Triple implementation of WM8766 and quadruple WM8776!

Triple implementation of WM8766 and quadruple WM8776!

[Ondrej Zary]

Hello,
I'm trying do implement support for Philips PSC724 Ultimate Edge card, which 
is based on VT1722 + WM8776 + WM8766 chips. Found that the best file to base 
my work on is sound/pci/ice1712/se.c (as SE-200PCI card contains both WM8776 
and WM8766 chips).

While doing this, found that there are three implementations of WM8766 codec 
control, two of them in the same driver(!):
sound/pci/ice1712/se.c
sound/pci/ice1712/prodigy_hifi.c
sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8766.h)

And WM8776 status is even worse, there are four implementations, again two 
being in the same driver:
sound/pci/ice1712/se.c
sound/pci/ice1712/maya44.c
sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8776.h)
sound/soc/codecs/wm8776.c (this one being official and stand-alone module but 
it does not seem to be usable as a part of sound card driver)

My code would enlarge both of these lists and I don't like that. What to do?

-- 
Ondrej Zary

Re: Triple implementation of WM8766 and quadruple WM8776!

[Clemens Ladisch]

Ondrej Zary wrote:
> I'm trying do implement support for Philips PSC724 Ultimate Edge card, which
> is based on VT1722 + WM8776 + WM8766 chips. Found that the best file to base
> my work on is sound/pci/ice1712/se.c (as SE-200PCI card contains both WM8776
> and WM8766 chips).
>
> While doing this, found that there are three implementations of WM8766 codec
> control, two of them in the same driver(!):
> sound/pci/ice1712/se.c
> sound/pci/ice1712/prodigy_hifi.c
> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8766.h)
>
> And WM8776 status is even worse, there are four implementations, again two
> being in the same driver:
> sound/pci/ice1712/se.c
> sound/pci/ice1712/maya44.c
> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8776.h)
> sound/soc/codecs/wm8776.c (this one being official and stand-alone module but
> it does not seem to be usable as a part of sound card driver)

The ALSA SoC framework differentiates between three kinds of drivers:
codec, platform (controllers like the VT1722), and machine (in your
case, the wiring on the PSC724).  When I wrote the oxygen driver,
I didn't use ASoC because it didn't support multiple codecs per card
at that time (now it does).

I'd suggest to use ASoC, except that ice1724 is not an ASoC platform
driver, so you'd have to duplicate it.

All the non-ASoC drivers mix codec and machine drivers in the same file.
In the long term, ice1712 and oxygen should be converted to use ASoC,
but that would be a lot of effort if regressions are to be avoided.

I'd suggest to move the common parts of the three ice1712 drivers into
separate files.  You could make the interface of those files similar to
ASoC codec drivers to make later porting easier.


Regards,
Clemens

Re: [alsa-devel] Triple implementation of WM8766 and quadruple WM8776!

[Clemens Ladisch]

Ondrej Zary wrote:
> I'm trying do implement support for Philips PSC724 Ultimate Edge card, which
> is based on VT1722 + WM8776 + WM8766 chips. Found that the best file to base
> my work on is sound/pci/ice1712/se.c (as SE-200PCI card contains both WM8776
> and WM8766 chips).
>
> While doing this, found that there are three implementations of WM8766 codec
> control, two of them in the same driver(!):
> sound/pci/ice1712/se.c
> sound/pci/ice1712/prodigy_hifi.c
> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8766.h)
>
> And WM8776 status is even worse, there are four implementations, again two
> being in the same driver:
> sound/pci/ice1712/se.c
> sound/pci/ice1712/maya44.c
> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8776.h)
> sound/soc/codecs/wm8776.c (this one being official and stand-alone module but
> it does not seem to be usable as a part of sound card driver)

The ALSA SoC framework differentiates between three kinds of drivers:
codec, platform (controllers like the VT1722), and machine (in your
case, the wiring on the PSC724).  When I wrote the oxygen driver,
I didn't use ASoC because it didn't support multiple codecs per card
at that time (now it does).

I'd suggest to use ASoC, except that ice1724 is not an ASoC platform
driver, so you'd have to duplicate it.

All the non-ASoC drivers mix codec and machine drivers in the same file.
In the long term, ice1712 and oxygen should be converted to use ASoC,
but that would be a lot of effort if regressions are to be avoided.

I'd suggest to move the common parts of the three ice1712 drivers into
separate files.  You could make the interface of those files similar to
ASoC codec drivers to make later porting easier.


Regards,
Clemens

Re: Triple implementation of WM8766 and quadruple WM8776!

[Pavel Hofman]

Dne 13.3.2012 10:46, Clemens Ladisch napsal(a):
> Ondrej Zary wrote:
>> I'm trying do implement support for Philips PSC724 Ultimate Edge card, which
>> is based on VT1722 + WM8776 + WM8766 chips. Found that the best file to base
>> my work on is sound/pci/ice1712/se.c (as SE-200PCI card contains both WM8776
>> and WM8766 chips).
>>
>> While doing this, found that there are three implementations of WM8766 codec
>> control, two of them in the same driver(!):
>> sound/pci/ice1712/se.c
>> sound/pci/ice1712/prodigy_hifi.c
>> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8766.h)
>>
>> And WM8776 status is even worse, there are four implementations, again two
>> being in the same driver:
>> sound/pci/ice1712/se.c
>> sound/pci/ice1712/maya44.c
>> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8776.h)
>> sound/soc/codecs/wm8776.c (this one being official and stand-alone module but
>> it does not seem to be usable as a part of sound card driver)
> 
.....
> 
> I'd suggest to move the common parts of the three ice1712 drivers into
> separate files.  You could make the interface of those files similar to
> ASoC codec drivers to make later porting easier.

How about a solution similar to AKM codecs in i2c/other? Several ice1724
cards make use of those modules, easy to support and re-use. IMO cleaner
approach than duplicating ICE1724 to the ASoC framework.

Pavel.

Re: Triple implementation of WM8766 and quadruple WM8776!

[Takashi Iwai]

At Tue, 13 Mar 2012 10:53:09 +0100,
Pavel Hofman wrote:
> 
> Dne 13.3.2012 10:46, Clemens Ladisch napsal(a):
> > Ondrej Zary wrote:
> >> I'm trying do implement support for Philips PSC724 Ultimate Edge card, which
> >> is based on VT1722 + WM8776 + WM8766 chips. Found that the best file to base
> >> my work on is sound/pci/ice1712/se.c (as SE-200PCI card contains both WM8776
> >> and WM8766 chips).
> >>
> >> While doing this, found that there are three implementations of WM8766 codec
> >> control, two of them in the same driver(!):
> >> sound/pci/ice1712/se.c
> >> sound/pci/ice1712/prodigy_hifi.c
> >> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8766.h)
> >>
> >> And WM8776 status is even worse, there are four implementations, again two
> >> being in the same driver:
> >> sound/pci/ice1712/se.c
> >> sound/pci/ice1712/maya44.c
> >> sound/pci/oxygen/xonar_wm87x6.c (+sound/pci/oxygen/wm8776.h)
> >> sound/soc/codecs/wm8776.c (this one being official and stand-alone module but
> >> it does not seem to be usable as a part of sound card driver)
> > 
> .....
> > 
> > I'd suggest to move the common parts of the three ice1712 drivers into
> > separate files.  You could make the interface of those files similar to
> > ASoC codec drivers to make later porting easier.
> 
> How about a solution similar to AKM codecs in i2c/other? Several ice1724
> cards make use of those modules, easy to support and re-use. IMO cleaner
> approach than duplicating ICE1724 to the ASoC framework.

ASoC would be rather a "cleaner" approach, but moving the common code
into i2c/other would be a "safer" approach.  It can be done without
shifting the whole infrastructure of ice17xx and oxygen drivers,
indeed.


thanks,

Takashi

Re: Triple implementation of WM8766 and quadruple WM8776!

[Pavel Hofman]

Dne 13.3.2012 10:58, Takashi Iwai napsal(a):
>> .....
>>>
>>> I'd suggest to move the common parts of the three ice1712 drivers into
>>> separate files.  You could make the interface of those files similar to
>>> ASoC codec drivers to make later porting easier.
>>
>> How about a solution similar to AKM codecs in i2c/other? Several ice1724
>> cards make use of those modules, easy to support and re-use. IMO cleaner
>> approach than duplicating ICE1724 to the ASoC framework.
> 
> ASoC would be rather a "cleaner" approach, but moving the common code
> into i2c/other would be a "safer" approach.  It can be done without
> shifting the whole infrastructure of ice17xx and oxygen drivers,
> indeed.

That is very true. I am afraid we do not have all the cards physically
available to test a major overhaul of ice17xx.

Pavel.

Re: Triple implementation of WM8766 and quadruple WM8776!

[Mark Brown]

On Tue, Mar 13, 2012 at 10:53:09AM +0100, Pavel Hofman wrote:

> How about a solution similar to AKM codecs in i2c/other? Several ice1724
> cards make use of those modules, easy to support and re-use. IMO cleaner
> approach than duplicating ICE1724 to the ASoC framework.

Those drivers should also be using ASoC - they're there only because
they predate having a framework for this stuff.  As Clemens said we
shouldn't be duplicating the ICE1724 code, we should be moving it.