All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cousson, Benoit" <b-cousson@ti.com>
To: tony Lindgren <tony@atomide.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"Nayak, Rajendra" <rnayak@ti.com>
Subject: Re: [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates
Date: Wed, 14 Mar 2012 23:50:13 +0100	[thread overview]
Message-ID: <4F6120A5.6050407@ti.com> (raw)
In-Reply-To: <4F5E89B4.4010505@ti.com>

Hi Tony,

It looks like Chris Ball just queued  the HSMMC DT stuff from Rajendra, 
so I can add as well the MMC DTS for OMAP3 and OMAP4 as well.

It is fine for an update?

Than I can add as Kevin's patch for twl irq_base removal.

Thanks,
Benoit

On 3/13/2012 12:41 AM, Cousson, Benoit wrote:
> Hi Tony,
>
> Here are the remaining DTS patches for 3.4.
>
> Ideally all the driver DT adaptation should have been merged before that one.
>
> This series is based on your lo/dt-part2 branch.
>
> Thanks,
> Benoit
>
>
> The following changes since commit 328ae2cb50af2f96b6061eb462aa92966a462bbc:
>    Ilya Yanok (1):
>          arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
>
> are available in the git repository at:
>
>    git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.4/dts/all
>
> Benoit Cousson (11):
>        arm/dts: twl6030: Add DTS file for twl6030 PMIC
>        arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
>        arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
>        arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
>        arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
>        ARM: OMAP2+: board-generic: Remove i2c static init
>        arm/dts: OMAP4: Add gpio nodes
>        arm/dts: OMAP3: Add gpio nodes
>        arm/dts: OMAP4: Add SPI controller nodes
>        arm/dts: OMAP3: Add SPI controller nodes
>        arm/dts: omap4-sdp: Add ks8851 ethernet SPI device
>
> Rajendra Nayak (1):
>        arm/dts: twl: Pass regulator data from dt
>
>   arch/arm/boot/dts/omap3-beagle.dts  |   35 ++++++++++++++
>   arch/arm/boot/dts/omap3.dtsi        |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/omap4-panda.dts   |   34 ++++++++++++++
>   arch/arm/boot/dts/omap4-sdp.dts     |   73 +++++++++++++++++++++++++++++
>   arch/arm/boot/dts/omap4.dtsi        |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/twl4030.dtsi      |   39 ++++++++++++++++
>   arch/arm/boot/dts/twl6030.dtsi      |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/mach-omap2/board-generic.c |   37 +--------------
>   arch/arm/mach-omap2/devices.c       |    4 +-
>   arch/arm/mach-omap2/gpio.c          |    8 +++-
>   10 files changed, 450 insertions(+), 38 deletions(-)
>   create mode 100644 arch/arm/boot/dts/twl4030.dtsi
>   create mode 100644 arch/arm/boot/dts/twl6030.dtsi
>


WARNING: multiple messages have this Message-ID (diff)
From: b-cousson@ti.com (Cousson, Benoit)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates
Date: Wed, 14 Mar 2012 23:50:13 +0100	[thread overview]
Message-ID: <4F6120A5.6050407@ti.com> (raw)
In-Reply-To: <4F5E89B4.4010505@ti.com>

Hi Tony,

It looks like Chris Ball just queued  the HSMMC DT stuff from Rajendra, 
so I can add as well the MMC DTS for OMAP3 and OMAP4 as well.

It is fine for an update?

Than I can add as Kevin's patch for twl irq_base removal.

Thanks,
Benoit

On 3/13/2012 12:41 AM, Cousson, Benoit wrote:
> Hi Tony,
>
> Here are the remaining DTS patches for 3.4.
>
> Ideally all the driver DT adaptation should have been merged before that one.
>
> This series is based on your lo/dt-part2 branch.
>
> Thanks,
> Benoit
>
>
> The following changes since commit 328ae2cb50af2f96b6061eb462aa92966a462bbc:
>    Ilya Yanok (1):
>          arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
>
> are available in the git repository at:
>
>    git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.4/dts/all
>
> Benoit Cousson (11):
>        arm/dts: twl6030: Add DTS file for twl6030 PMIC
>        arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
>        arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
>        arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
>        arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
>        ARM: OMAP2+: board-generic: Remove i2c static init
>        arm/dts: OMAP4: Add gpio nodes
>        arm/dts: OMAP3: Add gpio nodes
>        arm/dts: OMAP4: Add SPI controller nodes
>        arm/dts: OMAP3: Add SPI controller nodes
>        arm/dts: omap4-sdp: Add ks8851 ethernet SPI device
>
> Rajendra Nayak (1):
>        arm/dts: twl: Pass regulator data from dt
>
>   arch/arm/boot/dts/omap3-beagle.dts  |   35 ++++++++++++++
>   arch/arm/boot/dts/omap3.dtsi        |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/omap4-panda.dts   |   34 ++++++++++++++
>   arch/arm/boot/dts/omap4-sdp.dts     |   73 +++++++++++++++++++++++++++++
>   arch/arm/boot/dts/omap4.dtsi        |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/twl4030.dtsi      |   39 ++++++++++++++++
>   arch/arm/boot/dts/twl6030.dtsi      |   86 +++++++++++++++++++++++++++++++++++
>   arch/arm/mach-omap2/board-generic.c |   37 +--------------
>   arch/arm/mach-omap2/devices.c       |    4 +-
>   arch/arm/mach-omap2/gpio.c          |    8 +++-
>   10 files changed, 450 insertions(+), 38 deletions(-)
>   create mode 100644 arch/arm/boot/dts/twl4030.dtsi
>   create mode 100644 arch/arm/boot/dts/twl6030.dtsi
>

  reply	other threads:[~2012-03-14 22:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-12 23:41 [GIT PULL] ARM: OMAP: i2c, gpio, spi and regulator DTS updates Cousson, Benoit
2012-03-12 23:41 ` Cousson, Benoit
2012-03-14 22:50 ` Cousson, Benoit [this message]
2012-03-14 22:50   ` Cousson, Benoit
2012-03-14 22:57   ` Tony Lindgren
2012-03-14 22:57     ` Tony Lindgren
2012-03-14 23:04     ` Cousson, Benoit
2012-03-14 23:04       ` Cousson, Benoit
2012-03-14 23:21       ` Tony Lindgren
2012-03-14 23:21         ` Tony Lindgren
2012-03-14 23:38         ` Cousson, Benoit
2012-03-14 23:38           ` Cousson, Benoit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F6120A5.6050407@ti.com \
    --to=b-cousson@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rnayak@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.