From: Huang Shijie <b32955@freescale.com>
To: Dong Aisheng <b29396@freescale.com>
Cc: devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, vinod.koul@linux.intel.com,
s.hauer@pengutronix.de, rob.herring@calxeda.com,
grant.likely@secretlab.ca, rdunlap@xenotime.net,
kernel@pengutronix.de, cjb@laptop.org, shawn.guo@freescale.com
Subject: Re: [PATCH v1 4/5] dma: mxs-dma: add dt probe support
Date: Wed, 14 Mar 2012 15:54:37 +0800 [thread overview]
Message-ID: <4F604EBD.7060400@freescale.com> (raw)
In-Reply-To: <1331628428-24017-5-git-send-email-b29396@freescale.com>
Hi Aisheng:
> From: Dong Aisheng<dong.aisheng@linaro.org>
>
> Signed-off-by: Dong Aisheng<dong.aisheng@linaro.org>
> ---
> .../devicetree/bindings/dma/fsl-mxs-dma.txt | 17 ++++++++
> drivers/dma/mxs-dma.c | 44 +++++++++++++------
> 2 files changed, 47 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> new file mode 100644
> index 0000000..cfa1730
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> @@ -0,0 +1,17 @@
> +* Freescale MXS DMA
> +
> +Required properties:
> +- compatible : Should be "fsl,mxs-dma-apbh" or "fsl,mxs-dma-apbx"
> +- reg : Should contain registers location and length
> +
> +Examples:
> +
> +dma-apbh@80004000 {
> + compatible = "fsl,mxs-dma-apbh";
> + reg =<0x80004000 2000>;
> +};
> +
> +dma-apbx@80024000 {
> + compatible = "fsl,mxs-dma-apbx";
> + reg =<0x80024000 2000>;
> +};
> diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> index b06cd4c..45e8d46 100644
> --- a/drivers/dma/mxs-dma.c
> +++ b/drivers/dma/mxs-dma.c
> @@ -22,6 +22,9 @@
> #include<linux/platform_device.h>
> #include<linux/dmaengine.h>
> #include<linux/delay.h>
> +#include<linux/module.h>
> +#include<linux/of.h>
> +#include<linux/of_device.h>
>
> #include<asm/irq.h>
> #include<mach/mxs.h>
> @@ -130,6 +133,25 @@ struct mxs_dma_engine {
> struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
> };
>
> +static struct platform_device_id mxs_dma_type[] = {
> + {
> + .name = "mxs-dma-apbh",
> + .driver_data = MXS_DMA_APBH,
> + }, {
> + .name = "mxs-dma-apbx",
> + .driver_data = MXS_DMA_APBX,
> + }, {
> + /* end of list */
> + }
> +};
> +
I think you should use the platform_device_id to distinguish different
archs.
In the mx6q, you will meet some compiler error for the macro cpu_is_mx23().
BR
Huang Shijie
> +static const struct of_device_id mxs_dma_dt_ids[] = {
> + { .compatible = "fsl,mxs-dma-apbh", .data =&mxs_dma_type[0], },
> + { .compatible = "fsl,mxs-dma-apbx", .data =&mxs_dma_type[1], },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
> +
> static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
> {
> struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
> @@ -587,8 +609,8 @@ err_out:
>
> static int __init mxs_dma_probe(struct platform_device *pdev)
> {
> - const struct platform_device_id *id_entry =
> - platform_get_device_id(pdev);
> + const struct platform_device_id *id_entry;
> + const struct of_device_id *of_id;
> struct mxs_dma_engine *mxs_dma;
> struct resource *iores;
> int ret, i;
> @@ -597,6 +619,11 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> if (!mxs_dma)
> return -ENOMEM;
>
> + of_id = of_match_device(mxs_dma_dt_ids,&pdev->dev);
> + if (of_id)
> + id_entry = of_id->data;
> + else
> + id_entry = platform_get_device_id(pdev);
> mxs_dma->dev_id = id_entry->driver_data;
>
> iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -679,21 +706,10 @@ err_request_region:
> return ret;
> }
>
> -static struct platform_device_id mxs_dma_type[] = {
> - {
> - .name = "mxs-dma-apbh",
> - .driver_data = MXS_DMA_APBH,
> - }, {
> - .name = "mxs-dma-apbx",
> - .driver_data = MXS_DMA_APBX,
> - }, {
> - /* end of list */
> - }
> -};
> -
> static struct platform_driver mxs_dma_driver = {
> .driver = {
> .name = "mxs-dma",
> + .of_match_table = mxs_dma_dt_ids,
> },
> .id_table = mxs_dma_type,
> };
WARNING: multiple messages have this Message-ID (diff)
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 4/5] dma: mxs-dma: add dt probe support
Date: Wed, 14 Mar 2012 15:54:37 +0800 [thread overview]
Message-ID: <4F604EBD.7060400@freescale.com> (raw)
In-Reply-To: <1331628428-24017-5-git-send-email-b29396@freescale.com>
Hi Aisheng:
> From: Dong Aisheng<dong.aisheng@linaro.org>
>
> Signed-off-by: Dong Aisheng<dong.aisheng@linaro.org>
> ---
> .../devicetree/bindings/dma/fsl-mxs-dma.txt | 17 ++++++++
> drivers/dma/mxs-dma.c | 44 +++++++++++++------
> 2 files changed, 47 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> new file mode 100644
> index 0000000..cfa1730
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> @@ -0,0 +1,17 @@
> +* Freescale MXS DMA
> +
> +Required properties:
> +- compatible : Should be "fsl,mxs-dma-apbh" or "fsl,mxs-dma-apbx"
> +- reg : Should contain registers location and length
> +
> +Examples:
> +
> +dma-apbh at 80004000 {
> + compatible = "fsl,mxs-dma-apbh";
> + reg =<0x80004000 2000>;
> +};
> +
> +dma-apbx at 80024000 {
> + compatible = "fsl,mxs-dma-apbx";
> + reg =<0x80024000 2000>;
> +};
> diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> index b06cd4c..45e8d46 100644
> --- a/drivers/dma/mxs-dma.c
> +++ b/drivers/dma/mxs-dma.c
> @@ -22,6 +22,9 @@
> #include<linux/platform_device.h>
> #include<linux/dmaengine.h>
> #include<linux/delay.h>
> +#include<linux/module.h>
> +#include<linux/of.h>
> +#include<linux/of_device.h>
>
> #include<asm/irq.h>
> #include<mach/mxs.h>
> @@ -130,6 +133,25 @@ struct mxs_dma_engine {
> struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
> };
>
> +static struct platform_device_id mxs_dma_type[] = {
> + {
> + .name = "mxs-dma-apbh",
> + .driver_data = MXS_DMA_APBH,
> + }, {
> + .name = "mxs-dma-apbx",
> + .driver_data = MXS_DMA_APBX,
> + }, {
> + /* end of list */
> + }
> +};
> +
I think you should use the platform_device_id to distinguish different
archs.
In the mx6q, you will meet some compiler error for the macro cpu_is_mx23().
BR
Huang Shijie
> +static const struct of_device_id mxs_dma_dt_ids[] = {
> + { .compatible = "fsl,mxs-dma-apbh", .data =&mxs_dma_type[0], },
> + { .compatible = "fsl,mxs-dma-apbx", .data =&mxs_dma_type[1], },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
> +
> static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
> {
> struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
> @@ -587,8 +609,8 @@ err_out:
>
> static int __init mxs_dma_probe(struct platform_device *pdev)
> {
> - const struct platform_device_id *id_entry =
> - platform_get_device_id(pdev);
> + const struct platform_device_id *id_entry;
> + const struct of_device_id *of_id;
> struct mxs_dma_engine *mxs_dma;
> struct resource *iores;
> int ret, i;
> @@ -597,6 +619,11 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> if (!mxs_dma)
> return -ENOMEM;
>
> + of_id = of_match_device(mxs_dma_dt_ids,&pdev->dev);
> + if (of_id)
> + id_entry = of_id->data;
> + else
> + id_entry = platform_get_device_id(pdev);
> mxs_dma->dev_id = id_entry->driver_data;
>
> iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -679,21 +706,10 @@ err_request_region:
> return ret;
> }
>
> -static struct platform_device_id mxs_dma_type[] = {
> - {
> - .name = "mxs-dma-apbh",
> - .driver_data = MXS_DMA_APBH,
> - }, {
> - .name = "mxs-dma-apbx",
> - .driver_data = MXS_DMA_APBX,
> - }, {
> - /* end of list */
> - }
> -};
> -
> static struct platform_driver mxs_dma_driver = {
> .driver = {
> .name = "mxs-dma",
> + .of_match_table = mxs_dma_dt_ids,
> },
> .id_table = mxs_dma_type,
> };
WARNING: multiple messages have this Message-ID (diff)
From: Huang Shijie <b32955@freescale.com>
To: Dong Aisheng <b29396@freescale.com>
Cc: <devicetree-discuss@lists.ozlabs.org>,
<linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<vinod.koul@linux.intel.com>, <s.hauer@pengutronix.de>,
<rob.herring@calxeda.com>, <grant.likely@secretlab.ca>,
<rdunlap@xenotime.net>, <kernel@pengutronix.de>, <cjb@laptop.org>,
<shawn.guo@freescale.com>
Subject: Re: [PATCH v1 4/5] dma: mxs-dma: add dt probe support
Date: Wed, 14 Mar 2012 15:54:37 +0800 [thread overview]
Message-ID: <4F604EBD.7060400@freescale.com> (raw)
In-Reply-To: <1331628428-24017-5-git-send-email-b29396@freescale.com>
Hi Aisheng:
> From: Dong Aisheng<dong.aisheng@linaro.org>
>
> Signed-off-by: Dong Aisheng<dong.aisheng@linaro.org>
> ---
> .../devicetree/bindings/dma/fsl-mxs-dma.txt | 17 ++++++++
> drivers/dma/mxs-dma.c | 44 +++++++++++++------
> 2 files changed, 47 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> new file mode 100644
> index 0000000..cfa1730
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> @@ -0,0 +1,17 @@
> +* Freescale MXS DMA
> +
> +Required properties:
> +- compatible : Should be "fsl,mxs-dma-apbh" or "fsl,mxs-dma-apbx"
> +- reg : Should contain registers location and length
> +
> +Examples:
> +
> +dma-apbh@80004000 {
> + compatible = "fsl,mxs-dma-apbh";
> + reg =<0x80004000 2000>;
> +};
> +
> +dma-apbx@80024000 {
> + compatible = "fsl,mxs-dma-apbx";
> + reg =<0x80024000 2000>;
> +};
> diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> index b06cd4c..45e8d46 100644
> --- a/drivers/dma/mxs-dma.c
> +++ b/drivers/dma/mxs-dma.c
> @@ -22,6 +22,9 @@
> #include<linux/platform_device.h>
> #include<linux/dmaengine.h>
> #include<linux/delay.h>
> +#include<linux/module.h>
> +#include<linux/of.h>
> +#include<linux/of_device.h>
>
> #include<asm/irq.h>
> #include<mach/mxs.h>
> @@ -130,6 +133,25 @@ struct mxs_dma_engine {
> struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
> };
>
> +static struct platform_device_id mxs_dma_type[] = {
> + {
> + .name = "mxs-dma-apbh",
> + .driver_data = MXS_DMA_APBH,
> + }, {
> + .name = "mxs-dma-apbx",
> + .driver_data = MXS_DMA_APBX,
> + }, {
> + /* end of list */
> + }
> +};
> +
I think you should use the platform_device_id to distinguish different
archs.
In the mx6q, you will meet some compiler error for the macro cpu_is_mx23().
BR
Huang Shijie
> +static const struct of_device_id mxs_dma_dt_ids[] = {
> + { .compatible = "fsl,mxs-dma-apbh", .data =&mxs_dma_type[0], },
> + { .compatible = "fsl,mxs-dma-apbx", .data =&mxs_dma_type[1], },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
> +
> static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
> {
> struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
> @@ -587,8 +609,8 @@ err_out:
>
> static int __init mxs_dma_probe(struct platform_device *pdev)
> {
> - const struct platform_device_id *id_entry =
> - platform_get_device_id(pdev);
> + const struct platform_device_id *id_entry;
> + const struct of_device_id *of_id;
> struct mxs_dma_engine *mxs_dma;
> struct resource *iores;
> int ret, i;
> @@ -597,6 +619,11 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> if (!mxs_dma)
> return -ENOMEM;
>
> + of_id = of_match_device(mxs_dma_dt_ids,&pdev->dev);
> + if (of_id)
> + id_entry = of_id->data;
> + else
> + id_entry = platform_get_device_id(pdev);
> mxs_dma->dev_id = id_entry->driver_data;
>
> iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -679,21 +706,10 @@ err_request_region:
> return ret;
> }
>
> -static struct platform_device_id mxs_dma_type[] = {
> - {
> - .name = "mxs-dma-apbh",
> - .driver_data = MXS_DMA_APBH,
> - }, {
> - .name = "mxs-dma-apbx",
> - .driver_data = MXS_DMA_APBX,
> - }, {
> - /* end of list */
> - }
> -};
> -
> static struct platform_driver mxs_dma_driver = {
> .driver = {
> .name = "mxs-dma",
> + .of_match_table = mxs_dma_dt_ids,
> },
> .id_table = mxs_dma_type,
> };
next prev parent reply other threads:[~2012-03-14 7:51 UTC|newest]
Thread overview: 150+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-13 8:47 [PATCH v1 0/5] dt: add basic imx28 support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` [PATCH v1 1/5] ARM: imx28: add basic dt support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 14:35 ` Rob Herring
2012-03-13 14:35 ` Rob Herring
2012-03-13 14:59 ` Zach Sadecki
2012-03-13 14:59 ` Zach Sadecki
2012-03-13 14:59 ` Zach Sadecki
2012-03-13 17:28 ` Grant Likely
2012-03-13 17:28 ` Grant Likely
2012-03-14 5:38 ` Shawn Guo
2012-03-14 5:38 ` Shawn Guo
2012-03-14 6:23 ` Dong Aisheng
2012-03-14 6:23 ` Dong Aisheng
2012-03-14 6:23 ` Dong Aisheng
2012-03-14 6:51 ` Marek Vasut
2012-03-14 6:51 ` Marek Vasut
2012-03-14 13:05 ` Rob Herring
2012-03-14 13:05 ` Rob Herring
2012-03-15 2:57 ` Dong Aisheng
2012-03-15 2:57 ` Dong Aisheng
2012-03-13 17:23 ` Grant Likely
2012-03-13 17:23 ` Grant Likely
2012-03-14 5:41 ` Shawn Guo
2012-03-14 5:41 ` Shawn Guo
2012-03-14 5:56 ` Marek Vasut
2012-03-14 5:56 ` Marek Vasut
2012-03-14 6:30 ` Dong Aisheng
2012-03-14 6:30 ` Dong Aisheng
2012-03-14 6:30 ` Dong Aisheng
2012-03-14 12:45 ` Dong Aisheng
2012-03-14 12:45 ` Dong Aisheng
2012-03-14 14:16 ` s.hauer
2012-03-14 14:16 ` s.hauer at pengutronix.de
2012-03-15 3:02 ` Dong Aisheng
2012-03-15 3:02 ` Dong Aisheng
2012-03-15 6:53 ` Lothar Waßmann
2012-03-15 6:53 ` Lothar Waßmann
2012-03-15 6:53 ` Lothar Waßmann
2012-03-15 10:59 ` Dong Aisheng
2012-03-15 10:59 ` Dong Aisheng
[not found] ` <20120315105927.GE13022-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-03-15 11:22 ` Lothar Waßmann
2012-03-15 11:22 ` Lothar Waßmann
2012-03-15 11:22 ` Lothar Waßmann
2012-03-16 3:01 ` Dong Aisheng
2012-03-16 3:01 ` Dong Aisheng
2012-03-16 7:48 ` Lothar Waßmann
2012-03-16 7:48 ` Lothar Waßmann
2012-03-16 7:48 ` Lothar Waßmann
2012-03-16 8:22 ` Dong Aisheng
2012-03-16 8:22 ` Dong Aisheng
[not found] ` <20120316030134.GA5161-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-03-18 18:47 ` Grant Likely
2012-03-18 18:47 ` Grant Likely
2012-03-19 6:54 ` Lothar Waßmann
2012-03-19 6:54 ` Lothar Waßmann
2012-03-19 6:54 ` Lothar Waßmann
[not found] ` <20326.55337.249575.289067-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>
2012-03-19 15:06 ` Grant Likely
2012-03-19 15:06 ` Grant Likely
2012-03-19 16:49 ` Lothar Waßmann
2012-03-19 16:49 ` Lothar Waßmann
2012-03-19 16:49 ` Lothar Waßmann
[not found] ` <20327.25470.723875.916422-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org>
2012-03-19 22:02 ` Grant Likely
2012-03-19 22:02 ` Grant Likely
2012-03-20 12:49 ` Dong Aisheng
2012-03-20 12:49 ` Dong Aisheng
2012-03-20 13:17 ` Lothar Waßmann
2012-03-20 13:17 ` Lothar Waßmann
2012-03-20 13:17 ` Lothar Waßmann
2012-03-21 11:06 ` Dong Aisheng
2012-03-21 11:06 ` Dong Aisheng
2012-03-16 8:49 ` Shawn Guo
2012-03-16 8:49 ` Shawn Guo
2012-03-15 11:24 ` s.hauer
2012-03-15 11:24 ` s.hauer at pengutronix.de
2012-03-16 3:05 ` Dong Aisheng
2012-03-16 3:05 ` Dong Aisheng
2012-03-14 19:41 ` Sascha Hauer
2012-03-14 19:41 ` Sascha Hauer
2012-03-15 3:05 ` Dong Aisheng
2012-03-15 3:05 ` Dong Aisheng
2012-03-13 8:47 ` [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 17:42 ` Grant Likely
2012-03-13 17:42 ` Grant Likely
2012-03-14 6:42 ` Dong Aisheng
2012-03-14 6:42 ` Dong Aisheng
2012-03-14 5:58 ` Marek Vasut
2012-03-14 5:58 ` Marek Vasut
2012-03-14 6:55 ` Dong Aisheng
2012-03-14 6:55 ` Dong Aisheng
2012-03-14 7:09 ` Marek Vasut
2012-03-14 7:09 ` Marek Vasut
2012-03-14 7:13 ` s.hauer
2012-03-14 7:13 ` s.hauer at pengutronix.de
2012-03-14 7:26 ` Dong Aisheng
2012-03-14 7:26 ` Dong Aisheng
2012-03-14 11:17 ` Marek Vasut
2012-03-14 11:17 ` Marek Vasut
2012-03-14 11:17 ` Marek Vasut
2012-03-14 7:23 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 7:23 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 8:09 ` Dong Aisheng
2012-03-14 8:09 ` Dong Aisheng
[not found] ` <20120314080939.GA1180-Fb7DQEYuewWctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2012-03-14 8:52 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 8:52 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 8:52 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 8:47 ` [PATCH v1 3/5] ARM: imx28evk: add mmc dt support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 14:39 ` Rob Herring
2012-03-13 14:39 ` Rob Herring
2012-03-13 16:52 ` Sascha Hauer
2012-03-13 16:52 ` Sascha Hauer
2012-03-13 17:45 ` Rob Herring
2012-03-13 17:45 ` Rob Herring
2012-03-14 7:30 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 7:30 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 8:20 ` Dong Aisheng
2012-03-14 8:20 ` Dong Aisheng
2012-03-14 8:54 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 8:54 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 7:28 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-14 7:28 ` Jean-Christophe PLAGNIOL-VILLARD
2012-03-13 8:47 ` [PATCH v1 4/5] dma: mxs-dma: add dt probe support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-14 7:54 ` Huang Shijie [this message]
2012-03-14 7:54 ` Huang Shijie
2012-03-14 7:54 ` Huang Shijie
2012-03-14 8:23 ` Dong Aisheng
2012-03-14 8:23 ` Dong Aisheng
2012-03-13 8:47 ` [PATCH v1 5/5] ARM: mxs: add mxs dma dt support Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-13 8:47 ` Dong Aisheng
2012-03-14 7:58 ` Huang Shijie
2012-03-14 7:58 ` Huang Shijie
2012-03-14 7:58 ` Huang Shijie
2012-03-14 8:30 ` Dong Aisheng
2012-03-14 8:30 ` Dong Aisheng
2012-03-14 8:43 ` Huang Shijie
2012-03-14 8:43 ` Huang Shijie
2012-03-14 6:01 ` [PATCH v1 0/5] dt: add basic imx28 support Marek Vasut
2012-03-14 6:01 ` Marek Vasut
2012-03-14 7:34 ` Dong Aisheng
2012-03-14 7:34 ` Dong Aisheng
2012-03-14 7:34 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F604EBD.7060400@freescale.com \
--to=b32955@freescale.com \
--cc=b29396@freescale.com \
--cc=cjb@laptop.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=rdunlap@xenotime.net \
--cc=rob.herring@calxeda.com \
--cc=s.hauer@pengutronix.de \
--cc=shawn.guo@freescale.com \
--cc=vinod.koul@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.