* [Qemu-devel] [PATCH v9 1/9] ARM: exynos4210: IRQ subsystem support.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 2/9] ARM: Samsung exynos4210-based boards emulation Evgeny Voevodin
` (7 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
Makefile.target | 1 +
hw/exynos4210.h | 82 ++++++++
hw/exynos4210_combiner.c | 472 ++++++++++++++++++++++++++++++++++++++++++++++
hw/exynos4210_gic.c | 436 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 991 insertions(+), 0 deletions(-)
create mode 100644 hw/exynos4210.h
create mode 100644 hw/exynos4210_combiner.c
create mode 100644 hw/exynos4210_gic.c
diff --git a/Makefile.target b/Makefile.target
index 06d79b8..4ac257e 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -339,6 +339,7 @@ obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
+obj-arm-y += exynos4210_gic.o exynos4210_combiner.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.h b/hw/exynos4210.h
new file mode 100644
index 0000000..cef264b
--- /dev/null
+++ b/hw/exynos4210.h
@@ -0,0 +1,82 @@
+/*
+ * Samsung exynos4210 SoC emulation
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
+ * Maksim Kozlov <m.kozlov@samsung.com>
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ * Igor Mitsyanko <i.mitsyanko@samsung.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+
+#ifndef EXYNOS4210_H_
+#define EXYNOS4210_H_
+
+#include "qemu-common.h"
+#include "memory.h"
+
+#define EXYNOS4210_MAX_CPUS 2
+
+/*
+ * exynos4210 IRQ subsystem stub definitions.
+ */
+#define EXYNOS4210_IRQ_GATE_NINPUTS 8
+
+#define EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ 64
+#define EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ 16
+#define EXYNOS4210_MAX_INT_COMBINER_IN_IRQ \
+ (EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ * 8)
+#define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \
+ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8)
+
+#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit))
+#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8)
+#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \
+ ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq))
+
+/* IRQs number for external and internal GIC */
+#define EXYNOS4210_EXT_GIC_NIRQ (160-32)
+#define EXYNOS4210_INT_GIC_NIRQ 64
+
+typedef struct Exynos4210Irq {
+ qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ];
+ qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ];
+ qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ];
+ qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ];
+ qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ];
+} Exynos4210Irq;
+
+/* Initialize exynos4210 IRQ subsystem stub */
+qemu_irq *exynos4210_init_irq(Exynos4210Irq *env);
+
+/* Initialize board IRQs.
+ * These IRQs contain splitted Int/External Combiner and External Gic IRQs */
+void exynos4210_init_board_irqs(Exynos4210Irq *s);
+
+/* Get IRQ number from exynos4210 IRQ subsystem stub.
+ * To identify IRQ source use internal combiner group and bit number
+ * grp - group number
+ * bit - bit number inside group */
+uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit);
+
+/*
+ * Get Combiner input GPIO into irqs structure
+ */
+void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev,
+ int ext);
+
+#endif /* EXYNOS4210_H_ */
diff --git a/hw/exynos4210_combiner.c b/hw/exynos4210_combiner.c
new file mode 100644
index 0000000..84e692b
--- /dev/null
+++ b/hw/exynos4210_combiner.c
@@ -0,0 +1,472 @@
+/*
+ * Samsung exynos4210 Interrupt Combiner
+ *
+ * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd.
+ * All rights reserved.
+ *
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Exynos4210 Combiner represents an OR gate for SOC's IRQ lines. It combines
+ * IRQ sources into groups and provides signal output to GIC from each group. It
+ * is driven by common mask and enable/disable logic. Take a note that not all
+ * IRQs are passed to GIC through Combiner.
+ */
+
+#include "sysbus.h"
+
+#include "exynos4210.h"
+
+//#define DEBUG_COMBINER
+
+#ifdef DEBUG_COMBINER
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stdout, "COMBINER: [%s:%d] " fmt, __func__ , __LINE__, \
+ ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while (0)
+#endif
+
+#define IIC_NGRP 64 /* Internal Interrupt Combiner
+ Groups number */
+#define IIC_NIRQ (IIC_NGRP * 8)/* Internal Interrupt Combiner
+ Interrupts number */
+#define IIC_REGION_SIZE 0x108 /* Size of memory mapped region */
+#define IIC_REGSET_SIZE 0x41
+
+/*
+ * Combiner registers
+ */
+struct CombinerReg {
+ uint32_t iiesr; /* Internal Interrupt Enable Set register */
+ uint32_t iiecr; /* Internal Interrupt Enable Clear register */
+ uint32_t iistr; /* Internal Interrupt Status register.
+ * Shows status of interrupt pending BEFORE masking
+ */
+ uint32_t iimsr; /* Internal Interrupt Mask Status register.
+ * Shows status of interrupt pending AFTER masking
+ */
+};
+
+/*
+ * State for each output signal of internal combiner
+ */
+typedef struct CombinerGroupState {
+ uint8_t src_mask; /* 1 - source enabled, 0 - disabled */
+ uint8_t src_pending; /* Pending source interrupts before masking */
+} CombinerGroupState;
+
+typedef struct Exynos4210CombinerState {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ struct CombinerGroupState group[IIC_NGRP];
+ uint32_t reg_set[IIC_REGSET_SIZE];
+ uint32_t icipsr[2];
+ uint32_t external; /* 1 means that this combiner is external */
+
+ qemu_irq output_irq[IIC_NGRP];
+} Exynos4210CombinerState;
+
+static const VMStateDescription VMState_Exynos4210CombinerGroupState = {
+ .name = "exynos4210.combiner.groupstate",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(src_mask, CombinerGroupState),
+ VMSTATE_UINT8(src_pending, CombinerGroupState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_Exynos4210Combiner = {
+ .name = "exynos4210.combiner",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT_ARRAY(group, Exynos4210CombinerState, IIC_NGRP, 0,
+ VMState_Exynos4210CombinerGroupState, CombinerGroupState),
+ VMSTATE_UINT32_ARRAY(reg_set, Exynos4210CombinerState,
+ IIC_REGSET_SIZE),
+ VMSTATE_UINT32_ARRAY(icipsr, Exynos4210CombinerState, 2),
+ VMSTATE_UINT32(external, Exynos4210CombinerState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/*
+ * Get Combiner input GPIO into irqs structure
+ */
+void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev,
+ int ext)
+{
+ int n;
+ int bit;
+ int max;
+ qemu_irq *irq;
+
+ max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ :
+ EXYNOS4210_MAX_INT_COMBINER_IN_IRQ;
+ irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq;
+
+ /*
+ * Some IRQs of Int/External Combiner are going to two Combiners groups,
+ * so let split them.
+ */
+ for (n = 0; n < max; n++) {
+
+ bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n);
+
+ switch (n) {
+ /* MDNIE_LCD1 INTG1 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]);
+ continue;
+
+ /* TMU INTG3 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]);
+ continue;
+
+ /* LCD1 INTG12 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]);
+ continue;
+
+ /* Multi-Core Timer INTG12 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]);
+ continue;
+
+ /* Multi-Core Timer INTG35 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]);
+ continue;
+
+ /* Multi-Core Timer INTG51 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]);
+ continue;
+
+ /* Multi-Core Timer INTG53 */
+ case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ...
+ EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8):
+ irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n),
+ irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]);
+ continue;
+ }
+
+ irq[n] = qdev_get_gpio_in(dev, n);
+ }
+}
+
+static uint64_t
+exynos4210_combiner_read(void *opaque, target_phys_addr_t offset, unsigned size)
+{
+ struct Exynos4210CombinerState *s =
+ (struct Exynos4210CombinerState *)opaque;
+ uint32_t req_quad_base_n; /* Base of registers quad. Multiply it by 4 and
+ get a start of corresponding group quad */
+ uint32_t grp_quad_base_n; /* Base of group quad */
+ uint32_t reg_n; /* Register number inside the quad */
+ uint32_t val;
+
+ if (s->external && (offset > 0x3c && offset != 0x100)) {
+ hw_error("exynos4210.combiner: unallowed read access at offset 0x"
+ TARGET_FMT_plx "\n", offset);
+ }
+
+ req_quad_base_n = offset >> 4;
+ grp_quad_base_n = req_quad_base_n << 2;
+ reg_n = (offset - (req_quad_base_n << 4)) >> 2;
+
+ if (req_quad_base_n >= IIC_NGRP) {
+ /* Read of ICIPSR register */
+ return s->icipsr[reg_n];
+ }
+
+ val = 0;
+
+ switch (reg_n) {
+ /* IISTR */
+ case 2:
+ val |= s->group[grp_quad_base_n].src_pending;
+ val |= s->group[grp_quad_base_n + 1].src_pending << 8;
+ val |= s->group[grp_quad_base_n + 2].src_pending << 16;
+ val |= s->group[grp_quad_base_n + 3].src_pending << 24;
+ break;
+ /* IIMSR */
+ case 3:
+ val |= s->group[grp_quad_base_n].src_mask &
+ s->group[grp_quad_base_n].src_pending;
+ val |= (s->group[grp_quad_base_n + 1].src_mask &
+ s->group[grp_quad_base_n + 1].src_pending) << 8;
+ val |= (s->group[grp_quad_base_n + 2].src_mask &
+ s->group[grp_quad_base_n + 2].src_pending) << 16;
+ val |= (s->group[grp_quad_base_n + 3].src_mask &
+ s->group[grp_quad_base_n + 3].src_pending) << 24;
+ break;
+ default:
+ if (offset >> 2 >= IIC_REGSET_SIZE) {
+ hw_error("exynos4210.combiner: overflow of reg_set by 0x"
+ TARGET_FMT_plx "offset\n", offset);
+ }
+ val = s->reg_set[offset >> 2];
+ return 0;
+ }
+ return val;
+}
+
+static void exynos4210_combiner_update(void *opaque, uint8_t group_n)
+{
+ struct Exynos4210CombinerState *s =
+ (struct Exynos4210CombinerState *)opaque;
+
+ /* Send interrupt if needed */
+ if (s->group[group_n].src_mask & s->group[group_n].src_pending) {
+#ifdef DEBUG_COMBINER
+ if (group_n != 26) {
+ /* skip uart */
+ DPRINTF("%s raise IRQ[%d]\n", s->external ? "EXT" : "INT", group_n);
+ }
+#endif
+
+ /* Set Combiner interrupt pending status after masking */
+ if (group_n >= 32) {
+ s->icipsr[1] |= 1 << (group_n - 32);
+ } else {
+ s->icipsr[0] |= 1 << group_n;
+ }
+
+ qemu_irq_raise(s->output_irq[group_n]);
+ } else {
+#ifdef DEBUG_COMBINER
+ if (group_n != 26) {
+ /* skip uart */
+ DPRINTF("%s lower IRQ[%d]\n", s->external ? "EXT" : "INT", group_n);
+ }
+#endif
+
+ /* Set Combiner interrupt pending status after masking */
+ if (group_n >= 32) {
+ s->icipsr[1] &= ~(1 << (group_n - 32));
+ } else {
+ s->icipsr[0] &= ~(1 << group_n);
+ }
+
+ qemu_irq_lower(s->output_irq[group_n]);
+ }
+}
+
+static void exynos4210_combiner_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ struct Exynos4210CombinerState *s =
+ (struct Exynos4210CombinerState *)opaque;
+ uint32_t req_quad_base_n; /* Base of registers quad. Multiply it by 4 and
+ get a start of corresponding group quad */
+ uint32_t grp_quad_base_n; /* Base of group quad */
+ uint32_t reg_n; /* Register number inside the quad */
+
+ if (s->external && (offset > 0x3c && offset != 0x100)) {
+ hw_error("exynos4210.combiner: unallowed write access at offset 0x"
+ TARGET_FMT_plx "\n", offset);
+ }
+
+ req_quad_base_n = offset >> 4;
+ grp_quad_base_n = req_quad_base_n << 2;
+ reg_n = (offset - (req_quad_base_n << 4)) >> 2;
+
+ if (req_quad_base_n >= IIC_NGRP) {
+ hw_error("exynos4210.combiner: unallowed write access at offset 0x"
+ TARGET_FMT_plx "\n", offset);
+ return;
+ }
+
+ if (reg_n > 1) {
+ hw_error("exynos4210.combiner: unallowed write access at offset 0x"
+ TARGET_FMT_plx "\n", offset);
+ return;
+ }
+
+ if (offset >> 2 >= IIC_REGSET_SIZE) {
+ hw_error("exynos4210.combiner: overflow of reg_set by 0x"
+ TARGET_FMT_plx "offset\n", offset);
+ }
+ s->reg_set[offset >> 2] = val;
+
+ switch (reg_n) {
+ /* IIESR */
+ case 0:
+ /* FIXME: what if irq is pending, allowed by mask, and we allow it
+ * again. Interrupt will rise again! */
+
+ DPRINTF("%s enable IRQ for groups %d, %d, %d, %d\n",
+ s->external ? "EXT" : "INT",
+ grp_quad_base_n,
+ grp_quad_base_n + 1,
+ grp_quad_base_n + 2,
+ grp_quad_base_n + 3);
+
+ /* Enable interrupt sources */
+ s->group[grp_quad_base_n].src_mask |= val & 0xFF;
+ s->group[grp_quad_base_n + 1].src_mask |= (val & 0xFF00) >> 8;
+ s->group[grp_quad_base_n + 2].src_mask |= (val & 0xFF0000) >> 16;
+ s->group[grp_quad_base_n + 3].src_mask |= (val & 0xFF000000) >> 24;
+
+ exynos4210_combiner_update(s, grp_quad_base_n);
+ exynos4210_combiner_update(s, grp_quad_base_n + 1);
+ exynos4210_combiner_update(s, grp_quad_base_n + 2);
+ exynos4210_combiner_update(s, grp_quad_base_n + 3);
+ break;
+ /* IIECR */
+ case 1:
+ DPRINTF("%s disable IRQ for groups %d, %d, %d, %d\n",
+ s->external ? "EXT" : "INT",
+ grp_quad_base_n,
+ grp_quad_base_n + 1,
+ grp_quad_base_n + 2,
+ grp_quad_base_n + 3);
+
+ /* Disable interrupt sources */
+ s->group[grp_quad_base_n].src_mask &= ~(val & 0xFF);
+ s->group[grp_quad_base_n + 1].src_mask &= ~((val & 0xFF00) >> 8);
+ s->group[grp_quad_base_n + 2].src_mask &= ~((val & 0xFF0000) >> 16);
+ s->group[grp_quad_base_n + 3].src_mask &= ~((val & 0xFF000000) >> 24);
+
+ exynos4210_combiner_update(s, grp_quad_base_n);
+ exynos4210_combiner_update(s, grp_quad_base_n + 1);
+ exynos4210_combiner_update(s, grp_quad_base_n + 2);
+ exynos4210_combiner_update(s, grp_quad_base_n + 3);
+ break;
+ default:
+ hw_error("exynos4210.combiner: unallowed write access at offset 0x"
+ TARGET_FMT_plx "\n", offset);
+ break;
+ }
+
+ return;
+}
+
+/* Get combiner group and bit from irq number */
+static uint8_t get_combiner_group_and_bit(int irq, uint8_t *bit)
+{
+ *bit = irq - ((irq >> 3) << 3);
+ return irq >> 3;
+}
+
+/* Process a change in an external IRQ input. */
+static void exynos4210_combiner_handler(void *opaque, int irq, int level)
+{
+ struct Exynos4210CombinerState *s =
+ (struct Exynos4210CombinerState *)opaque;
+ uint8_t bit_n, group_n;
+
+ group_n = get_combiner_group_and_bit(irq, &bit_n);
+
+ if (s->external && group_n >= EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ) {
+ DPRINTF("%s unallowed IRQ group 0x%x\n", s->external ? "EXT" : "INT"
+ , group_n);
+ return;
+ }
+
+ if (level) {
+ s->group[group_n].src_pending |= 1 << bit_n;
+ } else {
+ s->group[group_n].src_pending &= ~(1 << bit_n);
+ }
+
+ exynos4210_combiner_update(s, group_n);
+
+ return;
+}
+
+static void exynos4210_combiner_reset(DeviceState *d)
+{
+ struct Exynos4210CombinerState *s = (struct Exynos4210CombinerState *)d;
+
+ memset(&s->group, 0, sizeof(s->group));
+ memset(&s->reg_set, 0, sizeof(s->reg_set));
+
+ s->reg_set[0xC0 >> 2] = 0x01010101;
+ s->reg_set[0xC4 >> 2] = 0x01010101;
+ s->reg_set[0xD0 >> 2] = 0x01010101;
+ s->reg_set[0xD4 >> 2] = 0x01010101;
+}
+
+static const MemoryRegionOps exynos4210_combiner_ops = {
+ .read = exynos4210_combiner_read,
+ .write = exynos4210_combiner_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+/*
+ * Internal Combiner initialization.
+ */
+static int exynos4210_combiner_init(SysBusDevice *dev)
+{
+ unsigned int i;
+ struct Exynos4210CombinerState *s =
+ FROM_SYSBUS(struct Exynos4210CombinerState, dev);
+
+ /* Allocate general purpose input signals and connect a handler to each of
+ * them */
+ qdev_init_gpio_in(&s->busdev.qdev, exynos4210_combiner_handler, IIC_NIRQ);
+
+ /* Connect SysBusDev irqs to device specific irqs */
+ for (i = 0; i < IIC_NIRQ; i++) {
+ sysbus_init_irq(dev, &s->output_irq[i]);
+ }
+
+ memory_region_init_io(&s->iomem, &exynos4210_combiner_ops, s,
+ "exynos4210-combiner", IIC_REGION_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_combiner_info = {
+ .qdev.name = "exynos4210.combiner",
+ .qdev.size = sizeof(struct Exynos4210CombinerState),
+ .qdev.reset = exynos4210_combiner_reset,
+ .qdev.vmsd = &VMState_Exynos4210Combiner,
+ .init = exynos4210_combiner_init,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("external", Exynos4210CombinerState, external, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void exynos4210_combiner_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_combiner_info);
+}
+
+device_init(exynos4210_combiner_register_devices)
diff --git a/hw/exynos4210_gic.c b/hw/exynos4210_gic.c
new file mode 100644
index 0000000..60f650f
--- /dev/null
+++ b/hw/exynos4210_gic.c
@@ -0,0 +1,436 @@
+/*
+ * Samsung exynos4210 GIC implementation. Based on hw/arm_gic.c
+ *
+ * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd.
+ * All rights reserved.
+ *
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "sysbus.h"
+#include "qemu-common.h"
+#include "irq.h"
+#include "exynos4210.h"
+
+#define EXT_GIC_ID_TVENC 127
+#define EXT_GIC_ID_MFC 126
+#define EXT_GIC_ID_HDMI_I2C 125
+#define EXT_GIC_ID_HDMI 124
+#define EXT_GIC_ID_MIXER 123
+#define EXT_GIC_ID_PCIe 122
+#define EXT_GIC_ID_2D 121
+#define EXT_GIC_ID_JPEG 120
+#define EXT_GIC_ID_FIMC3 119
+#define EXT_GIC_ID_FIMC2 118
+#define EXT_GIC_ID_FIMC1 117
+#define EXT_GIC_ID_FIMC0 116
+#define EXT_GIC_ID_ROTATOR 115
+#define EXT_GIC_ID_ONENAND_AUDI 114
+#define EXT_GIC_ID_MIPI_DSI_2LANE 113
+#define EXT_GIC_ID_MIPI_CSI_2LANE 112
+#define EXT_GIC_ID_MIPI_DSI_4LANE 111
+#define EXT_GIC_ID_MIPI_CSI_4LANE 110
+#define EXT_GIC_ID_SDMMC 109
+#define EXT_GIC_ID_HSMMC3 108
+#define EXT_GIC_ID_HSMMC2 107
+#define EXT_GIC_ID_HSMMC1 106
+#define EXT_GIC_ID_HSMMC0 105
+#define EXT_GIC_ID_MODEMIF 104
+#define EXT_GIC_ID_USB_DEVICE 103
+#define EXT_GIC_ID_USB_HOST 102
+#define EXT_GIC_ID_MCT_G1 101
+#define EXT_GIC_ID_SPI2 100
+#define EXT_GIC_ID_SPI1 99
+#define EXT_GIC_ID_SPI0 98
+#define EXT_GIC_ID_I2C7 97
+#define EXT_GIC_ID_I2C6 96
+#define EXT_GIC_ID_I2C5 95
+#define EXT_GIC_ID_I2C4 94
+#define EXT_GIC_ID_I2C3 93
+#define EXT_GIC_ID_I2C2 92
+#define EXT_GIC_ID_I2C1 91
+#define EXT_GIC_ID_I2C0 90
+#define EXT_GIC_ID_MCT_G0 89
+#define EXT_GIC_ID_UART4 88
+#define EXT_GIC_ID_UART3 87
+#define EXT_GIC_ID_UART2 86
+#define EXT_GIC_ID_UART1 85
+#define EXT_GIC_ID_UART0 84
+#define EXT_GIC_ID_NFC 83
+#define EXT_GIC_ID_IEM_IEC 82
+#define EXT_GIC_ID_IEM_APC 81
+#define EXT_GIC_ID_MCT_L1 80
+#define EXT_GIC_ID_GPIO_XA 79
+#define EXT_GIC_ID_GPIO_XB 78
+#define EXT_GIC_ID_RTC_TIC 77
+#define EXT_GIC_ID_RTC_ALARM 76
+#define EXT_GIC_ID_WDT 75
+#define EXT_GIC_ID_MCT_L0 74
+#define EXT_GIC_ID_TIMER4 73
+#define EXT_GIC_ID_TIMER3 72
+#define EXT_GIC_ID_TIMER2 71
+#define EXT_GIC_ID_TIMER1 70
+#define EXT_GIC_ID_TIMER0 69
+#define EXT_GIC_ID_PDMA1 68
+#define EXT_GIC_ID_PDMA0 67
+#define EXT_GIC_ID_MDMA_LCD0 66
+
+enum ext_int {
+ EXT_GIC_ID_EXTINT0 = 48,
+ EXT_GIC_ID_EXTINT1,
+ EXT_GIC_ID_EXTINT2,
+ EXT_GIC_ID_EXTINT3,
+ EXT_GIC_ID_EXTINT4,
+ EXT_GIC_ID_EXTINT5,
+ EXT_GIC_ID_EXTINT6,
+ EXT_GIC_ID_EXTINT7,
+ EXT_GIC_ID_EXTINT8,
+ EXT_GIC_ID_EXTINT9,
+ EXT_GIC_ID_EXTINT10,
+ EXT_GIC_ID_EXTINT11,
+ EXT_GIC_ID_EXTINT12,
+ EXT_GIC_ID_EXTINT13,
+ EXT_GIC_ID_EXTINT14,
+ EXT_GIC_ID_EXTINT15
+};
+
+/*
+ * External GIC sources which are not from External Interrupt Combiner or
+ * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ,
+ * which is INTG16 in Internal Interrupt Combiner.
+ */
+
+static uint32_t
+combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = {
+ /* int combiner groups 16-19 */
+ {}, {}, {}, {},
+ /* int combiner group 20 */
+ {0, EXT_GIC_ID_MDMA_LCD0},
+ /* int combiner group 21 */
+ {EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1},
+ /* int combiner group 22 */
+ {EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2,
+ EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4},
+ /* int combiner group 23 */
+ {EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC},
+ /* int combiner group 24 */
+ {EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA},
+ /* int combiner group 25 */
+ {EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC},
+ /* int combiner group 26 */
+ {EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3,
+ EXT_GIC_ID_UART4},
+ /* int combiner group 27 */
+ {EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3,
+ EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6,
+ EXT_GIC_ID_I2C7},
+ /* int combiner group 28 */
+ {EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2},
+ /* int combiner group 29 */
+ {EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2,
+ EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC},
+ /* int combiner group 30 */
+ {EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE},
+ /* int combiner group 31 */
+ {EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE},
+ /* int combiner group 32 */
+ {EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1},
+ /* int combiner group 33 */
+ {EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3},
+ /* int combiner group 34 */
+ {EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC},
+ /* int combiner group 35 */
+ {0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1},
+ /* int combiner group 36 */
+ {EXT_GIC_ID_MIXER},
+ /* int combiner group 37 */
+ {EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6,
+ EXT_GIC_ID_EXTINT7},
+ /* groups 38-50 */
+ {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {},
+ /* int combiner group 51 */
+ {EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1},
+ /* group 52 */
+ {},
+ /* int combiner group 53 */
+ {EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1},
+ /* groups 54-63 */
+ {}, {}, {}, {}, {}, {}, {}, {}, {}, {}
+};
+
+#define EXYNOS4210_GIC_NIRQ 160
+#define NCPU EXYNOS4210_MAX_CPUS
+
+#define EXYNOS4210_EXT_GIC_CPU_REGION_SIZE 0x10000
+#define EXYNOS4210_EXT_GIC_DIST_REGION_SIZE 0x10000
+
+#define EXYNOS4210_EXT_GIC_PER_CPU_OFFSET 0x8000
+#define EXYNOS4210_EXT_GIC_CPU_GET_OFFSET(n) \
+ ((n) * EXYNOS4210_EXT_GIC_PER_CPU_OFFSET)
+#define EXYNOS4210_EXT_GIC_DIST_GET_OFFSET(n) \
+ ((n) * EXYNOS4210_EXT_GIC_PER_CPU_OFFSET)
+
+#define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100
+#define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000
+
+static void exynos4210_irq_handler(void *opaque, int irq, int level)
+{
+ Exynos4210Irq *s = (Exynos4210Irq *)opaque;
+
+ /* Bypass */
+ qemu_set_irq(s->board_irqs[irq], level);
+
+ return;
+}
+
+/*
+ * Initialize exynos4210 IRQ subsystem stub.
+ */
+qemu_irq *exynos4210_init_irq(Exynos4210Irq *s)
+{
+ return qemu_allocate_irqs(exynos4210_irq_handler, s,
+ EXYNOS4210_MAX_INT_COMBINER_IN_IRQ);
+}
+
+/*
+ * Initialize board IRQs.
+ * These IRQs contain splitted Int/External Combiner and External Gic IRQs.
+ */
+void exynos4210_init_board_irqs(Exynos4210Irq *s)
+{
+ uint32_t grp, bit, irq_id, n;
+
+ for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) {
+ s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n],
+ s->ext_combiner_irq[n]);
+
+ irq_id = 0;
+ if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) ||
+ n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) {
+ /* MCT_G0 is passed to External GIC */
+ irq_id = EXT_GIC_ID_MCT_G0;
+ }
+ if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) ||
+ n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) {
+ /* MCT_G1 is passed to External and GIC */
+ irq_id = EXT_GIC_ID_MCT_G1;
+ }
+ if (irq_id) {
+ s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n],
+ s->ext_gic_irq[irq_id-32]);
+ }
+
+ }
+ for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) {
+ /* these IDs are passed to Internal Combiner and External GIC */
+ grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n);
+ bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n);
+ irq_id = combiner_grp_to_gic_id[grp -
+ EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit];
+
+ if (irq_id) {
+ s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n],
+ s->ext_gic_irq[irq_id-32]);
+ }
+ }
+}
+
+/*
+ * Get IRQ number from exynos4210 IRQ subsystem stub.
+ * To identify IRQ source use internal combiner group and bit number
+ * grp - group number
+ * bit - bit number inside group
+ */
+uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit)
+{
+ return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit);
+}
+
+/********* GIC part *********/
+
+static inline int
+gic_get_current_cpu(void)
+{
+ return cpu_single_env->cpu_index;
+}
+
+#include "arm_gic.c"
+
+typedef struct {
+ gic_state gic;
+ MemoryRegion cpu_container;
+ MemoryRegion dist_container;
+ MemoryRegion cpu_alias[NCPU];
+ MemoryRegion dist_alias[NCPU];
+ uint32_t num_cpu;
+} Exynos4210GicState;
+
+static int exynos4210_gic_init(SysBusDevice *dev)
+{
+ Exynos4210GicState *s = FROM_SYSBUSGIC(Exynos4210GicState, dev);
+ uint32_t i;
+ const char cpu_prefix[] = "exynos4210-gic-alias_cpu";
+ const char dist_prefix[] = "exynos4210-gic-alias_dist";
+ char cpu_alias_name[sizeof(cpu_prefix) + 3];
+ char dist_alias_name[sizeof(cpu_prefix) + 3];
+
+ gic_init(&s->gic, s->num_cpu, EXYNOS4210_GIC_NIRQ);
+
+ memory_region_init(&s->cpu_container, "exynos4210-cpu-container",
+ EXYNOS4210_EXT_GIC_CPU_REGION_SIZE);
+ memory_region_init(&s->dist_container, "exynos4210-dist-container",
+ EXYNOS4210_EXT_GIC_DIST_REGION_SIZE);
+
+ for (i = 0; i < s->num_cpu; i++) {
+ /* Map CPU interface per SMP Core */
+ sprintf(cpu_alias_name, "%s%x", cpu_prefix, i);
+ memory_region_init_alias(&s->cpu_alias[i],
+ cpu_alias_name,
+ &s->gic.cpuiomem[0],
+ 0,
+ EXYNOS4210_GIC_CPU_REGION_SIZE);
+ memory_region_add_subregion(&s->cpu_container,
+ EXYNOS4210_EXT_GIC_CPU_GET_OFFSET(i), &s->cpu_alias[i]);
+
+ /* Map Distributor per SMP Core */
+ sprintf(dist_alias_name, "%s%x", dist_prefix, i);
+ memory_region_init_alias(&s->dist_alias[i],
+ dist_alias_name,
+ &s->gic.iomem,
+ 0,
+ EXYNOS4210_GIC_DIST_REGION_SIZE);
+ memory_region_add_subregion(&s->dist_container,
+ EXYNOS4210_EXT_GIC_DIST_GET_OFFSET(i), &s->dist_alias[i]);
+ }
+
+ sysbus_init_mmio(dev, &s->cpu_container);
+ sysbus_init_mmio(dev, &s->dist_container);
+
+ gic_cpu_write(&s->gic, 1, 0, 1);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_gic_info = {
+ .init = exynos4210_gic_init,
+ .qdev.name = "exynos4210.gic",
+ .qdev.size = sizeof(Exynos4210GicState),
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("num-cpu", Exynos4210GicState, num_cpu, 1),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void exynos4210_gic_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_gic_info);
+}
+
+device_init(exynos4210_gic_register_devices)
+
+/*
+ * IRQGate struct.
+ * IRQ Gate represents OR gate between GICs to pass IRQ to PIC.
+ */
+typedef struct {
+ SysBusDevice busdev;
+
+ qemu_irq pic_irq[NCPU]; /* output IRQs to PICs */
+ uint32_t gpio_level[EXYNOS4210_IRQ_GATE_NINPUTS]; /* Input levels */
+} Exynos4210IRQGateState;
+
+static const VMStateDescription VMState_Exynos4210IRQGate = {
+ .name = "exynos4210.irq_gate",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(gpio_level, Exynos4210IRQGateState,
+ EXYNOS4210_IRQ_GATE_NINPUTS),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/* Process a change in an external IRQ input. */
+static void exynos4210_irq_gate_handler(void *opaque, int irq, int level)
+{
+ Exynos4210IRQGateState *s =
+ (Exynos4210IRQGateState *)opaque;
+ uint32_t odd, even;
+
+ if (irq & 1) {
+ odd = irq;
+ even = irq & ~1;
+ } else {
+ even = irq;
+ odd = irq | 1;
+ }
+
+ assert(irq < EXYNOS4210_IRQ_GATE_NINPUTS);
+ s->gpio_level[irq] = level;
+
+ if (s->gpio_level[odd] >= 1 || s->gpio_level[even] >= 1) {
+ qemu_irq_raise(s->pic_irq[even >> 1]);
+ } else {
+ qemu_irq_lower(s->pic_irq[even >> 1]);
+ }
+
+ return;
+}
+
+static void exynos4210_irq_gate_reset(DeviceState *d)
+{
+ Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)d;
+
+ memset(&s->gpio_level, 0, sizeof(s->gpio_level));
+}
+
+/*
+ * IRQ Gate initialization.
+ */
+static int exynos4210_irq_gate_init(SysBusDevice *dev)
+{
+ unsigned int i;
+ Exynos4210IRQGateState *s =
+ FROM_SYSBUS(Exynos4210IRQGateState, dev);
+
+ /* Allocate general purpose input signals and connect a handler to each of
+ * them */
+ qdev_init_gpio_in(&s->busdev.qdev, exynos4210_irq_gate_handler,
+ EXYNOS4210_IRQ_GATE_NINPUTS);
+
+ /* Connect SysBusDev irqs to device specific irqs */
+ for (i = 0; i < NCPU; i++) {
+ sysbus_init_irq(dev, &s->pic_irq[i]);
+ }
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_irq_gate_info = {
+ .qdev.name = "exynos4210.irq_gate",
+ .qdev.size = sizeof(Exynos4210IRQGateState),
+ .qdev.reset = exynos4210_irq_gate_reset,
+ .qdev.vmsd = &VMState_Exynos4210IRQGate,
+ .init = exynos4210_irq_gate_init,
+};
+
+static void exynos4210_irq_gate_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_irq_gate_info);
+}
+
+device_init(exynos4210_irq_gate_register_devices)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 2/9] ARM: Samsung exynos4210-based boards emulation
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 1/9] ARM: exynos4210: IRQ subsystem support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 3/9] ARM: exynos4210: UART support Evgeny Voevodin
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
Add initial support of NURI and SMDKC210 boards
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
Makefile.target | 3 +-
hw/exynos4210.c | 193 +++++++++++++++++++++++++++++++++++++++++++++++++++
hw/exynos4210.h | 40 +++++++++++
hw/exynos4_boards.c | 143 +++++++++++++++++++++++++++++++++++++
4 files changed, 378 insertions(+), 1 deletions(-)
create mode 100644 hw/exynos4210.c
create mode 100644 hw/exynos4_boards.c
diff --git a/Makefile.target b/Makefile.target
index 4ac257e..6199d44 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -339,7 +339,8 @@ obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
-obj-arm-y += exynos4210_gic.o exynos4210_combiner.o
+obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
+obj-arm-y += exynos4_boards.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
new file mode 100644
index 0000000..aff0081
--- /dev/null
+++ b/hw/exynos4210.c
@@ -0,0 +1,193 @@
+/*
+ * Samsung exynos4210 SoC emulation
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
+ * Maksim Kozlov <m.kozlov@samsung.com>
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ * Igor Mitsyanko <i.mitsyanko@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "boards.h"
+#include "sysemu.h"
+#include "sysbus.h"
+#include "arm-misc.h"
+#include "exynos4210.h"
+
+#define EXYNOS4210_CHIPID_ADDR 0x10000000
+
+/* External GIC */
+#define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000
+#define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000
+
+/* Combiner */
+#define EXYNOS4210_EXT_COMBINER_BASE_ADDR 0x10440000
+#define EXYNOS4210_INT_COMBINER_BASE_ADDR 0x10448000
+
+static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
+ 0x09, 0x00, 0x00, 0x00 };
+
+Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
+ unsigned long ram_size)
+{
+ qemu_irq cpu_irq[4];
+ int n;
+ Exynos4210State *s = g_new(Exynos4210State, 1);
+ qemu_irq *irq_table;
+ qemu_irq *irqp;
+ qemu_irq gate_irq[EXYNOS4210_IRQ_GATE_NINPUTS];
+ unsigned long mem_size;
+ DeviceState *dev;
+ SysBusDevice *busdev;
+
+ for (n = 0; n < smp_cpus; n++) {
+ s->env[n] = cpu_init("cortex-a9");
+ if (!s->env[n]) {
+ fprintf(stderr, "Unable to find CPU %d definition\n", n);
+ exit(1);
+ }
+ /* Create PIC controller for each processor instance */
+ irqp = arm_pic_init_cpu(s->env[n]);
+
+ /*
+ * Get GICs gpio_in cpu_irq to connect a combiner to them later.
+ * Use only IRQ for a while.
+ */
+ cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
+ }
+
+ /*** IRQs ***/
+
+ s->irq_table = exynos4210_init_irq(&s->irqs);
+ irq_table = s->irq_table;
+
+ /* IRQ Gate */
+ dev = qdev_create(NULL, "exynos4210.irq_gate");
+ qdev_init_nofail(dev);
+ /* Get IRQ Gate input in gate_irq */
+ for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
+ gate_irq[n] = qdev_get_gpio_in(dev, n);
+ }
+ busdev = sysbus_from_qdev(dev);
+ /* Connect IRQ Gate output to cpu_irq */
+ for (n = 0; n < smp_cpus; n++) {
+ sysbus_connect_irq(busdev, n, cpu_irq[n]);
+ }
+
+ /* Private memory region and Internal GIC */
+ dev = qdev_create(NULL, "a9mpcore_priv");
+ qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
+ for (n = 0; n < smp_cpus; n++) {
+ sysbus_connect_irq(busdev, n, gate_irq[n * 2]);
+ }
+ for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
+ s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
+ }
+
+ /* Cache controller */
+ sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
+
+ /* External GIC */
+ dev = qdev_create(NULL, "exynos4210.gic");
+ qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ /* Map CPU interface */
+ sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
+ /* Map Distributer interface */
+ sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
+ for (n = 0; n < smp_cpus; n++) {
+ sysbus_connect_irq(busdev, n, gate_irq[n * 2 + 1]);
+ }
+ for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
+ s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
+ }
+
+ /* Internal Interrupt Combiner */
+ dev = qdev_create(NULL, "exynos4210.combiner");
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
+ sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
+ }
+ exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
+ sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
+
+ /* External Interrupt Combiner */
+ dev = qdev_create(NULL, "exynos4210.combiner");
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
+ sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
+ }
+ exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
+ sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
+ qdev_prop_set_uint32(dev, "external", 1);
+
+ /* Initialize board IRQs. */
+ exynos4210_init_board_irqs(&s->irqs);
+
+ /*** Memory ***/
+
+ /* Chip-ID and OMR */
+ memory_region_init_ram_ptr(&s->chipid_mem, "exynos4210.chipid",
+ sizeof(chipid_and_omr), chipid_and_omr);
+ memory_region_set_readonly(&s->chipid_mem, true);
+ memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
+ &s->chipid_mem);
+
+ /* Internal ROM */
+ memory_region_init_ram(&s->irom_mem, "exynos4210.irom",
+ EXYNOS4210_IROM_SIZE);
+ memory_region_set_readonly(&s->irom_mem, true);
+ memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
+ &s->irom_mem);
+ /* mirror of iROM */
+ memory_region_init_alias(&s->irom_alias_mem, "exynos4210.irom_alias",
+ &s->irom_mem,
+ EXYNOS4210_IROM_BASE_ADDR,
+ EXYNOS4210_IROM_SIZE);
+ memory_region_set_readonly(&s->irom_alias_mem, true);
+ memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
+ &s->irom_alias_mem);
+
+ /* Internal RAM */
+ memory_region_init_ram(&s->iram_mem, "exynos4210.iram",
+ EXYNOS4210_IRAM_SIZE);
+ vmstate_register_ram_global(&s->iram_mem);
+ memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
+ &s->iram_mem);
+
+ /* DRAM */
+ mem_size = ram_size;
+ if (mem_size > EXYNOS4210_DRAM_MAX_SIZE) {
+ memory_region_init_ram(&s->dram1_mem, "exynos4210.dram1",
+ mem_size - EXYNOS4210_DRAM_MAX_SIZE);
+ vmstate_register_ram_global(&s->dram1_mem);
+ memory_region_add_subregion(system_mem, EXYNOS4210_DRAM1_BASE_ADDR,
+ &s->dram1_mem);
+ mem_size = EXYNOS4210_DRAM_MAX_SIZE;
+ }
+ memory_region_init_ram(&s->dram0_mem, "exynos4210.dram0", mem_size);
+ vmstate_register_ram_global(&s->dram0_mem);
+ memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
+ &s->dram0_mem);
+
+ return s;
+}
diff --git a/hw/exynos4210.h b/hw/exynos4210.h
index cef264b..621e75a 100644
--- a/hw/exynos4210.h
+++ b/hw/exynos4210.h
@@ -31,6 +31,28 @@
#define EXYNOS4210_MAX_CPUS 2
+#define EXYNOS4210_DRAM0_BASE_ADDR 0x40000000
+#define EXYNOS4210_DRAM1_BASE_ADDR 0xa0000000
+#define EXYNOS4210_DRAM_MAX_SIZE 0x60000000 /* 1.5 GB */
+
+#define EXYNOS4210_IROM_BASE_ADDR 0x00000000
+#define EXYNOS4210_IROM_SIZE 0x00010000 /* 64 KB */
+#define EXYNOS4210_IROM_MIRROR_BASE_ADDR 0x02000000
+#define EXYNOS4210_IROM_MIRROR_SIZE 0x00010000 /* 64 KB */
+
+#define EXYNOS4210_IRAM_BASE_ADDR 0x02020000
+#define EXYNOS4210_IRAM_SIZE 0x00020000 /* 128 KB */
+
+/* Secondary CPU startup code is in IROM memory */
+#define EXYNOS4210_SMP_BOOT_ADDR EXYNOS4210_IROM_BASE_ADDR
+#define EXYNOS4210_SMP_BOOT_SIZE 0x1000
+#define EXYNOS4210_BASE_BOOT_ADDR EXYNOS4210_DRAM0_BASE_ADDR
+/* Secondary CPU polling address to get loader start from */
+#define EXYNOS4210_SECOND_CPU_BOOTREG 0x10020814
+
+#define EXYNOS4210_SMP_PRIVATE_BASE_ADDR 0x10500000
+#define EXYNOS4210_L2X0_BASE_ADDR 0x10502000
+
/*
* exynos4210 IRQ subsystem stub definitions.
*/
@@ -60,6 +82,24 @@ typedef struct Exynos4210Irq {
qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ];
} Exynos4210Irq;
+typedef struct Exynos4210State {
+ CPUState * env[EXYNOS4210_MAX_CPUS];
+ Exynos4210Irq irqs;
+ qemu_irq *irq_table;
+
+ MemoryRegion chipid_mem;
+ MemoryRegion iram_mem;
+ MemoryRegion irom_mem;
+ MemoryRegion irom_alias_mem;
+ MemoryRegion dram0_mem;
+ MemoryRegion dram1_mem;
+ MemoryRegion boot_secondary;
+ MemoryRegion bootreg_mem;
+} Exynos4210State;
+
+Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
+ unsigned long ram_size);
+
/* Initialize exynos4210 IRQ subsystem stub */
qemu_irq *exynos4210_init_irq(Exynos4210Irq *env);
diff --git a/hw/exynos4_boards.c b/hw/exynos4_boards.c
new file mode 100644
index 0000000..55fca06
--- /dev/null
+++ b/hw/exynos4_boards.c
@@ -0,0 +1,143 @@
+/*
+ * Samsung exynos4 SoC based boards emulation
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
+ * Maksim Kozlov <m.kozlov@samsung.com>
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ * Igor Mitsyanko <i.mitsyanko@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysemu.h"
+#include "sysbus.h"
+#include "arm-misc.h"
+#include "exec-memory.h"
+#include "exynos4210.h"
+#include "boards.h"
+
+#undef DEBUG
+
+//#define DEBUG
+
+#ifdef DEBUG
+ #undef PRINT_DEBUG
+ #define PRINT_DEBUG(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+#else
+ #define PRINT_DEBUG(fmt, args...) do {} while (0)
+#endif
+
+typedef enum Exynos4BoardType {
+ EXYNOS4_BOARD_NURI,
+ EXYNOS4_BOARD_SMDKC210,
+ EXYNOS4_NUM_OF_BOARDS
+} Exynos4BoardType;
+
+static int exynos4_board_id[EXYNOS4_NUM_OF_BOARDS] = {
+ [EXYNOS4_BOARD_NURI] = 0xD33,
+ [EXYNOS4_BOARD_SMDKC210] = 0xB16,
+};
+
+static int exynos4_board_smp_bootreg_addr[EXYNOS4_NUM_OF_BOARDS] = {
+ [EXYNOS4_BOARD_NURI] = EXYNOS4210_SECOND_CPU_BOOTREG,
+ [EXYNOS4_BOARD_SMDKC210] = EXYNOS4210_SECOND_CPU_BOOTREG,
+};
+
+static unsigned long exynos4_board_ram_size[EXYNOS4_NUM_OF_BOARDS] = {
+ [EXYNOS4_BOARD_NURI] = 0x40000000,
+ [EXYNOS4_BOARD_SMDKC210] = 0x40000000,
+};
+
+static struct arm_boot_info exynos4_board_binfo = {
+ .loader_start = EXYNOS4210_BASE_BOOT_ADDR,
+ .smp_loader_start = EXYNOS4210_SMP_BOOT_ADDR,
+};
+
+static Exynos4210State *exynos4_boards_init_common(
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ Exynos4BoardType board_type)
+{
+ exynos4_board_binfo.ram_size = exynos4_board_ram_size[board_type];
+ exynos4_board_binfo.board_id = exynos4_board_id[board_type];
+ exynos4_board_binfo.smp_bootreg_addr =
+ exynos4_board_smp_bootreg_addr[board_type];
+ exynos4_board_binfo.nb_cpus = smp_cpus;
+ exynos4_board_binfo.kernel_filename = kernel_filename;
+ exynos4_board_binfo.initrd_filename = initrd_filename;
+ exynos4_board_binfo.kernel_cmdline = kernel_cmdline;
+ exynos4_board_binfo.smp_priv_base = EXYNOS4210_SMP_PRIVATE_BASE_ADDR;
+
+ PRINT_DEBUG("\n ram_size: %luMiB [0x%08lx]\n"
+ " kernel_filename: %s\n"
+ " kernel_cmdline: %s\n"
+ " initrd_filename: %s\n",
+ exynos4_board_ram_size[board_type] / 1048576,
+ exynos4_board_ram_size[board_type],
+ kernel_filename,
+ kernel_cmdline,
+ initrd_filename);
+
+ return exynos4210_init(get_system_memory(),
+ exynos4_board_ram_size[board_type]);
+}
+
+static void nuri_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ exynos4_boards_init_common(kernel_filename, kernel_cmdline,
+ initrd_filename, EXYNOS4_BOARD_NURI);
+
+ arm_load_kernel(first_cpu, &exynos4_board_binfo);
+}
+
+static void smdkc210_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ exynos4_boards_init_common(kernel_filename, kernel_cmdline,
+ initrd_filename, EXYNOS4_BOARD_SMDKC210);
+
+ arm_load_kernel(first_cpu, &exynos4_board_binfo);
+}
+
+static QEMUMachine nuri_machine = {
+ .name = "nuri",
+ .desc = "Samsung NURI board (Exynos4210)",
+ .init = nuri_init,
+ .max_cpus = EXYNOS4210_MAX_CPUS,
+};
+
+static QEMUMachine smdkc210_machine = {
+ .name = "smdkc210",
+ .desc = "Samsung SMDKC210 board (Exynos4210)",
+ .init = smdkc210_init,
+ .max_cpus = EXYNOS4210_MAX_CPUS,
+};
+
+static void exynos4_machine_init(void)
+{
+ qemu_register_machine(&nuri_machine);
+ qemu_register_machine(&smdkc210_machine);
+}
+
+machine_init(exynos4_machine_init);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 3/9] ARM: exynos4210: UART support
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 1/9] ARM: exynos4210: IRQ subsystem support Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 2/9] ARM: Samsung exynos4210-based boards emulation Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 4/9] ARM: exynos4210: PWM support Evgeny Voevodin
` (5 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
From: Maksim Kozlov <m.kozlov@samsung.com>
Add basic support of exynos4210 UART
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
Makefile.target | 2 +-
hw/exynos4210.c | 29 +++
hw/exynos4210.h | 9 +
hw/exynos4210_uart.c | 661 ++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 700 insertions(+), 1 deletions(-)
create mode 100644 hw/exynos4210_uart.c
diff --git a/Makefile.target b/Makefile.target
index 6199d44..c856de3 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -340,7 +340,7 @@ obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
-obj-arm-y += exynos4_boards.o
+obj-arm-y += exynos4_boards.o exynos4210_uart.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index aff0081..3838b96 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -29,6 +29,18 @@
#define EXYNOS4210_CHIPID_ADDR 0x10000000
+/* UART's definitions */
+#define EXYNOS4210_UART0_BASE_ADDR 0x13800000
+#define EXYNOS4210_UART1_BASE_ADDR 0x13810000
+#define EXYNOS4210_UART2_BASE_ADDR 0x13820000
+#define EXYNOS4210_UART3_BASE_ADDR 0x13830000
+#define EXYNOS4210_UART0_FIFO_SIZE 256
+#define EXYNOS4210_UART1_FIFO_SIZE 64
+#define EXYNOS4210_UART2_FIFO_SIZE 16
+#define EXYNOS4210_UART3_FIFO_SIZE 16
+/* Interrupt Group of External Interrupt Combiner for UART */
+#define EXYNOS4210_UART_INT_GRP 26
+
/* External GIC */
#define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000
#define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000
@@ -189,5 +201,22 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
+ /*** UARTs ***/
+ exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
+ EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
+ irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
+ EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
+ irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
+ EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
+ irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
+
+ exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
+ EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
+ irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
+
return s;
}
diff --git a/hw/exynos4210.h b/hw/exynos4210.h
index 621e75a..11368e8 100644
--- a/hw/exynos4210.h
+++ b/hw/exynos4210.h
@@ -119,4 +119,13 @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit);
void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev,
int ext);
+/*
+ * exynos4210 UART
+ */
+DeviceState *exynos4210_uart_create(target_phys_addr_t addr,
+ int fifo_size,
+ int channel,
+ CharDriverState *chr,
+ qemu_irq irq);
+
#endif /* EXYNOS4210_H_ */
diff --git a/hw/exynos4210_uart.c b/hw/exynos4210_uart.c
new file mode 100644
index 0000000..01ccf5a
--- /dev/null
+++ b/hw/exynos4210_uart.c
@@ -0,0 +1,661 @@
+/*
+ * Exynos4210 UART Emulation
+ *
+ * Copyright (C) 2011 Samsung Electronics Co Ltd.
+ * Maksim Kozlov, <m.kozlov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "sysbus.h"
+#include "sysemu.h"
+#include "qemu-char.h"
+
+#include "exynos4210.h"
+
+#undef DEBUG_UART
+#undef DEBUG_UART_EXTEND
+#undef DEBUG_IRQ
+#undef DEBUG_Rx_DATA
+#undef DEBUG_Tx_DATA
+
+#define DEBUG_UART 0
+#define DEBUG_UART_EXTEND 0
+#define DEBUG_IRQ 0
+#define DEBUG_Rx_DATA 0
+#define DEBUG_Tx_DATA 0
+
+#if DEBUG_UART
+#define PRINT_DEBUG(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+#if DEBUG_UART_EXTEND
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+#else
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do {} while (0)
+#endif /* EXTEND */
+
+#else
+#define PRINT_DEBUG(fmt, args...) \
+ do {} while (0)
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do {} while (0)
+#endif
+
+#define PRINT_ERROR(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+/*
+ * Offsets for UART registers relative to SFR base address
+ * for UARTn
+ *
+ */
+#define ULCON 0x0000 /* Line Control */
+#define UCON 0x0004 /* Control */
+#define UFCON 0x0008 /* FIFO Control */
+#define UMCON 0x000C /* Modem Control */
+#define UTRSTAT 0x0010 /* Tx/Rx Status */
+#define UERSTAT 0x0014 /* UART Error Status */
+#define UFSTAT 0x0018 /* FIFO Status */
+#define UMSTAT 0x001C /* Modem Status */
+#define UTXH 0x0020 /* Transmit Buffer */
+#define URXH 0x0024 /* Receive Buffer */
+#define UBRDIV 0x0028 /* Baud Rate Divisor */
+#define UFRACVAL 0x002C /* Divisor Fractional Value */
+#define UINTP 0x0030 /* Interrupt Pending */
+#define UINTSP 0x0034 /* Interrupt Source Pending */
+#define UINTM 0x0038 /* Interrupt Mask */
+
+/*
+ * for indexing register in the uint32_t array
+ *
+ * 'reg' - register offset (see offsets definitions above)
+ *
+ */
+#define I_(reg) (reg / sizeof(uint32_t))
+
+typedef struct Exynos4210UartReg {
+ const char *name; /* the only reason is the debug output */
+ target_phys_addr_t offset;
+ uint32_t reset_value;
+} Exynos4210UartReg;
+
+static Exynos4210UartReg exynos4210_uart_regs[] = {
+ {"ULCON", ULCON, 0x00000000},
+ {"UCON", UCON, 0x00003000},
+ {"UFCON", UFCON, 0x00000000},
+ {"UMCON", UMCON, 0x00000000},
+ {"UTRSTAT", UTRSTAT, 0x00000006}, /* RO */
+ {"UERSTAT", UERSTAT, 0x00000000}, /* RO */
+ {"UFSTAT", UFSTAT, 0x00000000}, /* RO */
+ {"UMSTAT", UMSTAT, 0x00000000}, /* RO */
+ {"UTXH", UTXH, 0x5c5c5c5c}, /* WO, undefined reset value*/
+ {"URXH", URXH, 0x00000000}, /* RO */
+ {"UBRDIV", UBRDIV, 0x00000000},
+ {"UFRACVAL", UFRACVAL, 0x00000000},
+ {"UINTP", UINTP, 0x00000000},
+ {"UINTSP", UINTSP, 0x00000000},
+ {"UINTM", UINTM, 0x00000000},
+};
+
+#define EXYNOS4210_UART_REGS_MEM_SIZE 0x3C
+
+/* UART FIFO Control */
+#define UFCON_FIFO_ENABLE 0x1
+#define UFCON_Rx_FIFO_RESET 0x2
+#define UFCON_Tx_FIFO_RESET 0x4
+#define UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT 8
+#define UFCON_Tx_FIFO_TRIGGER_LEVEL (7 << UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT)
+#define UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT 4
+#define UFCON_Rx_FIFO_TRIGGER_LEVEL (7 << UFCON_Rx_FIFO_TRIGGER_LEVEL_SHIFT)
+
+/* Uart FIFO Status */
+#define UFSTAT_Rx_FIFO_COUNT 0xff
+#define UFSTAT_Rx_FIFO_FULL 0x100
+#define UFSTAT_Rx_FIFO_ERROR 0x200
+#define UFSTAT_Tx_FIFO_COUNT_SHIFT 16
+#define UFSTAT_Tx_FIFO_COUNT (0xff << UFSTAT_Tx_FIFO_COUNT_SHIFT)
+#define UFSTAT_Tx_FIFO_FULL_SHIFT 24
+#define UFSTAT_Tx_FIFO_FULL (1 << UFSTAT_Tx_FIFO_FULL_SHIFT)
+
+/* UART Interrupt Source Pending */
+#define UINTSP_RXD 0x1 /* Receive interrupt */
+#define UINTSP_ERROR 0x2 /* Error interrupt */
+#define UINTSP_TXD 0x4 /* Transmit interrupt */
+#define UINTSP_MODEM 0x8 /* Modem interrupt */
+
+/* UART Line Control */
+#define ULCON_IR_MODE_SHIFT 6
+#define ULCON_PARITY_SHIFT 3
+#define ULCON_STOP_BIT_SHIFT 1
+
+/* UART Tx/Rx Status */
+#define UTRSTAT_TRANSMITTER_EMPTY 0x4
+#define UTRSTAT_Tx_BUFFER_EMPTY 0x2
+#define UTRSTAT_Rx_BUFFER_DATA_READY 0x1
+
+/* UART Error Status */
+#define UERSTAT_OVERRUN 0x1
+#define UERSTAT_PARITY 0x2
+#define UERSTAT_FRAME 0x4
+#define UERSTAT_BREAK 0x8
+
+typedef struct {
+ uint8_t *data;
+ uint32_t sp, rp; /* store and retrieve pointers */
+ uint32_t size;
+} Exynos4210UartFIFO;
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t reg[EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)];
+ Exynos4210UartFIFO rx;
+ Exynos4210UartFIFO tx;
+
+ CharDriverState *chr;
+ qemu_irq irq;
+
+ uint32_t channel;
+
+} Exynos4210UartState;
+
+
+#if DEBUG_UART
+/* Used only for debugging inside PRINT_DEBUG_... macros */
+static const char *exynos4210_uart_regname(target_phys_addr_t offset)
+{
+
+ int regs_number = sizeof(exynos4210_uart_regs) / sizeof(Exynos4210UartReg);
+ int i;
+
+ for (i = 0; i < regs_number; i++) {
+ if (offset == exynos4210_uart_regs[i].offset) {
+ return exynos4210_uart_regs[i].name;
+ }
+ }
+
+ return NULL;
+}
+#endif
+
+
+static void fifo_store(Exynos4210UartFIFO *q, uint8_t ch)
+{
+ q->data[q->sp] = ch;
+ q->sp = (q->sp + 1) % q->size;
+}
+
+static uint8_t fifo_retrieve(Exynos4210UartFIFO *q)
+{
+ uint8_t ret = q->data[q->rp];
+ q->rp = (q->rp + 1) % q->size;
+ return ret;
+}
+
+static int fifo_elements_number(Exynos4210UartFIFO *q)
+{
+ if (q->sp < q->rp) {
+ return q->size - q->rp + q->sp;
+ }
+
+ return q->sp - q->rp;
+}
+
+static int fifo_empty_elements_number(Exynos4210UartFIFO *q)
+{
+ return q->size - fifo_elements_number(q);
+}
+
+static void fifo_reset(Exynos4210UartFIFO *q)
+{
+ if (q->data != NULL) {
+ g_free(q->data);
+ q->data = NULL;
+ }
+
+ q->data = (uint8_t *)g_malloc0(q->size);
+
+ q->sp = 0;
+ q->rp = 0;
+}
+
+static uint32_t exynos4210_uart_Tx_FIFO_trigger_level(Exynos4210UartState *s)
+{
+ uint32_t level = 0;
+ uint32_t reg;
+
+ reg = (s->reg[I_(UFCON)] && UFCON_Tx_FIFO_TRIGGER_LEVEL) >>
+ UFCON_Tx_FIFO_TRIGGER_LEVEL_SHIFT;
+
+ switch (s->channel) {
+ case 0:
+ level = reg * 32;
+ break;
+ case 1:
+ case 4:
+ level = reg * 8;
+ break;
+ case 2:
+ case 3:
+ level = reg * 2;
+ break;
+ default:
+ level = 0;
+ PRINT_ERROR("Wrong UART channel number: %d\n", s->channel);
+ }
+
+ return level;
+}
+
+static void exynos4210_uart_update_irq(Exynos4210UartState *s)
+{
+ /*
+ * The Tx interrupt is always requested if the number of data in the
+ * transmit FIFO is smaller than the trigger level.
+ */
+ if (s->reg[I_(UFCON)] && UFCON_FIFO_ENABLE) {
+
+ uint32_t count = (s->reg[I_(UFSTAT)] && UFSTAT_Tx_FIFO_COUNT) >>
+ UFSTAT_Tx_FIFO_COUNT_SHIFT;
+
+ if (count <= exynos4210_uart_Tx_FIFO_trigger_level(s)) {
+ s->reg[I_(UINTSP)] |= UINTSP_TXD;
+ }
+ }
+
+ s->reg[I_(UINTP)] = s->reg[I_(UINTSP)] & ~s->reg[I_(UINTM)];
+
+ if (s->reg[I_(UINTP)]) {
+ qemu_irq_raise(s->irq);
+
+#if DEBUG_IRQ
+ fprintf(stderr, "UART%d: IRQ has been raised: %08x\n",
+ s->channel, s->reg[I_(UINTP)]);
+#endif
+
+ } else {
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static void exynos4210_uart_update_parameters(Exynos4210UartState *s)
+{
+ int speed, parity, data_bits, stop_bits, frame_size;
+ QEMUSerialSetParams ssp;
+ uint64_t uclk_rate;
+
+ if (s->reg[I_(UBRDIV)] == 0) {
+ return;
+ }
+
+ frame_size = 1; /* start bit */
+ if (s->reg[I_(ULCON)] & 0x20) {
+ frame_size++; /* parity bit */
+ if (s->reg[I_(ULCON)] & 0x28) {
+ parity = 'E';
+ } else {
+ parity = 'O';
+ }
+ } else {
+ parity = 'N';
+ }
+
+ if (s->reg[I_(ULCON)] & 0x4) {
+ stop_bits = 2;
+ } else {
+ stop_bits = 1;
+ }
+
+ data_bits = (s->reg[I_(ULCON)] & 0x3) + 5;
+
+ frame_size += data_bits + stop_bits;
+
+ uclk_rate = 24000000;
+
+ speed = uclk_rate / ((16 * (s->reg[I_(UBRDIV)]) & 0xffff) +
+ (s->reg[I_(UFRACVAL)] & 0x7) + 16);
+
+ ssp.speed = speed;
+ ssp.parity = parity;
+ ssp.data_bits = data_bits;
+ ssp.stop_bits = stop_bits;
+
+ qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
+
+ PRINT_DEBUG("UART%d: speed: %d, parity: %c, data: %d, stop: %d\n",
+ s->channel, speed, parity, data_bits, stop_bits);
+}
+
+static void exynos4210_uart_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ uint8_t ch;
+
+ PRINT_DEBUG_EXTEND("UART%d: <0x%04x> %s <- 0x%08llx\n", s->channel,
+ offset, exynos4210_uart_regname(offset), (long long unsigned int)val);
+
+ switch (offset) {
+ case ULCON:
+ case UBRDIV:
+ case UFRACVAL:
+ s->reg[I_(offset)] = val;
+ exynos4210_uart_update_parameters(s);
+ break;
+ case UFCON:
+ s->reg[I_(UFCON)] = val;
+ if (val & UFCON_Rx_FIFO_RESET) {
+ fifo_reset(&s->rx);
+ s->reg[I_(UFCON)] &= ~UFCON_Rx_FIFO_RESET;
+ PRINT_DEBUG("UART%d: Rx FIFO Reset\n", s->channel);
+ }
+ if (val & UFCON_Tx_FIFO_RESET) {
+ fifo_reset(&s->tx);
+ s->reg[I_(UFCON)] &= ~UFCON_Tx_FIFO_RESET;
+ PRINT_DEBUG("UART%d: Tx FIFO Reset\n", s->channel);
+ }
+ break;
+
+ case UTXH:
+ if (s->chr) {
+ s->reg[I_(UTRSTAT)] &= ~(UTRSTAT_TRANSMITTER_EMPTY |
+ UTRSTAT_Tx_BUFFER_EMPTY);
+ ch = (uint8_t)val;
+ qemu_chr_fe_write(s->chr, &ch, 1);
+#if DEBUG_Tx_DATA
+ fprintf(stderr, "%c", ch);
+#endif
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_TRANSMITTER_EMPTY |
+ UTRSTAT_Tx_BUFFER_EMPTY;
+ s->reg[I_(UINTSP)] |= UINTSP_TXD;
+ exynos4210_uart_update_irq(s);
+ }
+ break;
+
+ case UINTP:
+ s->reg[I_(UINTP)] &= ~val;
+ s->reg[I_(UINTSP)] &= ~val;
+ PRINT_DEBUG("UART%d: UINTP [%04x] have been cleared: %08x\n",
+ s->channel, offset, s->reg[I_(UINTP)]);
+ exynos4210_uart_update_irq(s);
+ break;
+ case UTRSTAT:
+ case UERSTAT:
+ case UFSTAT:
+ case UMSTAT:
+ case URXH:
+ PRINT_DEBUG("UART%d: Trying to write into RO register: %s [%04x]\n",
+ s->channel, exynos4210_uart_regname(offset), offset);
+ break;
+ case UINTSP:
+ s->reg[I_(UINTSP)] &= ~val;
+ break;
+ case UINTM:
+ s->reg[I_(UINTM)] = val;
+ exynos4210_uart_update_irq(s);
+ break;
+ case UCON:
+ case UMCON:
+ default:
+ s->reg[I_(offset)] = val;
+ break;
+ }
+}
+static uint64_t exynos4210_uart_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ uint32_t res;
+
+ switch (offset) {
+ case UERSTAT: /* Read Only */
+ res = s->reg[I_(UERSTAT)];
+ s->reg[I_(UERSTAT)] = 0;
+ return res;
+ case UFSTAT: /* Read Only */
+ s->reg[I_(UFSTAT)] = fifo_elements_number(&s->rx) & 0xff;
+ if (fifo_empty_elements_number(&s->rx) == 0) {
+ s->reg[I_(UFSTAT)] |= UFSTAT_Rx_FIFO_FULL;
+ s->reg[I_(UFSTAT)] &= ~0xff;
+ }
+ return s->reg[I_(UFSTAT)];
+ case URXH:
+ if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
+ if (fifo_elements_number(&s->rx)) {
+ res = fifo_retrieve(&s->rx);
+#if DEBUG_Rx_DATA
+ fprintf(stderr, "%c", res);
+#endif
+ if (!fifo_elements_number(&s->rx)) {
+ s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
+ } else {
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+ } else {
+ s->reg[I_(UINTSP)] |= UINTSP_ERROR;
+ exynos4210_uart_update_irq(s);
+ res = 0;
+ }
+ } else {
+ s->reg[I_(UTRSTAT)] &= ~UTRSTAT_Rx_BUFFER_DATA_READY;
+ res = s->reg[I_(URXH)];
+ }
+ return res;
+ case UTXH:
+ PRINT_DEBUG("UART%d: Trying to read from WO register: %s [%04x]\n",
+ s->channel, exynos4210_uart_regname(offset), offset);
+ break;
+ default:
+ return s->reg[I_(offset)];
+ }
+
+ return 0;
+}
+
+static const MemoryRegionOps exynos4210_uart_ops = {
+ .read = exynos4210_uart_read,
+ .write = exynos4210_uart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid = {
+ .max_access_size = 4,
+ .unaligned = false
+ },
+};
+
+static int exynos4210_uart_can_receive(void *opaque)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+
+ return fifo_empty_elements_number(&s->rx);
+}
+
+
+static void exynos4210_uart_receive(void *opaque, const uint8_t *buf, int size)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+ int i;
+
+ if (s->reg[I_(UFCON)] & UFCON_FIFO_ENABLE) {
+ if (fifo_empty_elements_number(&s->rx) < size) {
+ for (i = 0; i < fifo_empty_elements_number(&s->rx); i++) {
+ fifo_store(&s->rx, buf[i]);
+ }
+ s->reg[I_(UINTSP)] |= UINTSP_ERROR;
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ } else {
+ for (i = 0; i < size; i++) {
+ fifo_store(&s->rx, buf[i]);
+ }
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+ /* XXX: Around here we maybe should check Rx trigger level */
+ s->reg[I_(UINTSP)] |= UINTSP_RXD;
+ } else {
+ s->reg[I_(URXH)] = buf[0];
+ s->reg[I_(UINTSP)] |= UINTSP_RXD;
+ s->reg[I_(UTRSTAT)] |= UTRSTAT_Rx_BUFFER_DATA_READY;
+ }
+
+ exynos4210_uart_update_irq(s);
+}
+
+
+static void exynos4210_uart_event(void *opaque, int event)
+{
+ Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+
+ if (event == CHR_EVENT_BREAK) {
+ /* When the RxDn is held in logic 0, then a null byte is pushed into the
+ * fifo */
+ fifo_store(&s->rx, '\0');
+ s->reg[I_(UERSTAT)] |= UERSTAT_BREAK;
+ exynos4210_uart_update_irq(s);
+ }
+}
+
+
+static void exynos4210_uart_reset(DeviceState *dev)
+{
+ Exynos4210UartState *s =
+ container_of(dev, Exynos4210UartState, busdev.qdev);
+ int regs_number = sizeof(exynos4210_uart_regs)/sizeof(Exynos4210UartReg);
+ int i;
+
+ for (i = 0; i < regs_number; i++) {
+ s->reg[I_(exynos4210_uart_regs[i].offset)] =
+ exynos4210_uart_regs[i].reset_value;
+ }
+
+ fifo_reset(&s->rx);
+ fifo_reset(&s->tx);
+
+ PRINT_DEBUG("UART%d: Rx FIFO size: %d\n", s->channel, s->rx.size);
+}
+
+static const VMStateDescription vmstate_exynos4210_uart_fifo = {
+ .name = "exynos4210.uart.fifo",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(sp, Exynos4210UartFIFO),
+ VMSTATE_UINT32(rp, Exynos4210UartFIFO),
+ VMSTATE_VBUFFER_UINT32(data, Exynos4210UartFIFO, 1, NULL, 0, size),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_exynos4210_uart = {
+ .name = "exynos4210.uart",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(rx, Exynos4210UartState, 1,
+ vmstate_exynos4210_uart_fifo, Exynos4210UartFIFO),
+ VMSTATE_UINT32_ARRAY(reg, Exynos4210UartState,
+ EXYNOS4210_UART_REGS_MEM_SIZE / sizeof(uint32_t)),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+DeviceState *exynos4210_uart_create(target_phys_addr_t addr,
+ int fifo_size,
+ int channel,
+ CharDriverState *chr,
+ qemu_irq irq)
+{
+ DeviceState *dev;
+ SysBusDevice *bus;
+
+ dev = qdev_create(NULL, "exynos4210.uart");
+
+ if (!chr) {
+ if (channel >= MAX_SERIAL_PORTS) {
+ hw_error("Only %d serial ports are supported by QEMU.\n",
+ MAX_SERIAL_PORTS);
+ }
+ chr = serial_hds[channel];
+ if (!chr) {
+ chr = qemu_chr_new("exynos4210.uart", "null", NULL);
+ if (!(chr)) {
+ hw_error("Can't assign serial port to UART%d.\n", channel);
+ }
+ }
+ }
+
+ qdev_prop_set_chr(dev, "chardev", chr);
+ qdev_prop_set_uint32(dev, "channel", channel);
+ qdev_prop_set_uint32(dev, "rx-size", fifo_size);
+ qdev_prop_set_uint32(dev, "tx-size", fifo_size);
+
+ bus = sysbus_from_qdev(dev);
+ qdev_init_nofail(dev);
+ if (addr != (target_phys_addr_t)-1) {
+ sysbus_mmio_map(bus, 0, addr);
+ }
+ sysbus_connect_irq(bus, 0, irq);
+
+ return dev;
+}
+
+static int exynos4210_uart_init(SysBusDevice *dev)
+{
+ Exynos4210UartState *s = FROM_SYSBUS(Exynos4210UartState, dev);
+
+ /* memory mapping */
+ memory_region_init_io(&s->iomem, &exynos4210_uart_ops, s, "exynos4210.uart",
+ EXYNOS4210_UART_REGS_MEM_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ sysbus_init_irq(dev, &s->irq);
+
+ qemu_chr_add_handlers(s->chr, exynos4210_uart_can_receive,
+ exynos4210_uart_receive, exynos4210_uart_event, s);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_uart_info = {
+ .init = exynos4210_uart_init,
+ .qdev.name = "exynos4210.uart",
+ .qdev.size = sizeof(Exynos4210UartState),
+ .qdev.vmsd = &vmstate_exynos4210_uart,
+ .qdev.reset = exynos4210_uart_reset,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_CHR("chardev", Exynos4210UartState, chr),
+ DEFINE_PROP_UINT32("channel", Exynos4210UartState, channel, 0),
+ DEFINE_PROP_UINT32("rx-size", Exynos4210UartState, rx.size, 16),
+ DEFINE_PROP_UINT32("tx-size", Exynos4210UartState, tx.size, 16),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void exynos4210_uart_register(void)
+{
+ sysbus_register_withprop(&exynos4210_uart_info);
+}
+
+device_init(exynos4210_uart_register)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 4/9] ARM: exynos4210: PWM support.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (2 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 3/9] ARM: exynos4210: UART support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 5/9] ARM: exynos4210: Added PMU register model Evgeny Voevodin
` (4 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
Makefile.target | 2 +-
hw/exynos4210.c | 12 ++
hw/exynos4210_pwm.c | 413 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 426 insertions(+), 1 deletions(-)
create mode 100644 hw/exynos4210_pwm.c
diff --git a/Makefile.target b/Makefile.target
index c856de3..1914870 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -340,7 +340,7 @@ obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
-obj-arm-y += exynos4_boards.o exynos4210_uart.o
+obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index 3838b96..ea5a1f8 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -29,6 +29,9 @@
#define EXYNOS4210_CHIPID_ADDR 0x10000000
+/* PWM */
+#define EXYNOS4210_PWM_BASE_ADDR 0x139D0000
+
/* UART's definitions */
#define EXYNOS4210_UART0_BASE_ADDR 0x13800000
#define EXYNOS4210_UART1_BASE_ADDR 0x13810000
@@ -201,6 +204,15 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
+ /* PWM */
+ sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
+ irq_table[exynos4210_get_irq(22, 0)],
+ irq_table[exynos4210_get_irq(22, 1)],
+ irq_table[exynos4210_get_irq(22, 2)],
+ irq_table[exynos4210_get_irq(22, 3)],
+ irq_table[exynos4210_get_irq(22, 4)],
+ NULL);
+
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
diff --git a/hw/exynos4210_pwm.c b/hw/exynos4210_pwm.c
new file mode 100644
index 0000000..29504d2
--- /dev/null
+++ b/hw/exynos4210_pwm.c
@@ -0,0 +1,413 @@
+/*
+ * Samsung exynos4210 Pulse Width Modulation Timer
+ *
+ * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd.
+ * All rights reserved.
+ *
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "sysbus.h"
+#include "qemu-timer.h"
+#include "qemu-common.h"
+#include "ptimer.h"
+
+#include "exynos4210.h"
+
+//#define DEBUG_PWM
+
+#ifdef DEBUG_PWM
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stdout, "PWM: [%24s:%5d] " fmt, __func__, __LINE__, \
+ ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while (0)
+#endif
+
+#define EXYNOS4210_PWM_TIMERS_NUM 5
+#define EXYNOS4210_PWM_REG_MEM_SIZE 0x50
+
+#define TCFG0 0x0000
+#define TCFG1 0x0004
+#define TCON 0x0008
+#define TCNTB0 0x000C
+#define TCMPB0 0x0010
+#define TCNTO0 0x0014
+#define TCNTB1 0x0018
+#define TCMPB1 0x001C
+#define TCNTO1 0x0020
+#define TCNTB2 0x0024
+#define TCMPB2 0x0028
+#define TCNTO2 0x002C
+#define TCNTB3 0x0030
+#define TCMPB3 0x0034
+#define TCNTO3 0x0038
+#define TCNTB4 0x003C
+#define TCNTO4 0x0040
+#define TINT_CSTAT 0x0044
+
+#define TCNTB(x) (0xC * (x))
+#define TCMPB(x) (0xC * (x) + 1)
+#define TCNTO(x) (0xC * (x) + 2)
+
+#define GET_PRESCALER(reg, x) (((reg) & (0xFF << (8 * (x)))) >> 8 * (x))
+#define GET_DIVIDER(reg, x) (1 << (((reg) & (0xF << (4 * (x)))) >> (4 * (x))))
+
+/*
+ * Attention! Timer4 doesn't have OUTPUT_INVERTER,
+ * so Auto Reload bit is not accessible by macros!
+ */
+#define TCON_TIMER_BASE(x) (((x) ? 1 : 0) * 4 + 4 * (x))
+#define TCON_TIMER_START(x) (1 << (TCON_TIMER_BASE(x) + 0))
+#define TCON_TIMER_MANUAL_UPD(x) (1 << (TCON_TIMER_BASE(x) + 1))
+#define TCON_TIMER_OUTPUT_INV(x) (1 << (TCON_TIMER_BASE(x) + 2))
+#define TCON_TIMER_AUTO_RELOAD(x) (1 << (TCON_TIMER_BASE(x) + 3))
+#define TCON_TIMER4_AUTO_RELOAD (1 << 22)
+
+#define TINT_CSTAT_STATUS(x) (1 << (5 + (x)))
+#define TINT_CSTAT_ENABLE(x) (1 << (x))
+
+/* timer struct */
+typedef struct {
+ uint32_t id; /* timer id */
+ qemu_irq irq; /* local timer irq */
+ uint32_t freq; /* timer frequency */
+
+ /* use ptimer.c to represent count down timer */
+ ptimer_state *ptimer; /* timer */
+
+ /* registers */
+ uint32_t reg_tcntb; /* counter register buffer */
+ uint32_t reg_tcmpb; /* compare register buffer */
+
+ struct Exynos4210PWMState *parent;
+
+} Exynos4210_pwm;
+
+
+typedef struct Exynos4210PWMState {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t reg_tcfg[2];
+ uint32_t reg_tcon;
+ uint32_t reg_tint_cstat;
+
+ Exynos4210_pwm timer[EXYNOS4210_PWM_TIMERS_NUM];
+
+} Exynos4210PWMState;
+
+/*** VMState ***/
+static const VMStateDescription VMState_Exynos4210_pwm = {
+ .name = "exynos4210.pwm.pwm",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(id, Exynos4210_pwm),
+ VMSTATE_UINT32(freq, Exynos4210_pwm),
+ VMSTATE_PTIMER(ptimer, Exynos4210_pwm),
+ VMSTATE_UINT32(reg_tcntb, Exynos4210_pwm),
+ VMSTATE_UINT32(reg_tcmpb, Exynos4210_pwm),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_Exynos4210PWMState = {
+ .name = "exynos4210.pwm",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(reg_tcfg, Exynos4210PWMState, 2),
+ VMSTATE_UINT32(reg_tcon, Exynos4210PWMState),
+ VMSTATE_UINT32(reg_tint_cstat, Exynos4210PWMState),
+ VMSTATE_STRUCT_ARRAY(timer, Exynos4210PWMState,
+ EXYNOS4210_PWM_TIMERS_NUM, 0,
+ VMState_Exynos4210_pwm, Exynos4210_pwm),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/*
+ * PWM update frequency
+ */
+static void exynos4210_pwm_update_freq(Exynos4210PWMState *s, uint32_t id)
+{
+ uint32_t freq;
+ freq = s->timer[id].freq;
+ if (id > 1) {
+ s->timer[id].freq = 24000000 /
+ ((GET_PRESCALER(s->reg_tcfg[0], 1) + 1) *
+ (GET_DIVIDER(s->reg_tcfg[1], id)));
+ } else {
+ s->timer[id].freq = 24000000 /
+ ((GET_PRESCALER(s->reg_tcfg[0], 0) + 1) *
+ (GET_DIVIDER(s->reg_tcfg[1], id)));
+ }
+
+ if (freq != s->timer[id].freq) {
+ ptimer_set_freq(s->timer[id].ptimer, s->timer[id].freq);
+ DPRINTF("freq=%dHz\n", s->timer[id].freq);
+ }
+}
+
+/*
+ * Counter tick handler
+ */
+static void exynos4210_pwm_tick(void *opaque)
+{
+ Exynos4210_pwm *s = (Exynos4210_pwm *)opaque;
+ Exynos4210PWMState *p = (Exynos4210PWMState *)s->parent;
+ uint32_t id = s->id;
+ bool cmp;
+
+ DPRINTF("timer %d tick\n", id);
+
+ /* set irq status */
+ p->reg_tint_cstat |= TINT_CSTAT_STATUS(id);
+
+ /* raise IRQ */
+ if (p->reg_tint_cstat & TINT_CSTAT_ENABLE(id)) {
+ DPRINTF("timer %d IRQ\n", id);
+ qemu_irq_raise(p->timer[id].irq);
+ }
+
+ /* reload timer */
+ if (id != 4) {
+ cmp = p->reg_tcon & TCON_TIMER_AUTO_RELOAD(id);
+ } else {
+ cmp = p->reg_tcon & TCON_TIMER4_AUTO_RELOAD;
+ }
+
+ if (cmp) {
+ DPRINTF("auto reload timer %d count to %x\n", id,
+ p->timer[id].reg_tcntb);
+ ptimer_set_count(p->timer[id].ptimer, p->timer[id].reg_tcntb);
+ ptimer_run(p->timer[id].ptimer, 1);
+ } else {
+ /* stop timer, set status to STOP, see Basic Timer Operation */
+ p->reg_tcon = ~TCON_TIMER_START(id);
+ ptimer_stop(p->timer[id].ptimer);
+ }
+}
+
+/*
+ * PWM Read
+ */
+static uint64_t exynos4210_pwm_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210PWMState *s = (Exynos4210PWMState *)opaque;
+ uint32_t value = 0;
+ int index;
+
+ switch (offset) {
+ case TCFG0: case TCFG1:
+ index = (offset - TCFG0) >> 2;
+ value = s->reg_tcfg[index];
+ break;
+
+ case TCON:
+ value = s->reg_tcon;
+ break;
+
+ case TCNTB0: case TCNTB1:
+ case TCNTB2: case TCNTB3: case TCNTB4:
+ index = (offset - TCNTB0) / 0xC;
+ value = s->timer[index].reg_tcntb;
+ break;
+
+ case TCMPB0: case TCMPB1:
+ case TCMPB2: case TCMPB3:
+ index = (offset - TCMPB0) / 0xC;
+ value = s->timer[index].reg_tcmpb;
+ break;
+
+ case TCNTO0: case TCNTO1:
+ case TCNTO2: case TCNTO3: case TCNTO4:
+ index = (offset == TCNTO4) ? 4 : (offset - TCNTO0) / 0xC;
+ value = ptimer_get_count(s->timer[index].ptimer);
+ break;
+
+ case TINT_CSTAT:
+ value = s->reg_tint_cstat;
+ break;
+
+ default:
+ fprintf(stderr,
+ "[exynos4210.pwm: bad read offset " TARGET_FMT_plx "]\n",
+ offset);
+ break;
+ }
+ return value;
+}
+
+/*
+ * PWM Write
+ */
+static void exynos4210_pwm_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ Exynos4210PWMState *s = (Exynos4210PWMState *)opaque;
+ int index;
+ uint32_t new_val;
+ int i;
+
+ switch (offset) {
+ case TCFG0: case TCFG1:
+ index = (offset - TCFG0) >> 2;
+ s->reg_tcfg[index] = value;
+
+ /* update timers frequencies */
+ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) {
+ exynos4210_pwm_update_freq(s, s->timer[i].id);
+ }
+ break;
+
+ case TCON:
+ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) {
+ if ((value & TCON_TIMER_MANUAL_UPD(i)) >
+ (s->reg_tcon & TCON_TIMER_MANUAL_UPD(i))) {
+ /*
+ * TCNTB and TCMPB are loaded into TCNT and TCMP.
+ * Update timers.
+ */
+
+ /* this will start timer to run, this ok, because
+ * during processing start bit timer will be stopped
+ * if needed */
+ ptimer_set_count(s->timer[i].ptimer, s->timer[i].reg_tcntb);
+ DPRINTF("set timer %d count to %x\n", i,
+ s->timer[i].reg_tcntb);
+ }
+
+ if ((value & TCON_TIMER_START(i)) >
+ (s->reg_tcon & TCON_TIMER_START(i))) {
+ /* changed to start */
+ ptimer_run(s->timer[i].ptimer, 1);
+ DPRINTF("run timer %d\n", i);
+ }
+
+ if ((value & TCON_TIMER_START(i)) <
+ (s->reg_tcon & TCON_TIMER_START(i))) {
+ /* changed to stop */
+ ptimer_stop(s->timer[i].ptimer);
+ DPRINTF("stop timer %d\n", i);
+ }
+ }
+ s->reg_tcon = value;
+ break;
+
+ case TCNTB0: case TCNTB1:
+ case TCNTB2: case TCNTB3: case TCNTB4:
+ index = (offset - TCNTB0) / 0xC;
+ s->timer[index].reg_tcntb = value;
+ break;
+
+ case TCMPB0: case TCMPB1:
+ case TCMPB2: case TCMPB3:
+ index = (offset - TCMPB0) / 0xC;
+ s->timer[index].reg_tcmpb = value;
+ break;
+
+ case TINT_CSTAT:
+ new_val = (s->reg_tint_cstat & 0x3E0) + (0x1F & value);
+ new_val &= ~(0x3E0 & value);
+
+ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) {
+ if ((new_val & TINT_CSTAT_STATUS(i)) <
+ (s->reg_tint_cstat & TINT_CSTAT_STATUS(i))) {
+ qemu_irq_lower(s->timer[i].irq);
+ }
+ }
+
+ s->reg_tint_cstat = new_val;
+ break;
+
+ default:
+ fprintf(stderr,
+ "[exynos4210.pwm: bad write offset " TARGET_FMT_plx "]\n",
+ offset);
+ break;
+
+ }
+}
+
+/*
+ * Set default values to timer fields and registers
+ */
+static void exynos4210_pwm_reset(DeviceState *d)
+{
+ Exynos4210PWMState *s = (Exynos4210PWMState *)d;
+ int i;
+ s->reg_tcfg[0] = 0x0101;
+ s->reg_tcfg[1] = 0x0;
+ s->reg_tcon = 0;
+ s->reg_tint_cstat = 0;
+ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) {
+ s->timer[i].reg_tcmpb = 0;
+ s->timer[i].reg_tcntb = 0;
+
+ exynos4210_pwm_update_freq(s, s->timer[i].id);
+ ptimer_stop(s->timer[i].ptimer);
+ }
+}
+
+static const MemoryRegionOps exynos4210_pwm_ops = {
+ .read = exynos4210_pwm_read,
+ .write = exynos4210_pwm_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+/*
+ * PWM timer initialization
+ */
+static int exynos4210_pwm_init(SysBusDevice *dev)
+{
+ Exynos4210PWMState *s = FROM_SYSBUS(Exynos4210PWMState, dev);
+ int i;
+ QEMUBH *bh;
+
+ for (i = 0; i < EXYNOS4210_PWM_TIMERS_NUM; i++) {
+ bh = qemu_bh_new(exynos4210_pwm_tick, &s->timer[i]);
+ sysbus_init_irq(dev, &s->timer[i].irq);
+ s->timer[i].ptimer = ptimer_init(bh);
+ s->timer[i].id = i;
+ s->timer[i].parent = s;
+ }
+
+ memory_region_init_io(&s->iomem, &exynos4210_pwm_ops, s, "exynos4210-pwm",
+ EXYNOS4210_PWM_REG_MEM_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_pwm_info = {
+ .qdev.name = "exynos4210.pwm",
+ .qdev.size = sizeof(struct Exynos4210PWMState),
+ .qdev.reset = exynos4210_pwm_reset,
+ .qdev.vmsd = &VMState_Exynos4210PWMState,
+ .init = exynos4210_pwm_init,
+};
+
+static void exynos4210_pwm_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_pwm_info);
+}
+
+device_init(exynos4210_pwm_register_devices)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 5/9] ARM: exynos4210: Added PMU register model.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (3 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 4/9] ARM: exynos4210: PWM support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 6/9] ARM: exynos4210: MCT support Evgeny Voevodin
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
From: Maksim Kozlov <m.kozlov@samsung.com>
This model just implements PMU registers as a bulk of memory.
The only reason of existence in such form is that secondary CPU
boot loader uses PMU INFORM5 register as a holding pen.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
Makefile.target | 1 +
hw/exynos4210.c | 9 +
hw/exynos4210_pmu.c | 549 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 559 insertions(+), 0 deletions(-)
create mode 100644 hw/exynos4210_pmu.c
diff --git a/Makefile.target b/Makefile.target
index 1914870..6cddf0c 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -341,6 +341,7 @@ obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
+obj-arm-y += exynos4210_pmu.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index ea5a1f8..2e2dbf0 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -52,6 +52,9 @@
#define EXYNOS4210_EXT_COMBINER_BASE_ADDR 0x10440000
#define EXYNOS4210_INT_COMBINER_BASE_ADDR 0x10448000
+/* PMU SFR base address */
+#define EXYNOS4210_PMU_BASE_ADDR 0x10020000
+
static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
0x09, 0x00, 0x00, 0x00 };
@@ -204,6 +207,12 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
+ /* PMU.
+ * The only reason of existence at the moment is that secondary CPU boot
+ * loader uses PMU INFORM5 register as a holding pen.
+ */
+ sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
+
/* PWM */
sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
irq_table[exynos4210_get_irq(22, 0)],
diff --git a/hw/exynos4210_pmu.c b/hw/exynos4210_pmu.c
new file mode 100644
index 0000000..235c3c3
--- /dev/null
+++ b/hw/exynos4210_pmu.c
@@ -0,0 +1,549 @@
+/*
+ * exynos4210 Power Management Unit (PMU) Emulation
+ *
+ * Copyright (C) 2011 Samsung Electronics Co Ltd.
+ * Maksim Kozlov <m.kozlov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This model just implements PMU registers as a bulk of memory. The only reason
+ * of existence in such form is that secondary CPU boot loader uses PMU INFORM5
+ * register as a holding pen.
+ */
+
+#include "sysbus.h"
+
+#undef DEBUG_PMU
+#undef DEBUG_PMU_EXTEND
+
+//#define DEBUG_PMU
+//#define DEBUG_PMU_EXTEND
+
+#define PRINT_DEBUG(fmt, args...) \
+ do {} while (0)
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do {} while (0)
+
+#ifdef DEBUG_PMU
+
+#undef PRINT_DEBUG
+#define PRINT_DEBUG(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+#ifdef DEBUG_PMU_EXTEND
+
+#undef PRINT_DEBUG_EXTEND
+#define PRINT_DEBUG_EXTEND(fmt, args...) \
+ do { \
+ fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \
+ } while (0)
+
+#endif /* EXTEND */
+#endif
+
+/*
+ * Offsets for PMU registers
+ */
+#define OM_STAT 0x0000 /* OM status register */
+#define RTC_CLKO_SEL 0x000C /* Controls RTCCLKOUT */
+#define GNSS_RTC_OUT_CTRL 0x0010 /* Controls GNSS_RTC_OUT */
+#define SYSTEM_POWER_DOWN_CTRL 0x0200 /* Decides whether system-level
+ low-power mode is used. */
+#define SYSTEM_POWER_DOWN_OPTION 0x0208 /* Sets control options for
+ CENTRAL_SEQ */
+#define SWRESET 0x0400 /* Generate software reset */
+#define RST_STAT 0x0404 /* Reset status register */
+#define WAKEUP_STAT 0x0600 /* Wakeup status register */
+#define EINT_WAKEUP_MASK 0x0604 /* Configure External INTerrupt mask */
+#define WAKEUP_MASK 0x0608 /* Configure wakeup source mask */
+#define HDMI_PHY_CONTROL 0x0700 /* HDMI PHY control register */
+#define USBDEVICE_PHY_CONTROL 0x0704 /* USB Device PHY control register */
+#define USBHOST_PHY_CONTROL 0x0708 /* USB HOST PHY control register */
+#define DAC_PHY_CONTROL 0x070C /* DAC control register */
+#define MIPI_PHY0_CONTROL 0x0710 /* MIPI PHY control register */
+#define MIPI_PHY1_CONTROL 0x0714 /* MIPI PHY control register */
+#define ADC_PHY_CONTROL 0x0718 /* TS-ADC control register */
+#define PCIe_PHY_CONTROL 0x071C /* TS-PCIe control register */
+#define SATA_PHY_CONTROL 0x0720 /* TS-SATA control register */
+#define INFORM0 0x0800 /* Information register 0 */
+#define INFORM1 0x0804 /* Information register 1 */
+#define INFORM2 0x0808 /* Information register 2 */
+#define INFORM3 0x080C /* Information register 3 */
+#define INFORM4 0x0810 /* Information register 4 */
+#define INFORM5 0x0814 /* Information register 5 */
+#define INFORM6 0x0818 /* Information register 6 */
+#define INFORM7 0x081C /* Information register 7 */
+#define PMU_DEBUG 0x0A00 /* PMU debug register */
+#define ARM_CORE0_SYS_PWR_REG 0x1000 /* Sets system-level low-power option */
+#define ARM_CORE1_SYS_PWR_REG 0x1010 /* Sets system-level low-power option */
+#define ARM_COMMON_SYS_PWR_REG 0x1080 /* Sets system-level low-power option */
+#define ARM_CPU_L2_0_SYS_PWR_REG 0x10C0 /* Sets system-level low-power option */
+#define ARM_CPU_L2_1_SYS_PWR_REG 0x10C4 /* Sets system-level low-power option */
+#define CMU_ACLKSTOP_SYS_PWR_REG 0x1100 /* Sets system-level low-power option */
+#define CMU_SCLKSTOP_SYS_PWR_REG 0x1104 /* Sets system-level low-power option */
+#define CMU_RESET_SYS_PWR_REG 0x110C /* Sets system-level low-power option */
+#define APLL_SYSCLK_SYS_PWR_REG 0x1120 /* Sets system-level low-power option */
+#define MPLL_SYSCLK_SYS_PWR_REG 0x1124 /* Sets system-level low-power option */
+#define VPLL_SYSCLK_SYS_PWR_REG 0x1128 /* Sets system-level low-power option */
+#define EPLL_SYSCLK_SYS_PWR_REG 0x112C /* Sets system-level low-power option */
+#define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG 0x1138 /* Sets system-level low-power
+ option */
+#define CMU_RESET_GPS_ALIVE_SYS_PWR_REG 0x113C /* Sets system-level low-power
+ option */
+#define CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 /* Sets system-level low-power option
+ */
+#define CMU_CLKSTOP_TV_SYS_PWR_REG 0x1144 /* Sets system-level low-power option
+ */
+#define CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 /* Sets system-level low-power option
+ */
+#define CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C /* Sets system-level low-power option
+ */
+#define CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 /* Sets system-level low-power
+ option */
+#define CMU_CLKSTOP_LCD1_SYS_PWR_REG 0x1154 /* Sets system-level low-power
+ option */
+#define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 /* Sets system-level low-power
+ option */
+#define CMU_CLKSTOP_GPS_SYS_PWR_REG 0x115C /* Sets system-level low-power
+ option */
+#define CMU_RESET_CAM_SYS_PWR_REG 0x1160 /* Sets system-level low-power
+ option */
+#define CMU_RESET_TV_SYS_PWR_REG 0x1164 /* Sets system-level low-power
+ option */
+#define CMU_RESET_MFC_SYS_PWR_REG 0x1168 /* Sets system-level low-power
+ option */
+#define CMU_RESET_G3D_SYS_PWR_REG 0x116C /* Sets system-level low-power
+ option */
+#define CMU_RESET_LCD0_SYS_PWR_REG 0x1170 /* Sets system-level low-power
+ option */
+#define CMU_RESET_LCD1_SYS_PWR_REG 0x1174 /* Sets system-level low-power
+ option */
+#define CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 /* Sets system-level low-power
+ option */
+#define CMU_RESET_GPS_SYS_PWR_REG 0x117C /* Sets system-level low-power
+ option */
+#define TOP_BUS_SYS_PWR_REG 0x1180 /* Sets system-level low-power
+ option */
+#define TOP_RETENTION_SYS_PWR_REG 0x1184 /* Sets system-level low-power
+ option */
+#define TOP_PWR_SYS_PWR_REG 0x1188 /* Sets system-level low-power
+ option */
+#define LOGIC_RESET_SYS_PWR_REG 0x11A0 /* Sets system-level low-power
+ option */
+#define OneNANDXL_MEM_SYS_PWR_REG 0x11C0 /* Sets system-level low-power
+ option */
+#define MODEMIF_MEM_SYS_PWR_REG 0x11C4 /* Sets system-level low-power
+ option */
+#define USBDEVICE_MEM_SYS_PWR_REG 0x11CC /* Sets system-level low-power
+ option */
+#define SDMMC_MEM_SYS_PWR_REG 0x11D0 /* Sets system-level low-power
+ option */
+#define CSSYS_MEM_SYS_PWR_REG 0x11D4 /* Sets system-level low-power
+ option */
+#define SECSS_MEM_SYS_PWR_REG 0x11D8 /* Sets system-level low-power
+ option */
+#define PCIe_MEM_SYS_PWR_REG 0x11E0 /* Sets system-level low-power
+ option */
+#define SATA_MEM_SYS_PWR_REG 0x11E4 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_UART_SYS_PWR_REG 0x1224 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 /* Sets system-level low-power
+ option */
+#define PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 /* Sets system-level low-power
+ option */
+#define PAD_ISOLATION_SYS_PWR_REG 0x1240 /* Sets system-level low-power
+ option */
+#define PAD_ALV_SEL_SYS_PWR_REG 0x1260 /* Sets system-level low-power option */
+#define XUSBXTI_SYS_PWR_REG 0x1280 /* Sets system-level low-power option */
+#define XXTI_SYS_PWR_REG 0x1284 /* Sets system-level low-power option */
+#define EXT_REGULATOR_SYS_PWR_REG 0x12C0 /* Sets system-level low-power
+ option */
+#define GPIO_MODE_SYS_PWR_REG 0x1300 /* Sets system-level low-power option */
+#define GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 /* Sets system-level low-power
+ option */
+#define CAM_SYS_PWR_REG 0x1380 /* Sets system-level low-power option */
+#define TV_SYS_PWR_REG 0x1384 /* Sets system-level low-power option */
+#define MFC_SYS_PWR_REG 0x1388 /* Sets system-level low-power option */
+#define G3D_SYS_PWR_REG 0x138C /* Sets system-level low-power option */
+#define LCD0_SYS_PWR_REG 0x1390 /* Sets system-level low-power option */
+#define LCD1_SYS_PWR_REG 0x1394 /* Sets system-level low-power option */
+#define MAUDIO_SYS_PWR_REG 0x1398 /* Sets system-level low-power option */
+#define GPS_SYS_PWR_REG 0x139C /* Sets system-level low-power option */
+#define GPS_ALIVE_SYS_PWR_REG 0x13A0 /* Sets system-level low-power option */
+#define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */
+#define ARM_CORE0_STATUS 0x2004 /* Check power mode of ARM_CORE0 */
+#define ARM_CORE0_OPTION 0x2008 /* Sets control options for ARM_CORE0 */
+#define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */
+#define ARM_CORE1_STATUS 0x2084 /* Check power mode of ARM_CORE1 */
+#define ARM_CORE1_OPTION 0x2088 /* Sets control options for ARM_CORE0 */
+#define ARM_COMMON_OPTION 0x2408 /* Sets control options for ARM_COMMON */
+#define ARM_CPU_L2_0_CONFIGURATION 0x2600 /* Configure power mode of
+ ARM_CPU_L2_0 */
+#define ARM_CPU_L2_0_STATUS 0x2604 /* Check power mode of ARM_CPU_L2_0 */
+#define ARM_CPU_L2_1_CONFIGURATION 0x2620 /* Configure power mode of
+ ARM_CPU_L2_1 */
+#define ARM_CPU_L2_1_STATUS 0x2624 /* Check power mode of ARM_CPU_L2_1 */
+#define PAD_RETENTION_MAUDIO_OPTION 0x3028 /* Sets control options for
+ PAD_RETENTION_MAUDIO */
+#define PAD_RETENTION_GPIO_OPTION 0x3108 /* Sets control options for
+ PAD_RETENTION_GPIO */
+#define PAD_RETENTION_UART_OPTION 0x3128 /* Sets control options for
+ PAD_RETENTION_UART */
+#define PAD_RETENTION_MMCA_OPTION 0x3148 /* Sets control options for
+ PAD_RETENTION_MMCA */
+#define PAD_RETENTION_MMCB_OPTION 0x3168 /* Sets control options for
+ PAD_RETENTION_MMCB */
+#define PAD_RETENTION_EBIA_OPTION 0x3188 /* Sets control options for
+ PAD_RETENTION_EBIA */
+#define PAD_RETENTION_EBIB_OPTION 0x31A8 /* Sets control options for
+ PAD_RETENTION_EBIB */
+#define PS_HOLD_CONTROL 0x330C /* PS_HOLD control register */
+#define XUSBXTI_CONFIGURATION 0x3400 /* Configure the pad of XUSBXTI */
+#define XUSBXTI_STATUS 0x3404 /* Check the pad of XUSBXTI */
+#define XUSBXTI_DURATION 0x341C /* Sets time required for XUSBXTI to be
+ stabilized */
+#define XXTI_CONFIGURATION 0x3420 /* Configure the pad of XXTI */
+#define XXTI_STATUS 0x3424 /* Check the pad of XXTI */
+#define XXTI_DURATION 0x343C /* Sets time required for XXTI to be
+ stabilized */
+#define EXT_REGULATOR_DURATION 0x361C /* Sets time required for EXT_REGULATOR
+ to be stabilized */
+#define CAM_CONFIGURATION 0x3C00 /* Configure power mode of CAM */
+#define CAM_STATUS 0x3C04 /* Check power mode of CAM */
+#define CAM_OPTION 0x3C08 /* Sets control options for CAM */
+#define TV_CONFIGURATION 0x3C20 /* Configure power mode of TV */
+#define TV_STATUS 0x3C24 /* Check power mode of TV */
+#define TV_OPTION 0x3C28 /* Sets control options for TV */
+#define MFC_CONFIGURATION 0x3C40 /* Configure power mode of MFC */
+#define MFC_STATUS 0x3C44 /* Check power mode of MFC */
+#define MFC_OPTION 0x3C48 /* Sets control options for MFC */
+#define G3D_CONFIGURATION 0x3C60 /* Configure power mode of G3D */
+#define G3D_STATUS 0x3C64 /* Check power mode of G3D */
+#define G3D_OPTION 0x3C68 /* Sets control options for G3D */
+#define LCD0_CONFIGURATION 0x3C80 /* Configure power mode of LCD0 */
+#define LCD0_STATUS 0x3C84 /* Check power mode of LCD0 */
+#define LCD0_OPTION 0x3C88 /* Sets control options for LCD0 */
+#define LCD1_CONFIGURATION 0x3CA0 /* Configure power mode of LCD1 */
+#define LCD1_STATUS 0x3CA4 /* Check power mode of LCD1 */
+#define LCD1_OPTION 0x3CA8 /* Sets control options for LCD1 */
+#define GPS_CONFIGURATION 0x3CE0 /* Configure power mode of GPS */
+#define GPS_STATUS 0x3CE4 /* Check power mode of GPS */
+#define GPS_OPTION 0x3CE8 /* Sets control options for GPS */
+#define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */
+#define GPS_ALIVE_STATUS 0x3D04 /* Check power mode of GPS */
+#define GPS_ALIVE_OPTION 0x3D08 /* Sets control options for GPS */
+
+#define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c
+
+typedef struct Exynos4210PmuReg {
+ const char *name; /* the only reason is the debug output */
+ uint32_t offset;
+ uint32_t reset_value;
+} Exynos4210PmuReg;
+
+static const Exynos4210PmuReg exynos4210_pmu_regs[] = {
+ {"OM_STAT", OM_STAT, 0x00000000},
+ {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000},
+ {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001},
+ {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000},
+ {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000},
+ {"SWRESET", SWRESET, 0x00000000},
+ {"RST_STAT", RST_STAT, 0x00000000},
+ {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000},
+ {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000},
+ {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000},
+ {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000},
+ {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000},
+ {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000},
+ {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000},
+ {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000},
+ {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000},
+ {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001},
+ {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000},
+ {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000},
+ {"INFORM0", INFORM0, 0x00000000},
+ {"INFORM1", INFORM1, 0x00000000},
+ {"INFORM2", INFORM2, 0x00000000},
+ {"INFORM3", INFORM3, 0x00000000},
+ {"INFORM4", INFORM4, 0x00000000},
+ {"INFORM5", INFORM5, 0x00000000},
+ {"INFORM6", INFORM6, 0x00000000},
+ {"INFORM7", INFORM7, 0x00000000},
+ {"PMU_DEBUG", PMU_DEBUG, 0x00000000},
+ {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF},
+ {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF},
+ {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF},
+ {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF},
+ {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF},
+ {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+ {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+ {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+ {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF},
+ {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF},
+ {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF},
+ {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF},
+ {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF},
+ {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG,
+ 0xFFFFFFFF},
+ {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF},
+ {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF},
+ {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF},
+ {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF},
+ {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF},
+ {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF},
+ {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+ {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF},
+ {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF},
+ {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF},
+ {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF},
+ {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF},
+ {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF},
+ {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
+ {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF},
+ {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF},
+ {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003},
+ {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003},
+ {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001},
+ {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003},
+ {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003},
+ {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001},
+ {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001},
+ {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003},
+ {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003},
+ {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003},
+ {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003},
+ {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000},
+ {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000},
+ {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000},
+ {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000},
+ {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000},
+ {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000},
+ {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000},
+ {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200},
+ {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001},
+ {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001},
+ {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000},
+ {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001},
+ {"XXTI_STATUS", XXTI_STATUS, 0x00000001},
+ {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000},
+ {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF},
+ {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007},
+ {"CAM_STATUS", CAM_STATUS, 0x00060007},
+ {"CAM_OPTION", CAM_OPTION, 0x00000001},
+ {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007},
+ {"TV_STATUS", TV_STATUS, 0x00060007},
+ {"TV_OPTION", TV_OPTION, 0x00000001},
+ {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007},
+ {"MFC_STATUS", MFC_STATUS, 0x00060007},
+ {"MFC_OPTION", MFC_OPTION, 0x00000001},
+ {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007},
+ {"G3D_STATUS", G3D_STATUS, 0x00060007},
+ {"G3D_OPTION", G3D_OPTION, 0x00000001},
+ {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007},
+ {"LCD0_STATUS", LCD0_STATUS, 0x00060007},
+ {"LCD0_OPTION", LCD0_OPTION, 0x00000001},
+ {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007},
+ {"LCD1_STATUS", LCD1_STATUS, 0x00060007},
+ {"LCD1_OPTION", LCD1_OPTION, 0x00000001},
+ {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007},
+ {"GPS_STATUS", GPS_STATUS, 0x00060007},
+ {"GPS_OPTION", GPS_OPTION, 0x00000001},
+ {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007},
+ {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007},
+ {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001},
+};
+
+/*
+ * for indexing register in the uint32_t array
+ *
+ * 'reg' - register offset (see offsets definitions above)
+ *
+ */
+#define I_(reg) (reg / sizeof(uint32_t))
+
+typedef struct Exynos4210PmuState {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ uint32_t reg[EXYNOS4210_PMU_REGS_MEM_SIZE];
+} Exynos4210PmuState;
+
+#ifdef DEBUG_PMU
+/* The only meaning of life - debugging. This functions should be only used
+ * inside PRINT_DEBUG_... macros
+ */
+static const char *exynos4210_pmu_regname(target_phys_addr_t offset)
+{
+ int regs_number = sizeof(exynos4210_pmu_regs) / sizeof(Exynos4210PmuReg);
+ int i;
+
+ for (i = 0; i < regs_number; i++) {
+ if (offset == exynos4210_pmu_regs[i].offset) {
+ return exynos4210_pmu_regs[i].name;
+ }
+ }
+
+ return NULL;
+}
+#endif
+
+static uint64_t exynos4210_pmu_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
+
+ if (offset > (EXYNOS4210_PMU_REGS_MEM_SIZE - sizeof(uint32_t))) {
+ hw_error("%s: Bad offset 0x%x\n", __func__, (int)offset);
+ }
+
+#ifdef DEBUG_PMU
+ if (exynos4210_pmu_regname(offset)) {
+ PRINT_DEBUG_EXTEND("%s [0x%04x] -> %08x\n",
+ exynos4210_pmu_regname(offset),
+ offset, s->reg[I_(offset)]);
+ } else {
+ PRINT_DEBUG_EXTEND("Bad offset 0x%x\n", (int)offset);
+ }
+#endif
+ return s->reg[I_(offset)];
+}
+
+
+static void exynos4210_pmu_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
+
+ if (offset > (EXYNOS4210_PMU_REGS_MEM_SIZE - sizeof(uint32_t))) {
+ hw_error("%s: Bad offset 0x%x\n", __func__, (int)offset);
+ }
+
+ s->reg[I_(offset)] = val;
+#ifdef DEBUG_PMU
+ if (exynos4210_pmu_regname(offset)) {
+ PRINT_DEBUG_EXTEND("%s <0x%04x> <- %08x\n",
+ exynos4210_pmu_regname(offset),
+ offset, s->reg[I_(offset)]);
+ } else {
+ PRINT_DEBUG_EXTEND("Bad offset 0x%x\n", (int)offset);
+ }
+#endif
+
+}
+
+
+static const MemoryRegionOps exynos4210_pmu_ops = {
+ .read = exynos4210_pmu_read,
+ .write = exynos4210_pmu_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+
+static void exynos4210_pmu_reset(void *opaque)
+{
+ Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
+ int regs_number = sizeof(exynos4210_pmu_regs) / sizeof(Exynos4210PmuReg);
+ int i;
+
+ /* Set default values for registers */
+ for (i = 0; i < regs_number; i++) {
+ s->reg[I_(exynos4210_pmu_regs[i].offset)] =
+ exynos4210_pmu_regs[i].reset_value;
+ }
+}
+
+static int exynos4210_pmu_init(SysBusDevice *dev)
+{
+ Exynos4210PmuState *s = FROM_SYSBUS(Exynos4210PmuState, dev);
+
+ /* memory mapping */
+ memory_region_init_io(&s->iomem, &exynos4210_pmu_ops, s, "exynos4210.pmu",
+ EXYNOS4210_PMU_REGS_MEM_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ qemu_register_reset(exynos4210_pmu_reset, s);
+
+ exynos4210_pmu_reset(s);
+
+ return 0;
+}
+
+static void exynos4210_pmu_register(void)
+{
+ sysbus_register_dev("exynos4210.pmu", sizeof(Exynos4210PmuState),
+ exynos4210_pmu_init);
+}
+
+
+device_init(exynos4210_pmu_register)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 6/9] ARM: exynos4210: MCT support.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (4 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 5/9] ARM: exynos4210: Added PMU register model Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support Evgeny Voevodin
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
Makefile.target | 2 +-
hw/exynos4210.c | 19 +
hw/exynos4210_mct.c | 1479 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1499 insertions(+), 1 deletions(-)
create mode 100644 hw/exynos4210_mct.c
diff --git a/Makefile.target b/Makefile.target
index 6cddf0c..24e7e99 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -341,7 +341,7 @@ obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
-obj-arm-y += exynos4210_pmu.o
+obj-arm-y += exynos4210_pmu.o exynos4210_mct.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index 2e2dbf0..aceec2a 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -32,6 +32,9 @@
/* PWM */
#define EXYNOS4210_PWM_BASE_ADDR 0x139D0000
+/* MCT */
+#define EXYNOS4210_MCT_BASE_ADDR 0x10050000
+
/* UART's definitions */
#define EXYNOS4210_UART0_BASE_ADDR 0x13800000
#define EXYNOS4210_UART1_BASE_ADDR 0x13810000
@@ -222,6 +225,22 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
irq_table[exynos4210_get_irq(22, 4)],
NULL);
+ /* Multi Core Timer */
+ dev = qdev_create(NULL, "exynos4210.mct");
+ qdev_init_nofail(dev);
+ busdev = sysbus_from_qdev(dev);
+ for (n = 0; n < 4; n++) {
+ /* Connect global timer interrupts to Combiner gpio_in */
+ sysbus_connect_irq(busdev, n,
+ irq_table[exynos4210_get_irq(1, 4 + n)]);
+ }
+ /* Connect local timer interrupts to Combiner gpio_in */
+ sysbus_connect_irq(busdev, 4,
+ irq_table[exynos4210_get_irq(51, 0)]);
+ sysbus_connect_irq(busdev, 5,
+ irq_table[exynos4210_get_irq(35, 3)]);
+ sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
+
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
diff --git a/hw/exynos4210_mct.c b/hw/exynos4210_mct.c
new file mode 100644
index 0000000..81bc04e
--- /dev/null
+++ b/hw/exynos4210_mct.c
@@ -0,0 +1,1479 @@
+/*
+ * Samsung exynos4210 Multi Core timer
+ *
+ * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd.
+ * All rights reserved.
+ *
+ * Evgeny Voevodin <e.voevodin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Global Timer:
+ *
+ * Consists of two timers. First represents Free Running Counter and second
+ * is used to measure interval from FRC to nearest comparator.
+ *
+ * 0 UINT64_MAX
+ * | timer0 |
+ * | <-------------------------------------------------------------- |
+ * | --------------------------------------------frc---------------> |
+ * |______________________________________________|__________________|
+ * CMP0 CMP1 CMP2 | CMP3
+ * __| |_
+ * | timer1 |
+ * | -------------> |
+ * frc CMPx
+ *
+ * Problem: when implementing global timer as is, overflow arises.
+ * next_time = cur_time + period * count;
+ * period and count are 64 bits width.
+ * Lets arm timer for MCT_GT_COUNTER_STEP count and update internal G_CNT
+ * register during each event.
+ *
+ * Problem: both timers need to be implemented using MCT_XT_COUNTER_STEP because
+ * local timer contains two counters: TCNT and ICNT. TCNT == 0 -> ICNT--.
+ * IRQ is generated when ICNT riches zero. Implementation where TCNT == 0
+ * generates IRQs suffers from too frequently events. Better to have one
+ * uint64_t counter equal to TCNT*ICNT and arm ptimer.c for a minimum(TCNT*ICNT,
+ * MCT_GT_COUNTER_STEP); (yes, if target tunes ICNT * TCNT to be too low values,
+ * there is no way to avoid frequently events).
+ */
+
+#include "sysbus.h"
+#include "qemu-timer.h"
+#include "qemu-common.h"
+#include "ptimer.h"
+
+#include "exynos4210.h"
+
+//#define DEBUG_MCT
+
+#ifdef DEBUG_MCT
+#define DPRINTF(fmt, ...) \
+ do { fprintf(stdout, "MCT: [%24s:%5d] " fmt, __func__, __LINE__, \
+ ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while (0)
+#endif
+
+#define MCT_CFG 0x000
+#define G_CNT_L 0x100
+#define G_CNT_U 0x104
+#define G_CNT_WSTAT 0x110
+#define G_COMP0_L 0x200
+#define G_COMP0_U 0x204
+#define G_COMP0_ADD_INCR 0x208
+#define G_COMP1_L 0x210
+#define G_COMP1_U 0x214
+#define G_COMP1_ADD_INCR 0x218
+#define G_COMP2_L 0x220
+#define G_COMP2_U 0x224
+#define G_COMP2_ADD_INCR 0x228
+#define G_COMP3_L 0x230
+#define G_COMP3_U 0x234
+#define G_COMP3_ADD_INCR 0x238
+#define G_TCON 0x240
+#define G_INT_CSTAT 0x244
+#define G_INT_ENB 0x248
+#define G_WSTAT 0x24C
+#define L0_TCNTB 0x300
+#define L0_TCNTO 0x304
+#define L0_ICNTB 0x308
+#define L0_ICNTO 0x30C
+#define L0_FRCNTB 0x310
+#define L0_FRCNTO 0x314
+#define L0_TCON 0x320
+#define L0_INT_CSTAT 0x330
+#define L0_INT_ENB 0x334
+#define L0_WSTAT 0x340
+#define L1_TCNTB 0x400
+#define L1_TCNTO 0x404
+#define L1_ICNTB 0x408
+#define L1_ICNTO 0x40C
+#define L1_FRCNTB 0x410
+#define L1_FRCNTO 0x414
+#define L1_TCON 0x420
+#define L1_INT_CSTAT 0x430
+#define L1_INT_ENB 0x434
+#define L1_WSTAT 0x440
+
+#define MCT_CFG_GET_PRESCALER(x) ((x) & 0xFF)
+#define MCT_CFG_GET_DIVIDER(x) (1 << ((x) >> 8 & 7))
+
+#define GET_G_COMP_IDX(offset) (((offset) - G_COMP0_L) / 0x10)
+#define GET_G_COMP_ADD_INCR_IDX(offset) (((offset) - G_COMP0_ADD_INCR) / 0x10)
+
+#define G_COMP_L(x) (G_COMP0_L + (x) * 0x10)
+#define G_COMP_U(x) (G_COMP0_U + (x) * 0x10)
+
+#define G_COMP_ADD_INCR(x) (G_COMP0_ADD_INCR + (x) * 0x10)
+
+/* MCT bits */
+#define G_TCON_COMP_ENABLE(x) (1 << 2 * (x))
+#define G_TCON_AUTO_ICREMENT(x) (1 << (2 * (x) + 1))
+#define G_TCON_TIMER_ENABLE (1 << 8)
+
+#define G_INT_ENABLE(x) (1 << (x))
+#define G_INT_CSTAT_COMP(x) (1 << (x))
+
+#define G_CNT_WSTAT_L 1
+#define G_CNT_WSTAT_U 2
+
+#define G_WSTAT_COMP_L(x) (1 << 4 * (x))
+#define G_WSTAT_COMP_U(x) (1 << ((4 * (x)) + 1))
+#define G_WSTAT_COMP_ADDINCR(x) (1 << ((4 * (x)) + 2))
+#define G_WSTAT_TCON_WRITE (1 << 16)
+
+#define GET_L_TIMER_IDX(offset) ((((offset) & 0xF00) - L0_TCNTB) / 0x100)
+#define GET_L_TIMER_CNT_REG_IDX(offset, lt_i) \
+ (((offset) - (L0_TCNTB + 0x100 * (lt_i))) >> 2)
+
+#define L_ICNTB_MANUAL_UPDATE (1 << 31)
+
+#define L_TCON_TICK_START (1)
+#define L_TCON_INT_START (1 << 1)
+#define L_TCON_INTERVAL_MODE (1 << 2)
+#define L_TCON_FRC_START (1 << 3)
+
+#define L_INT_CSTAT_INTCNT (1 << 0)
+#define L_INT_CSTAT_FRCCNT (1 << 1)
+
+#define L_INT_INTENB_ICNTEIE (1 << 0)
+#define L_INT_INTENB_FRCEIE (1 << 1)
+
+#define L_WSTAT_TCNTB_WRITE (1 << 0)
+#define L_WSTAT_ICNTB_WRITE (1 << 1)
+#define L_WSTAT_FRCCNTB_WRITE (1 << 2)
+#define L_WSTAT_TCON_WRITE (1 << 3)
+
+enum local_timer_reg_cnt_indexes {
+ L_REG_CNT_TCNTB,
+ L_REG_CNT_TCNTO,
+ L_REG_CNT_ICNTB,
+ L_REG_CNT_ICNTO,
+ L_REG_CNT_FRCCNTB,
+ L_REG_CNT_FRCCNTO,
+
+ L_REG_CNT_AMOUNT
+};
+
+#define MCT_NIRQ 6
+#define MCT_SFR_SIZE 0x444
+
+#define MCT_GT_CMP_NUM 4
+
+#define MCT_GT_MAX_VAL UINT64_MAX
+
+#define MCT_GT_COUNTER_STEP 0x100000000ULL
+#define MCT_LT_COUNTER_STEP 0x100000000ULL
+#define MCT_LT_CNT_LOW_LIMIT 0x100
+
+/* global timer */
+typedef struct {
+ qemu_irq irq[MCT_GT_CMP_NUM];
+
+ struct gregs {
+ uint64_t cnt;
+ uint32_t cnt_wstat;
+ uint32_t tcon;
+ uint32_t int_cstat;
+ uint32_t int_enb;
+ uint32_t wstat;
+ uint64_t comp[MCT_GT_CMP_NUM];
+ uint32_t comp_add_incr[MCT_GT_CMP_NUM];
+ } reg;
+
+ uint64_t count; /* Value FRC was armed with */
+ int32_t curr_comp; /* Current comparator FRC is running to */
+
+ ptimer_state *ptimer_frc; /* FRC timer */
+
+} exynos4210_mct_gt;
+
+/* local timer */
+typedef struct {
+ int id; /* timer id */
+ qemu_irq irq; /* local timer irq */
+
+ struct tick_timer {
+ uint32_t cnt_run; /* cnt timer is running */
+ uint32_t int_run; /* int timer is running */
+
+ uint32_t last_icnto;
+ uint32_t last_tcnto;
+ uint32_t tcntb; /* initial value for TCNTB */
+ uint32_t icntb; /* initial value for ICNTB */
+
+ /* for step mode */
+ uint64_t distance; /* distance to count to the next event */
+ uint64_t progress; /* progress when counting by steps */
+ uint64_t count; /* count to arm timer with */
+
+ ptimer_state *ptimer_tick; /* timer for tick counter */
+ } tick_timer;
+
+ /* use ptimer.c to represent count down timer */
+
+ ptimer_state *ptimer_frc; /* timer for free running counter */
+
+ /* registers */
+ struct lregs {
+ uint32_t cnt[L_REG_CNT_AMOUNT];
+ uint32_t tcon;
+ uint32_t int_cstat;
+ uint32_t int_enb;
+ uint32_t wstat;
+ } reg;
+
+} exynos4210_mct_lt;
+
+typedef struct Exynos4210MCTState {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ /* Registers */
+ uint32_t reg_mct_cfg;
+
+ exynos4210_mct_lt l_timer[2];
+ exynos4210_mct_gt g_timer;
+
+ uint32_t freq; /* all timers tick frequency, TCLK */
+} Exynos4210MCTState;
+
+/*** VMState ***/
+static const VMStateDescription VMState_tick_timer = {
+ .name = "exynos4210.mct.tick_timer",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cnt_run, struct tick_timer),
+ VMSTATE_UINT32(int_run, struct tick_timer),
+ VMSTATE_UINT32(last_icnto, struct tick_timer),
+ VMSTATE_UINT32(last_tcnto, struct tick_timer),
+ VMSTATE_UINT32(tcntb, struct tick_timer),
+ VMSTATE_UINT32(icntb, struct tick_timer),
+ VMSTATE_UINT64(distance, struct tick_timer),
+ VMSTATE_UINT64(progress, struct tick_timer),
+ VMSTATE_UINT64(count, struct tick_timer),
+ VMSTATE_PTIMER(ptimer_tick, struct tick_timer),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_lregs = {
+ .name = "exynos4210.mct.lregs",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(cnt, struct lregs, L_REG_CNT_AMOUNT),
+ VMSTATE_UINT32(tcon, struct lregs),
+ VMSTATE_UINT32(int_cstat, struct lregs),
+ VMSTATE_UINT32(int_enb, struct lregs),
+ VMSTATE_UINT32(wstat, struct lregs),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_Exynos4210_mct_lt = {
+ .name = "exynos4210.mct.lt",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT32(id, exynos4210_mct_lt),
+ VMSTATE_STRUCT(tick_timer, exynos4210_mct_lt, 0,
+ VMState_tick_timer,
+ struct tick_timer),
+ VMSTATE_PTIMER(ptimer_frc, exynos4210_mct_lt),
+ VMSTATE_STRUCT(reg, exynos4210_mct_lt, 0,
+ VMState_lregs,
+ struct lregs),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_gregs = {
+ .name = "exynos4210.mct.lregs",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT64(cnt, struct gregs),
+ VMSTATE_UINT32(cnt_wstat, struct gregs),
+ VMSTATE_UINT32(tcon, struct gregs),
+ VMSTATE_UINT32(int_cstat, struct gregs),
+ VMSTATE_UINT32(int_enb, struct gregs),
+ VMSTATE_UINT32(wstat, struct gregs),
+ VMSTATE_UINT64_ARRAY(comp, struct gregs, MCT_GT_CMP_NUM),
+ VMSTATE_UINT32_ARRAY(comp_add_incr, struct gregs,
+ MCT_GT_CMP_NUM),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_Exynos4210_mct_gt = {
+ .name = "exynos4210.mct.lt",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(reg, exynos4210_mct_gt, 0, VMState_gregs,
+ struct gregs),
+ VMSTATE_UINT64(count, exynos4210_mct_gt),
+ VMSTATE_INT32(curr_comp, exynos4210_mct_gt),
+ VMSTATE_PTIMER(ptimer_frc, exynos4210_mct_gt),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription VMState_Exynos4210MCTState = {
+ .name = "exynos4210.mct",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(reg_mct_cfg, Exynos4210MCTState),
+ VMSTATE_STRUCT_ARRAY(l_timer, Exynos4210MCTState, 2, 0,
+ VMState_Exynos4210_mct_lt, exynos4210_mct_lt),
+ VMSTATE_STRUCT(g_timer, Exynos4210MCTState, 0,
+ VMState_Exynos4210_mct_gt, exynos4210_mct_gt),
+ VMSTATE_UINT32(freq, Exynos4210MCTState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void exynos4210_mct_update_freq(Exynos4210MCTState *s);
+
+/*
+ * Set counter of FRC global timer.
+ */
+static void exynos4210_gfrc_set_count(exynos4210_mct_gt *s, uint64_t count)
+{
+ s->count = count;
+ DPRINTF("global timer frc set count 0x%llx\n", count);
+ ptimer_set_count(s->ptimer_frc, count);
+}
+
+/*
+ * Get counter of FRC global timer.
+ */
+static uint64_t exynos4210_gfrc_get_count(exynos4210_mct_gt *s)
+{
+ uint64_t count = 0;
+ count = ptimer_get_count(s->ptimer_frc);
+ if (!count) {
+ /* Timer event was generated and s->reg.cnt holds adequate value */
+ return s->reg.cnt;
+ }
+ count = s->count - count;
+ return s->reg.cnt + count;
+}
+
+/*
+ * Stop global FRC timer
+ */
+static void exynos4210_gfrc_stop(exynos4210_mct_gt *s)
+{
+ DPRINTF("global timer frc stop\n");
+
+ ptimer_stop(s->ptimer_frc);
+}
+
+/*
+ * Start global FRC timer
+ */
+static void exynos4210_gfrc_start(exynos4210_mct_gt *s)
+{
+ DPRINTF("global timer frc start\n");
+
+ ptimer_run(s->ptimer_frc, 1);
+}
+
+/*
+ * Find next nearest Comparator. If current Comparator value equals to other
+ * Comparator value, skip them both
+ */
+static int32_t exynos4210_gcomp_find(Exynos4210MCTState *s)
+{
+ int res;
+ int i;
+ int enabled;
+ uint64_t min;
+ int min_comp_i;
+ uint64_t gfrc;
+ uint64_t distance;
+ uint64_t distance_min;
+ int comp_i;
+
+ /* get gfrc count */
+ gfrc = exynos4210_gfrc_get_count(&s->g_timer);
+
+ min = UINT64_MAX;
+ distance_min = UINT64_MAX;
+ comp_i = MCT_GT_CMP_NUM;
+ min_comp_i = MCT_GT_CMP_NUM;
+ enabled = 0;
+
+ /* lookup for nearest comparator */
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+
+ if (s->g_timer.reg.tcon & G_TCON_COMP_ENABLE(i)) {
+
+ enabled = 1;
+
+ if (s->g_timer.reg.comp[i] > gfrc) {
+ /* Comparator is upper then FRC */
+ distance = s->g_timer.reg.comp[i] - gfrc;
+
+ if (distance <= distance_min) {
+ distance_min = distance;
+ comp_i = i;
+ }
+ } else {
+ /* Comparator is below FRC, find the smallest */
+
+ if (s->g_timer.reg.comp[i] <= min) {
+ min = s->g_timer.reg.comp[i];
+ min_comp_i = i;
+ }
+ }
+ }
+ }
+
+ if (!enabled) {
+ /* All Comparators disabled */
+ res = -1;
+ } else if (comp_i < MCT_GT_CMP_NUM) {
+ /* Found upper Comparator */
+ res = comp_i;
+ } else {
+ /* All Comparators are below or equal to FRC */
+ res = min_comp_i;
+ }
+
+ DPRINTF("found comparator %d: comp 0x%llx distance 0x%llx, gfrc 0x%llx\n",
+ res,
+ s->g_timer.reg.comp[res],
+ distance_min,
+ gfrc);
+
+ return res;
+}
+
+/*
+ * Get distance to nearest Comparator
+ */
+static uint64_t exynos4210_gcomp_get_distance(Exynos4210MCTState *s, int32_t id)
+{
+ if (id == -1) {
+ /* no enabled Comparators, choose max distance */
+ return MCT_GT_COUNTER_STEP;
+ }
+ if (s->g_timer.reg.comp[id] - s->g_timer.reg.cnt < MCT_GT_COUNTER_STEP) {
+ return s->g_timer.reg.comp[id] - s->g_timer.reg.cnt;
+ } else {
+ return MCT_GT_COUNTER_STEP;
+ }
+}
+
+/*
+ * Restart global FRC timer
+ */
+static void exynos4210_gfrc_restart(Exynos4210MCTState *s)
+{
+ uint64_t distance;
+
+ exynos4210_gfrc_stop(&s->g_timer);
+
+ s->g_timer.curr_comp = exynos4210_gcomp_find(s);
+
+ distance = exynos4210_gcomp_get_distance(s, s->g_timer.curr_comp);
+
+ if (distance > MCT_GT_COUNTER_STEP || !distance) {
+ distance = MCT_GT_COUNTER_STEP;
+ }
+
+ exynos4210_gfrc_set_count(&s->g_timer, distance);
+ exynos4210_gfrc_start(&s->g_timer);
+}
+
+/*
+ * Raise global timer CMP IRQ
+ */
+static void exynos4210_gcomp_raise_irq(void *opaque, uint32_t id)
+{
+ exynos4210_mct_gt *s = opaque;
+
+ /* If CSTAT is pending and IRQ is enabled */
+ if ((s->reg.int_cstat & G_INT_CSTAT_COMP(id)) &&
+ (s->reg.int_enb & G_INT_ENABLE(id))) {
+ DPRINTF("gcmp timer[%d] IRQ\n", id);
+ qemu_irq_raise(s->irq[id]);
+ }
+}
+
+/*
+ * Lower global timer CMP IRQ
+ */
+static void exynos4210_gcomp_lower_irq(void *opaque, uint32_t id)
+{
+ exynos4210_mct_gt *s = opaque;
+ qemu_irq_lower(s->irq[id]);
+}
+
+/*
+ * Global timer FRC event handler.
+ * Each event occurs when internal counter reaches counter + MCT_GT_COUNTER_STEP
+ * Every time we arm global FRC timer to count for MCT_GT_COUNTER_STEP value
+ */
+static void exynos4210_gfrc_event(void *opaque)
+{
+ Exynos4210MCTState *s = (Exynos4210MCTState *)opaque;
+ int i;
+ uint64_t distance;
+
+ DPRINTF("\n");
+
+ s->g_timer.reg.cnt += s->g_timer.count;
+
+ /* Process all comparators */
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+
+ if (s->g_timer.reg.cnt == s->g_timer.reg.comp[i]) {
+ /* reached nearest comparator */
+
+ s->g_timer.reg.int_cstat |= G_INT_CSTAT_COMP(i);
+
+ /* Auto increment */
+ if (s->g_timer.reg.tcon & G_TCON_AUTO_ICREMENT(i)) {
+ s->g_timer.reg.comp[i] += s->g_timer.reg.comp_add_incr[i];
+ }
+
+ /* IRQ */
+ exynos4210_gcomp_raise_irq(&s->g_timer, i);
+ }
+ }
+
+ /* Reload FRC to reach nearest comparator */
+ s->g_timer.curr_comp = exynos4210_gcomp_find(s);
+ distance = exynos4210_gcomp_get_distance(s, s->g_timer.curr_comp);
+ if (distance > MCT_GT_COUNTER_STEP) {
+ distance = MCT_GT_COUNTER_STEP;
+ }
+ exynos4210_gfrc_set_count(&s->g_timer, distance);
+
+ exynos4210_gfrc_start(&s->g_timer);
+
+ return;
+}
+
+/*
+ * Get counter of FRC local timer.
+ */
+static uint64_t exynos4210_lfrc_get_count(exynos4210_mct_lt *s)
+{
+ return ptimer_get_count(s->ptimer_frc);
+}
+
+/*
+ * Set counter of FRC local timer.
+ */
+static void exynos4210_lfrc_update_count(exynos4210_mct_lt *s)
+{
+ if (!s->reg.cnt[L_REG_CNT_FRCCNTB]) {
+ ptimer_set_count(s->ptimer_frc, MCT_LT_COUNTER_STEP);
+ } else {
+ ptimer_set_count(s->ptimer_frc, s->reg.cnt[L_REG_CNT_FRCCNTB]);
+ }
+}
+
+/*
+ * Start local FRC timer
+ */
+static void exynos4210_lfrc_start(exynos4210_mct_lt *s)
+{
+ ptimer_run(s->ptimer_frc, 1);
+}
+
+/*
+ * Stop local FRC timer
+ */
+static void exynos4210_lfrc_stop(exynos4210_mct_lt *s)
+{
+ ptimer_stop(s->ptimer_frc);
+}
+
+/*
+ * Local timer free running counter tick handler
+ */
+static void exynos4210_lfrc_event(void *opaque)
+{
+ exynos4210_mct_lt * s = (exynos4210_mct_lt *)opaque;
+
+ /* local frc expired */
+
+ DPRINTF("\n");
+
+ s->reg.int_cstat |= L_INT_CSTAT_FRCCNT;
+
+ /* update frc counter */
+ exynos4210_lfrc_update_count(s);
+
+ /* raise irq */
+ if (s->reg.int_enb & L_INT_INTENB_FRCEIE) {
+ qemu_irq_raise(s->irq);
+ }
+
+ /* we reached here, this means that timer is enabled */
+ exynos4210_lfrc_start(s);
+}
+
+static uint32_t exynos4210_ltick_int_get_cnto(struct tick_timer *s);
+static uint32_t exynos4210_ltick_cnt_get_cnto(struct tick_timer *s);
+static void exynos4210_ltick_recalc_count(struct tick_timer *s);
+
+/*
+ * Action on enabling local tick int timer
+ */
+static void exynos4210_ltick_int_start(struct tick_timer *s)
+{
+ if (!s->int_run) {
+ s->int_run = 1;
+ }
+}
+
+/*
+ * Action on disabling local tick int timer
+ */
+static void exynos4210_ltick_int_stop(struct tick_timer *s)
+{
+ if (s->int_run) {
+ s->last_icnto = exynos4210_ltick_int_get_cnto(s);
+ s->int_run = 0;
+ }
+}
+
+/*
+ * Get count for INT timer
+ */
+static uint32_t exynos4210_ltick_int_get_cnto(struct tick_timer *s)
+{
+ uint32_t icnto;
+ uint64_t remain;
+ uint64_t count;
+ uint64_t counted;
+ uint64_t cur_progress;
+
+ count = ptimer_get_count(s->ptimer_tick);
+ if (count) {
+ /* timer is still counting, called not from event */
+ counted = s->count - ptimer_get_count(s->ptimer_tick);
+ cur_progress = s->progress + counted;
+ } else {
+ /* timer expired earlier */
+ cur_progress = s->progress;
+ }
+
+ remain = s->distance - cur_progress;
+
+ if (!s->int_run) {
+ /* INT is stopped. */
+ icnto = s->last_icnto;
+ } else {
+ /* Both are counting */
+ icnto = remain / s->tcntb;
+ }
+
+ return icnto;
+}
+
+/*
+ * Start local tick cnt timer.
+ */
+static void exynos4210_ltick_cnt_start(struct tick_timer *s)
+{
+ if (!s->cnt_run) {
+
+ exynos4210_ltick_recalc_count(s);
+ ptimer_set_count(s->ptimer_tick, s->count);
+ ptimer_run(s->ptimer_tick, 1);
+
+ s->cnt_run = 1;
+ }
+}
+
+/*
+ * Stop local tick cnt timer.
+ */
+static void exynos4210_ltick_cnt_stop(struct tick_timer *s)
+{
+ if (s->cnt_run) {
+
+ s->last_tcnto = exynos4210_ltick_cnt_get_cnto(s);
+
+ if (s->int_run) {
+ exynos4210_ltick_int_stop(s);
+ }
+
+ ptimer_stop(s->ptimer_tick);
+
+ s->cnt_run = 0;
+ }
+}
+
+/*
+ * Get counter for CNT timer
+ */
+static uint32_t exynos4210_ltick_cnt_get_cnto(struct tick_timer *s)
+{
+ uint32_t tcnto;
+ uint32_t icnto;
+ uint64_t remain;
+ uint64_t counted;
+ uint64_t count;
+ uint64_t cur_progress;
+
+ count = ptimer_get_count(s->ptimer_tick);
+ if (count) {
+ /* timer is still counting, called not from event */
+ counted = s->count - ptimer_get_count(s->ptimer_tick);
+ cur_progress = s->progress + counted;
+ } else {
+ /* timer expired earlier */
+ cur_progress = s->progress;
+ }
+
+ remain = s->distance - cur_progress;
+
+ if (!s->cnt_run) {
+ /* Both are stopped. */
+ tcnto = s->last_tcnto;
+ } else if (!s->int_run) {
+ /* INT counter is stopped, progress is by CNT timer */
+ tcnto = remain % s->tcntb;
+ } else {
+ /* Both are counting */
+ icnto = remain / s->tcntb;
+ if (icnto) {
+ tcnto = remain % (icnto * s->tcntb);
+ } else {
+ tcnto = remain % s->tcntb;
+ }
+ }
+
+ return tcnto;
+}
+
+/*
+ * Set new values of counters for CNT and INT timers
+ */
+static void exynos4210_ltick_set_cntb(struct tick_timer *s, uint32_t new_cnt,
+ uint32_t new_int)
+{
+ uint32_t cnt_stopped = 0;
+ uint32_t int_stopped = 0;
+
+ if (s->cnt_run) {
+ exynos4210_ltick_cnt_stop(s);
+ cnt_stopped = 1;
+ }
+
+ if (s->int_run) {
+ exynos4210_ltick_int_stop(s);
+ int_stopped = 1;
+ }
+
+ s->tcntb = new_cnt + 1;
+ s->icntb = new_int + 1;
+
+ if (cnt_stopped) {
+ exynos4210_ltick_cnt_start(s);
+ }
+ if (int_stopped) {
+ exynos4210_ltick_int_start(s);
+ }
+
+}
+
+/*
+ * Calculate new counter value for tick timer
+ */
+static void exynos4210_ltick_recalc_count(struct tick_timer *s)
+{
+ uint64_t to_count;
+
+ if ((s->cnt_run && s->last_tcnto) || (s->int_run && s->last_icnto)) {
+ /*
+ * one or both timers run and not counted to the end;
+ * distance is not passed, recalculate with last_tcnto * last_icnto
+ */
+
+ if (s->last_tcnto) {
+ to_count = s->last_tcnto * s->last_icnto;
+ } else {
+ to_count = s->last_icnto;
+ }
+ } else {
+ /* distance is passed, recalculate with tcnto * icnto */
+ if (s->icntb) {
+ s->distance = s->tcntb * s->icntb;
+ } else {
+ s->distance = s->tcntb;
+ }
+
+ to_count = s->distance;
+ s->progress = 0;
+ }
+
+ if (to_count > MCT_LT_COUNTER_STEP) {
+ /* count by step */
+ s->count = MCT_LT_COUNTER_STEP;
+ } else {
+ s->count = to_count;
+ }
+}
+
+/*
+ * Initialize tick_timer
+ */
+static void exynos4210_ltick_timer_init(struct tick_timer *s)
+{
+ exynos4210_ltick_int_stop(s);
+ exynos4210_ltick_cnt_stop(s);
+
+ s->count = 0;
+ s->distance = 0;
+ s->progress = 0;
+ s->icntb = 0;
+ s->tcntb = 0;
+}
+
+/*
+ * tick_timer event.
+ * Raises when abstract tick_timer expires.
+ */
+static void exynos4210_ltick_timer_event(struct tick_timer *s)
+{
+ s->progress += s->count;
+}
+
+/*
+ * Local timer tick counter handler.
+ * Don't use reloaded timers. If timer counter = zero
+ * then handler called but after handler finished no
+ * timer reload occurs.
+ */
+static void exynos4210_ltick_event(void *opaque)
+{
+ exynos4210_mct_lt * s = (exynos4210_mct_lt *)opaque;
+ uint32_t tcnto;
+ uint32_t icnto;
+#ifdef DEBUG_MCT
+ static uint64_t time1[2] = {0};
+ static uint64_t time2[2] = {0};
+#endif
+
+ /* Call tick_timer event handler, it will update it's tcntb and icntb */
+ exynos4210_ltick_timer_event(&s->tick_timer);
+
+ /* get tick_timer cnt */
+ tcnto = exynos4210_ltick_cnt_get_cnto(&s->tick_timer);
+
+ /* get tick_timer int */
+ icnto = exynos4210_ltick_int_get_cnto(&s->tick_timer);
+
+ /* raise IRQ if needed */
+ if (!icnto && s->reg.tcon & L_TCON_INT_START) {
+ /* INT counter enabled and expired */
+
+ s->reg.int_cstat |= L_INT_CSTAT_INTCNT;
+
+ /* raise interrupt if enabled */
+ if (s->reg.int_enb & L_INT_INTENB_ICNTEIE) {
+#ifdef DEBUG_MCT
+ time2[s->id] = qemu_get_clock_ns(vm_clock);
+ DPRINTF("local timer[%d] IRQ: %llx\n", s->id,
+ time2[s->id] - time1[s->id]);
+ time1[s->id] = time2[s->id];
+#endif
+ qemu_irq_raise(s->irq);
+ }
+
+ /* reload ICNTB */
+ if (s->reg.tcon & L_TCON_INTERVAL_MODE) {
+ exynos4210_ltick_set_cntb(&s->tick_timer,
+ s->reg.cnt[L_REG_CNT_TCNTB],
+ s->reg.cnt[L_REG_CNT_ICNTB]);
+ }
+ } else {
+ /* reload TCNTB */
+ if (!tcnto) {
+ exynos4210_ltick_set_cntb(&s->tick_timer,
+ s->reg.cnt[L_REG_CNT_TCNTB],
+ icnto);
+ }
+ }
+
+ /* start tick_timer cnt */
+ exynos4210_ltick_cnt_start(&s->tick_timer);
+
+ /* start tick_timer int */
+ exynos4210_ltick_int_start(&s->tick_timer);
+}
+
+/* update timer frequency */
+static void exynos4210_mct_update_freq(Exynos4210MCTState *s)
+{
+ uint32_t freq = s->freq;
+ s->freq = 24000000 /
+ ((MCT_CFG_GET_PRESCALER(s->reg_mct_cfg)+1) *
+ MCT_CFG_GET_DIVIDER(s->reg_mct_cfg));
+
+ if (freq != s->freq) {
+ DPRINTF("freq=%dHz\n", s->freq);
+
+ /* global timer */
+ ptimer_set_freq(s->g_timer.ptimer_frc, s->freq);
+
+ /* local timer */
+ ptimer_set_freq(s->l_timer[0].tick_timer.ptimer_tick, s->freq);
+ ptimer_set_freq(s->l_timer[0].ptimer_frc, s->freq);
+ ptimer_set_freq(s->l_timer[1].tick_timer.ptimer_tick, s->freq);
+ ptimer_set_freq(s->l_timer[1].ptimer_frc, s->freq);
+ }
+}
+
+/* set defaul_timer values for all fields */
+static void exynos4210_mct_reset(DeviceState *d)
+{
+ Exynos4210MCTState *s = (Exynos4210MCTState *)d;
+ uint32_t i;
+
+ s->reg_mct_cfg = 0;
+
+ /* global timer */
+ memset(&s->g_timer.reg, 0, sizeof(s->g_timer.reg));
+ exynos4210_gfrc_stop(&s->g_timer);
+
+ /* local timer */
+ memset(s->l_timer[0].reg.cnt, 0, sizeof(s->l_timer[0].reg.cnt));
+ memset(s->l_timer[1].reg.cnt, 0, sizeof(s->l_timer[1].reg.cnt));
+ for (i = 0; i < 2; i++) {
+ s->l_timer[i].reg.int_cstat = 0;
+ s->l_timer[i].reg.int_enb = 0;
+ s->l_timer[i].reg.tcon = 0;
+ s->l_timer[i].reg.wstat = 0;
+ s->l_timer[i].tick_timer.count = 0;
+ s->l_timer[i].tick_timer.distance = 0;
+ s->l_timer[i].tick_timer.progress = 0;
+ ptimer_stop(s->l_timer[i].ptimer_frc);
+
+ exynos4210_ltick_timer_init(&s->l_timer[i].tick_timer);
+ }
+
+ exynos4210_mct_update_freq(s);
+
+}
+
+/* Multi Core Timer read */
+static uint64_t exynos4210_mct_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210MCTState *s = (Exynos4210MCTState *)opaque;
+ int index;
+ int shift;
+ uint64_t count;
+ uint32_t value;
+ int lt_i;
+
+ switch (offset) {
+
+ case MCT_CFG:
+ value = s->reg_mct_cfg;
+ break;
+
+ case G_CNT_L: case G_CNT_U:
+ shift = 8 * (offset & 0x4);
+ count = exynos4210_gfrc_get_count(&s->g_timer);
+ value = UINT32_MAX & (count >> shift);
+ DPRINTF("read FRC=0x%llx\n", count);
+ break;
+
+ case G_CNT_WSTAT:
+ value = s->g_timer.reg.cnt_wstat;
+ break;
+
+ case G_COMP_L(0): case G_COMP_L(1): case G_COMP_L(2): case G_COMP_L(3):
+ case G_COMP_U(0): case G_COMP_U(1): case G_COMP_U(2): case G_COMP_U(3):
+ index = GET_G_COMP_IDX(offset);
+ shift = 8 * (offset & 0x4);
+ value = UINT32_MAX & (s->g_timer.reg.comp[index] >> shift);
+ break;
+
+ case G_TCON:
+ value = s->g_timer.reg.tcon;
+ break;
+
+ case G_INT_CSTAT:
+ value = s->g_timer.reg.int_cstat;
+ break;
+
+ case G_INT_ENB:
+ value = s->g_timer.reg.int_enb;
+ break;
+ break;
+ case G_WSTAT:
+ value = s->g_timer.reg.wstat;
+ break;
+
+ case G_COMP0_ADD_INCR: case G_COMP1_ADD_INCR:
+ case G_COMP2_ADD_INCR: case G_COMP3_ADD_INCR:
+ value = s->g_timer.reg.comp_add_incr[GET_G_COMP_ADD_INCR_IDX(offset)];
+ break;
+
+ /* Local timers */
+ case L0_TCNTB: case L0_ICNTB: case L0_FRCNTB:
+ case L1_TCNTB: case L1_ICNTB: case L1_FRCNTB:
+ lt_i = GET_L_TIMER_IDX(offset);
+ index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
+ value = s->l_timer[lt_i].reg.cnt[index];
+ break;
+
+ case L0_TCNTO: case L1_TCNTO:
+ lt_i = GET_L_TIMER_IDX(offset);
+
+ value = exynos4210_ltick_cnt_get_cnto(&s->l_timer[lt_i].tick_timer);
+ DPRINTF("local timer[%d] read TCNTO %x\n", lt_i, value);
+ break;
+
+ case L0_ICNTO: case L1_ICNTO:
+ lt_i = GET_L_TIMER_IDX(offset);
+
+ value = exynos4210_ltick_int_get_cnto(&s->l_timer[lt_i].tick_timer);
+ DPRINTF("local timer[%d] read ICNTO %x\n", lt_i, value);
+ break;
+
+ case L0_FRCNTO: case L1_FRCNTO:
+ lt_i = GET_L_TIMER_IDX(offset);
+
+ value = exynos4210_lfrc_get_count(&s->l_timer[lt_i]);
+
+ break;
+
+ case L0_TCON: case L1_TCON:
+ lt_i = ((offset & 0xF00) - L0_TCNTB) / 0x100;
+ value = s->l_timer[lt_i].reg.tcon;
+ break;
+
+ case L0_INT_CSTAT: case L1_INT_CSTAT:
+ lt_i = ((offset & 0xF00) - L0_TCNTB) / 0x100;
+ value = s->l_timer[lt_i].reg.int_cstat;
+ break;
+
+ case L0_INT_ENB: case L1_INT_ENB:
+ lt_i = ((offset & 0xF00) - L0_TCNTB) / 0x100;
+ value = s->l_timer[lt_i].reg.int_enb;
+ break;
+
+ case L0_WSTAT: case L1_WSTAT:
+ lt_i = ((offset & 0xF00) - L0_TCNTB) / 0x100;
+ value = s->l_timer[lt_i].reg.wstat;
+ break;
+
+ default:
+ hw_error("exynos4210.mct: bad read offset "
+ TARGET_FMT_plx "\n", offset);
+ break;
+ }
+ return value;
+}
+
+/* MCT write */
+static void exynos4210_mct_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ Exynos4210MCTState *s = (Exynos4210MCTState *)opaque;
+ int index; /* index in buffer which represents register set */
+ int shift;
+ int lt_i;
+ uint64_t new_frc;
+ uint32_t i;
+ uint32_t old_val;
+#ifdef DEBUG_MCT
+ static uint32_t icntb_max[2] = {0};
+ static uint32_t icntb_min[2] = {UINT32_MAX, UINT32_MAX};
+ static uint32_t tcntb_max[2] = {0};
+ static uint32_t tcntb_min[2] = {UINT32_MAX, UINT32_MAX};
+#endif
+
+ new_frc = s->g_timer.reg.cnt;
+
+ switch (offset) {
+
+ case MCT_CFG:
+ s->reg_mct_cfg = value;
+ exynos4210_mct_update_freq(s);
+ break;
+
+ case G_CNT_L:
+ case G_CNT_U:
+ if (offset == G_CNT_L) {
+
+ DPRINTF("global timer write to reg.cntl %llx\n", value);
+
+ new_frc = (s->g_timer.reg.cnt & (uint64_t)UINT32_MAX << 32) + value;
+ s->g_timer.reg.cnt_wstat |= G_CNT_WSTAT_L;
+ }
+ if (offset == G_CNT_U) {
+
+ DPRINTF("global timer write to reg.cntu %llx\n", value);
+
+ new_frc = (s->g_timer.reg.cnt & UINT32_MAX) +
+ ((uint64_t)value << 32);
+ s->g_timer.reg.cnt_wstat |= G_CNT_WSTAT_U;
+ }
+
+ s->g_timer.reg.cnt = new_frc;
+ exynos4210_gfrc_restart(s);
+ break;
+
+ case G_CNT_WSTAT:
+ s->g_timer.reg.cnt_wstat &= ~(value);
+ break;
+
+ case G_COMP_L(0): case G_COMP_L(1): case G_COMP_L(2): case G_COMP_L(3):
+ case G_COMP_U(0): case G_COMP_U(1): case G_COMP_U(2): case G_COMP_U(3):
+ index = GET_G_COMP_IDX(offset);
+ shift = 8 * (offset & 0x4);
+ s->g_timer.reg.comp[index] =
+ (s->g_timer.reg.comp[index] &
+ (((uint64_t)UINT32_MAX << 32) >> shift)) +
+ (value << shift);
+
+ DPRINTF("comparator %d write 0x%llx val << %d\n", index, value, shift);
+
+ if (offset&0x4) {
+ s->g_timer.reg.wstat |= G_WSTAT_COMP_U(index);
+ } else {
+ s->g_timer.reg.wstat |= G_WSTAT_COMP_L(index);
+ }
+
+ exynos4210_gfrc_restart(s);
+ break;
+
+ case G_TCON:
+ old_val = s->g_timer.reg.tcon;
+ s->g_timer.reg.tcon = value;
+ s->g_timer.reg.wstat |= G_WSTAT_TCON_WRITE;
+
+ DPRINTF("global timer write to reg.g_tcon %llx\n", value);
+
+ /* Start FRC if transition from disabled to enabled */
+ if ((value & G_TCON_TIMER_ENABLE) > (old_val &
+ G_TCON_TIMER_ENABLE)) {
+ exynos4210_gfrc_start(&s->g_timer);
+ }
+ if ((value & G_TCON_TIMER_ENABLE) < (old_val &
+ G_TCON_TIMER_ENABLE)) {
+ exynos4210_gfrc_stop(&s->g_timer);
+ }
+
+ /* Start CMP if transition from disabled to enabled */
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+ if ((value & G_TCON_COMP_ENABLE(i)) != (old_val &
+ G_TCON_COMP_ENABLE(i))) {
+ exynos4210_gfrc_restart(s);
+ }
+ }
+ break;
+
+ case G_INT_CSTAT:
+ s->g_timer.reg.int_cstat &= ~(value);
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+ if (value & G_INT_CSTAT_COMP(i)) {
+ exynos4210_gcomp_lower_irq(&s->g_timer, i);
+ }
+ }
+ break;
+
+ case G_INT_ENB:
+
+ /* Raise IRQ if transition from disabled to enabled and CSTAT pending */
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+ if ((value & G_INT_ENABLE(i)) > (s->g_timer.reg.tcon &
+ G_INT_ENABLE(i))) {
+ if (s->g_timer.reg.int_cstat & G_INT_CSTAT_COMP(i)) {
+ exynos4210_gcomp_raise_irq(&s->g_timer, i);
+ }
+ }
+
+ if ((value & G_INT_ENABLE(i)) < (s->g_timer.reg.tcon &
+ G_INT_ENABLE(i))) {
+ exynos4210_gcomp_lower_irq(&s->g_timer, i);
+ }
+ }
+
+ DPRINTF("global timer INT enable %llx\n", value);
+ s->g_timer.reg.int_enb = value;
+ break;
+
+ case G_WSTAT:
+ s->g_timer.reg.wstat &= ~(value);
+ break;
+
+ case G_COMP0_ADD_INCR: case G_COMP1_ADD_INCR:
+ case G_COMP2_ADD_INCR: case G_COMP3_ADD_INCR:
+ index = GET_G_COMP_ADD_INCR_IDX(offset);
+ s->g_timer.reg.comp_add_incr[index] = value;
+ s->g_timer.reg.wstat |= G_WSTAT_COMP_ADDINCR(index);
+ break;
+
+ /* Local timers */
+ case L0_TCON: case L1_TCON:
+ lt_i = GET_L_TIMER_IDX(offset);
+ old_val = s->l_timer[lt_i].reg.tcon;
+
+ s->l_timer[lt_i].reg.wstat |= L_WSTAT_TCON_WRITE;
+ s->l_timer[lt_i].reg.tcon = value;
+
+ /* Stop local CNT */
+ if ((value & L_TCON_TICK_START) <
+ (old_val & L_TCON_TICK_START)) {
+ DPRINTF("local timer[%d] stop cnt\n", lt_i);
+ exynos4210_ltick_cnt_stop(&s->l_timer[lt_i].tick_timer);
+ }
+
+ /* Stop local INT */
+ if ((value & L_TCON_INT_START) <
+ (old_val & L_TCON_INT_START)) {
+ DPRINTF("local timer[%d] stop int\n", lt_i);
+ exynos4210_ltick_int_stop(&s->l_timer[lt_i].tick_timer);
+ }
+
+ /* Start local CNT */
+ if ((value & L_TCON_TICK_START) >
+ (old_val & L_TCON_TICK_START)) {
+ DPRINTF("local timer[%d] start cnt\n", lt_i);
+ exynos4210_ltick_cnt_start(&s->l_timer[lt_i].tick_timer);
+ }
+
+ /* Start local INT */
+ if ((value & L_TCON_INT_START) >
+ (old_val & L_TCON_INT_START)) {
+ DPRINTF("local timer[%d] start int\n", lt_i);
+ exynos4210_ltick_int_start(&s->l_timer[lt_i].tick_timer);
+ }
+
+ /* Start or Stop local FRC if TCON changed */
+ if ((value & L_TCON_FRC_START) >
+ (s->l_timer[lt_i].reg.tcon & L_TCON_FRC_START)) {
+ DPRINTF("local timer[%d] start frc\n", lt_i);
+ exynos4210_lfrc_start(&s->l_timer[lt_i]);
+ }
+ if ((value & L_TCON_FRC_START) <
+ (s->l_timer[lt_i].reg.tcon & L_TCON_FRC_START)) {
+ DPRINTF("local timer[%d] stop frc\n", lt_i);
+ exynos4210_lfrc_stop(&s->l_timer[lt_i]);
+ }
+ break;
+
+ case L0_TCNTB: case L1_TCNTB:
+
+ lt_i = GET_L_TIMER_IDX(offset);
+ index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
+
+ /*
+ * TCNTB is updated to internal register only after CNT expired.
+ * Due to this we should reload timer to nearest moment when CNT is
+ * expired and then in event handler update tcntb to new TCNTB value.
+ */
+ exynos4210_ltick_set_cntb(&s->l_timer[lt_i].tick_timer, value,
+ s->l_timer[lt_i].tick_timer.icntb);
+
+ s->l_timer[lt_i].reg.wstat |= L_WSTAT_TCNTB_WRITE;
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_TCNTB] = value;
+
+#ifdef DEBUG_MCT
+ if (tcntb_min[lt_i] > value) {
+ tcntb_min[lt_i] = value;
+ }
+ if (tcntb_max[lt_i] < value) {
+ tcntb_max[lt_i] = value;
+ }
+ DPRINTF("local timer[%d] TCNTB write %llx; max=%x, min=%x\n",
+ lt_i, value, tcntb_max[lt_i], tcntb_min[lt_i]);
+#endif
+ break;
+
+ case L0_ICNTB: case L1_ICNTB:
+
+ lt_i = GET_L_TIMER_IDX(offset);
+ index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
+
+ s->l_timer[lt_i].reg.wstat |= L_WSTAT_ICNTB_WRITE;
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_ICNTB] = value &
+ ~L_ICNTB_MANUAL_UPDATE;
+
+ /*
+ * We need to avoid too small values for TCNTB*ICNTB. If not, IRQ event
+ * could raise too fast disallowing QEMU to execute target code.
+ */
+ if (s->l_timer[lt_i].reg.cnt[L_REG_CNT_ICNTB] *
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_TCNTB] < MCT_LT_CNT_LOW_LIMIT) {
+ if (!s->l_timer[lt_i].reg.cnt[L_REG_CNT_TCNTB]) {
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_ICNTB] =
+ MCT_LT_CNT_LOW_LIMIT;
+ } else {
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_ICNTB] =
+ MCT_LT_CNT_LOW_LIMIT /
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_TCNTB];
+ }
+ }
+
+ if (value & L_ICNTB_MANUAL_UPDATE) {
+ exynos4210_ltick_set_cntb(&s->l_timer[lt_i].tick_timer,
+ s->l_timer[lt_i].tick_timer.tcntb,
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_ICNTB]);
+ }
+
+#ifdef DEBUG_MCT
+ if (icntb_min[lt_i] > value) {
+ icntb_min[lt_i] = value;
+ }
+ if (icntb_max[lt_i] < value) {
+ icntb_max[lt_i] = value;
+ }
+DPRINTF("local timer[%d] ICNTB write %llx; max=%x, min=%x\n\n",
+ lt_i, value, icntb_max[lt_i], icntb_min[lt_i]);
+#endif
+break;
+
+ case L0_FRCNTB: case L1_FRCNTB:
+
+ lt_i = GET_L_TIMER_IDX(offset);
+ index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
+
+ DPRINTF("local timer[%d] FRCNTB write %llx\n", lt_i, value);
+
+ s->l_timer[lt_i].reg.wstat |= L_WSTAT_FRCCNTB_WRITE;
+ s->l_timer[lt_i].reg.cnt[L_REG_CNT_FRCCNTB] = value;
+
+ break;
+
+ case L0_TCNTO: case L1_TCNTO:
+ case L0_ICNTO: case L1_ICNTO:
+ case L0_FRCNTO: case L1_FRCNTO:
+ fprintf(stderr, "\n[exynos4210.mct: write to RO register "
+ TARGET_FMT_plx "]\n\n", offset);
+ break;
+
+ case L0_INT_CSTAT: case L1_INT_CSTAT:
+ lt_i = GET_L_TIMER_IDX(offset);
+
+ DPRINTF("local timer[%d] CSTAT write %llx\n", lt_i, value);
+
+ s->l_timer[lt_i].reg.int_cstat &= ~value;
+ if (!s->l_timer[lt_i].reg.int_cstat) {
+ qemu_irq_lower(s->l_timer[lt_i].irq);
+ }
+ break;
+
+ case L0_INT_ENB: case L1_INT_ENB:
+ lt_i = GET_L_TIMER_IDX(offset);
+ old_val = s->l_timer[lt_i].reg.int_enb;
+
+ /* Raise Local timer IRQ if cstat is pending */
+ if ((value & L_INT_INTENB_ICNTEIE) > (old_val & L_INT_INTENB_ICNTEIE)) {
+ if (s->l_timer[lt_i].reg.int_cstat & L_INT_CSTAT_INTCNT) {
+ qemu_irq_raise(s->l_timer[lt_i].irq);
+ }
+ }
+
+ s->l_timer[lt_i].reg.int_enb = value;
+
+ break;
+
+ case L0_WSTAT: case L1_WSTAT:
+ lt_i = GET_L_TIMER_IDX(offset);
+
+ s->l_timer[lt_i].reg.wstat &= ~value;
+ break;
+
+ default:
+ hw_error("exynos4210.mct: bad write offset "
+ TARGET_FMT_plx "\n", offset);
+ break;
+ }
+}
+
+static const MemoryRegionOps exynos4210_mct_ops = {
+ .read = exynos4210_mct_read,
+ .write = exynos4210_mct_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+/* MCT init */
+static int exynos4210_mct_init(SysBusDevice *dev)
+{
+ int i;
+ Exynos4210MCTState *s = FROM_SYSBUS(Exynos4210MCTState, dev);
+ QEMUBH *bh[2];
+
+ /* Global timer */
+ bh[0] = qemu_bh_new(exynos4210_gfrc_event, s);
+ s->g_timer.ptimer_frc = ptimer_init(bh[0]);
+ memset(&s->g_timer.reg, 0, sizeof(struct gregs));
+
+ /* Local timers */
+ for (i = 0; i < 2; i++) {
+ bh[0] = qemu_bh_new(exynos4210_ltick_event, &s->l_timer[i]);
+ bh[1] = qemu_bh_new(exynos4210_lfrc_event, &s->l_timer[i]);
+ s->l_timer[i].tick_timer.ptimer_tick = ptimer_init(bh[0]);
+ s->l_timer[i].ptimer_frc = ptimer_init(bh[1]);
+ s->l_timer[i].id = i;
+ }
+
+ /* IRQs */
+ for (i = 0; i < MCT_GT_CMP_NUM; i++) {
+ sysbus_init_irq(dev, &s->g_timer.irq[i]);
+ }
+ for (i = 0; i < 2; i++) {
+ sysbus_init_irq(dev, &s->l_timer[i].irq);
+ }
+
+ memory_region_init_io(&s->iomem, &exynos4210_mct_ops, s, "exynos4210-mct",
+ MCT_SFR_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_mct_info = {
+ .qdev.name = "exynos4210.mct",
+ .qdev.size = sizeof(struct Exynos4210MCTState),
+ .qdev.reset = exynos4210_mct_reset,
+ .qdev.vmsd = &VMState_Exynos4210MCTState,
+ .init = exynos4210_mct_init,
+};
+
+static void exynos4210_mct_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_mct_info);
+}
+
+device_init(exynos4210_mct_register_devices)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (5 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 6/9] ARM: exynos4210: MCT support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-25 16:35 ` Peter Maydell
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 8/9] hw/exynos4210.c: Add LAN support for SMDKC210 Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 9/9] Exynos4210: added display controller implementation Evgeny Voevodin
8 siblings, 1 reply; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
---
hw/lan9118.c | 122 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 117 insertions(+), 5 deletions(-)
diff --git a/hw/lan9118.c b/hw/lan9118.c
index 9b199d0..d5e1551 100644
--- a/hw/lan9118.c
+++ b/hw/lan9118.c
@@ -235,6 +235,16 @@ typedef struct {
int32_t rxp_offset;
int32_t rxp_size;
int32_t rxp_pad;
+
+ uint32_t write_word_prev_offset;
+ uint32_t write_word_n;
+ uint16_t write_word_l;
+ uint16_t write_word_h;
+ uint32_t read_word_prev_offset;
+ uint32_t read_word_n;
+ uint32_t read_long;
+
+ uint32_t mode_16bit;
} lan9118_state;
static const VMStateDescription vmstate_lan9118 = {
@@ -294,6 +304,14 @@ static const VMStateDescription vmstate_lan9118 = {
VMSTATE_INT32(rxp_offset, lan9118_state),
VMSTATE_INT32(rxp_size, lan9118_state),
VMSTATE_INT32(rxp_pad, lan9118_state),
+ VMSTATE_UINT32(write_word_prev_offset, lan9118_state),
+ VMSTATE_UINT32(write_word_n, lan9118_state),
+ VMSTATE_UINT16(write_word_l, lan9118_state),
+ VMSTATE_UINT16(write_word_h, lan9118_state),
+ VMSTATE_UINT32(read_word_prev_offset, lan9118_state),
+ VMSTATE_UINT32(read_word_n, lan9118_state),
+ VMSTATE_UINT32(read_long, lan9118_state),
+ VMSTATE_UINT32(mode_16bit, lan9118_state),
VMSTATE_END_OF_LIST()
}
};
@@ -390,7 +408,7 @@ static void lan9118_reset(DeviceState *d)
s->fifo_int = 0x48000000;
s->rx_cfg = 0;
s->tx_cfg = 0;
- s->hw_cfg = 0x00050000;
+ s->hw_cfg = s->mode_16bit ? 0x00050000 : 0x00050004;
s->pmt_ctrl &= 0x45;
s->gpio_cfg = 0;
s->txp->fifo_used = 0;
@@ -429,6 +447,9 @@ static void lan9118_reset(DeviceState *d)
s->mac_mii_data = 0;
s->mac_flow = 0;
+ s->read_word_n = 0;
+ s->write_word_n = 0;
+
phy_reset(s);
s->eeprom_writable = 0;
@@ -984,7 +1005,7 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
{
lan9118_state *s = (lan9118_state *)opaque;
offset &= 0xff;
-
+
//DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
if (offset >= 0x20 && offset < 0x40) {
/* TX FIFO */
@@ -1034,7 +1055,7 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
/* SRST */
lan9118_reset(&s->busdev.qdev);
} else {
- s->hw_cfg = val & 0x003f300;
+ s->hw_cfg = (val & 0x003f300) | (s->hw_cfg & 0x4);
}
break;
case CSR_RX_DP_CTRL:
@@ -1113,6 +1134,46 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
lan9118_update(s);
}
+static void lan9118_writew(void *opaque, target_phys_addr_t offset,
+ uint32_t val)
+{
+ lan9118_state *s = (lan9118_state *)opaque;
+ offset &= 0xff;
+
+ if (s->write_word_prev_offset != (offset & ~0x3)) {
+ /* New offset, reset word counter */
+ s->write_word_n = 0;
+ s->write_word_prev_offset = offset & ~0x3;
+ }
+
+ if (offset & 0x2) {
+ s->write_word_h = val;
+ } else {
+ s->write_word_l = val;
+ }
+
+ //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val);
+ s->write_word_n++;
+ if (s->write_word_n == 2) {
+ s->write_word_n = 0;
+ lan9118_writel(s, offset & ~3, s->write_word_l +
+ (s->write_word_h << 16), 4);
+ }
+}
+
+static void lan9118_16bit_mode_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ switch (size) {
+ case 2:
+ return lan9118_writew(opaque, offset, (uint32_t)val);
+ case 4:
+ return lan9118_writel(opaque, offset, val, size);
+ }
+
+ hw_error("lan9118_write: Bad size 0x%x\n", size);
+}
+
static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
unsigned size)
{
@@ -1149,7 +1210,7 @@ static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
case CSR_TX_CFG:
return s->tx_cfg;
case CSR_HW_CFG:
- return s->hw_cfg | 0x4;
+ return s->hw_cfg;
case CSR_RX_DP_CTRL:
return 0;
case CSR_RX_FIFO_INF:
@@ -1187,12 +1248,60 @@ static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
return 0;
}
+static uint32_t lan9118_readw(void *opaque, target_phys_addr_t offset)
+{
+ lan9118_state *s = (lan9118_state *)opaque;
+ uint32_t val;
+
+ if (s->read_word_prev_offset != (offset & ~0x3)) {
+ /* New offset, reset word counter */
+ s->read_word_n = 0;
+ s->read_word_prev_offset = offset & ~0x3;
+ }
+
+ s->read_word_n++;
+ if (s->read_word_n == 1) {
+ s->read_long = lan9118_readl(s, offset & ~3, 4);
+ } else {
+ s->read_word_n = 0;
+ }
+
+ if (offset & 2) {
+ val = s->read_long >> 16;
+ } else {
+ val = s->read_long & 0xFFFF;
+ }
+
+ //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val);
+ return val;
+}
+
+static uint64_t lan9118_16bit_mode_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ switch (size) {
+ case 2:
+ return lan9118_readw(opaque, offset);
+ case 4:
+ return lan9118_readl(opaque, offset, size);
+ }
+
+ hw_error("lan9118_read: Bad size 0x%x\n", size);
+ return 0;
+}
+
static const MemoryRegionOps lan9118_mem_ops = {
.read = lan9118_readl,
.write = lan9118_writel,
.endianness = DEVICE_NATIVE_ENDIAN,
};
+static const MemoryRegionOps lan9118_16bit_mem_ops = {
+ .read = lan9118_16bit_mode_read,
+ .write = lan9118_16bit_mode_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
static void lan9118_cleanup(VLANClientState *nc)
{
lan9118_state *s = DO_UPCAST(NICState, nc, nc)->opaque;
@@ -1214,8 +1323,10 @@ static int lan9118_init1(SysBusDevice *dev)
lan9118_state *s = FROM_SYSBUS(lan9118_state, dev);
QEMUBH *bh;
int i;
+ const MemoryRegionOps *mem_ops =
+ s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops;
- memory_region_init_io(&s->mmio, &lan9118_mem_ops, s, "lan9118-mmio", 0x100);
+ memory_region_init_io(&s->mmio, mem_ops, s, "lan9118-mmio", 0x100);
sysbus_init_mmio(dev, &s->mmio);
sysbus_init_irq(dev, &s->irq);
qemu_macaddr_default_if_unset(&s->conf.macaddr);
@@ -1246,6 +1357,7 @@ static SysBusDeviceInfo lan9118_info = {
.qdev.vmsd = &vmstate_lan9118,
.qdev.props = (Property[]) {
DEFINE_NIC_PROPERTIES(lan9118_state, conf),
+ DEFINE_PROP_UINT32("mode_16bit", lan9118_state, mode_16bit, 0),
DEFINE_PROP_END_OF_LIST(),
}
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support.
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support Evgeny Voevodin
@ 2012-01-25 16:35 ` Peter Maydell
2012-01-25 17:04 ` Andreas Färber
0 siblings, 1 reply; 13+ messages in thread
From: Peter Maydell @ 2012-01-25 16:35 UTC (permalink / raw)
To: Evgeny Voevodin
Cc: kyungmin.park, m.kozlov, jehyung.lee, qemu-devel, d.solodkiy
On 20 January 2012 10:53, Evgeny Voevodin <e.voevodin@samsung.com> wrote:
> @@ -294,6 +304,14 @@ static const VMStateDescription vmstate_lan9118 = {
> VMSTATE_INT32(rxp_offset, lan9118_state),
> VMSTATE_INT32(rxp_size, lan9118_state),
> VMSTATE_INT32(rxp_pad, lan9118_state),
> + VMSTATE_UINT32(write_word_prev_offset, lan9118_state),
> + VMSTATE_UINT32(write_word_n, lan9118_state),
> + VMSTATE_UINT16(write_word_l, lan9118_state),
> + VMSTATE_UINT16(write_word_h, lan9118_state),
> + VMSTATE_UINT32(read_word_prev_offset, lan9118_state),
> + VMSTATE_UINT32(read_word_n, lan9118_state),
> + VMSTATE_UINT32(read_long, lan9118_state),
> + VMSTATE_UINT32(mode_16bit, lan9118_state),
> VMSTATE_END_OF_LIST()
You need to bump .version_id and make your new fields
VMSTATE_UINT32(write_word_prev_offset, lan9118_state, 2),
etc.
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support.
2012-01-25 16:35 ` Peter Maydell
@ 2012-01-25 17:04 ` Andreas Färber
2012-01-25 17:20 ` Peter Maydell
0 siblings, 1 reply; 13+ messages in thread
From: Andreas Färber @ 2012-01-25 17:04 UTC (permalink / raw)
To: Evgeny Voevodin
Cc: Peter Maydell, qemu-devel, kyungmin.park, d.solodkiy, m.kozlov,
jehyung.lee
Am 25.01.2012 17:35, schrieb Peter Maydell:
> On 20 January 2012 10:53, Evgeny Voevodin <e.voevodin@samsung.com> wrote:
>> @@ -294,6 +304,14 @@ static const VMStateDescription vmstate_lan9118 = {
>> VMSTATE_INT32(rxp_offset, lan9118_state),
>> VMSTATE_INT32(rxp_size, lan9118_state),
>> VMSTATE_INT32(rxp_pad, lan9118_state),
>> + VMSTATE_UINT32(write_word_prev_offset, lan9118_state),
>> + VMSTATE_UINT32(write_word_n, lan9118_state),
>> + VMSTATE_UINT16(write_word_l, lan9118_state),
>> + VMSTATE_UINT16(write_word_h, lan9118_state),
>> + VMSTATE_UINT32(read_word_prev_offset, lan9118_state),
>> + VMSTATE_UINT32(read_word_n, lan9118_state),
>> + VMSTATE_UINT32(read_long, lan9118_state),
>> + VMSTATE_UINT32(mode_16bit, lan9118_state),
>> VMSTATE_END_OF_LIST()
>
> You need to bump .version_id and make your new fields
> VMSTATE_UINT32(write_word_prev_offset, lan9118_state, 2),
VMSTATE_UINT32_V(write_word_prev_offset, lan9118_state, 2),
> etc.
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support.
2012-01-25 17:04 ` Andreas Färber
@ 2012-01-25 17:20 ` Peter Maydell
0 siblings, 0 replies; 13+ messages in thread
From: Peter Maydell @ 2012-01-25 17:20 UTC (permalink / raw)
To: Andreas Färber
Cc: Evgeny Voevodin, qemu-devel, kyungmin.park, d.solodkiy, m.kozlov,
jehyung.lee
On 25 January 2012 17:04, Andreas Färber <afaerber@suse.de> wrote:
> Am 25.01.2012 17:35, schrieb Peter Maydell:
>>
>> You need to bump .version_id and make your new fields
>> VMSTATE_UINT32(write_word_prev_offset, lan9118_state, 2),
>
> VMSTATE_UINT32_V(write_word_prev_offset, lan9118_state, 2),
Doh, yes.
-- PMM
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Qemu-devel] [PATCH v9 8/9] hw/exynos4210.c: Add LAN support for SMDKC210.
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (6 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 7/9] hw/lan9118: Add basic 16-bit mode support Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 9/9] Exynos4210: added display controller implementation Evgeny Voevodin
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: kyungmin.park, m.kozlov, jehyung.lee, d.solodkiy, Evgeny Voevodin
SMDKC210 uses lan9215 chip, but lan9118 in 16-bit mode seems to
be enough.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/exynos4_boards.c | 27 +++++++++++++++++++++++++--
1 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/hw/exynos4_boards.c b/hw/exynos4_boards.c
index 55fca06..8befe8b 100644
--- a/hw/exynos4_boards.c
+++ b/hw/exynos4_boards.c
@@ -23,6 +23,7 @@
#include "sysemu.h"
#include "sysbus.h"
+#include "net.h"
#include "arm-misc.h"
#include "exec-memory.h"
#include "exynos4210.h"
@@ -42,6 +43,8 @@
#define PRINT_DEBUG(fmt, args...) do {} while (0)
#endif
+#define SMDK_LAN9118_BASE_ADDR 0x05000000
+
typedef enum Exynos4BoardType {
EXYNOS4_BOARD_NURI,
EXYNOS4_BOARD_SMDKC210,
@@ -68,6 +71,24 @@ static struct arm_boot_info exynos4_board_binfo = {
.smp_loader_start = EXYNOS4210_SMP_BOOT_ADDR,
};
+static void lan9215_init(uint32_t base, qemu_irq irq)
+{
+ DeviceState *dev;
+ SysBusDevice *s;
+
+ /* This should be a 9215 but the 9118 is close enough */
+ if (nd_table[0].vlan) {
+ qemu_check_nic_model(&nd_table[0], "lan9118");
+ dev = qdev_create(NULL, "lan9118");
+ qdev_set_nic_properties(dev, &nd_table[0]);
+ qdev_prop_set_uint32(dev, "mode_16bit", 1);
+ qdev_init_nofail(dev);
+ s = sysbus_from_qdev(dev);
+ sysbus_mmio_map(s, 0, base);
+ sysbus_connect_irq(s, 0, irq);
+ }
+}
+
static Exynos4210State *exynos4_boards_init_common(
const char *kernel_filename,
const char *kernel_cmdline,
@@ -114,9 +135,11 @@ static void smdkc210_init(ram_addr_t ram_size,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
- exynos4_boards_init_common(kernel_filename, kernel_cmdline,
- initrd_filename, EXYNOS4_BOARD_SMDKC210);
+ Exynos4210State *s = exynos4_boards_init_common(kernel_filename,
+ kernel_cmdline, initrd_filename, EXYNOS4_BOARD_SMDKC210);
+ lan9215_init(SMDK_LAN9118_BASE_ADDR,
+ qemu_irq_invert(s->irq_table[exynos4210_get_irq(37, 1)]));
arm_load_kernel(first_cpu, &exynos4_board_binfo);
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [Qemu-devel] [PATCH v9 9/9] Exynos4210: added display controller implementation
2012-01-20 10:53 [Qemu-devel] [PATCH v9 0/9] ARM: Samsung Exynos4210-based boards support Evgeny Voevodin
` (7 preceding siblings ...)
2012-01-20 10:53 ` [Qemu-devel] [PATCH v9 8/9] hw/exynos4210.c: Add LAN support for SMDKC210 Evgeny Voevodin
@ 2012-01-20 10:53 ` Evgeny Voevodin
8 siblings, 0 replies; 13+ messages in thread
From: Evgeny Voevodin @ 2012-01-20 10:53 UTC (permalink / raw)
To: qemu-devel
Cc: Mitsyanko Igor, Evgeny Voevodin, kyungmin.park, d.solodkiy,
m.kozlov, jehyung.lee
From: Mitsyanko Igor <i.mitsyanko@samsung.com>
Exynos4210 display controller (FIMD) has 5 hardware windows with alpha and
chroma key blending functions.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
Makefile.target | 2 +-
hw/exynos4210.c | 10 +
hw/exynos4210_fimd.c | 1924 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1935 insertions(+), 1 deletions(-)
create mode 100644 hw/exynos4210_fimd.c
diff --git a/Makefile.target b/Makefile.target
index 24e7e99..5e314c6 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -341,7 +341,7 @@ obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
-obj-arm-y += exynos4210_pmu.o exynos4210_mct.o
+obj-arm-y += exynos4210_pmu.o exynos4210_mct.o exynos4210_fimd.o
obj-arm-y += arm_l2x0.o
obj-arm-y += arm_mptimer.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
diff --git a/hw/exynos4210.c b/hw/exynos4210.c
index aceec2a..7727578 100644
--- a/hw/exynos4210.c
+++ b/hw/exynos4210.c
@@ -58,6 +58,9 @@
/* PMU SFR base address */
#define EXYNOS4210_PMU_BASE_ADDR 0x10020000
+/* Display controllers (FIMD) */
+#define EXYNOS4210_FIMD0_BASE_ADDR 0x11C00000
+
static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43,
0x09, 0x00, 0x00, 0x00 };
@@ -258,5 +261,12 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
+ /*** Display controller (FIMD) ***/
+ sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
+ irq_table[exynos4210_get_irq(11, 0)],
+ irq_table[exynos4210_get_irq(11, 1)],
+ irq_table[exynos4210_get_irq(11, 2)],
+ NULL);
+
return s;
}
diff --git a/hw/exynos4210_fimd.c b/hw/exynos4210_fimd.c
new file mode 100644
index 0000000..7a749b2
--- /dev/null
+++ b/hw/exynos4210_fimd.c
@@ -0,0 +1,1924 @@
+/*
+ * Samsung exynos4210 Display Controller (FIMD)
+ *
+ * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd.
+ * All rights reserved.
+ * Based on LCD controller for Samsung S5PC1xx-based board emulation
+ * by Kirill Batuzov <batuzovk@ispras.ru>
+ *
+ * Contributed by Mitsyanko Igor <i.mitsyanko@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu-common.h"
+#include "cpu-all.h"
+#include "sysbus.h"
+#include "console.h"
+#include "pixel_ops.h"
+#include "bswap.h"
+
+/* Debug messages configuration */
+#define EXYNOS4210_FIMD_DEBUG 0
+#define EXYNOS4210_FIMD_MODE_TRACE 0
+
+#if EXYNOS4210_FIMD_DEBUG == 0
+ #define DPRINT_L1(fmt, args...) do { } while (0)
+ #define DPRINT_L2(fmt, args...) do { } while (0)
+ #define DPRINT_ERROR(fmt, args...) do { } while (0)
+#elif EXYNOS4210_FIMD_DEBUG == 1
+ #define DPRINT_L1(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD: "fmt, ## args); } while (0)
+ #define DPRINT_L2(fmt, args...) do { } while (0)
+ #define DPRINT_ERROR(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD ERROR: "fmt, ## args); } while (0)
+#else
+ #define DPRINT_L1(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD: "fmt, ## args); } while (0)
+ #define DPRINT_L2(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD: "fmt, ## args); } while (0)
+ #define DPRINT_ERROR(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD ERROR: "fmt, ## args); } while (0)
+#endif
+
+#if EXYNOS4210_FIMD_MODE_TRACE == 0
+ #define DPRINT_TRACE(fmt, args...) do { } while (0)
+#else
+ #define DPRINT_TRACE(fmt, args...) \
+ do {fprintf(stderr, "QEMU FIMD: "fmt, ## args); } while (0)
+#endif
+
+#define NUM_OF_WINDOWS 5
+#define FIMD_REGS_SIZE 0x4114
+
+/* Video main control registers */
+#define FIMD_VIDCON0 0x0000
+#define FIMD_VIDCON1 0x0004
+#define FIMD_VIDCON2 0x0008
+#define FIMD_VIDCON3 0x000C
+#define FIMD_VIDCON0_ENVID_F (1 << 0)
+#define FIMD_VIDCON0_ENVID (1 << 1)
+#define FIMD_VIDCON0_ENVID_MASK ((1 << 0) | (1 << 1))
+#define FIMD_VIDCON1_ROMASK 0x07FFE000
+
+/* Video time control registers */
+#define FIMD_VIDTCON_START 0x10
+#define FIMD_VIDTCON_END 0x1C
+#define FIMD_VIDTCON2_SIZE_MASK 0x07FF
+#define FIMD_VIDTCON2_HOR_SHIFT 0
+#define FIMD_VIDTCON2_VER_SHIFT 11
+
+/* Window control registers */
+#define FIMD_WINCON_START 0x0020
+#define FIMD_WINCON_END 0x0030
+#define FIMD_WINCON_ROMASK 0x82200000
+#define FIMD_WINCON_ENWIN (1 << 0)
+#define FIMD_WINCON_BLD_PIX (1 << 6)
+#define FIMD_WINCON_ALPHA_MUL (1 << 7)
+#define FIMD_WINCON_ALPHA_SEL (1 << 1)
+#define FIMD_WINCON_SWAP 0x078000
+#define FIMD_WINCON_SWAP_SHIFT 15
+#define FIMD_WINCON_SWAP_WORD 0x1
+#define FIMD_WINCON_SWAP_HWORD 0x2
+#define FIMD_WINCON_SWAP_BYTE 0x4
+#define FIMD_WINCON_SWAP_BITS 0x8
+#define FIMD_WINCON_BUFSTAT_L (1 << 21)
+#define FIMD_WINCON_BUFSTAT_H (1 << 31)
+#define FIMD_WINCON_BUFSTATUS ((1 << 21) | (1 << 31))
+#define FIMD_WINCON_BUF0_STAT ((0 << 21) | (0 << 31))
+#define FIMD_WINCON_BUF1_STAT ((1 << 21) | (0 << 31))
+#define FIMD_WINCON_BUF2_STAT ((0 << 21) | (1 << 31))
+#define FIMD_WINCON_BUFSELECT ((1 << 20) | (1 << 30))
+#define FIMD_WINCON_BUF0_SEL ((0 << 20) | (0 << 30))
+#define FIMD_WINCON_BUF1_SEL ((1 << 20) | (0 << 30))
+#define FIMD_WINCON_BUF2_SEL ((0 << 20) | (1 << 30))
+#define FIMD_WINCON_BUFMODE (1 << 14)
+#define IS_PALETTIZED_MODE(w) (w->wincon & 0xC)
+#define PAL_MODE_WITH_ALPHA(x) ((x) == 7)
+#define WIN_BPP_MODE(w) ((w->wincon >> 2) & 0xF)
+#define WIN_BPP_MODE_WITH_ALPHA(w) \
+ (WIN_BPP_MODE(w) == 0xD || WIN_BPP_MODE(w) == 0xE)
+
+/* Shadow control register */
+#define FIMD_SHADOWCON 0x0034
+#define FIMD_WINDOW_PROTECTED(s, w) ((s) & (1 << (10 + (w))))
+/* Channel mapping control register */
+#define FIMD_WINCHMAP 0x003C
+
+/* Window position control registers */
+#define FIMD_VIDOSD_START 0x0040
+#define FIMD_VIDOSD_END 0x0088
+#define FIMD_VIDOSD_COORD_MASK 0x07FF
+#define FIMD_VIDOSD_HOR_SHIFT 11
+#define FIMD_VIDOSD_VER_SHIFT 0
+#define FIMD_VIDOSD_ALPHA_AEN0 0xFFF000
+#define FIMD_VIDOSD_AEN0_SHIFT 12
+#define FIMD_VIDOSD_ALPHA_AEN1 0x000FFF
+
+/* Frame buffer address registers */
+#define FIMD_VIDWADD0_START 0x00A0
+#define FIMD_VIDWADD0_END 0x00C4
+#define FIMD_VIDWADD0_END 0x00C4
+#define FIMD_VIDWADD1_START 0x00D0
+#define FIMD_VIDWADD1_END 0x00F4
+#define FIMD_VIDWADD2_START 0x0100
+#define FIMD_VIDWADD2_END 0x0110
+#define FIMD_VIDWADD2_PAGEWIDTH 0x1FFF
+#define FIMD_VIDWADD2_OFFSIZE 0x1FFF
+#define FIMD_VIDWADD2_OFFSIZE_SHIFT 13
+#define FIMD_VIDW0ADD0_B2 0x20A0
+#define FIMD_VIDW4ADD0_B2 0x20C0
+
+/* Video interrupt control registers */
+#define FIMD_VIDINTCON0 0x130
+#define FIMD_VIDINTCON1 0x134
+
+/* Window color key registers */
+#define FIMD_WKEYCON_START 0x140
+#define FIMD_WKEYCON_END 0x15C
+#define FIMD_WKEYCON0_COMPKEY 0x00FFFFFF
+#define FIMD_WKEYCON0_CTL_SHIFT 24
+#define FIMD_WKEYCON0_DIRCON (1 << 24)
+#define FIMD_WKEYCON0_KEYEN (1 << 25)
+#define FIMD_WKEYCON0_KEYBLEN (1 << 26)
+/* Window color key alpha control register */
+#define FIMD_WKEYALPHA_START 0x160
+#define FIMD_WKEYALPHA_END 0x16C
+
+/* Dithering control register */
+#define FIMD_DITHMODE 0x170
+
+/* Window alpha control registers */
+#define FIMD_VIDALPHA_ALPHA_LOWER 0x000F0F0F
+#define FIMD_VIDALPHA_ALPHA_UPPER 0x00F0F0F0
+#define FIMD_VIDWALPHA_START 0x21C
+#define FIMD_VIDWALPHA_END 0x240
+
+/* Window color map registers */
+#define FIMD_WINMAP_START 0x180
+#define FIMD_WINMAP_END 0x190
+#define FIMD_WINMAP_EN (1 << 24)
+#define FIMD_WINMAP_COLOR_MASK 0x00FFFFFF
+
+/* Window palette control registers */
+#define FIMD_WPALCON_HIGH 0x019C
+#define FIMD_WPALCON_LOW 0x01A0
+#define FIMD_WPALCON_UPDATEEN (1 << 9)
+#define FIMD_WPAL_W0PAL_L 0x07
+#define FIMD_WPAL_W0PAL_L_SHT 0
+#define FIMD_WPAL_W1PAL_L 0x07
+#define FIMD_WPAL_W1PAL_L_SHT 3
+#define FIMD_WPAL_W2PAL_L 0x01
+#define FIMD_WPAL_W2PAL_L_SHT 6
+#define FIMD_WPAL_W2PAL_H 0x06
+#define FIMD_WPAL_W2PAL_H_SHT 8
+#define FIMD_WPAL_W3PAL_L 0x01
+#define FIMD_WPAL_W3PAL_L_SHT 7
+#define FIMD_WPAL_W3PAL_H 0x06
+#define FIMD_WPAL_W3PAL_H_SHT 12
+#define FIMD_WPAL_W4PAL_L 0x01
+#define FIMD_WPAL_W4PAL_L_SHT 8
+#define FIMD_WPAL_W4PAL_H 0x06
+#define FIMD_WPAL_W4PAL_H_SHT 16
+
+/* Trigger control registers */
+#define FIMD_TRIGCON 0x01A4
+#define FIMD_TRIGCON_ROMASK 0x00000004
+
+/* LCD I80 Interface Control */
+#define FIMD_I80IFCON_START 0x01B0
+#define FIMD_I80IFCON_END 0x01BC
+/* Color gain control register */
+#define FIMD_COLORGAINCON 0x01C0
+/* LCD i80 Interface Command Control */
+#define FIMD_LDI_CMDCON0 0x01D0
+#define FIMD_LDI_CMDCON1 0x01D4
+/* I80 System Interface Manual Command Control */
+#define FIMD_SIFCCON0 0x01E0
+#define FIMD_SIFCCON2 0x01E8
+
+/* Hue Control Registers */
+#define FIMD_HUECOEFCR_START 0x01EC
+#define FIMD_HUECOEFCR_END 0x01F4
+#define FIMD_HUECOEFCB_START 0x01FC
+#define FIMD_HUECOEFCB_END 0x0208
+#define FIMD_HUEOFFSET 0x020C
+
+/* Video interrupt control registers */
+#define FIMD_VIDINT_INTFIFOPEND (1 << 0)
+#define FIMD_VIDINT_INTFRMPEND (1 << 1)
+#define FIMD_VIDINT_INTI80PEND (1 << 2)
+#define FIMD_VIDINT_INTEN (1 << 0)
+#define FIMD_VIDINT_INTFIFOEN (1 << 1)
+#define FIMD_VIDINT_INTFRMEN (1 << 12)
+#define FIMD_VIDINT_I80IFDONE (1 << 17)
+
+/* Window blend equation control registers */
+#define FIMD_BLENDEQ_START 0x0244
+#define FIMD_BLENDEQ_END 0x0250
+#define FIMD_BLENDCON 0x0260
+#define FIMD_ALPHA_8BIT (1 << 0)
+#define FIMD_BLENDEQ_COEF_MASK 0xF
+
+/* Window RTQOS Control Registers */
+#define FIMD_WRTQOSCON_START 0x0264
+#define FIMD_WRTQOSCON_END 0x0274
+
+/* LCD I80 Interface Command */
+#define FIMD_I80IFCMD_START 0x0280
+#define FIMD_I80IFCMD_END 0x02AC
+
+/* Shadow windows control registers */
+#define FIMD_SHD_ADD0_START 0x40A0
+#define FIMD_SHD_ADD0_END 0x40C0
+#define FIMD_SHD_ADD1_START 0x40D0
+#define FIMD_SHD_ADD1_END 0x40F0
+#define FIMD_SHD_ADD2_START 0x4100
+#define FIMD_SHD_ADD2_END 0x4110
+
+/* Palette memory */
+#define FIMD_PAL_MEM_START 0x2400
+#define FIMD_PAL_MEM_END 0x37FC
+/* Palette memory aliases for windows 0 and 1 */
+#define FIMD_PALMEM_AL_START 0x0400
+#define FIMD_PALMEM_AL_END 0x0BFC
+
+typedef struct {
+ uint8_t r, g, b;
+ /* D[31..24]dummy, D[23..16]rAlpha, D[15..8]gAlpha, D[7..0]bAlpha */
+ uint32_t a;
+} rgba;
+#define RGBA_SIZE 7
+
+typedef void pixel_to_rgb_func(uint32_t pixel, rgba *p);
+typedef struct Exynos4210fimdWindow Exynos4210fimdWindow;
+
+struct Exynos4210fimdWindow {
+ uint32_t wincon; /* Window control register */
+ uint32_t buf_start[3]; /* Start address for video frame buffer */
+ uint32_t buf_end[3]; /* End address for video frame buffer */
+ uint32_t keycon[2]; /* Window color key registers */
+ uint32_t keyalpha; /* Color key alpha control register */
+ uint32_t winmap; /* Window color map register */
+ uint32_t blendeq; /* Window blending equation control register */
+ uint32_t rtqoscon; /* Window RTQOS Control Registers */
+ uint32_t palette[256]; /* Palette RAM */
+ uint32_t shadow_buf_start; /* Start address of shadow frame buffer */
+ uint32_t shadow_buf_end; /* End address of shadow frame buffer */
+ uint32_t shadow_buf_size; /* Virtual shadow screen width */
+
+ pixel_to_rgb_func *pixel_to_rgb;
+ void (*draw_line)(Exynos4210fimdWindow *w, uint8_t *src, uint8_t *dst,
+ bool blend);
+ uint32_t (*get_alpha)(Exynos4210fimdWindow *w, uint32_t pix_a);
+ uint16_t lefttop_x, lefttop_y; /* VIDOSD0 register */
+ uint16_t rightbot_x, rightbot_y; /* VIDOSD1 register */
+ uint32_t osdsize; /* VIDOSD2&3 register */
+ uint32_t alpha_val[2]; /* VIDOSD2&3, VIDWALPHA registers */
+ uint16_t virtpage_width; /* VIDWADD2 register */
+ uint16_t virtpage_offsize; /* VIDWADD2 register */
+ MemoryRegionSection mem_section; /* RAM fragment containing framebuffer */
+ uint8_t *host_fb_addr; /* Host pointer to window's framebuffer */
+ target_phys_addr_t fb_len; /* Framebuffer length */
+};
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ DisplayState *console;
+ qemu_irq irq[3];
+
+ uint32_t vidcon[4]; /* Video main control registers 0-3 */
+ uint32_t vidtcon[4]; /* Video time control registers 0-3 */
+ uint32_t shadowcon; /* Window shadow control register */
+ uint32_t winchmap; /* Channel mapping control register */
+ uint32_t vidintcon[2]; /* Video interrupt control registers */
+ uint32_t dithmode; /* Dithering control register */
+ uint32_t wpalcon[2]; /* Window palette control registers */
+ uint32_t trigcon; /* Trigger control register */
+ uint32_t i80ifcon[4]; /* I80 interface control registers */
+ uint32_t colorgaincon; /* Color gain control register */
+ uint32_t ldi_cmdcon[2]; /* LCD I80 interface command control */
+ uint32_t sifccon[3]; /* I80 System Interface Manual Command Control */
+ uint32_t huecoef_cr[4]; /* Hue control registers */
+ uint32_t huecoef_cb[4]; /* Hue control registers */
+ uint32_t hueoffset; /* Hue offset control register */
+ uint32_t blendcon; /* Blending control register */
+ uint32_t i80ifcmd[12]; /* LCD I80 Interface Command */
+
+ Exynos4210fimdWindow window[5]; /* Window-specific registers */
+ uint8_t *ifb; /* Internal frame buffer */
+ bool invalidate; /* Image needs to be redrawn */
+ bool enabled; /* Display controller is enabled */
+} Exynos4210fimdState;
+
+/* Perform byte/halfword/word swap of data according to WINCON */
+static inline void fimd_swap_data(unsigned int swap_ctl, uint64_t *data)
+{
+ int i;
+ uint64_t res;
+ uint64_t x = *data;
+
+ if (swap_ctl & FIMD_WINCON_SWAP_BITS) {
+ res = 0;
+ for (i = 0; i < 64; i++) {
+ if (x & (1ULL << (64 - i))) {
+ res |= (1ULL << i);
+ }
+ }
+ x = res;
+ }
+
+ if (swap_ctl & FIMD_WINCON_SWAP_BYTE) {
+ x = bswap64(x);
+ }
+
+ if (swap_ctl & FIMD_WINCON_SWAP_HWORD) {
+ x = ((x & 0x000000000000FFFFULL) << 48) |
+ ((x & 0x00000000FFFF0000ULL) << 16) |
+ ((x & 0x0000FFFF00000000ULL) >> 16) |
+ ((x & 0xFFFF000000000000ULL) >> 48);
+ }
+
+ if (swap_ctl & FIMD_WINCON_SWAP_WORD) {
+ x = ((x & 0x00000000FFFFFFFFULL) << 32) |
+ ((x & 0xFFFFFFFF00000000ULL) >> 32);
+ }
+
+ *data = x;
+}
+
+/* Conversion routines of Pixel data from frame buffer area to internal RGBA
+ * pixel representation.
+ * Every color component internally represented as 8-bit value. If original
+ * data has less than 8 bit for component, data is extended to 8 bit. For
+ * example, if blue component has only two possible values 0 and 1 it will be
+ * extended to 0 and 0xFF */
+
+/* One bit for alpha representation */
+#define DEF_PIXEL_TO_RGB_A1(N, R, G, B) \
+static void N(uint32_t pixel, rgba *p) \
+{ \
+ p->b = ((pixel & ((1 << (B)) - 1)) << (8 - (B))) | \
+ ((pixel >> (2 * (B) - 8)) & ((1 << (8 - (B))) - 1)); \
+ pixel >>= (B); \
+ p->g = (pixel & ((1 << (G)) - 1)) << (8 - (G)) | \
+ ((pixel >> (2 * (G) - 8)) & ((1 << (8 - (G))) - 1)); \
+ pixel >>= (G); \
+ p->r = (pixel & ((1 << (R)) - 1)) << (8 - (R)) | \
+ ((pixel >> (2 * (R) - 8)) & ((1 << (8 - (R))) - 1)); \
+ pixel >>= (R); \
+ p->a = (pixel & 0x1); \
+}
+
+DEF_PIXEL_TO_RGB_A1(pixel_a444_to_rgb, 4, 4, 4)
+DEF_PIXEL_TO_RGB_A1(pixel_a555_to_rgb, 5, 5, 5)
+DEF_PIXEL_TO_RGB_A1(pixel_a666_to_rgb, 6, 6, 6)
+DEF_PIXEL_TO_RGB_A1(pixel_a665_to_rgb, 6, 6, 5)
+DEF_PIXEL_TO_RGB_A1(pixel_a888_to_rgb, 8, 8, 8)
+DEF_PIXEL_TO_RGB_A1(pixel_a887_to_rgb, 8, 8, 7)
+
+/* Alpha component is always zero */
+#define DEF_PIXEL_TO_RGB_A0(N, R, G, B) \
+static void N(uint32_t pixel, rgba *p) \
+{ \
+ p->b = ((pixel & ((1 << (B)) - 1)) << (8 - (B))) | \
+ ((pixel >> (2 * (B) - 8)) & ((1 << (8 - (B))) - 1)); \
+ pixel >>= (B); \
+ p->g = (pixel & ((1 << (G)) - 1)) << (8 - (G)) | \
+ ((pixel >> (2 * (G) - 8)) & ((1 << (8 - (G))) - 1)); \
+ pixel >>= (G); \
+ p->r = (pixel & ((1 << (R)) - 1)) << (8 - (R)) | \
+ ((pixel >> (2 * (R) - 8)) & ((1 << (8 - (R))) - 1)); \
+ p->a = 0x0; \
+}
+
+DEF_PIXEL_TO_RGB_A0(pixel_565_to_rgb, 5, 6, 5)
+DEF_PIXEL_TO_RGB_A0(pixel_555_to_rgb, 5, 5, 5)
+DEF_PIXEL_TO_RGB_A0(pixel_666_to_rgb, 6, 6, 6)
+DEF_PIXEL_TO_RGB_A0(pixel_888_to_rgb, 8, 8, 8)
+
+/* Alpha component has some meaningful value */
+#define DEF_PIXEL_TO_RGB_A(N, R, G, B, A) \
+static void N(uint32_t pixel, rgba *p) \
+{ \
+ p->b = ((pixel & ((1 << (B)) - 1)) << (8 - (B))) | \
+ ((pixel >> (2 * (B) - 8)) & ((1 << (8 - (B))) - 1)); \
+ pixel >>= (B); \
+ p->g = (pixel & ((1 << (G)) - 1)) << (8 - (G)) | \
+ ((pixel >> (2 * (G) - 8)) & ((1 << (8 - (G))) - 1)); \
+ pixel >>= (G); \
+ p->r = (pixel & ((1 << (R)) - 1)) << (8 - (R)) | \
+ ((pixel >> (2 * (R) - 8)) & ((1 << (8 - (R))) - 1)); \
+ pixel >>= (R); \
+ p->a = (pixel & ((1 << (A)) - 1)) << (8 - (A)) | \
+ ((pixel >> (2 * (A) - 8)) & ((1 << (8 - (A))) - 1)); \
+ p->a = p->a | (p->a << 8) | (p->a << 16); \
+}
+
+DEF_PIXEL_TO_RGB_A(pixel_4444_to_rgb, 4, 4, 4, 4)
+DEF_PIXEL_TO_RGB_A(pixel_8888_to_rgb, 8, 8, 8, 8)
+
+/* Lookup table to extent 2-bit color component to 8 bit */
+static const uint8_t pixel_lutable_2b[4] = {
+ 0x0, 0x55, 0xAA, 0xFF
+};
+/* Lookup table to extent 3-bit color component to 8 bit */
+static const uint8_t pixel_lutable_3b[8] = {
+ 0x0, 0x24, 0x49, 0x6D, 0x92, 0xB6, 0xDB, 0xFF
+};
+/* Special case for a232 bpp mode */
+static void pixel_a232_to_rgb(uint32_t pixel, rgba *p)
+{
+ p->b = pixel_lutable_2b[(pixel & 0x3)];
+ pixel >>= 2;
+ p->g = pixel_lutable_3b[(pixel & 0x7)];
+ pixel >>= 3;
+ p->r = pixel_lutable_2b[(pixel & 0x3)];
+ pixel >>= 2;
+ p->a = (pixel & 0x1);
+}
+
+/* Special case for (5+1, 5+1, 5+1) mode. Data bit 15 is common LSB
+ * for all three color components */
+static void pixel_1555_to_rgb(uint32_t pixel, rgba *p)
+{
+ uint8_t comm = (pixel >> 15) & 1;
+ p->b = ((((pixel & 0x1F) << 1) | comm) << 2) | ((pixel >> 3) & 0x3);
+ pixel >>= 5;
+ p->g = ((((pixel & 0x1F) << 1) | comm) << 2) | ((pixel >> 3) & 0x3);
+ pixel >>= 5;
+ p->r = ((((pixel & 0x1F) << 1) | comm) << 2) | ((pixel >> 3) & 0x3);
+ p->a = 0x0;
+}
+
+/* Put/get pixel to/from internal LCD Controller framebuffer */
+
+static int put_pixel_ifb(const rgba p, uint8_t *d)
+{
+ *(uint8_t *)d++ = p.r;
+ *(uint8_t *)d++ = p.g;
+ *(uint8_t *)d++ = p.b;
+ *(uint32_t *)d = p.a;
+ return RGBA_SIZE;
+}
+
+static int get_pixel_ifb(const uint8_t *s, rgba *p)
+{
+ p->r = *(uint8_t *)s++;
+ p->g = *(uint8_t *)s++;
+ p->b = *(uint8_t *)s++;
+ p->a = (*(uint32_t *)s) & 0x00FFFFFF;
+ return RGBA_SIZE;
+}
+
+static pixel_to_rgb_func *palette_data_format[8] = {
+ [0] = pixel_565_to_rgb,
+ [1] = pixel_a555_to_rgb,
+ [2] = pixel_666_to_rgb,
+ [3] = pixel_a665_to_rgb,
+ [4] = pixel_a666_to_rgb,
+ [5] = pixel_888_to_rgb,
+ [6] = pixel_a888_to_rgb,
+ [7] = pixel_8888_to_rgb
+};
+
+/* Returns Index in palette data formats table for given window number WINDOW */
+static uint32_t
+exynos4210_fimd_palette_format(Exynos4210fimdState *s, int window)
+{
+ uint32_t ret;
+
+ switch (window) {
+ case 0:
+ ret = (s->wpalcon[1] >> FIMD_WPAL_W0PAL_L_SHT) & FIMD_WPAL_W0PAL_L;
+ if (ret != 7) {
+ ret = 6 - ret;
+ }
+ break;
+ case 1:
+ ret = (s->wpalcon[1] >> FIMD_WPAL_W1PAL_L_SHT) & FIMD_WPAL_W1PAL_L;
+ if (ret != 7) {
+ ret = 6 - ret;
+ }
+ break;
+ case 2:
+ ret = ((s->wpalcon[0] >> FIMD_WPAL_W2PAL_H_SHT) & FIMD_WPAL_W2PAL_H) |
+ ((s->wpalcon[1] >> FIMD_WPAL_W2PAL_L_SHT) & FIMD_WPAL_W2PAL_L);
+ break;
+ case 3:
+ ret = ((s->wpalcon[0] >> FIMD_WPAL_W3PAL_H_SHT) & FIMD_WPAL_W3PAL_H) |
+ ((s->wpalcon[1] >> FIMD_WPAL_W3PAL_L_SHT) & FIMD_WPAL_W3PAL_L);
+ break;
+ case 4:
+ ret = ((s->wpalcon[0] >> FIMD_WPAL_W4PAL_H_SHT) & FIMD_WPAL_W4PAL_H) |
+ ((s->wpalcon[1] >> FIMD_WPAL_W4PAL_L_SHT) & FIMD_WPAL_W4PAL_L);
+ break;
+ default:
+ hw_error("exynos4210.fimd: incorrect window number %d\n", window);
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+#define FIMD_1_MINUS_COLOR(x) \
+ ((0xFF - ((x) & 0xFF)) | (0xFF00 - ((x) & 0xFF00)) | \
+ (0xFF0000 - ((x) & 0xFF0000)))
+#define EXTEND_LOWER_HALFBYTE(x) (((x) & 0xF0F0F) | (((x) << 4) & 0xF0F0F0))
+#define EXTEND_UPPER_HALFBYTE(x) (((x) & 0xF0F0F0) | (((x) >> 4) & 0xF0F0F))
+
+/* Multiply three lower bytes of two 32-bit words with each other.
+ * Each byte with values 0-255 is considered as a number with possible values
+ * in a range [0 - 1] */
+static inline uint32_t fimd_mult_each_byte(uint32_t a, uint32_t b)
+{
+ uint32_t tmp;
+ uint32_t ret;
+
+ ret = ((tmp = (((a & 0xFF) * (b & 0xFF)) / 0xFF)) > 0xFF) ? 0xFF : tmp;
+ ret |= ((tmp = ((((a >> 8) & 0xFF) * ((b >> 8) & 0xFF)) / 0xFF)) > 0xFF) ?
+ 0xFF00 : tmp << 8;
+ ret |= ((tmp = ((((a >> 16) & 0xFF) * ((b >> 16) & 0xFF)) / 0xFF)) > 0xFF) ?
+ 0xFF0000 : tmp << 16;
+ return ret;
+}
+
+/* For each corresponding bytes of two 32-bit words: (a*b + c*d)
+ * Byte values 0-255 are mapped to a range [0 .. 1] */
+static inline uint32_t
+fimd_mult_and_sum_each_byte(uint32_t a, uint32_t b, uint32_t c, uint32_t d)
+{
+ uint32_t tmp;
+ uint32_t ret;
+
+ ret = ((tmp = (((a & 0xFF) * (b & 0xFF) + (c & 0xFF) * (d & 0xFF)) / 0xFF))
+ > 0xFF) ? 0xFF : tmp;
+ ret |= ((tmp = ((((a >> 8) & 0xFF) * ((b >> 8) & 0xFF) + ((c >> 8) & 0xFF) *
+ ((d >> 8) & 0xFF)) / 0xFF)) > 0xFF) ? 0xFF00 : tmp << 8;
+ ret |= ((tmp = ((((a >> 16) & 0xFF) * ((b >> 16) & 0xFF) +
+ ((c >> 16) & 0xFF) * ((d >> 16) & 0xFF)) / 0xFF)) > 0xFF) ?
+ 0xFF0000 : tmp << 16;
+ return ret;
+}
+
+/* These routines cover all possible sources of window's transparent factor
+ * used in blending equation. Choice of routine is affected by WPALCON
+ * registers, BLENDCON register and window's WINCON register */
+
+static uint32_t fimd_get_alpha_pix(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return pix_a;
+}
+
+static uint32_t
+fimd_get_alpha_pix_extlow(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return EXTEND_LOWER_HALFBYTE(pix_a);
+}
+
+static uint32_t
+fimd_get_alpha_pix_exthigh(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return EXTEND_UPPER_HALFBYTE(pix_a);
+}
+
+static uint32_t fimd_get_alpha_mult(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return fimd_mult_each_byte(pix_a, w->alpha_val[0]);
+}
+
+static uint32_t fimd_get_alpha_mult_ext(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return fimd_mult_each_byte(EXTEND_LOWER_HALFBYTE(pix_a),
+ EXTEND_UPPER_HALFBYTE(w->alpha_val[0]));
+}
+
+static uint32_t fimd_get_alpha_aen(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return w->alpha_val[pix_a];
+}
+
+static uint32_t fimd_get_alpha_aen_ext(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return EXTEND_UPPER_HALFBYTE(w->alpha_val[pix_a]);
+}
+
+static uint32_t fimd_get_alpha_sel(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return w->alpha_val[(w->wincon & FIMD_WINCON_ALPHA_SEL) ? 1 : 0];
+}
+
+static uint32_t fimd_get_alpha_sel_ext(Exynos4210fimdWindow *w, uint32_t pix_a)
+{
+ return EXTEND_UPPER_HALFBYTE(w->alpha_val[(w->wincon &
+ FIMD_WINCON_ALPHA_SEL) ? 1 : 0]);
+}
+
+/* Updates currently active alpha value get function for specified window */
+static void fimd_update_get_alpha(Exynos4210fimdState *s, int win)
+{
+ Exynos4210fimdWindow *w = &s->window[win];
+ const bool alpha_is_8bit = s->blendcon & FIMD_ALPHA_8BIT;
+
+ if (w->wincon & FIMD_WINCON_BLD_PIX) {
+ if ((w->wincon & FIMD_WINCON_ALPHA_SEL) && WIN_BPP_MODE_WITH_ALPHA(w)) {
+ /* In this case, alpha component contains meaningful value */
+ if (w->wincon & FIMD_WINCON_ALPHA_MUL) {
+ w->get_alpha = alpha_is_8bit ?
+ fimd_get_alpha_mult : fimd_get_alpha_mult_ext;
+ } else {
+ w->get_alpha = alpha_is_8bit ?
+ fimd_get_alpha_pix : fimd_get_alpha_pix_extlow;
+ }
+ } else {
+ if (IS_PALETTIZED_MODE(w) &&
+ PAL_MODE_WITH_ALPHA(exynos4210_fimd_palette_format(s, win))) {
+ /* Alpha component has 8-bit numeric value */
+ w->get_alpha = alpha_is_8bit ?
+ fimd_get_alpha_pix : fimd_get_alpha_pix_exthigh;
+ } else {
+ /* Alpha has only two possible values (AEN) */
+ w->get_alpha = alpha_is_8bit ?
+ fimd_get_alpha_aen : fimd_get_alpha_aen_ext;
+ }
+ }
+ } else {
+ w->get_alpha = alpha_is_8bit ? fimd_get_alpha_sel :
+ fimd_get_alpha_sel_ext;
+ }
+}
+
+/* Blends current window's (w) pixel (foreground pixel *ret) with background
+ * window (w_blend) pixel p_bg according to formula:
+ * NEW_COLOR = a_coef x FG_PIXEL_COLOR + b_coef x BG_PIXEL_COLOR
+ * NEW_ALPHA = p_coef x FG_ALPHA + q_coef x BG_ALPHA
+ */
+static void
+exynos4210_fimd_blend_pixel(Exynos4210fimdWindow *w, rgba p_bg, rgba *ret)
+{
+ rgba p_fg = *ret;
+ uint32_t bg_color = ((p_bg.r & 0xFF) << 16) | ((p_bg.g & 0xFF) << 8) |
+ (p_bg.b & 0xFF);
+ uint32_t fg_color = ((p_fg.r & 0xFF) << 16) | ((p_fg.g & 0xFF) << 8) |
+ (p_fg.b & 0xFF);
+ uint32_t alpha_fg = p_fg.a;
+ int i;
+ /* It is possible that blending equation parameters a and b do not
+ * depend on window BLENEQ register. Account for this with first_coef */
+ enum { A_COEF = 0, B_COEF = 1, P_COEF = 2, Q_COEF = 3, COEF_NUM = 4};
+ uint32_t first_coef = A_COEF;
+ uint32_t blend_param[COEF_NUM];
+
+ if (w->keycon[0] & FIMD_WKEYCON0_KEYEN) {
+ uint32_t colorkey = (w->keycon[1] &
+ ~(w->keycon[0] & FIMD_WKEYCON0_COMPKEY)) & FIMD_WKEYCON0_COMPKEY;
+
+ if ((w->keycon[0] & FIMD_WKEYCON0_DIRCON) &&
+ (bg_color & ~(w->keycon[0] & FIMD_WKEYCON0_COMPKEY)) == colorkey) {
+ /* Foreground pixel is displayed */
+ if (w->keycon[0] & FIMD_WKEYCON0_KEYBLEN) {
+ alpha_fg = w->keyalpha;
+ blend_param[A_COEF] = alpha_fg;
+ blend_param[B_COEF] = FIMD_1_MINUS_COLOR(alpha_fg);
+ } else {
+ alpha_fg = 0;
+ blend_param[A_COEF] = 0xFFFFFF;
+ blend_param[B_COEF] = 0x0;
+ }
+ first_coef = P_COEF;
+ } else if ((w->keycon[0] & FIMD_WKEYCON0_DIRCON) == 0 &&
+ (fg_color & ~(w->keycon[0] & FIMD_WKEYCON0_COMPKEY)) == colorkey) {
+ /* Background pixel is displayed */
+ if (w->keycon[0] & FIMD_WKEYCON0_KEYBLEN) {
+ alpha_fg = w->keyalpha;
+ blend_param[A_COEF] = alpha_fg;
+ blend_param[B_COEF] = FIMD_1_MINUS_COLOR(alpha_fg);
+ } else {
+ alpha_fg = 0;
+ blend_param[A_COEF] = 0x0;
+ blend_param[B_COEF] = 0xFFFFFF;
+ }
+ first_coef = P_COEF;
+ }
+ }
+
+ for (i = first_coef; i < COEF_NUM; i++) {
+ switch ((w->blendeq >> i * 6) & FIMD_BLENDEQ_COEF_MASK) {
+ case 0:
+ blend_param[i] = 0;
+ break;
+ case 1:
+ blend_param[i] = 0xFFFFFF;
+ break;
+ case 2:
+ blend_param[i] = alpha_fg;
+ break;
+ case 3:
+ blend_param[i] = FIMD_1_MINUS_COLOR(alpha_fg);
+ break;
+ case 4:
+ blend_param[i] = p_bg.a;
+ break;
+ case 5:
+ blend_param[i] = FIMD_1_MINUS_COLOR(p_bg.a);
+ break;
+ case 6:
+ blend_param[i] = w->alpha_val[0];
+ break;
+ case 10:
+ blend_param[i] = fg_color;
+ break;
+ case 11:
+ blend_param[i] = FIMD_1_MINUS_COLOR(fg_color);
+ break;
+ case 12:
+ blend_param[i] = bg_color;
+ break;
+ case 13:
+ blend_param[i] = FIMD_1_MINUS_COLOR(bg_color);
+ break;
+ default:
+ hw_error("exynos4210.fimd: blend equation coef illegal value\n");
+ break;
+ }
+ }
+
+ fg_color = fimd_mult_and_sum_each_byte(bg_color, blend_param[B_COEF],
+ fg_color, blend_param[A_COEF]);
+ ret->b = fg_color & 0xFF;
+ fg_color >>= 8;
+ ret->g = fg_color & 0xFF;
+ fg_color >>= 8;
+ ret->r = fg_color & 0xFF;
+ ret->a = fimd_mult_and_sum_each_byte(alpha_fg, blend_param[P_COEF],
+ p_bg.a, blend_param[Q_COEF]);
+}
+
+/* These routines read data from video frame buffer in system RAM, convert
+ * this data to display controller internal representation, if necessary,
+ * perform pixel blending with data, currently presented in internal buffer.
+ * Result is stored in display controller internal frame buffer. */
+
+/* Draw line with index in palette table in RAM frame buffer data */
+#define DEF_DRAW_LINE_PALETTE(N) \
+static void glue(draw_line_palette_, N)(Exynos4210fimdWindow *w, uint8_t *src, \
+ uint8_t *dst, bool blend) \
+{ \
+ int width = w->rightbot_x - w->lefttop_x + 1; \
+ uint8_t *ifb = dst; \
+ uint8_t swap = (w->wincon & FIMD_WINCON_SWAP) >> FIMD_WINCON_SWAP_SHIFT; \
+ uint64_t data; \
+ rgba p, p_old; \
+ int i; \
+ do { \
+ data = ldq_raw((void *)src); \
+ src += 8; \
+ fimd_swap_data(swap, &data); \
+ for (i = (64 / (N) - 1); i >= 0; i--) { \
+ w->pixel_to_rgb(w->palette[(data >> ((N) * i)) & \
+ ((1ULL << (N)) - 1)], &p); \
+ p.a = w->get_alpha(w, p.a); \
+ if (blend) { \
+ ifb += get_pixel_ifb(ifb, &p_old); \
+ exynos4210_fimd_blend_pixel(w, p_old, &p); \
+ } \
+ dst += put_pixel_ifb(p, dst); \
+ } \
+ width -= (64 / (N)); \
+ } while (width > 0); \
+}
+
+/* Draw line with direct color value in RAM frame buffer data */
+#define DEF_DRAW_LINE_NOPALETTE(N) \
+static void glue(draw_line_, N)(Exynos4210fimdWindow *w, uint8_t *src, \
+ uint8_t *dst, bool blend) \
+{ \
+ int width = w->rightbot_x - w->lefttop_x + 1; \
+ uint8_t *ifb = dst; \
+ uint8_t swap = (w->wincon & FIMD_WINCON_SWAP) >> FIMD_WINCON_SWAP_SHIFT; \
+ uint64_t data; \
+ rgba p, p_old; \
+ int i; \
+ do { \
+ data = ldq_raw((void *)src); \
+ src += 8; \
+ fimd_swap_data(swap, &data); \
+ for (i = (64 / (N) - 1); i >= 0; i--) { \
+ w->pixel_to_rgb((data >> ((N) * i)) & ((1ULL << (N)) - 1), &p); \
+ p.a = w->get_alpha(w, p.a); \
+ if (blend) { \
+ ifb += get_pixel_ifb(ifb, &p_old); \
+ exynos4210_fimd_blend_pixel(w, p_old, &p); \
+ } \
+ dst += put_pixel_ifb(p, dst); \
+ } \
+ width -= (64 / (N)); \
+ } while (width > 0); \
+}
+
+DEF_DRAW_LINE_PALETTE(1)
+DEF_DRAW_LINE_PALETTE(2)
+DEF_DRAW_LINE_PALETTE(4)
+DEF_DRAW_LINE_PALETTE(8)
+DEF_DRAW_LINE_NOPALETTE(8) /* 8bpp mode has palette and non-palette versions */
+DEF_DRAW_LINE_NOPALETTE(16)
+DEF_DRAW_LINE_NOPALETTE(32)
+
+/* Special draw line routine for window color map case */
+static void draw_line_mapcolor(Exynos4210fimdWindow *w, uint8_t *src,
+ uint8_t *dst, bool blend)
+{
+ rgba p, p_old;
+ uint8_t *ifb = dst;
+ int width = w->rightbot_x - w->lefttop_x + 1;
+ uint32_t map_color = w->winmap & FIMD_WINMAP_COLOR_MASK;
+
+ do {
+ pixel_888_to_rgb(map_color, &p);
+ p.a = w->get_alpha(w, p.a);
+ if (blend) {
+ ifb += get_pixel_ifb(ifb, &p_old);
+ exynos4210_fimd_blend_pixel(w, p_old, &p);
+ }
+ dst += put_pixel_ifb(p, dst);
+ } while (--width);
+}
+
+/* Write RGB to QEMU's GraphicConsole framebuffer */
+
+static int put_to_qemufb_pixel8(const rgba p, uint8_t *d)
+{
+ uint32_t pixel = rgb_to_pixel8(p.r, p.g, p.b);
+ *(uint8_t *)d = pixel;
+ return 1;
+}
+
+static int put_to_qemufb_pixel15(const rgba p, uint8_t *d)
+{
+ uint32_t pixel = rgb_to_pixel15(p.r, p.g, p.b);
+ *(uint16_t *)d = pixel;
+ return 2;
+}
+
+static int put_to_qemufb_pixel16(const rgba p, uint8_t *d)
+{
+ uint32_t pixel = rgb_to_pixel16(p.r, p.g, p.b);
+ *(uint16_t *)d = pixel;
+ return 2;
+}
+
+static int put_to_qemufb_pixel24(const rgba p, uint8_t *d)
+{
+ uint32_t pixel = rgb_to_pixel24(p.r, p.g, p.b);
+ *(uint8_t *)d++ = (pixel >> 0) & 0xFF;
+ *(uint8_t *)d++ = (pixel >> 8) & 0xFF;
+ *(uint8_t *)d++ = (pixel >> 16) & 0xFF;
+ return 3;
+}
+
+static int put_to_qemufb_pixel32(const rgba p, uint8_t *d)
+{
+ uint32_t pixel = rgb_to_pixel24(p.r, p.g, p.b);
+ *(uint32_t *)d = pixel;
+ return 4;
+}
+
+/* Routine to copy pixel from internal buffer to QEMU buffer */
+static int (*put_pixel_toqemu)(const rgba p, uint8_t *pixel);
+static inline void fimd_update_putpix_qemu(int bpp)
+{
+ switch (bpp) {
+ case 8:
+ put_pixel_toqemu = put_to_qemufb_pixel8;
+ break;
+ case 15:
+ put_pixel_toqemu = put_to_qemufb_pixel15;
+ break;
+ case 16:
+ put_pixel_toqemu = put_to_qemufb_pixel16;
+ break;
+ case 24:
+ put_pixel_toqemu = put_to_qemufb_pixel24;
+ break;
+ case 32:
+ put_pixel_toqemu = put_to_qemufb_pixel32;
+ break;
+ default:
+ hw_error("exynos4210.fimd: unsupported BPP (%d)", bpp);
+ break;
+ }
+}
+
+/* Routine to copy a line from internal frame buffer to QEMU display */
+static void fimd_copy_line_toqemu(int width, uint8_t *src, uint8_t *dst)
+{
+ rgba p;
+
+ do {
+ src += get_pixel_ifb(src, &p);
+ dst += put_pixel_toqemu(p, dst);
+ } while (--width);
+}
+
+/* Parse BPPMODE_F = WINCON1[5:2] bits */
+static void exynos4210_fimd_update_win_bppmode(Exynos4210fimdState *s, int win)
+{
+ Exynos4210fimdWindow *w = &s->window[win];
+
+ if (w->winmap & FIMD_WINMAP_EN) {
+ w->draw_line = draw_line_mapcolor;
+ return;
+ }
+
+ switch (WIN_BPP_MODE(w)) {
+ case 0:
+ w->draw_line = draw_line_palette_1;
+ w->pixel_to_rgb =
+ palette_data_format[exynos4210_fimd_palette_format(s, win)];
+ break;
+ case 1:
+ w->draw_line = draw_line_palette_2;
+ w->pixel_to_rgb =
+ palette_data_format[exynos4210_fimd_palette_format(s, win)];
+ break;
+ case 2:
+ w->draw_line = draw_line_palette_4;
+ w->pixel_to_rgb =
+ palette_data_format[exynos4210_fimd_palette_format(s, win)];
+ break;
+ case 3:
+ w->draw_line = draw_line_palette_8;
+ w->pixel_to_rgb =
+ palette_data_format[exynos4210_fimd_palette_format(s, win)];
+ break;
+ case 4:
+ w->draw_line = draw_line_8;
+ w->pixel_to_rgb = pixel_a232_to_rgb;
+ break;
+ case 5:
+ w->draw_line = draw_line_16;
+ w->pixel_to_rgb = pixel_565_to_rgb;
+ break;
+ case 6:
+ w->draw_line = draw_line_16;
+ w->pixel_to_rgb = pixel_a555_to_rgb;
+ break;
+ case 7:
+ w->draw_line = draw_line_16;
+ w->pixel_to_rgb = pixel_1555_to_rgb;
+ break;
+ case 8:
+ w->draw_line = draw_line_32;
+ w->pixel_to_rgb = pixel_666_to_rgb;
+ break;
+ case 9:
+ w->draw_line = draw_line_32;
+ w->pixel_to_rgb = pixel_a665_to_rgb;
+ break;
+ case 10:
+ w->draw_line = draw_line_32;
+ w->pixel_to_rgb = pixel_a666_to_rgb;
+ break;
+ case 11:
+ w->draw_line = draw_line_32;
+ w->pixel_to_rgb = pixel_888_to_rgb;
+ break;
+ case 12:
+ w->draw_line = draw_line_32;
+ w->pixel_to_rgb = pixel_a887_to_rgb;
+ break;
+ case 13:
+ w->draw_line = draw_line_32;
+ if ((w->wincon & FIMD_WINCON_BLD_PIX) && (w->wincon &
+ FIMD_WINCON_ALPHA_SEL)) {
+ w->pixel_to_rgb = pixel_8888_to_rgb;
+ } else {
+ w->pixel_to_rgb = pixel_a888_to_rgb;
+ }
+ break;
+ case 14:
+ w->draw_line = draw_line_16;
+ if ((w->wincon & FIMD_WINCON_BLD_PIX) && (w->wincon &
+ FIMD_WINCON_ALPHA_SEL)) {
+ w->pixel_to_rgb = pixel_4444_to_rgb;
+ } else {
+ w->pixel_to_rgb = pixel_a444_to_rgb;
+ }
+ break;
+ case 15:
+ w->draw_line = draw_line_16;
+ w->pixel_to_rgb = pixel_555_to_rgb;
+ break;
+ }
+}
+
+#if EXYNOS4210_FIMD_MODE_TRACE > 0
+static const char *exynos4210_fimd_get_bppmode(int mode_code)
+{
+ switch (mode_code) {
+ case 0:
+ return "1 bpp";
+ case 1:
+ return "2 bpp";
+ case 2:
+ return "4 bpp";
+ case 3:
+ return "8 bpp (palettized)";
+ case 4:
+ return "8 bpp (non-palettized, A: 1-R:2-G:3-B:2)";
+ case 5:
+ return "16 bpp (non-palettized, R:5-G:6-B:5)";
+ case 6:
+ return "16 bpp (non-palettized, A:1-R:5-G:5-B:5)";
+ case 7:
+ return "16 bpp (non-palettized, I :1-R:5-G:5-B:5)";
+ case 8:
+ return "Unpacked 18 bpp (non-palettized, R:6-G:6-B:6)";
+ case 9:
+ return "Unpacked 18bpp (non-palettized,A:1-R:6-G:6-B:5)";
+ case 10:
+ return "Unpacked 19bpp (non-palettized,A:1-R:6-G:6-B:6)";
+ case 11:
+ return "Unpacked 24 bpp (non-palettized R:8-G:8-B:8)";
+ case 12:
+ return "Unpacked 24 bpp (non-palettized A:1-R:8-G:8-B:7)";
+ case 13:
+ return "Unpacked 25 bpp (non-palettized A:1-R:8-G:8-B:8)";
+ case 14:
+ return "Unpacked 13 bpp (non-palettized A:1-R:4-G:4-B:4)";
+ case 15:
+ return "Unpacked 15 bpp (non-palettized R:5-G:5-B:5)";
+ default:
+ return "Non-existing bpp mode";
+ }
+}
+
+static inline void exynos4210_fimd_trace_bppmode(Exynos4210fimdState *s,
+ int win_num, uint32_t val)
+{
+ Exynos4210fimdWindow *w = &s->window[win_num];
+
+ if (w->winmap & FIMD_WINMAP_EN) {
+ printf("QEMU FIMD: Window %d is mapped with MAPCOLOR=0x%x\n",
+ win_num, w->winmap & 0xFFFFFF);
+ return;
+ }
+
+ if ((val != 0xFFFFFFFF) && ((w->wincon >> 2) & 0xF) == ((val >> 2) & 0xF)) {
+ return;
+ }
+ printf("QEMU FIMD: Window %d BPP mode set to %s\n", win_num,
+ exynos4210_fimd_get_bppmode((val >> 2) & 0xF));
+}
+#else
+static inline void exynos4210_fimd_trace_bppmode(Exynos4210fimdState *s,
+ int win_num, uint32_t val)
+{
+
+}
+#endif
+
+static inline int fimd_get_buffer_id(Exynos4210fimdWindow *w)
+{
+ switch (w->wincon & FIMD_WINCON_BUFSTATUS) {
+ case FIMD_WINCON_BUF0_STAT:
+ return 0;
+ case FIMD_WINCON_BUF1_STAT:
+ return 1;
+ case FIMD_WINCON_BUF2_STAT:
+ return 2;
+ default:
+ DPRINT_ERROR("Non-existent buffer index\n");
+ return 0;
+ }
+}
+
+/* Updates specified window's MemorySection based on values of WINCON,
+ * VIDOSDA, VIDOSDB, VIDWADDx and SHADOWCON registers */
+static void fimd_update_memory_section(Exynos4210fimdState *s, unsigned win)
+{
+ Exynos4210fimdWindow *w = &s->window[win];
+ target_phys_addr_t fb_start_addr, fb_mapped_len;
+
+ if (!s->enabled || !(w->wincon & FIMD_WINCON_ENWIN) ||
+ FIMD_WINDOW_PROTECTED(s->shadowcon, win)) {
+ return;
+ }
+
+ if (w->host_fb_addr) {
+ cpu_physical_memory_unmap(w->host_fb_addr, w->fb_len, 0, 0);
+ w->host_fb_addr = NULL;
+ w->fb_len = 0;
+ }
+
+ fb_start_addr = w->buf_start[fimd_get_buffer_id(w)];
+ /* Total number of bytes of virtual screen used by current window */
+ w->fb_len = fb_mapped_len = (w->virtpage_width + w->virtpage_offsize) *
+ (w->rightbot_y - w->lefttop_y + 1);
+ w->mem_section = memory_region_find(sysbus_address_space(&s->busdev),
+ fb_start_addr, w->fb_len);
+ assert(w->mem_section.mr);
+ assert(w->mem_section.offset_within_address_space == fb_start_addr);
+ DPRINT_TRACE("Window %u framebuffer changed: address=0x%08x, len=0x%x\n",
+ win, fb_start_addr, w->fb_len);
+
+ if (w->mem_section.size != w->fb_len ||
+ !memory_region_is_ram(w->mem_section.mr)) {
+ DPRINT_ERROR("Failed to find window %u framebuffer region\n", win);
+ goto error_return;
+ }
+
+ w->host_fb_addr = cpu_physical_memory_map(fb_start_addr, &fb_mapped_len, 0);
+ if (!w->host_fb_addr) {
+ DPRINT_ERROR("Failed to map window %u framebuffer\n", win);
+ goto error_return;
+ }
+
+ if (fb_mapped_len != w->fb_len) {
+ DPRINT_ERROR("Window %u mapped framebuffer length is less then "
+ "expected\n", win);
+ cpu_physical_memory_unmap(w->host_fb_addr, fb_mapped_len, 0, 0);
+ goto error_return;
+ }
+ return;
+
+error_return:
+ w->mem_section.mr = NULL;
+ w->mem_section.size = 0;
+ w->host_fb_addr = NULL;
+ w->fb_len = 0;
+}
+
+static void exynos4210_fimd_enable(Exynos4210fimdState *s, bool enabled)
+{
+ if (enabled && !s->enabled) {
+ unsigned w;
+ s->enabled = true;
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ fimd_update_memory_section(s, w);
+ }
+ }
+ s->enabled = enabled;
+ DPRINT_TRACE("display controller %s\n", enabled ? "enabled" : "disabled");
+}
+
+static inline uint32_t unpack_upper_4(uint32_t x)
+{
+ return ((x & 0xF00) << 12) | ((x & 0xF0) << 8) | ((x & 0xF) << 4);
+}
+
+static inline uint32_t pack_upper_4(uint32_t x)
+{
+ return (((x & 0xF00000) >> 12) | ((x & 0xF000) >> 8) |
+ ((x & 0xF0) >> 4)) & 0xFFF;
+}
+
+static void exynos4210_fimd_update_irq(Exynos4210fimdState *s)
+{
+ if (!(s->vidintcon[0] & FIMD_VIDINT_INTEN)) {
+ qemu_irq_lower(s->irq[0]);
+ qemu_irq_lower(s->irq[1]);
+ qemu_irq_lower(s->irq[2]);
+ return;
+ }
+ if ((s->vidintcon[0] & FIMD_VIDINT_INTFIFOEN) &&
+ (s->vidintcon[1] & FIMD_VIDINT_INTFIFOPEND)) {
+ qemu_irq_raise(s->irq[0]);
+ } else {
+ qemu_irq_lower(s->irq[0]);
+ }
+ if ((s->vidintcon[0] & FIMD_VIDINT_INTFRMEN) &&
+ (s->vidintcon[1] & FIMD_VIDINT_INTFRMPEND)) {
+ qemu_irq_raise(s->irq[1]);
+ } else {
+ qemu_irq_lower(s->irq[1]);
+ }
+ if ((s->vidintcon[0] & FIMD_VIDINT_I80IFDONE) &&
+ (s->vidintcon[1] & FIMD_VIDINT_INTI80PEND)) {
+ qemu_irq_raise(s->irq[2]);
+ } else {
+ qemu_irq_lower(s->irq[2]);
+ }
+}
+
+static void exynos4210_fimd_invalidate(void *opaque)
+{
+ Exynos4210fimdState *s = (Exynos4210fimdState *)opaque;
+ s->invalidate = true;
+}
+
+static void exynos4210_update_resolution(Exynos4210fimdState *s)
+{
+ /* LCD resolution is stored in VIDEO TIME CONTROL REGISTER 2 */
+ uint32_t width = ((s->vidtcon[2] >> FIMD_VIDTCON2_HOR_SHIFT) &
+ FIMD_VIDTCON2_SIZE_MASK) + 1;
+ uint32_t height = ((s->vidtcon[2] >> FIMD_VIDTCON2_VER_SHIFT) &
+ FIMD_VIDTCON2_SIZE_MASK) + 1;
+
+ if (s->ifb == NULL || ds_get_width(s->console) != width ||
+ ds_get_height(s->console) != height) {
+ DPRINT_L1("Resolution changed from %ux%u to %ux%u\n",
+ ds_get_width(s->console), ds_get_height(s->console), width, height);
+ qemu_console_resize(s->console, width, height);
+ s->ifb = g_realloc(s->ifb, width * height * RGBA_SIZE + 1);
+ memset(s->ifb, 0, width * height * RGBA_SIZE + 1);
+ exynos4210_fimd_invalidate(s);
+ }
+}
+
+static void exynos4210_fimd_update(void *opaque)
+{
+ Exynos4210fimdState *s = (Exynos4210fimdState *)opaque;
+ Exynos4210fimdWindow *w;
+ int i, line;
+ target_phys_addr_t fb_line_addr, inc_size, x;
+ int scrn_height;
+ int first_line = -1, last_line = -1, scrn_width;
+ bool blend = false;
+ uint8_t *host_fb_addr;
+ bool is_dirty = false;
+ const int global_width = (s->vidtcon[2] & FIMD_VIDTCON2_SIZE_MASK) + 1;
+ const int global_height = ((s->vidtcon[2] >> FIMD_VIDTCON2_VER_SHIFT) &
+ FIMD_VIDTCON2_SIZE_MASK) + 1;
+
+ if (!s || !s->console || !ds_get_bits_per_pixel(s->console) ||
+ !s->enabled) {
+ return;
+ }
+ exynos4210_update_resolution(s);
+
+ for (i = 0; i < NUM_OF_WINDOWS; i++) {
+ w = &s->window[i];
+ if ((w->wincon & FIMD_WINCON_ENWIN) && w->host_fb_addr) {
+ scrn_height = w->rightbot_y - w->lefttop_y + 1;
+ scrn_width = w->virtpage_width;
+ /* Total width of virtual screen page in bytes */
+ inc_size = scrn_width + w->virtpage_offsize;
+ memory_region_sync_dirty_bitmap(w->mem_section.mr);
+ host_fb_addr = w->host_fb_addr;
+ fb_line_addr = w->mem_section.offset_within_region;
+
+ for (line = 0; line < scrn_height; line++) {
+ for (x = fb_line_addr;
+ x < TARGET_PAGE_ALIGN(fb_line_addr + scrn_width);
+ x += TARGET_PAGE_SIZE) {
+ is_dirty = is_dirty ||
+ memory_region_get_dirty(w->mem_section.mr,
+ x, DIRTY_MEMORY_VGA);
+ }
+
+ if (s->invalidate || is_dirty) {
+ if (first_line == -1) {
+ first_line = line;
+ }
+ last_line = line;
+ w->draw_line(w, host_fb_addr, s->ifb +
+ w->lefttop_x * RGBA_SIZE + (w->lefttop_y + line) *
+ global_width * RGBA_SIZE, blend);
+ }
+ host_fb_addr += inc_size;
+ fb_line_addr += inc_size;
+ is_dirty = false;
+ }
+ memory_region_reset_dirty(w->mem_section.mr,
+ w->mem_section.offset_within_region,
+ w->fb_len, DIRTY_MEMORY_VGA);
+ blend = true;
+ }
+ }
+
+ /* Copy resulting image to QEMU_CONSOLE. */
+ if (first_line >= 0) {
+ uint8_t *d;
+ int bpp;
+
+ bpp = ds_get_bits_per_pixel(s->console);
+ fimd_update_putpix_qemu(bpp);
+ bpp = (bpp + 1) >> 3;
+ d = ds_get_data(s->console);
+ for (line = first_line; line <= last_line; line++) {
+ fimd_copy_line_toqemu(global_width, s->ifb + global_width * line *
+ RGBA_SIZE, d + global_width * line * bpp);
+ }
+ dpy_update(s->console, 0, 0, global_width, global_height);
+ }
+ s->invalidate = false;
+ s->vidintcon[1] |= FIMD_VIDINT_INTFRMPEND;
+ if ((s->vidcon[0] & FIMD_VIDCON0_ENVID_F) == 0) {
+ exynos4210_fimd_enable(s, false);
+ }
+ exynos4210_fimd_update_irq(s);
+}
+
+static void exynos4210_fimd_reset(DeviceState *d)
+{
+ Exynos4210fimdState *s = container_of(d, Exynos4210fimdState, busdev.qdev);
+ unsigned w;
+
+ DPRINT_TRACE("Display controller reset\n");
+ /* Set all display controller registers to 0 */
+ memset(&s->vidcon, 0, (uint8_t *)&s->window - (uint8_t *)&s->vidcon);
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ memset(&s->window[w], 0, sizeof(Exynos4210fimdWindow));
+ s->window[w].blendeq = 0xC2;
+ exynos4210_fimd_update_win_bppmode(s, w);
+ exynos4210_fimd_trace_bppmode(s, w, 0xFFFFFFFF);
+ fimd_update_get_alpha(s, w);
+ }
+
+ if (s->ifb != NULL) {
+ g_free(s->ifb);
+ }
+ s->ifb = NULL;
+
+ exynos4210_fimd_invalidate(s);
+ exynos4210_fimd_enable(s, false);
+ /* Some registers have non-zero initial values */
+ s->winchmap = 0x7D517D51;
+ s->colorgaincon = 0x10040100;
+ s->huecoef_cr[0] = s->huecoef_cr[3] = 0x01000100;
+ s->huecoef_cb[0] = s->huecoef_cb[3] = 0x01000100;
+ s->hueoffset = 0x01800080;
+}
+
+static void exynos4210_fimd_write(void *opaque, target_phys_addr_t offset,
+ uint64_t val, unsigned size)
+{
+ Exynos4210fimdState *s = (Exynos4210fimdState *)opaque;
+ unsigned w, i;
+ uint32_t old_value;
+
+ DPRINT_L2("write offset 0x%08x, value=%llu(0x%08llx)\n", offset,
+ (long long unsigned int)val, (long long unsigned int)val);
+
+ switch (offset) {
+ case FIMD_VIDCON0:
+ if ((val & FIMD_VIDCON0_ENVID_MASK) == FIMD_VIDCON0_ENVID_MASK) {
+ exynos4210_fimd_enable(s, true);
+ } else {
+ if ((val & FIMD_VIDCON0_ENVID) == 0) {
+ exynos4210_fimd_enable(s, false);
+ }
+ }
+ s->vidcon[0] = val;
+ break;
+ case FIMD_VIDCON1:
+ /* Leave read-only bits as is */
+ val = (val & (~FIMD_VIDCON1_ROMASK)) |
+ (s->vidcon[1] & FIMD_VIDCON1_ROMASK);
+ s->vidcon[1] = val;
+ break;
+ case FIMD_VIDCON2 ... FIMD_VIDCON3:
+ s->vidcon[(offset) >> 2] = val;
+ break;
+ case FIMD_VIDTCON_START ... FIMD_VIDTCON_END:
+ s->vidtcon[(offset - FIMD_VIDTCON_START) >> 2] = val;
+ break;
+ case FIMD_WINCON_START ... FIMD_WINCON_END:
+ w = (offset - FIMD_WINCON_START) >> 2;
+ /* Window's current buffer ID */
+ i = fimd_get_buffer_id(&s->window[w]);
+ old_value = s->window[w].wincon;
+ val = (val & ~FIMD_WINCON_ROMASK) |
+ (s->window[w].wincon & FIMD_WINCON_ROMASK);
+ if (w == 0) {
+ /* Window 0 wincon ALPHA_MUL bit must always be 0 */
+ val &= ~FIMD_WINCON_ALPHA_MUL;
+ }
+ exynos4210_fimd_trace_bppmode(s, w, val);
+ switch (val & FIMD_WINCON_BUFSELECT) {
+ case FIMD_WINCON_BUF0_SEL:
+ val &= ~FIMD_WINCON_BUFSTATUS;
+ break;
+ case FIMD_WINCON_BUF1_SEL:
+ val = (val & ~FIMD_WINCON_BUFSTAT_H) | FIMD_WINCON_BUFSTAT_L;
+ break;
+ case FIMD_WINCON_BUF2_SEL:
+ if (val & FIMD_WINCON_BUFMODE) {
+ val = (val & ~FIMD_WINCON_BUFSTAT_L) | FIMD_WINCON_BUFSTAT_H;
+ }
+ break;
+ default:
+ break;
+ }
+ s->window[w].wincon = val;
+ exynos4210_fimd_update_win_bppmode(s, w);
+ fimd_update_get_alpha(s, w);
+ if ((i != fimd_get_buffer_id(&s->window[w])) ||
+ (!(old_value & FIMD_WINCON_ENWIN) && (s->window[w].wincon &
+ FIMD_WINCON_ENWIN))) {
+ fimd_update_memory_section(s, w);
+ }
+ break;
+ case FIMD_SHADOWCON:
+ old_value = s->shadowcon;
+ s->shadowcon = val;
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ if (FIMD_WINDOW_PROTECTED(old_value, w) &&
+ !FIMD_WINDOW_PROTECTED(s->shadowcon, w)) {
+ fimd_update_memory_section(s, w);
+ }
+ }
+ break;
+ case FIMD_WINCHMAP:
+ s->winchmap = val;
+ break;
+ case FIMD_VIDOSD_START ... FIMD_VIDOSD_END:
+ w = (offset - FIMD_VIDOSD_START) >> 4;
+ i = ((offset - FIMD_VIDOSD_START) & 0xF) >> 2;
+ switch (i) {
+ case 0:
+ old_value = s->window[w].lefttop_y;
+ s->window[w].lefttop_x = (val >> FIMD_VIDOSD_HOR_SHIFT) &
+ FIMD_VIDOSD_COORD_MASK;
+ s->window[w].lefttop_y = (val >> FIMD_VIDOSD_VER_SHIFT) &
+ FIMD_VIDOSD_COORD_MASK;
+ if (s->window[w].lefttop_y != old_value) {
+ fimd_update_memory_section(s, w);
+ }
+ break;
+ case 1:
+ old_value = s->window[w].rightbot_y;
+ s->window[w].rightbot_x = (val >> FIMD_VIDOSD_HOR_SHIFT) &
+ FIMD_VIDOSD_COORD_MASK;
+ s->window[w].rightbot_y = (val >> FIMD_VIDOSD_VER_SHIFT) &
+ FIMD_VIDOSD_COORD_MASK;
+ if (s->window[w].rightbot_y != old_value) {
+ fimd_update_memory_section(s, w);
+ }
+ break;
+ case 2:
+ if (w == 0) {
+ s->window[w].osdsize = val;
+ } else {
+ s->window[w].alpha_val[0] =
+ unpack_upper_4((val & FIMD_VIDOSD_ALPHA_AEN0) >>
+ FIMD_VIDOSD_AEN0_SHIFT) |
+ (s->window[w].alpha_val[0] & FIMD_VIDALPHA_ALPHA_LOWER);
+ s->window[w].alpha_val[1] =
+ unpack_upper_4(val & FIMD_VIDOSD_ALPHA_AEN1) |
+ (s->window[w].alpha_val[1] & FIMD_VIDALPHA_ALPHA_LOWER);
+ }
+ break;
+ case 3:
+ if (w != 1 && w != 2) {
+ DPRINT_ERROR("Bad write offset 0x%08x\n", offset);
+ return;
+ }
+ s->window[w].osdsize = val;
+ break;
+ }
+ break;
+ case FIMD_VIDWADD0_START ... FIMD_VIDWADD0_END:
+ w = (offset - FIMD_VIDWADD0_START) >> 3;
+ i = ((offset - FIMD_VIDWADD0_START) >> 2) & 1;
+ if (i == fimd_get_buffer_id(&s->window[w]) &&
+ s->window[w].buf_start[i] != val) {
+ s->window[w].buf_start[i] = val;
+ fimd_update_memory_section(s, w);
+ break;
+ }
+ s->window[w].buf_start[i] = val;
+ break;
+ case FIMD_VIDWADD1_START ... FIMD_VIDWADD1_END:
+ w = (offset - FIMD_VIDWADD1_START) >> 3;
+ i = ((offset - FIMD_VIDWADD1_START) >> 2) & 1;
+ s->window[w].buf_end[i] = val;
+ break;
+ case FIMD_VIDWADD2_START ... FIMD_VIDWADD2_END:
+ w = (offset - FIMD_VIDWADD2_START) >> 2;
+ if (((val & FIMD_VIDWADD2_PAGEWIDTH) != s->window[w].virtpage_width) ||
+ (((val >> FIMD_VIDWADD2_OFFSIZE_SHIFT) & FIMD_VIDWADD2_OFFSIZE) !=
+ s->window[w].virtpage_offsize)) {
+ s->window[w].virtpage_width = val & FIMD_VIDWADD2_PAGEWIDTH;
+ s->window[w].virtpage_offsize =
+ (val >> FIMD_VIDWADD2_OFFSIZE_SHIFT) & FIMD_VIDWADD2_OFFSIZE;
+ fimd_update_memory_section(s, w);
+ }
+ break;
+ case FIMD_VIDINTCON0:
+ s->vidintcon[0] = val;
+ break;
+ case FIMD_VIDINTCON1:
+ s->vidintcon[1] &= ~(val & 7);
+ exynos4210_fimd_update_irq(s);
+ break;
+ case FIMD_WKEYCON_START ... FIMD_WKEYCON_END:
+ w = ((offset - FIMD_WKEYCON_START) >> 3) + 1;
+ i = ((offset - FIMD_WKEYCON_START) >> 2) & 1;
+ s->window[w].keycon[i] = val;
+ break;
+ case FIMD_WKEYALPHA_START ... FIMD_WKEYALPHA_END:
+ w = ((offset - FIMD_WKEYALPHA_START) >> 2) + 1;
+ s->window[w].keyalpha = val;
+ break;
+ case FIMD_DITHMODE:
+ s->dithmode = val;
+ break;
+ case FIMD_WINMAP_START ... FIMD_WINMAP_END:
+ w = (offset - FIMD_WINMAP_START) >> 2;
+ old_value = s->window[w].winmap;
+ s->window[w].winmap = val;
+ if ((val & FIMD_WINMAP_EN) ^ (old_value & FIMD_WINMAP_EN)) {
+ exynos4210_fimd_invalidate(s);
+ exynos4210_fimd_update_win_bppmode(s, w);
+ exynos4210_fimd_trace_bppmode(s, w, 0xFFFFFFFF);
+ exynos4210_fimd_update(s);
+ }
+ break;
+ case FIMD_WPALCON_HIGH ... FIMD_WPALCON_LOW:
+ i = (offset - FIMD_WPALCON_HIGH) >> 2;
+ s->wpalcon[i] = val;
+ if (s->wpalcon[1] & FIMD_WPALCON_UPDATEEN) {
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ exynos4210_fimd_update_win_bppmode(s, w);
+ fimd_update_get_alpha(s, w);
+ }
+ }
+ break;
+ case FIMD_TRIGCON:
+ val = (val & ~FIMD_TRIGCON_ROMASK) | (s->trigcon & FIMD_TRIGCON_ROMASK);
+ s->trigcon = val;
+ break;
+ case FIMD_I80IFCON_START ... FIMD_I80IFCON_END:
+ s->i80ifcon[(offset - FIMD_I80IFCON_START) >> 2] = val;
+ break;
+ case FIMD_COLORGAINCON:
+ s->colorgaincon = val;
+ break;
+ case FIMD_LDI_CMDCON0 ... FIMD_LDI_CMDCON1:
+ s->ldi_cmdcon[(offset - FIMD_LDI_CMDCON0) >> 2] = val;
+ break;
+ case FIMD_SIFCCON0 ... FIMD_SIFCCON2:
+ i = (offset - FIMD_SIFCCON0) >> 2;
+ if (i != 2) {
+ s->sifccon[i] = val;
+ }
+ break;
+ case FIMD_HUECOEFCR_START ... FIMD_HUECOEFCR_END:
+ i = (offset - FIMD_HUECOEFCR_START) >> 2;
+ s->huecoef_cr[i] = val;
+ break;
+ case FIMD_HUECOEFCB_START ... FIMD_HUECOEFCB_END:
+ i = (offset - FIMD_HUECOEFCB_START) >> 2;
+ s->huecoef_cb[i] = val;
+ break;
+ case FIMD_HUEOFFSET:
+ s->hueoffset = val;
+ break;
+ case FIMD_VIDWALPHA_START ... FIMD_VIDWALPHA_END:
+ w = ((offset - FIMD_VIDWALPHA_START) >> 3);
+ i = ((offset - FIMD_VIDWALPHA_START) >> 2) & 1;
+ if (w == 0) {
+ s->window[w].alpha_val[i] = val;
+ } else {
+ s->window[w].alpha_val[i] = (val & FIMD_VIDALPHA_ALPHA_LOWER) |
+ (s->window[w].alpha_val[i] & FIMD_VIDALPHA_ALPHA_UPPER);
+ }
+ break;
+ case FIMD_BLENDEQ_START ... FIMD_BLENDEQ_END:
+ s->window[(offset - FIMD_BLENDEQ_START) >> 2].blendeq = val;
+ break;
+ case FIMD_BLENDCON:
+ old_value = s->blendcon;
+ s->blendcon = val;
+ if ((s->blendcon & FIMD_ALPHA_8BIT) != (old_value & FIMD_ALPHA_8BIT)) {
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ fimd_update_get_alpha(s, w);
+ }
+ }
+ break;
+ case FIMD_WRTQOSCON_START ... FIMD_WRTQOSCON_END:
+ s->window[(offset - FIMD_WRTQOSCON_START) >> 2].rtqoscon = val;
+ break;
+ case FIMD_I80IFCMD_START ... FIMD_I80IFCMD_END:
+ s->i80ifcmd[(offset - FIMD_I80IFCMD_START) >> 2] = val;
+ break;
+ case FIMD_VIDW0ADD0_B2 ... FIMD_VIDW4ADD0_B2:
+ if (offset & 0x0004) {
+ DPRINT_ERROR("bad write offset 0x%08x\n", offset);
+ break;
+ }
+ w = (offset - FIMD_VIDW0ADD0_B2) >> 3;
+ if (fimd_get_buffer_id(&s->window[w]) == 2 &&
+ s->window[w].buf_start[2] != val) {
+ s->window[w].buf_start[2] = val;
+ fimd_update_memory_section(s, w);
+ break;
+ }
+ s->window[w].buf_start[2] = val;
+ break;
+ case FIMD_SHD_ADD0_START ... FIMD_SHD_ADD0_END:
+ if (offset & 0x0004) {
+ DPRINT_ERROR("bad write offset 0x%08x\n", offset);
+ break;
+ }
+ s->window[(offset - FIMD_SHD_ADD0_START) >> 3].shadow_buf_start = val;
+ break;
+ case FIMD_SHD_ADD1_START ... FIMD_SHD_ADD1_END:
+ if (offset & 0x0004) {
+ DPRINT_ERROR("bad write offset 0x%08x\n", offset);
+ break;
+ }
+ s->window[(offset - FIMD_SHD_ADD1_START) >> 3].shadow_buf_end = val;
+ break;
+ case FIMD_SHD_ADD2_START ... FIMD_SHD_ADD2_END:
+ s->window[(offset - FIMD_SHD_ADD2_START) >> 2].shadow_buf_size = val;
+ break;
+ case FIMD_PAL_MEM_START ... FIMD_PAL_MEM_END:
+ w = (offset - FIMD_PAL_MEM_START) >> 10;
+ i = ((offset - FIMD_PAL_MEM_START) >> 2) & 0xFF;
+ s->window[w].palette[i] = val;
+ break;
+ case FIMD_PALMEM_AL_START ... FIMD_PALMEM_AL_END:
+ /* Palette memory aliases for windows 0 and 1 */
+ w = (offset - FIMD_PALMEM_AL_START) >> 10;
+ i = ((offset - FIMD_PALMEM_AL_START) >> 2) & 0xFF;
+ s->window[w].palette[i] = val;
+ break;
+ default:
+ DPRINT_ERROR("bad write offset 0x%08x\n", offset);
+ break;
+ }
+}
+
+static uint64_t exynos4210_fimd_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ Exynos4210fimdState *s = (Exynos4210fimdState *)opaque;
+ int w, i;
+ uint32_t ret = 0;
+
+ DPRINT_L2("read offset 0x%08x\n", offset);
+
+ switch (offset) {
+ case FIMD_VIDCON0 ... FIMD_VIDCON3:
+ return s->vidcon[(offset - FIMD_VIDCON0) >> 2];
+ case FIMD_VIDTCON_START ... FIMD_VIDTCON_END:
+ return s->vidtcon[(offset - FIMD_VIDTCON_START) >> 2];
+ case FIMD_WINCON_START ... FIMD_WINCON_END:
+ return s->window[(offset - FIMD_WINCON_START) >> 2].wincon;
+ case FIMD_SHADOWCON:
+ return s->shadowcon;
+ case FIMD_WINCHMAP:
+ return s->winchmap;
+ case FIMD_VIDOSD_START ... FIMD_VIDOSD_END:
+ w = (offset - FIMD_VIDOSD_START) >> 4;
+ i = ((offset - FIMD_VIDOSD_START) & 0xF) >> 2;
+ switch (i) {
+ case 0:
+ ret = ((s->window[w].lefttop_x & FIMD_VIDOSD_COORD_MASK) <<
+ FIMD_VIDOSD_HOR_SHIFT) |
+ (s->window[w].lefttop_y & FIMD_VIDOSD_COORD_MASK);
+ break;
+ case 1:
+ ret = ((s->window[w].rightbot_x & FIMD_VIDOSD_COORD_MASK) <<
+ FIMD_VIDOSD_HOR_SHIFT) |
+ (s->window[w].rightbot_y & FIMD_VIDOSD_COORD_MASK);
+ break;
+ case 2:
+ if (w == 0) {
+ ret = s->window[w].osdsize;
+ } else {
+ ret = (pack_upper_4(s->window[w].alpha_val[0]) <<
+ FIMD_VIDOSD_AEN0_SHIFT) |
+ pack_upper_4(s->window[w].alpha_val[1]);
+ }
+ break;
+ case 3:
+ if (w != 1 && w != 2) {
+ DPRINT_ERROR("bad read offset 0x%08x\n", offset);
+ return 0xBAADBAAD;
+ }
+ ret = s->window[w].osdsize;
+ break;
+ }
+ return ret;
+ case FIMD_VIDWADD0_START ... FIMD_VIDWADD0_END:
+ w = (offset - FIMD_VIDWADD0_START) >> 3;
+ i = ((offset - FIMD_VIDWADD0_START) >> 2) & 1;
+ return s->window[w].buf_start[i];
+ case FIMD_VIDWADD1_START ... FIMD_VIDWADD1_END:
+ w = (offset - FIMD_VIDWADD1_START) >> 3;
+ i = ((offset - FIMD_VIDWADD1_START) >> 2) & 1;
+ return s->window[w].buf_end[i];
+ case FIMD_VIDWADD2_START ... FIMD_VIDWADD2_END:
+ w = (offset - FIMD_VIDWADD2_START) >> 2;
+ return s->window[w].virtpage_width | (s->window[w].virtpage_offsize <<
+ FIMD_VIDWADD2_OFFSIZE_SHIFT);
+ case FIMD_VIDINTCON0 ... FIMD_VIDINTCON1:
+ return s->vidintcon[(offset - FIMD_VIDINTCON0) >> 2];
+ case FIMD_WKEYCON_START ... FIMD_WKEYCON_END:
+ w = ((offset - FIMD_WKEYCON_START) >> 3) + 1;
+ i = ((offset - FIMD_WKEYCON_START) >> 2) & 1;
+ return s->window[w].keycon[i];
+ case FIMD_WKEYALPHA_START ... FIMD_WKEYALPHA_END:
+ w = ((offset - FIMD_WKEYALPHA_START) >> 2) + 1;
+ return s->window[w].keyalpha;
+ case FIMD_DITHMODE:
+ return s->dithmode;
+ case FIMD_WINMAP_START ... FIMD_WINMAP_END:
+ return s->window[(offset - FIMD_WINMAP_START) >> 2].winmap;
+ case FIMD_WPALCON_HIGH ... FIMD_WPALCON_LOW:
+ return s->wpalcon[(offset - FIMD_WPALCON_HIGH) >> 2];
+ case FIMD_TRIGCON:
+ return s->trigcon;
+ case FIMD_I80IFCON_START ... FIMD_I80IFCON_END:
+ return s->i80ifcon[(offset - FIMD_I80IFCON_START) >> 2];
+ case FIMD_COLORGAINCON:
+ return s->colorgaincon;
+ case FIMD_LDI_CMDCON0 ... FIMD_LDI_CMDCON1:
+ return s->ldi_cmdcon[(offset - FIMD_LDI_CMDCON0) >> 2];
+ case FIMD_SIFCCON0 ... FIMD_SIFCCON2:
+ i = (offset - FIMD_SIFCCON0) >> 2;
+ return s->sifccon[i];
+ case FIMD_HUECOEFCR_START ... FIMD_HUECOEFCR_END:
+ i = (offset - FIMD_HUECOEFCR_START) >> 2;
+ return s->huecoef_cr[i];
+ case FIMD_HUECOEFCB_START ... FIMD_HUECOEFCB_END:
+ i = (offset - FIMD_HUECOEFCB_START) >> 2;
+ return s->huecoef_cb[i];
+ case FIMD_HUEOFFSET:
+ return s->hueoffset;
+ case FIMD_VIDWALPHA_START ... FIMD_VIDWALPHA_END:
+ w = ((offset - FIMD_VIDWALPHA_START) >> 3);
+ i = ((offset - FIMD_VIDWALPHA_START) >> 2) & 1;
+ return s->window[w].alpha_val[i] &
+ (w == 0 ? 0xFFFFFF : FIMD_VIDALPHA_ALPHA_LOWER);
+ case FIMD_BLENDEQ_START ... FIMD_BLENDEQ_END:
+ return s->window[(offset - FIMD_BLENDEQ_START) >> 2].blendeq;
+ case FIMD_BLENDCON:
+ return s->blendcon;
+ case FIMD_WRTQOSCON_START ... FIMD_WRTQOSCON_END:
+ return s->window[(offset - FIMD_WRTQOSCON_START) >> 2].rtqoscon;
+ case FIMD_I80IFCMD_START ... FIMD_I80IFCMD_END:
+ return s->i80ifcmd[(offset - FIMD_I80IFCMD_START) >> 2];
+ case FIMD_VIDW0ADD0_B2 ... FIMD_VIDW4ADD0_B2:
+ if (offset & 0x0004) {
+ break;
+ }
+ return s->window[(offset - FIMD_VIDW0ADD0_B2) >> 3].buf_start[2];
+ case FIMD_SHD_ADD0_START ... FIMD_SHD_ADD0_END:
+ if (offset & 0x0004) {
+ break;
+ }
+ return s->window[(offset - FIMD_SHD_ADD0_START) >> 3].shadow_buf_start;
+ case FIMD_SHD_ADD1_START ... FIMD_SHD_ADD1_END:
+ if (offset & 0x0004) {
+ break;
+ }
+ return s->window[(offset - FIMD_SHD_ADD1_START) >> 3].shadow_buf_end;
+ case FIMD_SHD_ADD2_START ... FIMD_SHD_ADD2_END:
+ return s->window[(offset - FIMD_SHD_ADD2_START) >> 2].shadow_buf_size;
+ case FIMD_PAL_MEM_START ... FIMD_PAL_MEM_END:
+ w = (offset - FIMD_PAL_MEM_START) >> 10;
+ i = ((offset - FIMD_PAL_MEM_START) >> 2) & 0xFF;
+ return s->window[w].palette[i];
+ case FIMD_PALMEM_AL_START ... FIMD_PALMEM_AL_END:
+ /* Palette aliases for win 0,1 */
+ w = (offset - FIMD_PALMEM_AL_START) >> 10;
+ i = ((offset - FIMD_PALMEM_AL_START) >> 2) & 0xFF;
+ return s->window[w].palette[i];
+ }
+
+ DPRINT_ERROR("bad read offset 0x%08x\n", offset);
+ return 0xBAADBAAD;
+}
+
+static const MemoryRegionOps exynos4210_fimd_mmio_ops = {
+ .read = exynos4210_fimd_read,
+ .write = exynos4210_fimd_write,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int exynos4210_fimd_load(void *opaque, int version_id)
+{
+ Exynos4210fimdState *s = (Exynos4210fimdState *)opaque;
+ int w;
+
+ if (version_id != 1) {
+ return -EINVAL;
+ }
+
+ for (w = 0; w < NUM_OF_WINDOWS; w++) {
+ exynos4210_fimd_update_win_bppmode(s, w);
+ fimd_update_get_alpha(s, w);
+ fimd_update_memory_section(s, w);
+ }
+
+ /* Redraw the whole screen */
+ exynos4210_update_resolution(s);
+ exynos4210_fimd_invalidate(s);
+ exynos4210_fimd_enable(s, (s->vidcon[0] & FIMD_VIDCON0_ENVID_MASK) ==
+ FIMD_VIDCON0_ENVID_MASK);
+ return 0;
+}
+
+static const VMStateDescription exynos4210_fimd_window_vmstate = {
+ .name = "exynos4210.fimd_window",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(wincon, Exynos4210fimdWindow),
+ VMSTATE_UINT32_ARRAY(buf_start, Exynos4210fimdWindow, 3),
+ VMSTATE_UINT32_ARRAY(buf_end, Exynos4210fimdWindow, 3),
+ VMSTATE_UINT32_ARRAY(keycon, Exynos4210fimdWindow, 2),
+ VMSTATE_UINT32(keyalpha, Exynos4210fimdWindow),
+ VMSTATE_UINT32(winmap, Exynos4210fimdWindow),
+ VMSTATE_UINT32(blendeq, Exynos4210fimdWindow),
+ VMSTATE_UINT32(rtqoscon, Exynos4210fimdWindow),
+ VMSTATE_UINT32_ARRAY(palette, Exynos4210fimdWindow, 256),
+ VMSTATE_UINT32(shadow_buf_start, Exynos4210fimdWindow),
+ VMSTATE_UINT32(shadow_buf_end, Exynos4210fimdWindow),
+ VMSTATE_UINT32(shadow_buf_size, Exynos4210fimdWindow),
+ VMSTATE_UINT16(lefttop_x, Exynos4210fimdWindow),
+ VMSTATE_UINT16(lefttop_y, Exynos4210fimdWindow),
+ VMSTATE_UINT16(rightbot_x, Exynos4210fimdWindow),
+ VMSTATE_UINT16(rightbot_y, Exynos4210fimdWindow),
+ VMSTATE_UINT32(osdsize, Exynos4210fimdWindow),
+ VMSTATE_UINT32_ARRAY(alpha_val, Exynos4210fimdWindow, 2),
+ VMSTATE_UINT16(virtpage_width, Exynos4210fimdWindow),
+ VMSTATE_UINT16(virtpage_offsize, Exynos4210fimdWindow),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription exynos4210_fimd_vmstate = {
+ .name = "exynos4210.fimd",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = exynos4210_fimd_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(vidcon, Exynos4210fimdState, 4),
+ VMSTATE_UINT32_ARRAY(vidtcon, Exynos4210fimdState, 4),
+ VMSTATE_UINT32(shadowcon, Exynos4210fimdState),
+ VMSTATE_UINT32(winchmap, Exynos4210fimdState),
+ VMSTATE_UINT32_ARRAY(vidintcon, Exynos4210fimdState, 2),
+ VMSTATE_UINT32(dithmode, Exynos4210fimdState),
+ VMSTATE_UINT32_ARRAY(wpalcon, Exynos4210fimdState, 2),
+ VMSTATE_UINT32(trigcon, Exynos4210fimdState),
+ VMSTATE_UINT32_ARRAY(i80ifcon, Exynos4210fimdState, 4),
+ VMSTATE_UINT32(colorgaincon, Exynos4210fimdState),
+ VMSTATE_UINT32_ARRAY(ldi_cmdcon, Exynos4210fimdState, 2),
+ VMSTATE_UINT32_ARRAY(sifccon, Exynos4210fimdState, 3),
+ VMSTATE_UINT32_ARRAY(huecoef_cr, Exynos4210fimdState, 4),
+ VMSTATE_UINT32_ARRAY(huecoef_cb, Exynos4210fimdState, 4),
+ VMSTATE_UINT32(hueoffset, Exynos4210fimdState),
+ VMSTATE_UINT32_ARRAY(i80ifcmd, Exynos4210fimdState, 12),
+ VMSTATE_UINT32(blendcon, Exynos4210fimdState),
+ VMSTATE_STRUCT_ARRAY(window, Exynos4210fimdState, 5, 1,
+ exynos4210_fimd_window_vmstate, Exynos4210fimdWindow),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int exynos4210_fimd_init(SysBusDevice *dev)
+{
+ Exynos4210fimdState *s = FROM_SYSBUS(Exynos4210fimdState, dev);
+
+ s->ifb = NULL;
+
+ sysbus_init_irq(dev, &s->irq[0]);
+ sysbus_init_irq(dev, &s->irq[1]);
+ sysbus_init_irq(dev, &s->irq[2]);
+
+ memory_region_init_io(&s->iomem, &exynos4210_fimd_mmio_ops, s,
+ "exynos4210.fimd", FIMD_REGS_SIZE);
+ sysbus_init_mmio(dev, &s->iomem);
+ s->console = graphic_console_init(exynos4210_fimd_update,
+ exynos4210_fimd_invalidate, NULL, NULL, s);
+
+ return 0;
+}
+
+static SysBusDeviceInfo exynos4210_fimd_info = {
+ .init = exynos4210_fimd_init,
+ .qdev.name = "exynos4210.fimd",
+ .qdev.size = sizeof(Exynos4210fimdState),
+ .qdev.vmsd = &exynos4210_fimd_vmstate,
+ .qdev.reset = exynos4210_fimd_reset,
+};
+
+static void exynos4210_fimd_register_devices(void)
+{
+ sysbus_register_withprop(&exynos4210_fimd_info);
+}
+
+device_init(exynos4210_fimd_register_devices)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 13+ messages in thread