All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cousson, Benoit" <b-cousson@ti.com>
To: Rob Herring <robherring2@gmail.com>
Cc: grant.likely@secretlab.ca, devicetree-discuss@lists.ozlabs.org,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4] spi/omap: Add DT support to McSPI driver
Date: Wed, 15 Feb 2012 22:10:37 +0100	[thread overview]
Message-ID: <4F3C1F4D.7070700@ti.com> (raw)
In-Reply-To: <4F3C08D6.6000108@gmail.com>

On 2/15/2012 8:34 PM, Rob Herring wrote:
> On 02/15/2012 11:37 AM, Benoit Cousson wrote:
>> Add device tree support to the OMAP2+ McSPI driver.
>> Add the bindings documentation.
>>
>> Based on original code from Rajendra.
>>
>> Signed-off-by: Benoit Cousson<b-cousson@ti.com>
>> Cc: Grant Likely<grant.likely@secretlab.ca>
>> Cc: Rajendra Nayak<rnayak@ti.com>
>> ---
>>   Documentation/devicetree/bindings/spi/omap-spi.txt |   20 +++++++
>>   drivers/spi/spi-omap2-mcspi.c                      |   56 +++++++++++++++++---
>>   2 files changed, 68 insertions(+), 8 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> new file mode 100644
>> index 0000000..81df374
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> @@ -0,0 +1,20 @@
>> +OMAP2+ McSPI device
>> +
>> +Required properties:
>> +- compatible :
>> +  - "ti,omap2-spi" for OMAP2&  OMAP3.
>> +  - "ti,omap4-spi" for OMAP4+.
>> +- ti,spi-num-cs : Number of chipselect supported  by the instance.
>> +- ti,hwmods: Name of the hwmod associated to the McSPI
>> +
>> +
>> +Example:
>> +
>> +mcspi1: mcspi@1 {
>
> I don't recall if there's a generic name defined but just "spi" would
> probably be better.

I was wondering as well, but based on Grant further comment it looks it 
is the case.
I couldn't find any list of generic name in the bindings documentation. 
Is there some place we can get that?

> Also, shouldn't this be the base address?

Yeah, it should, I've just explained the reason of this OMAP 
irregularity in my answer to Grant. Let see if he'll be convinced or not :-)

> Otherwise, for the series:
>
> Acked-by: Rob Herring<rob.herring@calxeda.com>

Thanks,
Benoit

>
>
>> +    #address-cells =<1>;
>> +    #size-cells =<0>;
>> +    compatible = "ti,omap4-mcspi";
>> +    ti,hwmods = "mcspi1";
>> +    ti,spi-num-cs =<4>;
>> +};
>> +
>> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
>> index 0b0dfb7..bb9274c 100644
>> --- a/drivers/spi/spi-omap2-mcspi.c
>> +++ b/drivers/spi/spi-omap2-mcspi.c
>> @@ -34,6 +34,8 @@
>>   #include<linux/io.h>
>>   #include<linux/slab.h>
>>   #include<linux/pm_runtime.h>
>> +#include<linux/of.h>
>> +#include<linux/of_device.h>
>>
>>   #include<linux/spi/spi.h>
>>
>> @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device *dev)
>>   	return 0;
>>   }
>>
>> +static struct omap2_mcspi_platform_config omap2_pdata = {
>> +	.regs_offset = 0,
>> +};
>> +
>> +static struct omap2_mcspi_platform_config omap4_pdata = {
>> +	.regs_offset = OMAP4_MCSPI_REG_OFFSET,
>> +};
>> +
>> +static const struct of_device_id omap_mcspi_of_match[] = {
>> +	{
>> +		.compatible = "ti,omap2-mcspi",
>> +		.data =&omap2_pdata,
>> +	},
>> +	{
>> +		.compatible = "ti,omap4-mcspi",
>> +		.data =&omap4_pdata,
>> +	},
>> +	{ },
>> +};
>> +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
>>
>>   static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   {
>>   	struct spi_master	*master;
>> -	struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
>> +	struct omap2_mcspi_platform_config *pdata;
>>   	struct omap2_mcspi	*mcspi;
>>   	struct resource		*r;
>>   	int			status = 0, i;
>>   	char			wq_name[20];
>> +	u32			regs_offset = 0;
>> +	static int		bus_num = 1;
>> +	struct device_node	*node = pdev->dev.of_node;
>> +	const struct of_device_id *match;
>>
>>   	master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
>>   	if (master == NULL) {
>> @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   	/* the spi->mode bits understood by this driver: */
>>   	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>>
>> -	if (pdev->id != -1)
>> -		master->bus_num = pdev->id;
>> -
>>   	master->setup = omap2_mcspi_setup;
>>   	master->transfer = omap2_mcspi_transfer;
>>   	master->cleanup = omap2_mcspi_cleanup;
>> -	master->num_chipselect = pdata->num_cs;
>> +	master->dev.of_node = node;
>> +
>> +	match = of_match_device(omap_mcspi_of_match,&pdev->dev);
>> +	if (match) {
>> +		u32 num_cs = 1; /* default number of chipselect */
>> +		pdata = match->data;
>> +
>> +		of_property_read_u32(node, "ti,spi-num-cs",&num_cs);
>> +		master->num_chipselect = num_cs;
>> +		master->bus_num = bus_num++;
>> +	} else {
>> +		pdata = pdev->dev.platform_data;
>> +		master->num_chipselect = pdata->num_cs;
>> +		if (pdev->id != -1)
>> +			master->bus_num = pdev->id;
>> +	}
>> +	regs_offset = pdata->regs_offset;
>>
>>   	dev_set_drvdata(&pdev->dev, master);
>>
>> @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   		goto free_master;
>>   	}
>>
>> -	r->start += pdata->regs_offset;
>> -	r->end += pdata->regs_offset;
>> +	r->start += regs_offset;
>> +	r->end += regs_offset;
>>   	mcspi->phys = r->start;
>>   	if (!request_mem_region(r->start, resource_size(r),
>>   				dev_name(&pdev->dev))) {
>> @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = {
>>   	.driver = {
>>   		.name =		"omap2_mcspi",
>>   		.owner =	THIS_MODULE,
>> -		.pm =		&omap2_mcspi_pm_ops
>> +		.pm =		&omap2_mcspi_pm_ops,
>> +		.of_match_table = omap_mcspi_of_match,
>>   	},
>>   	.remove =	__exit_p(omap2_mcspi_remove),
>>   };
>


WARNING: multiple messages have this Message-ID (diff)
From: b-cousson@ti.com (Cousson, Benoit)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] spi/omap: Add DT support to McSPI driver
Date: Wed, 15 Feb 2012 22:10:37 +0100	[thread overview]
Message-ID: <4F3C1F4D.7070700@ti.com> (raw)
In-Reply-To: <4F3C08D6.6000108@gmail.com>

On 2/15/2012 8:34 PM, Rob Herring wrote:
> On 02/15/2012 11:37 AM, Benoit Cousson wrote:
>> Add device tree support to the OMAP2+ McSPI driver.
>> Add the bindings documentation.
>>
>> Based on original code from Rajendra.
>>
>> Signed-off-by: Benoit Cousson<b-cousson@ti.com>
>> Cc: Grant Likely<grant.likely@secretlab.ca>
>> Cc: Rajendra Nayak<rnayak@ti.com>
>> ---
>>   Documentation/devicetree/bindings/spi/omap-spi.txt |   20 +++++++
>>   drivers/spi/spi-omap2-mcspi.c                      |   56 +++++++++++++++++---
>>   2 files changed, 68 insertions(+), 8 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> new file mode 100644
>> index 0000000..81df374
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> @@ -0,0 +1,20 @@
>> +OMAP2+ McSPI device
>> +
>> +Required properties:
>> +- compatible :
>> +  - "ti,omap2-spi" for OMAP2&  OMAP3.
>> +  - "ti,omap4-spi" for OMAP4+.
>> +- ti,spi-num-cs : Number of chipselect supported  by the instance.
>> +- ti,hwmods: Name of the hwmod associated to the McSPI
>> +
>> +
>> +Example:
>> +
>> +mcspi1: mcspi at 1 {
>
> I don't recall if there's a generic name defined but just "spi" would
> probably be better.

I was wondering as well, but based on Grant further comment it looks it 
is the case.
I couldn't find any list of generic name in the bindings documentation. 
Is there some place we can get that?

> Also, shouldn't this be the base address?

Yeah, it should, I've just explained the reason of this OMAP 
irregularity in my answer to Grant. Let see if he'll be convinced or not :-)

> Otherwise, for the series:
>
> Acked-by: Rob Herring<rob.herring@calxeda.com>

Thanks,
Benoit

>
>
>> +    #address-cells =<1>;
>> +    #size-cells =<0>;
>> +    compatible = "ti,omap4-mcspi";
>> +    ti,hwmods = "mcspi1";
>> +    ti,spi-num-cs =<4>;
>> +};
>> +
>> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
>> index 0b0dfb7..bb9274c 100644
>> --- a/drivers/spi/spi-omap2-mcspi.c
>> +++ b/drivers/spi/spi-omap2-mcspi.c
>> @@ -34,6 +34,8 @@
>>   #include<linux/io.h>
>>   #include<linux/slab.h>
>>   #include<linux/pm_runtime.h>
>> +#include<linux/of.h>
>> +#include<linux/of_device.h>
>>
>>   #include<linux/spi/spi.h>
>>
>> @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device *dev)
>>   	return 0;
>>   }
>>
>> +static struct omap2_mcspi_platform_config omap2_pdata = {
>> +	.regs_offset = 0,
>> +};
>> +
>> +static struct omap2_mcspi_platform_config omap4_pdata = {
>> +	.regs_offset = OMAP4_MCSPI_REG_OFFSET,
>> +};
>> +
>> +static const struct of_device_id omap_mcspi_of_match[] = {
>> +	{
>> +		.compatible = "ti,omap2-mcspi",
>> +		.data =&omap2_pdata,
>> +	},
>> +	{
>> +		.compatible = "ti,omap4-mcspi",
>> +		.data =&omap4_pdata,
>> +	},
>> +	{ },
>> +};
>> +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
>>
>>   static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   {
>>   	struct spi_master	*master;
>> -	struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
>> +	struct omap2_mcspi_platform_config *pdata;
>>   	struct omap2_mcspi	*mcspi;
>>   	struct resource		*r;
>>   	int			status = 0, i;
>>   	char			wq_name[20];
>> +	u32			regs_offset = 0;
>> +	static int		bus_num = 1;
>> +	struct device_node	*node = pdev->dev.of_node;
>> +	const struct of_device_id *match;
>>
>>   	master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
>>   	if (master == NULL) {
>> @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   	/* the spi->mode bits understood by this driver: */
>>   	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>>
>> -	if (pdev->id != -1)
>> -		master->bus_num = pdev->id;
>> -
>>   	master->setup = omap2_mcspi_setup;
>>   	master->transfer = omap2_mcspi_transfer;
>>   	master->cleanup = omap2_mcspi_cleanup;
>> -	master->num_chipselect = pdata->num_cs;
>> +	master->dev.of_node = node;
>> +
>> +	match = of_match_device(omap_mcspi_of_match,&pdev->dev);
>> +	if (match) {
>> +		u32 num_cs = 1; /* default number of chipselect */
>> +		pdata = match->data;
>> +
>> +		of_property_read_u32(node, "ti,spi-num-cs",&num_cs);
>> +		master->num_chipselect = num_cs;
>> +		master->bus_num = bus_num++;
>> +	} else {
>> +		pdata = pdev->dev.platform_data;
>> +		master->num_chipselect = pdata->num_cs;
>> +		if (pdev->id != -1)
>> +			master->bus_num = pdev->id;
>> +	}
>> +	regs_offset = pdata->regs_offset;
>>
>>   	dev_set_drvdata(&pdev->dev, master);
>>
>> @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   		goto free_master;
>>   	}
>>
>> -	r->start += pdata->regs_offset;
>> -	r->end += pdata->regs_offset;
>> +	r->start += regs_offset;
>> +	r->end += regs_offset;
>>   	mcspi->phys = r->start;
>>   	if (!request_mem_region(r->start, resource_size(r),
>>   				dev_name(&pdev->dev))) {
>> @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = {
>>   	.driver = {
>>   		.name =		"omap2_mcspi",
>>   		.owner =	THIS_MODULE,
>> -		.pm =		&omap2_mcspi_pm_ops
>> +		.pm =		&omap2_mcspi_pm_ops,
>> +		.of_match_table = omap_mcspi_of_match,
>>   	},
>>   	.remove =	__exit_p(omap2_mcspi_remove),
>>   };
>

  parent reply	other threads:[~2012-02-15 21:10 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-15 17:37 [PATCH 0/4] spi/omap: Adaptation to Device Tree Benoit Cousson
2012-02-15 17:37 ` Benoit Cousson
2012-02-15 17:37 ` [PATCH 1/4] spi/omap: Add DT support to McSPI driver Benoit Cousson
2012-02-15 17:37   ` Benoit Cousson
2012-02-15 19:34   ` Rob Herring
2012-02-15 19:34     ` Rob Herring
2012-02-15 20:04     ` Grant Likely
2012-02-15 20:04       ` Grant Likely
2012-02-15 21:10     ` Cousson, Benoit [this message]
2012-02-15 21:10       ` Cousson, Benoit
2012-02-15 17:37 ` [PATCH 2/4] arm/dts: OMAP4: Add SPI controller nodes Benoit Cousson
2012-02-15 17:37   ` Benoit Cousson
2012-02-15 20:02   ` Grant Likely
2012-02-15 20:02     ` Grant Likely
     [not found]     ` <20120215200240.GA25779-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2012-02-15 21:00       ` Cousson, Benoit
2012-02-15 21:00         ` Cousson, Benoit
2012-02-15 17:37 ` [PATCH 3/4] arm/dts: OMAP3: " Benoit Cousson
2012-02-15 17:37   ` Benoit Cousson
2012-02-15 17:37 ` [PATCH 4/4] arm/dts: omap4-sdp: Add ks8851 ethernet SPI device Benoit Cousson
2012-02-15 17:37   ` Benoit Cousson
2012-02-15 20:03 ` [PATCH 0/4] spi/omap: Adaptation to Device Tree Grant Likely
2012-02-15 20:03   ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F3C1F4D.7070700@ti.com \
    --to=b-cousson@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robherring2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.