laptop drm intel_agp intel_gtt dcdbas mxm_wmi dell_wmi video sparse_keymap soundcore snd_page_alloc intel_ips agpgart firewire_ohci firewire_core crc_itu_t ahci libahci sdhci_pci sdhci mmc_core e1000e
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.284313] Pid: 1272, comm: pm-suspend Tainted: G W 3.2.0-08699-ga93ce74 #1
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.284791] Call Trace:
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.284989] [<c10305e2>] warn_slowpath_common+0x72/0xa0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.285327] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.285649] [<c131dfa6>] ? device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.285969] [<c10306b3>] warn_slowpath_fmt+0x33/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.286294] [<c131dfa6>] device_release+0x76/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.286608] [<c1273e2a>] kobject_release+0x3a/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.286923] [<c1273d17>] kobject_put+0x27/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.287222] [<c1273de2>] ? kobject_del+0x22/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.287529] [<c131e975>] ? device_del+0x125/0x150
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.287843] [<c131ddf4>] put_device+0x14/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.288139] [<c131e9b7>] device_unregister+0x17/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.288466] [<c14a5256>] mce_cpu_callback+0xc3/0x155
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.288793] [<c14b64a5>] notifier_call_chain+0x45/0x60
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.289130] [<c1053e1e>] __raw_notifier_call_chain+0x1e/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.289492] [<c1031fa4>] __cpu_notify+0x24/0x40
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.289797] [<c10320cc>] cpu_notify_nofail+0x1c/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.290123] [<c149929d>] _cpu_down+0xdd/0x250
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.290418] [<c10321b4>] disable_nonboot_cpus+0x74/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.290763] [<c1083183>] suspend_devices_and_enter+0x173/0x2e0
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.291133] [<c108342c>] enter_state+0x13c/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.291440] [<c10820aa>] state_store+0x8a/0x110
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.291744] [<c1082020>] ? pm_trace_dev_match_show+0x20/0x20
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.292106] [<c1273c2b>] kobj_attr_store+0x1b/0x30
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.292425] [<c1177bb6>] sysfs_write_file+0xa6/0x100
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.292753] [<c112047f>] vfs_write+0x8f/0x160
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.293048] [<c1177b10>] ? sysfs_poll+0x80/0x80
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.293353] [<c112075d>] sys_write+0x3d/0x70
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.293647] [<c14b99df>] sysenter_do_call+0x12/0x28
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.293969] ---[ end trace 2172e4a3414a456d ]---
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.294358] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.294850] ACPI: Low-level resume complete
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.303805] PM: Restoring platform NVS memory
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.313487] CPU0: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.323835] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.331436] Enabling non-boot CPUs ...
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.339449] Booting Node 0 Processor 1 APIC 0x4
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.349018] smpboot cpu 1: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.368076] Initializing CPU#1
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.374474] CPU1: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.384668] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.418661] CPU1 is up
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.424231] Booting Node 0 Processor 2 APIC 0x1
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.433796] smpboot cpu 2: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.452775] Initializing CPU#2
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.459175] CPU2: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.469367] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.503620] CPU2 is up
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.509235] Booting Node 0 Processor 3 APIC 0x5
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.518804] smpboot cpu 3: start_ip = 96000
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.537782] Initializing CPU#3
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.544180] CPU3: Thermal monitoring handled by SMI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.554374] Calibrating delay loop (skipped) already calibrated this CPU
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.588799] CPU3 is up
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.596812] ACPI: Waking up from system sleep state S3
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.674203] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.688278] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.702906] PM: early resume of devices complete after 28.947 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.716520] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.716533] pci 0000:00:1e.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.740208] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.740236] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.740269] ahci 0000:00:1f.2: setting latency timer to 64
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.740372] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.740599] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.769722] firewire_ohci 0000:04:00.4: irq 44 for MSI/MSI-X
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.769958] firewire_core: skipped bus generations, destroying all nodes
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.863455] serial 00:08: activated
Jan 16 16:12:51 arend-lp-dev kernel: [ 29.871831] Extended CMOS year: 2000
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.021390] usb 1-1.4: reset high-speed USB device number 5 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.245011] usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.268745] firewire_core: rediscovered device fw0
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.383564] dell_wmi: Received unknown WMI event (0x11)
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.516494] usb 1-1.1: reset high-speed USB device number 3 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.574062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.627212] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.728834] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.803763] ata1.00: configured for UDMA/133
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.855809] sd 0:0:0:0: [sda] Starting disk
Jan 16 16:12:51 arend-lp-dev kernel: [ 30.923815] usb 2-1.7: reset full-speed USB device number 3 using ehci_hcd
Jan 16 16:12:51 arend-lp-dev kernel: [ 31.175196] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [ 31.232457] ata2.00: configured for UDMA/133
Jan 16 16:12:51 arend-lp-dev kernel: [ 31.602454] ata5: SATA link down (SStatus 0 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [ 31.981797] ata6: SATA link down (SStatus 0 SControl 300)
Jan 16 16:12:51 arend-lp-dev kernel: [ 32.043966] PM: resume of devices complete after 2331.835 msecs
Jan 16 16:12:51 arend-lp-dev kernel: [ 32.093540] PM: resume devices took 2.384 seconds
Jan 16 16:12:51 arend-lp-dev kernel: [ 32.132899] PM: Finishing wakeup.
Jan 16 16:12:51 arend-lp-dev kernel: [ 32.161537] Restarting tasks ... done.
Jan 16 16:12:51 arend-lp-dev kernel: [ 32.194440] video LNXVIDEO:00: Restoring backlight state
Jan 16 16:12:52 arend-lp-dev kernel: [ 32.478127] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:52 arend-lp-dev kernel: [ 32.572872] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:12:52 arend-lp-dev kernel: [ 32.615312] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 16 16:12:52 arend-lp-dev kernel: [ 33.072987] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Jan 16 16:12:52 arend-lp-dev kernel: [ 33.130491] EXT4-fs (sda7): re-mounted. Opts: commit=0
Jan 16 16:12:57 arend-lp-dev kernel: [ 37.306898] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
Jan 16 16:12:57 arend-lp-dev kernel: [ 37.428430] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[-- Attachment #3: str-devices-3.2.0-08699-ga93ce74.log --]
[-- Type: text/plain, Size: 4259 bytes --]
Jan 16 16:31:05 arend-lp-dev kernel: [ 31.970129] eth0: no IPv6 routers present
Jan 16 16:32:35 arend-lp-dev kernel: [ 121.206168] PM: Syncing filesystems ... done.
Jan 16 16:32:35 arend-lp-dev kernel: [ 121.212149] PM: Preparing system for mem sleep
Jan 16 16:32:45 arend-lp-dev kernel: [ 121.218917] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 16 16:32:45 arend-lp-dev kernel: [ 121.241792] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 16 16:32:45 arend-lp-dev kernel: [ 121.261752] PM: Entering mem sleep
Jan 16 16:32:45 arend-lp-dev kernel: [ 121.265688] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jan 16 16:32:45 arend-lp-dev kernel: [ 121.271175] sd 0:0:0:0: [sda] Stopping disk
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.288913] serial 00:08: disabled
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.289156] serial 00:08: wake-up capability disabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.296717] ACPI handle has no context!
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.462403] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.735645] ACPI handle has no context!
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.751704] PM: suspend of devices complete after 1489.550 msecs
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.752076] PM: suspend devices took 1.492 seconds
Jan 16 16:32:45 arend-lp-dev kernel: [ 122.752383] suspend debug: Waiting for 5 seconds.
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.704535] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.705016] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.705079] pci 0000:00:1e.0: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.720139] serial 00:08: activated
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.720612] ahci 0000:00:1f.2: setting latency timer to 64
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.724613] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.724702] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.724859] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.746911] Extended CMOS year: 2000
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.776912] firewire_ohci 0000:04:00.4: irq 44 for MSI/MSI-X
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.824410] firewire_core: skipped bus generations, destroying all nodes
Jan 16 16:32:45 arend-lp-dev kernel: [ 127.948095] usb 2-1.8: reset full-speed USB device number 4 using ehci_hcd
Jan 16 16:32:45 arend-lp-dev kernel: [ 128.379055] firewire_core: rediscovered device fw0
Jan 16 16:32:45 arend-lp-dev kernel: [ 128.546605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [ 128.601041] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.368669] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.442643] ata1.00: configured for UDMA/133
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.481050] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.558218] sd 0:0:0:0: [sda] Starting disk
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.877461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [ 130.936864] ata2.00: configured for UDMA/133
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.308497] ata5: SATA link down (SStatus 0 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.687650] ata6: SATA link down (SStatus 0 SControl 300)
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.749779] PM: resume of devices complete after 4054.352 msecs
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.799418] PM: resume devices took 4.104 seconds
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.838746] PM: Finishing wakeup.
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.866444] Restarting tasks ... done.
Jan 16 16:32:45 arend-lp-dev kernel: [ 131.903604] video LNXVIDEO:00: Restoring backlight state
next prev parent reply other threads:[~2012-01-16 17:33 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-10 20:15 brcm80211 breakage Linus Torvalds
2012-01-11 10:44 ` Arend van Spriel
2012-01-11 15:05 ` Linus Torvalds
2012-01-11 16:04 ` Linus Torvalds
2012-01-11 17:00 ` Larry Finger
2012-01-12 1:06 ` Linus Torvalds
2012-01-12 1:46 ` Larry Finger
2012-01-12 1:58 ` Linus Torvalds
2012-01-12 2:11 ` Linus Torvalds
2012-01-12 4:15 ` Larry Finger
2012-01-12 5:20 ` Linus Torvalds
2012-01-12 5:30 ` Linus Torvalds
2012-01-12 7:08 ` Rafał Miłecki
2012-01-12 7:10 ` Rafał Miłecki
2012-01-12 7:18 ` Linus Torvalds
2012-01-12 15:39 ` Larry Finger
2012-01-12 15:46 ` Rafał Miłecki
2012-01-12 7:13 ` Linus Torvalds
2012-01-12 7:18 ` Rafał Miłecki
2012-01-12 7:22 ` Linus Torvalds
2012-01-12 10:03 ` Arend van Spriel
2012-01-12 15:51 ` Linus Torvalds
2012-01-12 19:00 ` Linus Torvalds
2012-01-12 19:08 ` Linus Torvalds
2012-01-12 20:09 ` Arend van Spriel
2012-01-12 20:27 ` Linus Torvalds
2012-01-12 20:36 ` Arend van Spriel
2012-01-12 22:38 ` Linus Torvalds
2012-01-12 22:42 ` Rafał Miłecki
2012-01-12 22:45 ` Linus Torvalds
2012-01-12 23:04 ` Rafał Miłecki
2012-01-13 0:13 ` Linus Torvalds
2012-01-13 2:30 ` Linus Torvalds
2012-01-13 5:34 ` Linus Torvalds
2012-01-13 6:50 ` Rafał Miłecki
2012-01-13 6:57 ` Rafał Miłecki
2012-01-13 7:17 ` Linus Torvalds
2012-01-13 7:41 ` [PATCH] bcma: s&r: NULL mapped core Rafał Miłecki
2012-01-13 7:53 ` Linus Torvalds
2012-01-13 7:59 ` [0/5] bcma/brcmsmac suspend/resume cleanups and fixes Linus Torvalds
2012-01-13 8:00 ` [PATCH 1/5] bcma: convert suspend/resume to pm_ops Linus Torvalds
2012-01-13 9:58 ` Arend van Spriel
2012-01-13 10:01 ` Rafał Miłecki
2012-01-13 8:00 ` [PATCH 2/5] bcma: add stub for bcma_bus suspend() Linus Torvalds
2012-01-13 8:01 ` [PATCH 3/5] bcma: connect the bcma bus suspend/resume to the bcma driver suspend/resume Linus Torvalds
2012-01-13 8:01 ` [PATCH 4/5] brcmsmac: remove PCI suspend/resume from bcma driver Linus Torvalds
2012-01-13 9:59 ` Arend van Spriel
2012-01-13 8:02 ` [PATCH 5/5] bcma: invalidate the mapped window over suspend/resume Linus Torvalds
2012-01-13 10:03 ` [0/5] bcma/brcmsmac suspend/resume cleanups and fixes Rafał Miłecki
2012-01-13 16:15 ` Linus Torvalds
2012-01-13 11:06 ` Arend van Spriel
2012-01-13 16:23 ` Linus Torvalds
2012-01-14 3:50 ` Linus Torvalds
2012-01-14 12:22 ` Dominique Martinet
2012-01-14 14:34 ` Rafał Miłecki
2012-01-14 15:07 ` Dominique Martinet
2012-01-14 19:15 ` Linus Torvalds
2012-01-14 23:08 ` Dominique Martinet
2012-01-14 23:28 ` Linus Torvalds
2012-01-14 17:36 ` Arend van Spriel
2012-01-16 14:00 ` Arend van Spriel
2012-01-16 17:33 ` Arend van Spriel [this message]
2012-01-17 1:12 ` Linus Torvalds
2012-01-17 10:37 ` Arend van Spriel
2012-01-19 9:42 ` Arend van Spriel
2012-01-19 12:12 ` Arend van Spriel
2012-01-19 16:15 ` Linus Torvalds
2012-01-13 7:13 ` brcm80211 breakage Linus Torvalds
2012-01-12 19:46 ` Arend van Spriel
2012-01-13 1:53 ` Larry Finger
2012-01-31 12:08 ` Henrik Rydberg
2012-01-31 17:02 ` Linus Torvalds
2012-01-31 19:08 ` Arend van Spriel
2012-01-31 19:25 ` John W. Linville
2012-01-31 19:35 ` Arend van Spriel
2012-01-31 19:58 ` Henrik Rydberg
2012-01-31 20:21 ` Arend van Spriel
2012-01-31 22:23 ` Henrik Rydberg
2012-01-31 19:36 ` Henrik Rydberg
2012-01-31 19:49 ` Arend van Spriel
2012-01-12 13:13 ` Arend van Spriel
2012-01-12 16:22 ` Larry Finger
2012-01-12 17:18 ` Larry Finger
2012-01-12 17:31 ` Linus Torvalds
2012-01-12 17:44 ` Larry Finger
2012-01-11 21:01 ` Arend van Spriel
2012-01-12 0:07 ` Linus Torvalds
2012-01-11 17:15 ` Ben Hutchings
2012-01-12 0:10 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F145F52.9010200@broadcom.com \
--to=arend@broadcom.com \
--cc=Larry.Finger@lwfinger.net \
--cc=alwin@broadcom.com \
--cc=frankyl@broadcom.com \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=rvossen@broadcom.com \
--cc=torvalds@linux-foundation.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.