[PATCHv5 00/18] I2C updates

[PATCHv5 00/18] I2C updates

[Shubhrajyoti D]

The patch series does the following

- Warn fixes if CONFIG_PM_RUNTIME is not selected.
- I2C register restore only if context if the context is lost
- Bus busy recovery mechanism.
- the reset is not done in init.

v2 changes
-Adds a patch to use devm_* functions
-Also checks the return type of the get_sync and in case
 of errors prevents register access.
- In case of i2c remove register access was done without any
 get_sync fix the same.
- Adds a pdata function pointer to do context save restore

v3 changes
- Split the omap_i2c_isr to increase readability
- Adds the restore flag patch for OMAP4 to the series
- Make the i2c use SET_RUNTIME_PM_OPS
v4 changes
- Folds a patch from Tasslehoff to prevent any merge conflicts.
- Prevents the XDUF flag to be set if the underflow condition is not met.

v5 changes
- Add consistency in the subject naming. 

Tested on omap4sdp and omap3sdp.

The following changes since commit dd775ae2549217d3ae09363e3edb305d0fa19928:

  Linux 3.4-rc1 (2012-03-31 16:24:09 -0700)

are available in the git repository at:
  git-OGgr7I4mDcYgsBAKwltoeQ@public.gmane.org:linus-tree/linus-tree.git i2c-v5

Jon Hunter (1):
      I2C: OMAP: Correct I2C revision for OMAP3

Shubhrajyoti D (15):
      I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME
      I2C: OMAP: Remove reset at init
      I2C: OMAP: I2C register restore only if context is lost
      I2C: OMAP: Fix the interrupt clearing in OMAP4
      I2C: OMAP: Fix the mismatch of pm_runtime enable and disable
      I2C: OMAP: Optimise the remove code
      I2C: OMAP: Fix the error handling
      I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero
      I2C: OMAP: use devm_* functions
      I2C: OMAP: Fix the crash in i2c remove
      I2C: OMAP: Handle error check for pm runtime
      I2C: OMAP: Use SET_RUNTIME_PM_OPS
      I2C: OMAP: make the read ready processing a separate function
      I2C: OMAP: Do not set the XUDF if the underflow is not reached
      ARM: OMAP4: hwmod data: I2C: add flag for context restore

Tasslehoff Kjappfot (1):
      I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

Vikram Pandita (1):
      I2C: OMAP: Recover from Bus Busy condition

 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    3 +-
 arch/arm/plat-omap/i2c.c                   |    3 +
 drivers/i2c/busses/i2c-omap.c              |  330 +++++++++++++++-------------
 include/linux/i2c-omap.h                   |    1 +
 4 files changed, 188 insertions(+), 149 deletions(-)

[PATCHv5 00/18] I2C updates

[Shubhrajyoti D]

The patch series does the following

- Warn fixes if CONFIG_PM_RUNTIME is not selected.
- I2C register restore only if context if the context is lost
- Bus busy recovery mechanism.
- the reset is not done in init.

v2 changes
-Adds a patch to use devm_* functions
-Also checks the return type of the get_sync and in case
 of errors prevents register access.
- In case of i2c remove register access was done without any
 get_sync fix the same.
- Adds a pdata function pointer to do context save restore

v3 changes
- Split the omap_i2c_isr to increase readability
- Adds the restore flag patch for OMAP4 to the series
- Make the i2c use SET_RUNTIME_PM_OPS
v4 changes
- Folds a patch from Tasslehoff to prevent any merge conflicts.
- Prevents the XDUF flag to be set if the underflow condition is not met.

v5 changes
- Add consistency in the subject naming. 

Tested on omap4sdp and omap3sdp.

The following changes since commit dd775ae2549217d3ae09363e3edb305d0fa19928:

  Linux 3.4-rc1 (2012-03-31 16:24:09 -0700)

are available in the git repository at:
  git at gitorious.org:linus-tree/linus-tree.git i2c-v5

Jon Hunter (1):
      I2C: OMAP: Correct I2C revision for OMAP3

Shubhrajyoti D (15):
      I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME
      I2C: OMAP: Remove reset at init
      I2C: OMAP: I2C register restore only if context is lost
      I2C: OMAP: Fix the interrupt clearing in OMAP4
      I2C: OMAP: Fix the mismatch of pm_runtime enable and disable
      I2C: OMAP: Optimise the remove code
      I2C: OMAP: Fix the error handling
      I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero
      I2C: OMAP: use devm_* functions
      I2C: OMAP: Fix the crash in i2c remove
      I2C: OMAP: Handle error check for pm runtime
      I2C: OMAP: Use SET_RUNTIME_PM_OPS
      I2C: OMAP: make the read ready processing a separate function
      I2C: OMAP: Do not set the XUDF if the underflow is not reached
      ARM: OMAP4: hwmod data: I2C: add flag for context restore

Tasslehoff Kjappfot (1):
      I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

Vikram Pandita (1):
      I2C: OMAP: Recover from Bus Busy condition

 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    3 +-
 arch/arm/plat-omap/i2c.c                   |    3 +
 drivers/i2c/busses/i2c-omap.c              |  330 +++++++++++++++-------------
 include/linux/i2c-omap.h                   |    1 +
 4 files changed, 188 insertions(+), 149 deletions(-)

[PATCHv5 02/18] I2C: OMAP: Remove reset at init

[Shubhrajyoti D]

The reset in the driver at init is not needed anymore as the
following patch has removed the HWMOD_INIT_NO_RESET flag.
6d3c55f [OMAP: hwmod: fix the i2c-reset timeout during bootup]

This patch does the following
-removes the reset from the probe and implements a omap_i2c_reset
 function to reset.
- Reset is removed from omap_i2c_init, which was called
 not only during probe, but also after time out and error handling.
 omap_i2c_reset is added in those places to effect the reset.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   20 +++++++++++++-------
 1 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 4f4188d..e402ebb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -269,15 +269,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
 {
-	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
-	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
-	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
-	unsigned long internal_clk = 0;
-	struct clk *fclk;
-
 	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
 		/* Disable I2C controller before soft reset */
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -325,6 +319,16 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 							dev->westate);
 		}
 	}
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+	struct clk *fclk;
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
 	if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
@@ -548,6 +552,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 		return r;
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -ETIMEDOUT;
 	}
@@ -558,6 +563,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	/* We have an error */
 	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 			    OMAP_I2C_STAT_XUDF)) {
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -EIO;
 	}
-- 
1.7.1

[PATCHv5 02/18] I2C: OMAP: Remove reset at init

[Shubhrajyoti D]

The reset in the driver at init is not needed anymore as the
following patch has removed the HWMOD_INIT_NO_RESET flag.
6d3c55f [OMAP: hwmod: fix the i2c-reset timeout during bootup]

This patch does the following
-removes the reset from the probe and implements a omap_i2c_reset
 function to reset.
- Reset is removed from omap_i2c_init, which was called
 not only during probe, but also after time out and error handling.
 omap_i2c_reset is added in those places to effect the reset.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   20 +++++++++++++-------
 1 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 4f4188d..e402ebb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -269,15 +269,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
 {
-	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
-	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
-	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
-	unsigned long internal_clk = 0;
-	struct clk *fclk;
-
 	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
 		/* Disable I2C controller before soft reset */
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -325,6 +319,16 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 							dev->westate);
 		}
 	}
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+	struct clk *fclk;
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 
 	if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
@@ -548,6 +552,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 		return r;
 	if (r == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -ETIMEDOUT;
 	}
@@ -558,6 +563,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	/* We have an error */
 	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 			    OMAP_I2C_STAT_XUDF)) {
+		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
 		return -EIO;
 	}
-- 
1.7.1

[PATCHv5 03/18] I2C: OMAP: Recover from Bus Busy condition

[Shubhrajyoti D]

From: Vikram Pandita <vikram.pandita@ti.com>

In case a peripheral is driving SDA bus low (ie. a start condition), provide
a constant clock output using the test mode of the OMAP I2C controller to
try and clear the bus. Soft reset I2C controller after attempting the bus clear
to ensure that controller is in a good state.

Based upon Vikram Pandita's patch from TI Android 3.0.
I acknowledge the contributions and suggestions of Jon and Hemant.

A couple differences from the original patch ...
1. Add a new function for bus clear
2. Ensure that the CON.I2C_EN bit is set when using the SYSTEST feature to
   output a permanent clock. This bit needs to be set and typically it would
   be set by the unidle function but this is not the case for all OMAP
   generations.
3. Program the SYSTEST setting only the bits we care about. However, restore
   SYSTEST registers to there original state as some OMAP generations do not
   implement perform a soft-reset.
4. Clear the CON register after performing the bus clear, so when we call the
   init function the controller is disabled and the init function will
   re-enable later.

Original patch can be found here:
http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=a2ab04192ba25e60f95ba1ff3af5601a2d7b5bd1

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   33 ++++++++++++++++++++++++++++++---
 1 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e402ebb..a882558 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -147,16 +147,15 @@ enum {
 #define OMAP_I2C_SCLH_HSSCLH	8
 
 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
-#ifdef DEBUG
 #define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
 #define OMAP_I2C_SYSTEST_FREE		(1 << 14)	/* Free running mode */
 #define OMAP_I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
-#define OMAP_I2C_SYSTEST_TMODE_SHIFT	(12)		/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_TEST	(2 << 12)	/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_LOOP	(3 << 12)	/* Test mode select */
 #define OMAP_I2C_SYSTEST_SCL_I		(1 << 3)	/* SCL line sense in */
 #define OMAP_I2C_SYSTEST_SCL_O		(1 << 2)	/* SCL line drive out */
 #define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
-#endif
 
 /* OCP_SYSSTATUS bit definitions */
 #define SYSS_RESETDONE_MASK		(1 << 0)
@@ -319,6 +318,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev)
 							dev->westate);
 		}
 	}
+	return 0;
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -471,6 +471,31 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 }
 
 /*
+ * Bus Clear
+ */
+static int omap_i2c_bus_clear(struct omap_i2c_dev *dev)
+{
+	u16 w;
+
+	/*
+	 * Per the I2C specification, if we are stuck in a bus busy state
+	 * we can attempt a bus clear to try and recover the bus by sending
+	 * at least 9 clock pulses on SCL. Put the I2C in a test mode so it
+	 * will output a continuous clock on SCL.
+	 */
+	w = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, (OMAP_I2C_SYSTEST_ST_EN
+			   | OMAP_I2C_SYSTEST_TMODE_TEST));
+	msleep(1);
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, w);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	omap_i2c_reset(dev);
+	omap_i2c_init(dev);
+	return omap_i2c_wait_for_bb(dev);
+}
+
+/*
  * Low level master read/write transaction.
  */
 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
@@ -597,6 +622,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	r = omap_i2c_wait_for_bb(dev);
 	if (r < 0)
+		r = omap_i2c_bus_clear(dev);
+	if (r < 0)
 		goto out;
 
 	if (dev->set_mpu_wkup_lat != NULL)
-- 
1.7.1

[PATCHv5 03/18] I2C: OMAP: Recover from Bus Busy condition

[Shubhrajyoti D]

From: Vikram Pandita <vikram.pandita@ti.com>

In case a peripheral is driving SDA bus low (ie. a start condition), provide
a constant clock output using the test mode of the OMAP I2C controller to
try and clear the bus. Soft reset I2C controller after attempting the bus clear
to ensure that controller is in a good state.

Based upon Vikram Pandita's patch from TI Android 3.0.
I acknowledge the contributions and suggestions of Jon and Hemant.

A couple differences from the original patch ...
1. Add a new function for bus clear
2. Ensure that the CON.I2C_EN bit is set when using the SYSTEST feature to
   output a permanent clock. This bit needs to be set and typically it would
   be set by the unidle function but this is not the case for all OMAP
   generations.
3. Program the SYSTEST setting only the bits we care about. However, restore
   SYSTEST registers to there original state as some OMAP generations do not
   implement perform a soft-reset.
4. Clear the CON register after performing the bus clear, so when we call the
   init function the controller is disabled and the init function will
   re-enable later.

Original patch can be found here:
http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=a2ab04192ba25e60f95ba1ff3af5601a2d7b5bd1

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   33 ++++++++++++++++++++++++++++++---
 1 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e402ebb..a882558 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -147,16 +147,15 @@ enum {
 #define OMAP_I2C_SCLH_HSSCLH	8
 
 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
-#ifdef DEBUG
 #define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
 #define OMAP_I2C_SYSTEST_FREE		(1 << 14)	/* Free running mode */
 #define OMAP_I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
-#define OMAP_I2C_SYSTEST_TMODE_SHIFT	(12)		/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_TEST	(2 << 12)	/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_LOOP	(3 << 12)	/* Test mode select */
 #define OMAP_I2C_SYSTEST_SCL_I		(1 << 3)	/* SCL line sense in */
 #define OMAP_I2C_SYSTEST_SCL_O		(1 << 2)	/* SCL line drive out */
 #define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
-#endif
 
 /* OCP_SYSSTATUS bit definitions */
 #define SYSS_RESETDONE_MASK		(1 << 0)
@@ -319,6 +318,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev)
 							dev->westate);
 		}
 	}
+	return 0;
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -471,6 +471,31 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 }
 
 /*
+ * Bus Clear
+ */
+static int omap_i2c_bus_clear(struct omap_i2c_dev *dev)
+{
+	u16 w;
+
+	/*
+	 * Per the I2C specification, if we are stuck in a bus busy state
+	 * we can attempt a bus clear to try and recover the bus by sending
+	 * at least 9 clock pulses on SCL. Put the I2C in a test mode so it
+	 * will output a continuous clock on SCL.
+	 */
+	w = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, (OMAP_I2C_SYSTEST_ST_EN
+			   | OMAP_I2C_SYSTEST_TMODE_TEST));
+	msleep(1);
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, w);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	omap_i2c_reset(dev);
+	omap_i2c_init(dev);
+	return omap_i2c_wait_for_bb(dev);
+}
+
+/*
  * Low level master read/write transaction.
  */
 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
@@ -597,6 +622,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	r = omap_i2c_wait_for_bb(dev);
 	if (r < 0)
+		r = omap_i2c_bus_clear(dev);
+	if (r < 0)
 		goto out;
 
 	if (dev->set_mpu_wkup_lat != NULL)
-- 
1.7.1

[PATCHv5 06/18] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable

[Shubhrajyoti D]

Currently the i2c driver calls the pm_runtime_enable and never
the disable. This may cause a warning when pm_runtime_enable
checks for the count match.Attempting to fix the same by calling
pm_runtime_disable in the error and the remove path.

Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2769f67..3670088 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1124,6 +1124,7 @@ err_unuse_clocks:
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(dev->dev);
 	iounmap(dev->base);
+	pm_runtime_disable(&pdev->dev);
 err_free_mem:
 	platform_set_drvdata(pdev, NULL);
 	kfree(dev);
@@ -1144,6 +1145,7 @@ omap_i2c_remove(struct platform_device *pdev)
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	pm_runtime_disable(&pdev->dev);
 	iounmap(dev->base);
 	kfree(dev);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- 
1.7.1

[PATCHv5 06/18] I2C: OMAP: Fix the mismatch of pm_runtime enable and disable

[Shubhrajyoti D]

Currently the i2c driver calls the pm_runtime_enable and never
the disable. This may cause a warning when pm_runtime_enable
checks for the count match.Attempting to fix the same by calling
pm_runtime_disable in the error and the remove path.

Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2769f67..3670088 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1124,6 +1124,7 @@ err_unuse_clocks:
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(dev->dev);
 	iounmap(dev->base);
+	pm_runtime_disable(&pdev->dev);
 err_free_mem:
 	platform_set_drvdata(pdev, NULL);
 	kfree(dev);
@@ -1144,6 +1145,7 @@ omap_i2c_remove(struct platform_device *pdev)
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	pm_runtime_disable(&pdev->dev);
 	iounmap(dev->base);
 	kfree(dev);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- 
1.7.1

[PATCHv5 01/18] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME

[Shubhrajyoti D]

The functions omap_i2c_unidle/idle are called from omap_i2c_runtime_resume
and omap_i2c_runtime_suspend which is compiled for CONFIG_PM_RUNTIME.
This patch removes the omap_i2c_unidle/idle functions and folds them
into the runtime callbacks.

This fixes the below warn when CONFIG_PM_RUNTIME is not defined

 CC      arch/arm/mach-omap2/board-ti8168evm.o
drivers/i2c/busses/i2c-omap.c:272: warning: 'omap_i2c_unidle' defined but not used
drivers/i2c/busses/i2c-omap.c:293: warning: 'omap_i2c_idle' defined but not used
  CC      net/ipv4/ip_forward.o

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   75 +++++++++++++++++-----------------------
 1 files changed, 32 insertions(+), 43 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 801df60..4f4188d 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -269,47 +269,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static void omap_i2c_unidle(struct omap_i2c_dev *dev)
-{
-	if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
-	}
-
-	/*
-	 * Don't write to this register if the IE state is 0 as it can
-	 * cause deadlock.
-	 */
-	if (dev->iestate)
-		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
-}
-
-static void omap_i2c_idle(struct omap_i2c_dev *dev)
-{
-	u16 iv;
-
-	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
-	if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
-		omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
-	else
-		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
-
-	if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
-		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
-	} else {
-		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
-
-		/* Flush posted write */
-		omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
-	}
-}
-
 static int omap_i2c_init(struct omap_i2c_dev *dev)
 {
 	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
@@ -1163,8 +1122,22 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+	u16 iv;
+
+	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
+	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
+	else
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
+		iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
+	} else {
+		omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate);
 
-	omap_i2c_idle(_dev);
+		/* Flush posted write */
+		omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG);
+	}
 
 	return 0;
 }
@@ -1174,7 +1147,23 @@ static int omap_i2c_runtime_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
 
-	omap_i2c_unidle(_dev);
+	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
+		omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	}
+
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (_dev->iestate)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
 
 	return 0;
 }
-- 
1.7.1

[PATCHv5 01/18] I2C: OMAP: make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME

[Shubhrajyoti D]

The functions omap_i2c_unidle/idle are called from omap_i2c_runtime_resume
and omap_i2c_runtime_suspend which is compiled for CONFIG_PM_RUNTIME.
This patch removes the omap_i2c_unidle/idle functions and folds them
into the runtime callbacks.

This fixes the below warn when CONFIG_PM_RUNTIME is not defined

 CC      arch/arm/mach-omap2/board-ti8168evm.o
drivers/i2c/busses/i2c-omap.c:272: warning: 'omap_i2c_unidle' defined but not used
drivers/i2c/busses/i2c-omap.c:293: warning: 'omap_i2c_idle' defined but not used
  CC      net/ipv4/ip_forward.o

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   75 +++++++++++++++++-----------------------
 1 files changed, 32 insertions(+), 43 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 801df60..4f4188d 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -269,47 +269,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static void omap_i2c_unidle(struct omap_i2c_dev *dev)
-{
-	if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
-		omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
-		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
-	}
-
-	/*
-	 * Don't write to this register if the IE state is 0 as it can
-	 * cause deadlock.
-	 */
-	if (dev->iestate)
-		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
-}
-
-static void omap_i2c_idle(struct omap_i2c_dev *dev)
-{
-	u16 iv;
-
-	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
-	if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
-		omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
-	else
-		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
-
-	if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
-		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
-	} else {
-		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
-
-		/* Flush posted write */
-		omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
-	}
-}
-
 static int omap_i2c_init(struct omap_i2c_dev *dev)
 {
 	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
@@ -1163,8 +1122,22 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+	u16 iv;
+
+	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
+	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
+	else
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
+		iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
+	} else {
+		omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate);
 
-	omap_i2c_idle(_dev);
+		/* Flush posted write */
+		omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG);
+	}
 
 	return 0;
 }
@@ -1174,7 +1147,23 @@ static int omap_i2c_runtime_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
 
-	omap_i2c_unidle(_dev);
+	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
+		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
+		omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
+		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	}
+
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (_dev->iestate)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
 
 	return 0;
 }
-- 
1.7.1

[PATCHv5 04/18] I2C: OMAP: I2C register restore only if context is lost

[Shubhrajyoti D]

 Currently i2c register restore is done always.
 Adding conditional restore.
 The i2c register restore is done only if the context is lost.
 Also remove the definition of SYSS_RESETDONE_MASK and use the
 one in omap_hwmod.h.

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 arch/arm/plat-omap/i2c.c      |    3 ++
 drivers/i2c/busses/i2c-omap.c |   52 ++++++++++++++++++++++++++--------------
 include/linux/i2c-omap.h      |    1 +
 3 files changed, 38 insertions(+), 18 deletions(-)

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index db071bc..4ccab07 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -179,6 +179,9 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	 */
 	if (cpu_is_omap34xx())
 		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
+
+	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a882558..45389db 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,6 +43,7 @@
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
+#include <plat/omap_device.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -157,9 +158,6 @@ enum {
 #define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
 
-/* OCP_SYSSTATUS bit definitions */
-#define SYSS_RESETDONE_MASK		(1 << 0)
-
 /* OCP_SYSCONFIG bit definitions */
 #define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
 #define SYSC_SIDLEMODE_MASK		(0x3 << 3)
@@ -184,6 +182,7 @@ struct omap_i2c_dev {
 	u32			latency;	/* maximum mpu wkup latency */
 	void			(*set_mpu_wkup_lat)(struct device *dev,
 						    long latency);
+	int			(*get_context_loss_count)(struct device *dev);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			dtrev;		/* extra revision from DT */
 	u32			flags;
@@ -206,6 +205,7 @@ struct omap_i2c_dev {
 	u16			syscstate;
 	u16			westate;
 	u16			errata;
+	int			dev_lost_count;
 };
 
 static const u8 reg_map_ip_v1[] = {
@@ -1025,6 +1025,7 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->speed = pdata->clkrate;
 		dev->flags = pdata->flags;
 		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+		dev->get_context_loss_count = pdata->get_context_loss_count;
 		dev->dtrev = pdata->rev;
 	}
 
@@ -1151,12 +1152,32 @@ omap_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_RUNTIME
+static void omap_i2c_restore(struct omap_i2c_dev *dev)
+{
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (dev->iestate)
+		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+
+}
 static int omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
 	u16 iv;
 
+	if (_dev->get_context_loss_count)
+		_dev->dev_lost_count = _dev->get_context_loss_count(dev);
+
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
 	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
 		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
@@ -1179,24 +1200,19 @@ static int omap_i2c_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+	int loss_cnt;
 
-	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
-		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
-		omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	if (_dev->get_context_loss_count) {
+		loss_cnt = _dev->get_context_loss_count(dev);
+		if (loss_cnt < 0)
+			return loss_cnt;
+
+		if (_dev->dev_lost_count == loss_cnt && _dev->dev_lost_count)
+			return 0;
 	}
 
-	/*
-	 * Don't write to this register if the IE state is 0 as it can
-	 * cause deadlock.
-	 */
-	if (_dev->iestate)
-		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
+	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE)
+		omap_i2c_restore(_dev);
 
 	return 0;
 }
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 92a0dc7..c76cbc0 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -35,6 +35,7 @@ struct omap_i2c_bus_platform_data {
 	u32		rev;
 	u32		flags;
 	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+	int		(*get_context_loss_count)(struct device *dev);
 };
 
 #endif
-- 
1.7.1

[PATCHv5 04/18] I2C: OMAP: I2C register restore only if context is lost

[Shubhrajyoti D]

 Currently i2c register restore is done always.
 Adding conditional restore.
 The i2c register restore is done only if the context is lost.
 Also remove the definition of SYSS_RESETDONE_MASK and use the
 one in omap_hwmod.h.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 arch/arm/plat-omap/i2c.c      |    3 ++
 drivers/i2c/busses/i2c-omap.c |   52 ++++++++++++++++++++++++++--------------
 include/linux/i2c-omap.h      |    1 +
 3 files changed, 38 insertions(+), 18 deletions(-)

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index db071bc..4ccab07 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -179,6 +179,9 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	 */
 	if (cpu_is_omap34xx())
 		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
+
+	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a882558..45389db 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,6 +43,7 @@
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
+#include <plat/omap_device.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -157,9 +158,6 @@ enum {
 #define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
 #define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
 
-/* OCP_SYSSTATUS bit definitions */
-#define SYSS_RESETDONE_MASK		(1 << 0)
-
 /* OCP_SYSCONFIG bit definitions */
 #define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
 #define SYSC_SIDLEMODE_MASK		(0x3 << 3)
@@ -184,6 +182,7 @@ struct omap_i2c_dev {
 	u32			latency;	/* maximum mpu wkup latency */
 	void			(*set_mpu_wkup_lat)(struct device *dev,
 						    long latency);
+	int			(*get_context_loss_count)(struct device *dev);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			dtrev;		/* extra revision from DT */
 	u32			flags;
@@ -206,6 +205,7 @@ struct omap_i2c_dev {
 	u16			syscstate;
 	u16			westate;
 	u16			errata;
+	int			dev_lost_count;
 };
 
 static const u8 reg_map_ip_v1[] = {
@@ -1025,6 +1025,7 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->speed = pdata->clkrate;
 		dev->flags = pdata->flags;
 		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+		dev->get_context_loss_count = pdata->get_context_loss_count;
 		dev->dtrev = pdata->rev;
 	}
 
@@ -1151,12 +1152,32 @@ omap_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_RUNTIME
+static void omap_i2c_restore(struct omap_i2c_dev *dev)
+{
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
+	omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (dev->iestate)
+		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+
+}
 static int omap_i2c_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
 	u16 iv;
 
+	if (_dev->get_context_loss_count)
+		_dev->dev_lost_count = _dev->get_context_loss_count(dev);
+
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
 	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
 		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
@@ -1179,24 +1200,19 @@ static int omap_i2c_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+	int loss_cnt;
 
-	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
-		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0);
-		omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate);
-		omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	if (_dev->get_context_loss_count) {
+		loss_cnt = _dev->get_context_loss_count(dev);
+		if (loss_cnt < 0)
+			return loss_cnt;
+
+		if (_dev->dev_lost_count == loss_cnt && _dev->dev_lost_count)
+			return 0;
 	}
 
-	/*
-	 * Don't write to this register if the IE state is 0 as it can
-	 * cause deadlock.
-	 */
-	if (_dev->iestate)
-		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate);
+	if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE)
+		omap_i2c_restore(_dev);
 
 	return 0;
 }
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 92a0dc7..c76cbc0 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -35,6 +35,7 @@ struct omap_i2c_bus_platform_data {
 	u32		rev;
 	u32		flags;
 	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+	int		(*get_context_loss_count)(struct device *dev);
 };
 
 #endif
-- 
1.7.1

[PATCHv5 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4

[Shubhrajyoti D]

On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only
the arbitration lost interrupt. The patch intends to fix the same by writing 0
to the IE register clearing all interrupts.

This is based on the work done by Vikram Pandita <vikram.pandita-l0cyMroinI0@public.gmane.org>.

The  changes from the original patch ...
-  Does not use the IRQENABLE_CLR register to clear as it is not mentioned
  to be legacy register IRQENABLE_CLR helps in  atomically
  setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are
  clearing all interrupts.

Cc: Vikram Pandita <vikram.pandita-l0cyMroinI0@public.gmane.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 45389db..2769f67 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1179,10 +1179,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 		_dev->dev_lost_count = _dev->get_context_loss_count(dev);
 
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
-	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
-		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
-	else
-		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+	omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
 
 	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
 		iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
-- 
1.7.1

[PATCHv5 05/18] I2C: OMAP: Fix the interrupt clearing in OMAP4

[Shubhrajyoti D]

On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only
the arbitration lost interrupt. The patch intends to fix the same by writing 0
to the IE register clearing all interrupts.

This is based on the work done by Vikram Pandita <vikram.pandita@ti.com>.

The  changes from the original patch ...
-  Does not use the IRQENABLE_CLR register to clear as it is not mentioned
  to be legacy register IRQENABLE_CLR helps in  atomically
  setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are
  clearing all interrupts.

Cc: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 45389db..2769f67 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1179,10 +1179,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 		_dev->dev_lost_count = _dev->get_context_loss_count(dev);
 
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
-	if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
-		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
-	else
-		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+	omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
 
 	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
 		iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
-- 
1.7.1

[PATCHv5 07/18] I2C: OMAP: Optimise the remove code

[Shubhrajyoti D]

The omap_i2c_remove function may not be needed after
device exit so the memory could be freed.

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 3670088..2096726 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1134,8 +1134,7 @@ err_release_region:
 	return r;
 }
 
-static int
-omap_i2c_remove(struct platform_device *pdev)
+static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
 	struct resource		*mem;
@@ -1228,7 +1227,7 @@ static struct dev_pm_ops omap_i2c_pm_ops = {
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
-	.remove		= omap_i2c_remove,
+	.remove		= __devexit_p(omap_i2c_remove),
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
-- 
1.7.1

[PATCHv5 07/18] I2C: OMAP: Optimise the remove code

[Shubhrajyoti D]

The omap_i2c_remove function may not be needed after
device exit so the memory could be freed.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 3670088..2096726 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1134,8 +1134,7 @@ err_release_region:
 	return r;
 }
 
-static int
-omap_i2c_remove(struct platform_device *pdev)
+static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
 	struct resource		*mem;
@@ -1228,7 +1227,7 @@ static struct dev_pm_ops omap_i2c_pm_ops = {
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
-	.remove		= omap_i2c_remove,
+	.remove		= __devexit_p(omap_i2c_remove),
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
-- 
1.7.1

[PATCHv5 09/18] I2C: OMAP: Correct I2C revision for OMAP3

[Shubhrajyoti D]

From: Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>

The OMAP3530 is based upon the same silicon as the OMAP3430 and so the I2C
revision is the same for 3430 and 3530. However, the OMAP3630 device has the
same I2C revision as OMAP4. Correct the revision definition to reflect this.

This patch is based on work done by Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>
Changes from his patch
- Update OMAP_I2C_REV_ON_3430 also to reflect that it is same as 3530

Signed-off-by: Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a461097..959e97c 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -50,8 +50,8 @@
 
 /* I2C controller revisions present on specific hardware */
 #define OMAP_I2C_REV_ON_2430		0x36
-#define OMAP_I2C_REV_ON_3430		0x3C
-#define OMAP_I2C_REV_ON_3530_4430	0x40
+#define OMAP_I2C_REV_ON_3430_3530	0x3C
+#define OMAP_I2C_REV_ON_3630_4430	0x40
 
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -298,7 +298,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev)
 			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
 					   SYSC_AUTOIDLE_MASK);
 
-		} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+		} else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
 			dev->syscstate = SYSC_AUTOIDLE_MASK;
 			dev->syscstate |= SYSC_ENAWAKEUP_MASK;
 			dev->syscstate |= (SYSC_IDLEMODE_SMART <<
@@ -1051,7 +1051,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
-	if (dev->rev <= OMAP_I2C_REV_ON_3430)
+	if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
 		dev->errata |= I2C_OMAP3_1P153;
 
 	if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
@@ -1069,7 +1069,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 		dev->fifo_size = (dev->fifo_size / 2);
 
-		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
+		if (dev->rev >= OMAP_I2C_REV_ON_3630_4430)
 			dev->b_hw = 0; /* Disable hardware fixes */
 		else
 			dev->b_hw = 1; /* Enable hardware fixes */
-- 
1.7.1

[PATCHv5 09/18] I2C: OMAP: Correct I2C revision for OMAP3

[Shubhrajyoti D]

From: Jon Hunter <jon-hunter@ti.com>

The OMAP3530 is based upon the same silicon as the OMAP3430 and so the I2C
revision is the same for 3430 and 3530. However, the OMAP3630 device has the
same I2C revision as OMAP4. Correct the revision definition to reflect this.

This patch is based on work done by Jon Hunter <jon-hunter@ti.com>
Changes from his patch
- Update OMAP_I2C_REV_ON_3430 also to reflect that it is same as 3530

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a461097..959e97c 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -50,8 +50,8 @@
 
 /* I2C controller revisions present on specific hardware */
 #define OMAP_I2C_REV_ON_2430		0x36
-#define OMAP_I2C_REV_ON_3430		0x3C
-#define OMAP_I2C_REV_ON_3530_4430	0x40
+#define OMAP_I2C_REV_ON_3430_3530	0x3C
+#define OMAP_I2C_REV_ON_3630_4430	0x40
 
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -298,7 +298,7 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev)
 			omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
 					   SYSC_AUTOIDLE_MASK);
 
-		} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
+		} else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) {
 			dev->syscstate = SYSC_AUTOIDLE_MASK;
 			dev->syscstate |= SYSC_ENAWAKEUP_MASK;
 			dev->syscstate |= (SYSC_IDLEMODE_SMART <<
@@ -1051,7 +1051,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
-	if (dev->rev <= OMAP_I2C_REV_ON_3430)
+	if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
 		dev->errata |= I2C_OMAP3_1P153;
 
 	if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
@@ -1069,7 +1069,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 		dev->fifo_size = (dev->fifo_size / 2);
 
-		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
+		if (dev->rev >= OMAP_I2C_REV_ON_3630_4430)
 			dev->b_hw = 0; /* Disable hardware fixes */
 		else
 			dev->b_hw = 1; /* Enable hardware fixes */
-- 
1.7.1

[PATCHv5 10/18] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero

[Shubhrajyoti D]

By definition, wait_for_completion_timeout() returns an unsigned value and
therefore, it is not necessary to check if the return value is less than zero
as this is not possible.

This is based on a patch from Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>
Changes from his patch
- Declare a long as the wait_for_completion_timeout returns long.

Original patch is
http://git.omapzoom.org/?p=kernel/omap.git;a=commitdiff;h=ea02cece7b0000bc736e60c4188a11aaa74bc6e6

Cc : Jon Hunter <jon-hunter-l0cyMroinI0@public.gmane.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 959e97c..121c52e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -502,7 +502,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 			     struct i2c_msg *msg, int stop)
 {
 	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
-	int r;
+	unsigned long timeout;
 	u16 w;
 
 	dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
@@ -570,12 +570,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 * REVISIT: We should abort the transfer on signals, but the bus goes
 	 * into arbitration and we're currently unable to recover from it.
 	 */
-	r = wait_for_completion_timeout(&dev->cmd_complete,
-					OMAP_I2C_TIMEOUT);
+	timeout = wait_for_completion_timeout(&dev->cmd_complete,
+						OMAP_I2C_TIMEOUT);
 	dev->buf_len = 0;
-	if (r < 0)
-		return r;
-	if (r == 0) {
+	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
-- 
1.7.1

[PATCHv5 10/18] I2C: OMAP: Don't check if wait_for_completion_timeout() returns less than zero

[Shubhrajyoti D]

By definition, wait_for_completion_timeout() returns an unsigned value and
therefore, it is not necessary to check if the return value is less than zero
as this is not possible.

This is based on a patch from Jon Hunter <jon-hunter@ti.com>
Changes from his patch
- Declare a long as the wait_for_completion_timeout returns long.

Original patch is
http://git.omapzoom.org/?p=kernel/omap.git;a=commitdiff;h=ea02cece7b0000bc736e60c4188a11aaa74bc6e6

Cc : Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 959e97c..121c52e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -502,7 +502,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 			     struct i2c_msg *msg, int stop)
 {
 	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
-	int r;
+	unsigned long timeout;
 	u16 w;
 
 	dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
@@ -570,12 +570,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 * REVISIT: We should abort the transfer on signals, but the bus goes
 	 * into arbitration and we're currently unable to recover from it.
 	 */
-	r = wait_for_completion_timeout(&dev->cmd_complete,
-					OMAP_I2C_TIMEOUT);
+	timeout = wait_for_completion_timeout(&dev->cmd_complete,
+						OMAP_I2C_TIMEOUT);
 	dev->buf_len = 0;
-	if (r < 0)
-		return r;
-	if (r == 0) {
+	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		omap_i2c_reset(dev);
 		omap_i2c_init(dev);
-- 
1.7.1

[PATCHv5 11/18] I2C: OMAP: use devm_* functions

[Shubhrajyoti D]

The various devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_kzalloc, devm_request_mem_region and
devm_ioremap for data that is allocated in the probe function of a platform
device and is only freed in the remove function.

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   29 +++++++++--------------------
 1 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 121c52e..86be475 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -995,17 +995,17 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
+	ioarea = devm_request_mem_region(&pdev->dev, mem->start,
+			resource_size(mem), pdev->name);
 	if (!ioarea) {
 		dev_err(&pdev->dev, "I2C region already claimed\n");
 		return -EBUSY;
 	}
 
-	dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
 	if (!dev) {
-		r = -ENOMEM;
-		goto err_release_region;
+		dev_err(&pdev->dev, "Menory allocation failed\n");
+		return -ENOMEM;
 	}
 
 	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
@@ -1029,11 +1029,10 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
-	dev->base = ioremap(mem->start, resource_size(mem));
-	if (!dev->base) {
-		r = -ENOMEM;
-		goto err_free_mem;
-	}
+	dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+	if (!dev->base)
+		return -ENOMEM;
+
 
 	platform_set_drvdata(pdev, dev);
 
@@ -1121,13 +1120,8 @@ err_free_irq:
 err_unuse_clocks:
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(dev->dev);
-	iounmap(dev->base);
 	pm_runtime_disable(&pdev->dev);
-err_free_mem:
 	platform_set_drvdata(pdev, NULL);
-	kfree(dev);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
 
 	return r;
 }
@@ -1135,7 +1129,6 @@ err_release_region:
 static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
-	struct resource		*mem;
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -1143,10 +1136,6 @@ static int __devexit omap_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&dev->adapter);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_disable(&pdev->dev);
-	iounmap(dev->base);
-	kfree(dev);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
-- 
1.7.1

[PATCHv5 11/18] I2C: OMAP: use devm_* functions

[Shubhrajyoti D]

The various devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_kzalloc, devm_request_mem_region and
devm_ioremap for data that is allocated in the probe function of a platform
device and is only freed in the remove function.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   29 +++++++++--------------------
 1 files changed, 9 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 121c52e..86be475 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -995,17 +995,17 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
+	ioarea = devm_request_mem_region(&pdev->dev, mem->start,
+			resource_size(mem), pdev->name);
 	if (!ioarea) {
 		dev_err(&pdev->dev, "I2C region already claimed\n");
 		return -EBUSY;
 	}
 
-	dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
 	if (!dev) {
-		r = -ENOMEM;
-		goto err_release_region;
+		dev_err(&pdev->dev, "Menory allocation failed\n");
+		return -ENOMEM;
 	}
 
 	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
@@ -1029,11 +1029,10 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
-	dev->base = ioremap(mem->start, resource_size(mem));
-	if (!dev->base) {
-		r = -ENOMEM;
-		goto err_free_mem;
-	}
+	dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+	if (!dev->base)
+		return -ENOMEM;
+
 
 	platform_set_drvdata(pdev, dev);
 
@@ -1121,13 +1120,8 @@ err_free_irq:
 err_unuse_clocks:
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(dev->dev);
-	iounmap(dev->base);
 	pm_runtime_disable(&pdev->dev);
-err_free_mem:
 	platform_set_drvdata(pdev, NULL);
-	kfree(dev);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
 
 	return r;
 }
@@ -1135,7 +1129,6 @@ err_release_region:
 static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
-	struct resource		*mem;
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -1143,10 +1136,6 @@ static int __devexit omap_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&dev->adapter);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_disable(&pdev->dev);
-	iounmap(dev->base);
-	kfree(dev);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
 	return 0;
 }
 
-- 
1.7.1

[PATCHv5 13/18] I2C: OMAP: Handle error check for pm runtime

[Shubhrajyoti D]

If PM runtime get_sync fails return with the error
so that no further reads/writes goes through the interface.
This will avoid possible abort.

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   13 ++++++++++---
 1 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8258597..95f1b2f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -616,7 +616,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	int i;
 	int r;
 
-	pm_runtime_get_sync(dev->dev);
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0)
+		return r;
 
 	r = omap_i2c_wait_for_bb(dev);
 	if (r < 0)
@@ -1044,7 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->regs = (u8 *)reg_map_ip_v1;
 
 	pm_runtime_enable(dev->dev);
-	pm_runtime_get_sync(dev->dev);
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0)
+		return r;
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
@@ -1129,12 +1133,15 @@ err_unuse_clocks:
 static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
+	int ret;
 
 	platform_set_drvdata(pdev, NULL);
 
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		return ret;
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-- 
1.7.1

[PATCHv5 13/18] I2C: OMAP: Handle error check for pm runtime

[Shubhrajyoti D]

If PM runtime get_sync fails return with the error
so that no further reads/writes goes through the interface.
This will avoid possible abort.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   13 ++++++++++---
 1 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8258597..95f1b2f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -616,7 +616,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	int i;
 	int r;
 
-	pm_runtime_get_sync(dev->dev);
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0)
+		return r;
 
 	r = omap_i2c_wait_for_bb(dev);
 	if (r < 0)
@@ -1044,7 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->regs = (u8 *)reg_map_ip_v1;
 
 	pm_runtime_enable(dev->dev);
-	pm_runtime_get_sync(dev->dev);
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0)
+		return r;
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
@@ -1129,12 +1133,15 @@ err_unuse_clocks:
 static int __devexit omap_i2c_remove(struct platform_device *pdev)
 {
 	struct omap_i2c_dev	*dev = platform_get_drvdata(pdev);
+	int ret;
 
 	platform_set_drvdata(pdev, NULL);
 
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
-	pm_runtime_get_sync(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		return ret;
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-- 
1.7.1

[PATCHv5 15/18] I2C: OMAP: make the read ready processing a separate function

[Shubhrajyoti D]

No functional change. Makes the read ready processing a separate
function. This is to avoid extremely long level of indentation.

Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |   86 +++++++++++++++++++++-------------------
 1 files changed, 45 insertions(+), 41 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a5b1ec1..c113f41 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -784,6 +784,49 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 	return 0;
 }
 
+static int process_read_rdy(struct omap_i2c_dev *dev)
+{
+	u8 num_bytes = 1;
+	u16 stat, w;
+
+	if (dev->errata & I2C_OMAP_ERRATA_I207)
+		i2c_omap_errata_i207(dev, stat);
+
+	if (dev->fifo_size) {
+		if (stat & OMAP_I2C_STAT_RRDY)
+			num_bytes = dev->fifo_size;
+		else    /* read RXSTAT on RDR interrupt */
+			num_bytes = (omap_i2c_read_reg(dev,
+					OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
+	}
+	while (num_bytes) {
+		num_bytes--;
+		w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+		if (dev->buf_len) {
+			*dev->buf++ = w;
+			dev->buf_len--;
+			/*
+			 * Data reg in 2430, omap3 and omap4 is 8 bit wide
+			 */
+			if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
+				if (dev->buf_len) {
+					*dev->buf++ = w >> 8;
+					dev->buf_len--;
+				}
+			}
+		} else {
+			if (stat & OMAP_I2C_STAT_RRDY)
+				dev_err(dev->dev,
+					"RRDY IRQ while no data requested\n");
+			if (stat & OMAP_I2C_STAT_RDR)
+				dev_err(dev->dev,
+					"RDR IRQ while no data requested\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
 {
@@ -834,48 +877,9 @@ complete:
 			return IRQ_HANDLED;
 		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
-			u8 num_bytes = 1;
-
-			if (dev->errata & I2C_OMAP_ERRATA_I207)
-				i2c_omap_errata_i207(dev, stat);
+			if (process_read_rdy(dev) == -EIO)
+				break;
 
-			if (dev->fifo_size) {
-				if (stat & OMAP_I2C_STAT_RRDY)
-					num_bytes = dev->fifo_size;
-				else    /* read RXSTAT on RDR interrupt */
-					num_bytes = (omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG)
-							>> 8) & 0x3F;
-			}
-			while (num_bytes) {
-				num_bytes--;
-				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
-				if (dev->buf_len) {
-					*dev->buf++ = w;
-					dev->buf_len--;
-					/*
-					 * Data reg in 2430, omap3 and
-					 * omap4 is 8 bit wide
-					 */
-					if (dev->flags &
-						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
-						if (dev->buf_len) {
-							*dev->buf++ = w >> 8;
-							dev->buf_len--;
-						}
-					}
-				} else {
-					if (stat & OMAP_I2C_STAT_RRDY)
-						dev_err(dev->dev,
-							"RRDY IRQ while no data"
-								" requested\n");
-					if (stat & OMAP_I2C_STAT_RDR)
-						dev_err(dev->dev,
-							"RDR IRQ while no data"
-								" requested\n");
-					break;
-				}
-			}
 			omap_i2c_ack_stat(dev,
 				stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 			continue;
-- 
1.7.1

[PATCHv5 15/18] I2C: OMAP: make the read ready processing a separate function

[Shubhrajyoti D]

No functional change. Makes the read ready processing a separate
function. This is to avoid extremely long level of indentation.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   86 +++++++++++++++++++++-------------------
 1 files changed, 45 insertions(+), 41 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a5b1ec1..c113f41 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -784,6 +784,49 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 	return 0;
 }
 
+static int process_read_rdy(struct omap_i2c_dev *dev)
+{
+	u8 num_bytes = 1;
+	u16 stat, w;
+
+	if (dev->errata & I2C_OMAP_ERRATA_I207)
+		i2c_omap_errata_i207(dev, stat);
+
+	if (dev->fifo_size) {
+		if (stat & OMAP_I2C_STAT_RRDY)
+			num_bytes = dev->fifo_size;
+		else    /* read RXSTAT on RDR interrupt */
+			num_bytes = (omap_i2c_read_reg(dev,
+					OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
+	}
+	while (num_bytes) {
+		num_bytes--;
+		w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+		if (dev->buf_len) {
+			*dev->buf++ = w;
+			dev->buf_len--;
+			/*
+			 * Data reg in 2430, omap3 and omap4 is 8 bit wide
+			 */
+			if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
+				if (dev->buf_len) {
+					*dev->buf++ = w >> 8;
+					dev->buf_len--;
+				}
+			}
+		} else {
+			if (stat & OMAP_I2C_STAT_RRDY)
+				dev_err(dev->dev,
+					"RRDY IRQ while no data requested\n");
+			if (stat & OMAP_I2C_STAT_RDR)
+				dev_err(dev->dev,
+					"RDR IRQ while no data requested\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
 {
@@ -834,48 +877,9 @@ complete:
 			return IRQ_HANDLED;
 		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
-			u8 num_bytes = 1;
-
-			if (dev->errata & I2C_OMAP_ERRATA_I207)
-				i2c_omap_errata_i207(dev, stat);
+			if (process_read_rdy(dev) == -EIO)
+				break;
 
-			if (dev->fifo_size) {
-				if (stat & OMAP_I2C_STAT_RRDY)
-					num_bytes = dev->fifo_size;
-				else    /* read RXSTAT on RDR interrupt */
-					num_bytes = (omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG)
-							>> 8) & 0x3F;
-			}
-			while (num_bytes) {
-				num_bytes--;
-				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
-				if (dev->buf_len) {
-					*dev->buf++ = w;
-					dev->buf_len--;
-					/*
-					 * Data reg in 2430, omap3 and
-					 * omap4 is 8 bit wide
-					 */
-					if (dev->flags &
-						 OMAP_I2C_FLAG_16BIT_DATA_REG) {
-						if (dev->buf_len) {
-							*dev->buf++ = w >> 8;
-							dev->buf_len--;
-						}
-					}
-				} else {
-					if (stat & OMAP_I2C_STAT_RRDY)
-						dev_err(dev->dev,
-							"RRDY IRQ while no data"
-								" requested\n");
-					if (stat & OMAP_I2C_STAT_RDR)
-						dev_err(dev->dev,
-							"RDR IRQ while no data"
-								" requested\n");
-					break;
-				}
-			}
 			omap_i2c_ack_stat(dev,
 				stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
 			continue;
-- 
1.7.1

[PATCHv5 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached

[Shubhrajyoti D]

Currently in the 1.153 errata handling while waiting for transmitter
underflow if NACK is got the XUDF flag is also set.
The flag is set after wait for the condition is over.

Cc: Alexander Shishkin <virtuoso-0lOfPCoBze7YtjvyW6yDsg@public.gmane.org>
Cc: Moiz Sonasath <m-sonasath-l0cyMroinI0@public.gmane.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti-l0cyMroinI0@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 51576d6..a3160d1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -763,7 +763,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 		if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
 							OMAP_I2C_STAT_XDR));
-			*err |= OMAP_I2C_STAT_XUDF;
 			return -ETIMEDOUT;
 		}
 
@@ -776,6 +775,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 		return 0;
 	}
 
+	*err |= OMAP_I2C_STAT_XUDF;
 	return 0;
 }
 
-- 
1.7.1

[PATCHv5 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached

[Shubhrajyoti D]

Currently in the 1.153 errata handling while waiting for transmitter
underflow if NACK is got the XUDF flag is also set.
The flag is set after wait for the condition is over.

Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 51576d6..a3160d1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -763,7 +763,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 		if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
 							OMAP_I2C_STAT_XDR));
-			*err |= OMAP_I2C_STAT_XUDF;
 			return -ETIMEDOUT;
 		}
 
@@ -776,6 +775,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
 		return 0;
 	}
 
+	*err |= OMAP_I2C_STAT_XUDF;
 	return 0;
 }
 
-- 
1.7.1

Re: [PATCHv5 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached

[Shubhrajyoti]

Hi Moiz,
Thanks for your review.

On Tuesday 03 April 2012 09:41 PM, Sonasath, Moiz wrote:
> Shubhrajyoti,
>
> On Tue, Apr 3, 2012 at 11:02 AM, Shubhrajyoti D <shubhrajyoti@ti.com> wrote:
>
>> Currently in the 1.153 errata handling while waiting for transmitter
>> underflow if NACK is got the XUDF flag is also set.
>> The flag is set after wait for the condition is over.
>>
>> Cc: Alexander Shishkin <virtuoso@slind.org>
>> Cc: Moiz Sonasath <m-sonasath@ti.com>
>> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
>> ---
>>  drivers/i2c/busses/i2c-omap.c |    2 +-
>>  1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
>> index 51576d6..a3160d1 100644
>> --- a/drivers/i2c/busses/i2c-omap.c
>> +++ b/drivers/i2c/busses/i2c-omap.c
>> @@ -763,7 +763,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev
>> *dev, u16 *stat, int *err)
>>                if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
>>                        omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
>>                                                        OMAP_I2C_STAT_XDR));
>> -                       *err |= OMAP_I2C_STAT_XUDF;
>>
> I think we should set the NACK|AL err flag here instead??
On return of negative values there is a goto and  those flags are set there.
Did I miss something?

>
>>                        return -ETIMEDOUT;
>>                }
>>
>> @@ -776,6 +775,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev
>> *dev, u16 *stat, int *err)
>>                return 0;
>>        }
>>
>> +       *err |= OMAP_I2C_STAT_XUDF;
>>
> Ack for this change.
Thanks.

[PATCHv5 17/18] I2C: OMAP: Do not set the XUDF if the underflow is not reached

[Shubhrajyoti]

Hi Moiz,
Thanks for your review.

On Tuesday 03 April 2012 09:41 PM, Sonasath, Moiz wrote:
> Shubhrajyoti,
>
> On Tue, Apr 3, 2012 at 11:02 AM, Shubhrajyoti D <shubhrajyoti@ti.com> wrote:
>
>> Currently in the 1.153 errata handling while waiting for transmitter
>> underflow if NACK is got the XUDF flag is also set.
>> The flag is set after wait for the condition is over.
>>
>> Cc: Alexander Shishkin <virtuoso@slind.org>
>> Cc: Moiz Sonasath <m-sonasath@ti.com>
>> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
>> ---
>>  drivers/i2c/busses/i2c-omap.c |    2 +-
>>  1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
>> index 51576d6..a3160d1 100644
>> --- a/drivers/i2c/busses/i2c-omap.c
>> +++ b/drivers/i2c/busses/i2c-omap.c
>> @@ -763,7 +763,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev
>> *dev, u16 *stat, int *err)
>>                if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
>>                        omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
>>                                                        OMAP_I2C_STAT_XDR));
>> -                       *err |= OMAP_I2C_STAT_XUDF;
>>
> I think we should set the NACK|AL err flag here instead??
On return of negative values there is a goto and  those flags are set there.
Did I miss something?

>
>>                        return -ETIMEDOUT;
>>                }
>>
>> @@ -776,6 +775,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev
>> *dev, u16 *stat, int *err)
>>                return 0;
>>        }
>>
>> +       *err |= OMAP_I2C_STAT_XUDF;
>>
> Ack for this change.
Thanks.

[PATCHv5 08/18] I2C: OMAP: Fix the error handling

[Shubhrajyoti D]

Currently in probe
      pm_runtime_put(dev->dev);

...
        /* i2c device drivers may be active on return from add_adapter() */
        adap->nr = pdev->id;
        r = i2c_add_numbered_adapter(adap);
        if (r) {
                dev_err(dev->dev, "failure adding adapter\n");
                goto err_free_irq;
        }
...

        return 0;

err_free_irq:
        free_irq(dev->irq, dev);
err_unuse_clocks:
        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
        pm_runtime_put(dev->dev);

This may access the i2c registers without the clocks.
Attempting to fix the same by moving the pm_rintime_put after the error check.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2096726..a461097 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1095,8 +1095,6 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
 		 dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 
-	pm_runtime_put(dev->dev);
-
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
@@ -1116,6 +1114,8 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	of_i2c_register_devices(adap);
 
+	pm_runtime_put(dev->dev);
+
 	return 0;
 
 err_free_irq:
-- 
1.7.1

[PATCHv5 08/18] I2C: OMAP: Fix the error handling

[Shubhrajyoti D]

Currently in probe
      pm_runtime_put(dev->dev);

...
        /* i2c device drivers may be active on return from add_adapter() */
        adap->nr = pdev->id;
        r = i2c_add_numbered_adapter(adap);
        if (r) {
                dev_err(dev->dev, "failure adding adapter\n");
                goto err_free_irq;
        }
...

        return 0;

err_free_irq:
        free_irq(dev->irq, dev);
err_unuse_clocks:
        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
        pm_runtime_put(dev->dev);

This may access the i2c registers without the clocks.
Attempting to fix the same by moving the pm_rintime_put after the error check.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2096726..a461097 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1095,8 +1095,6 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
 		 dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 
-	pm_runtime_put(dev->dev);
-
 	adap = &dev->adapter;
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
@@ -1116,6 +1114,8 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	of_i2c_register_devices(adap);
 
+	pm_runtime_put(dev->dev);
+
 	return 0;
 
 err_free_irq:
-- 
1.7.1

[PATCHv5 12/18] I2C: OMAP: Fix the crash in i2c remove

[Shubhrajyoti D]

    In omap_i2c_remove we are accessing the I2C_CON register without
    enabling the clocks. Fix the same by enabling the clocks and disabling
    it.
    This fixes the following crash.
    [  154.723022] ------------[ cut here ]------------
    [  154.725677] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:112 l3_interrupt_handler+0x1b4/0x1c4()
    [  154.725677] L3 custom error: MASTER:MPU TARGET:L4 PER2
    [  154.742614] Modules linked in: i2c_omap(-)
    [  154.746948] Backtrace:
    [  154.746948] [<c0013078>] (dump_backtrace+0x0/0x110) from [<c026c158>] (dump_stack+0x18/0x1c)
    [  154.752716]  r6:00000070 r5:c002c43c r4:df9b9e98 r3:df9b8000
    [  154.764465] [<c026c140>] (dump_stack+0x0/0x1c) from [<c0041a2c>] (warn_slowpath_common+0x5c/0x6c)
    [  154.768341] [<c00419d0>] (warn_slowpath_common+0x0/0x6c) from [<c0041ae0>] (warn_slowpath_fmt+0x38/0x40)
    [  154.776153]  r8:00000180 r7:c0361594 r6:c0379b48 r5:00080003 r4:e0838b00
    [  154.790771] r3:00000009
    [  154.791778] [<c0041aa8>] (warn_slowpath_fmt+0x0/0x40) from [<c002c43c>] (l3_interrupt_handler+0x1b4/0x1c4)
    [  154.803710]  r3:c0361598 r2:c02ef74c
    [  154.807403] [<c002c288>] (l3_interrupt_handler+0x0/0x1c4) from [<c0085f44>] (handle_irq_event_percpu+0x58/0
    [  154.818237]  r8:0000002a r7:00000000 r6:00000000 r5:df808054 r4:df8893c0
    [  154.825378] [<c0085eec>] (handle_irq_event_percpu+0x0/0x188) from [<c00860b8>] (handle_irq_event+0x44/0x64)
    [  154.835662] [<c0086074>] (handle_irq_event+0x0/0x64) from [<c0088ec0>] (handle_fasteoi_irq+0xa4/0x10c)
    [  154.845458]  r6:0000002a r5:df808054 r4:df808000 r3:c034a150
    [  154.846466] [<c0088e1c>] (handle_fasteoi_irq+0x0/0x10c) from [<c0085ed0>] (generic_handle_irq+0x30/0x38)
    [  154.854278]  r5:c034aa48 r4:0000002a
    [  154.862091] [<c0085ea0>] (generic_handle_irq+0x0/0x38) from [<c000fd38>] (handle_IRQ+0x60/0xc0)
    [  154.874450]  r4:c034ea70 r3:000001f8
    [  154.878234] [<c000fcd8>] (handle_IRQ+0x0/0xc0) from [<c0008478>] (gic_handle_irq+0x20/0x5c)
    [  154.887023]  r7:ffffff40 r6:df9b9fb0 r5:c034e2b4 r4:0000001a
    [  154.887054] [<c0008458>] (gic_handle_irq+0x0/0x5c) from [<c000ea80>] (__irq_usr+0x40/0x60)
    [  154.901153] Exception stack(0xdf9b9fb0 to 0xdf9b9ff8)
    [  154.907104] 9fa0:                                     beaf1f04 4006be00 0000000f 0000000c
    [  154.915710] 9fc0: 4006c000 00000000 00008034 ffffff40 00000007 00000000 00000000 0007b8d7
    [  154.916778] 9fe0: 00000000 beaf1b68 0000d23c 4005baf0 80000010 ffffffff
    [  154.931335]  r6:ffffffff r5:80000010 r4:4005baf0 r3:beaf1f04
    [  154.937316] ---[ end trace 1b75b31a2719ed21 ]--

Cc: <stable@vger.kernel.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 86be475..8258597 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1134,7 +1134,9 @@ static int __devexit omap_i2c_remove(struct platform_device *pdev)
 
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
+	pm_runtime_get_sync(&pdev->dev);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
-- 
1.7.1

[PATCHv5 12/18] I2C: OMAP: Fix the crash in i2c remove

[Shubhrajyoti D]

    In omap_i2c_remove we are accessing the I2C_CON register without
    enabling the clocks. Fix the same by enabling the clocks and disabling
    it.
    This fixes the following crash.
    [  154.723022] ------------[ cut here ]------------
    [  154.725677] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:112 l3_interrupt_handler+0x1b4/0x1c4()
    [  154.725677] L3 custom error: MASTER:MPU TARGET:L4 PER2
    [  154.742614] Modules linked in: i2c_omap(-)
    [  154.746948] Backtrace:
    [  154.746948] [<c0013078>] (dump_backtrace+0x0/0x110) from [<c026c158>] (dump_stack+0x18/0x1c)
    [  154.752716]  r6:00000070 r5:c002c43c r4:df9b9e98 r3:df9b8000
    [  154.764465] [<c026c140>] (dump_stack+0x0/0x1c) from [<c0041a2c>] (warn_slowpath_common+0x5c/0x6c)
    [  154.768341] [<c00419d0>] (warn_slowpath_common+0x0/0x6c) from [<c0041ae0>] (warn_slowpath_fmt+0x38/0x40)
    [  154.776153]  r8:00000180 r7:c0361594 r6:c0379b48 r5:00080003 r4:e0838b00
    [  154.790771] r3:00000009
    [  154.791778] [<c0041aa8>] (warn_slowpath_fmt+0x0/0x40) from [<c002c43c>] (l3_interrupt_handler+0x1b4/0x1c4)
    [  154.803710]  r3:c0361598 r2:c02ef74c
    [  154.807403] [<c002c288>] (l3_interrupt_handler+0x0/0x1c4) from [<c0085f44>] (handle_irq_event_percpu+0x58/0
    [  154.818237]  r8:0000002a r7:00000000 r6:00000000 r5:df808054 r4:df8893c0
    [  154.825378] [<c0085eec>] (handle_irq_event_percpu+0x0/0x188) from [<c00860b8>] (handle_irq_event+0x44/0x64)
    [  154.835662] [<c0086074>] (handle_irq_event+0x0/0x64) from [<c0088ec0>] (handle_fasteoi_irq+0xa4/0x10c)
    [  154.845458]  r6:0000002a r5:df808054 r4:df808000 r3:c034a150
    [  154.846466] [<c0088e1c>] (handle_fasteoi_irq+0x0/0x10c) from [<c0085ed0>] (generic_handle_irq+0x30/0x38)
    [  154.854278]  r5:c034aa48 r4:0000002a
    [  154.862091] [<c0085ea0>] (generic_handle_irq+0x0/0x38) from [<c000fd38>] (handle_IRQ+0x60/0xc0)
    [  154.874450]  r4:c034ea70 r3:000001f8
    [  154.878234] [<c000fcd8>] (handle_IRQ+0x0/0xc0) from [<c0008478>] (gic_handle_irq+0x20/0x5c)
    [  154.887023]  r7:ffffff40 r6:df9b9fb0 r5:c034e2b4 r4:0000001a
    [  154.887054] [<c0008458>] (gic_handle_irq+0x0/0x5c) from [<c000ea80>] (__irq_usr+0x40/0x60)
    [  154.901153] Exception stack(0xdf9b9fb0 to 0xdf9b9ff8)
    [  154.907104] 9fa0:                                     beaf1f04 4006be00 0000000f 0000000c
    [  154.915710] 9fc0: 4006c000 00000000 00008034 ffffff40 00000007 00000000 00000000 0007b8d7
    [  154.916778] 9fe0: 00000000 beaf1b68 0000d23c 4005baf0 80000010 ffffffff
    [  154.931335]  r6:ffffffff r5:80000010 r4:4005baf0 r3:beaf1f04
    [  154.937316] ---[ end trace 1b75b31a2719ed21 ]--

Cc: <stable@vger.kernel.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 86be475..8258597 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1134,7 +1134,9 @@ static int __devexit omap_i2c_remove(struct platform_device *pdev)
 
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
+	pm_runtime_get_sync(&pdev->dev);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
-- 
1.7.1

[PATCHv5 14/18] I2C: OMAP: Use SET_RUNTIME_PM_OPS

[Shubhrajyoti D]

Use SET_RUNTIME_PM_OPS macro to set runtime functions.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   11 ++++-------
 1 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 95f1b2f..a5b1ec1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1211,15 +1211,12 @@ static int omap_i2c_runtime_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static struct dev_pm_ops omap_i2c_pm_ops = {
-	.runtime_suspend = omap_i2c_runtime_suspend,
-	.runtime_resume = omap_i2c_runtime_resume,
+	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
+			   omap_i2c_runtime_resume, NULL)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
@@ -1227,7 +1224,7 @@ static struct platform_driver omap_i2c_driver = {
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
1.7.1

[PATCHv5 14/18] I2C: OMAP: Use SET_RUNTIME_PM_OPS

[Shubhrajyoti D]

Use SET_RUNTIME_PM_OPS macro to set runtime functions.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   11 ++++-------
 1 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 95f1b2f..a5b1ec1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1211,15 +1211,12 @@ static int omap_i2c_runtime_resume(struct device *dev)
 
 	return 0;
 }
+#endif
 
 static struct dev_pm_ops omap_i2c_pm_ops = {
-	.runtime_suspend = omap_i2c_runtime_suspend,
-	.runtime_resume = omap_i2c_runtime_resume,
+	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
+			   omap_i2c_runtime_resume, NULL)
 };
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif
 
 static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
@@ -1227,7 +1224,7 @@ static struct platform_driver omap_i2c_driver = {
 	.driver		= {
 		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
-		.pm	= OMAP_I2C_PM_OPS,
+		.pm	= &omap_i2c_pm_ops,
 		.of_match_table = of_match_ptr(omap_i2c_of_match),
 	},
 };
-- 
1.7.1

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Shubhrajyoti D]

From: Tasslehoff Kjappfot <tasskjapp@gmail.com>

i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again.
Move the errata handling to i2c_probe.

Signed-off-by: Tasslehoff Kjappfot <tasskjapp@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c113f41..51576d6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -431,11 +431,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	/* Take the I2C module out of reset: */
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 
-	dev->errata = 0;
-
-	if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
-		dev->errata |= I2C_OMAP_ERRATA_I207;
-
 	/* Enable interrupts */
 	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -1056,6 +1051,11 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
+	dev->errata = 0;
+
+	if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+		dev->errata |= I2C_OMAP_ERRATA_I207;
+
 	if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
 		dev->errata |= I2C_OMAP3_1P153;
 
-- 
1.7.1

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Shubhrajyoti D]

From: Tasslehoff Kjappfot <tasskjapp@gmail.com>

i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again.
Move the errata handling to i2c_probe.

Signed-off-by: Tasslehoff Kjappfot <tasskjapp@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c113f41..51576d6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -431,11 +431,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	/* Take the I2C module out of reset: */
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 
-	dev->errata = 0;
-
-	if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
-		dev->errata |= I2C_OMAP_ERRATA_I207;
-
 	/* Enable interrupts */
 	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -1056,6 +1051,11 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
+	dev->errata = 0;
+
+	if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+		dev->errata |= I2C_OMAP_ERRATA_I207;
+
 	if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
 		dev->errata |= I2C_OMAP3_1P153;
 
-- 
1.7.1

Re: [PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

Hi Shubhro,

On 04/03/2012 11:02 AM, Shubhrajyoti D wrote:
> From: Tasslehoff Kjappfot<tasskjapp-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again.
> Move the errata handling to i2c_probe.
>
> Signed-off-by: Tasslehoff Kjappfot<tasskjapp-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Shubhrajyoti D<shubhrajyoti-l0cyMroinI0@public.gmane.org>
> ---
>   drivers/i2c/busses/i2c-omap.c |   10 +++++-----
>   1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index c113f41..51576d6 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -431,11 +431,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>   	/* Take the I2C module out of reset: */
>   	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>
> -	dev->errata = 0;
> -
> -	if (dev->flags&  OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> -		dev->errata |= I2C_OMAP_ERRATA_I207;
> -
>   	/* Enable interrupts */
>   	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
>   			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
> @@ -1056,6 +1051,11 @@ omap_i2c_probe(struct platform_device *pdev)
>
>   	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG)&  0xff;
>
> +	dev->errata = 0;
> +
> +	if (dev->flags&  OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> +		dev->errata |= I2C_OMAP_ERRATA_I207;
> +
>   	if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>   		dev->errata |= I2C_OMAP3_1P153;

The errata ID is not correct. I believe that 1P153 is referring to the 
section number in the errata doc and not the errata ID. The errata ID 
should be i451 in the latest OMAP34xx and OMAP36xx docs.

Please can you update this? The section number changed in the latest 
errata docs and it took me a minute to find this.

Cheers
Jon

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

Hi Shubhro,

On 04/03/2012 11:02 AM, Shubhrajyoti D wrote:
> From: Tasslehoff Kjappfot<tasskjapp@gmail.com>
>
> i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again.
> Move the errata handling to i2c_probe.
>
> Signed-off-by: Tasslehoff Kjappfot<tasskjapp@gmail.com>
> Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com>
> ---
>   drivers/i2c/busses/i2c-omap.c |   10 +++++-----
>   1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index c113f41..51576d6 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -431,11 +431,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>   	/* Take the I2C module out of reset: */
>   	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>
> -	dev->errata = 0;
> -
> -	if (dev->flags&  OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> -		dev->errata |= I2C_OMAP_ERRATA_I207;
> -
>   	/* Enable interrupts */
>   	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
>   			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
> @@ -1056,6 +1051,11 @@ omap_i2c_probe(struct platform_device *pdev)
>
>   	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG)&  0xff;
>
> +	dev->errata = 0;
> +
> +	if (dev->flags&  OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> +		dev->errata |= I2C_OMAP_ERRATA_I207;
> +
>   	if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>   		dev->errata |= I2C_OMAP3_1P153;

The errata ID is not correct. I believe that 1P153 is referring to the 
section number in the errata doc and not the errata ID. The errata ID 
should be i451 in the latest OMAP34xx and OMAP36xx docs.

Please can you update this? The section number changed in the latest 
errata docs and it took me a minute to find this.

Cheers
Jon

Re: [PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Shubhrajyoti Datta]

Hi Jon,


>> +       if (dev->flags&  OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>
>> +               dev->errata |= I2C_OMAP_ERRATA_I207;
>> +
>>        if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>>                dev->errata |= I2C_OMAP3_1P153;
>
>
> The errata ID is not correct. I believe that 1P153 is referring to the
> section number in the errata doc and not the errata ID. The errata ID should
> be i451 in the latest OMAP34xx and OMAP36xx docs.
>
> Please can you update this? The section number changed in the latest errata
> docs and it took me a minute to find this.

Do you mind if that is a separate patch?

>
> Cheers
> Jon
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Shubhrajyoti Datta]

Hi Jon,


>> + ? ? ? if (dev->flags& ?OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>
>> + ? ? ? ? ? ? ? dev->errata |= I2C_OMAP_ERRATA_I207;
>> +
>> ? ? ? ?if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>> ? ? ? ? ? ? ? ?dev->errata |= I2C_OMAP3_1P153;
>
>
> The errata ID is not correct. I believe that 1P153 is referring to the
> section number in the errata doc and not the errata ID. The errata ID should
> be i451 in the latest OMAP34xx and OMAP36xx docs.
>
> Please can you update this? The section number changed in the latest errata
> docs and it took me a minute to find this.

Do you mind if that is a separate patch?

>
> Cheers
> Jon
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html

Re: [PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

Hi Shubhro,

On 04/04/2012 12:45 PM, Shubhrajyoti Datta wrote:
> Hi Jon,
>
>
>>> +       if (dev->flags&    OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>>
>>> +               dev->errata |= I2C_OMAP_ERRATA_I207;
>>> +
>>>         if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>>>                 dev->errata |= I2C_OMAP3_1P153;
>>
>>
>> The errata ID is not correct. I believe that 1P153 is referring to the
>> section number in the errata doc and not the errata ID. The errata ID should
>> be i451 in the latest OMAP34xx and OMAP36xx docs.
>>
>> Please can you update this? The section number changed in the latest errata
>> docs and it took me a minute to find this.
>
> Do you mind if that is a separate patch?

Not at all and in fact it probably should be.

Thanks
Jon

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

Hi Shubhro,

On 04/04/2012 12:45 PM, Shubhrajyoti Datta wrote:
> Hi Jon,
>
>
>>> +       if (dev->flags&    OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>>
>>> +               dev->errata |= I2C_OMAP_ERRATA_I207;
>>> +
>>>         if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>>>                 dev->errata |= I2C_OMAP3_1P153;
>>
>>
>> The errata ID is not correct. I believe that 1P153 is referring to the
>> section number in the errata doc and not the errata ID. The errata ID should
>> be i451 in the latest OMAP34xx and OMAP36xx docs.
>>
>> Please can you update this? The section number changed in the latest errata
>> docs and it took me a minute to find this.
>
> Do you mind if that is a separate patch?

Not at all and in fact it probably should be.

Thanks
Jon

Re: [PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

On 04/04/2012 02:22 PM, Jon Hunter wrote:
> Hi Shubhro,
>
> On 04/04/2012 12:45 PM, Shubhrajyoti Datta wrote:
>> Hi Jon,
>>
>>
>>>> + if (dev->flags& OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>>>
>>>> + dev->errata |= I2C_OMAP_ERRATA_I207;
>>>> +
>>>> if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>>>> dev->errata |= I2C_OMAP3_1P153;
>>>
>>>
>>> The errata ID is not correct. I believe that 1P153 is referring to the
>>> section number in the errata doc and not the errata ID. The errata ID
>>> should
>>> be i451 in the latest OMAP34xx and OMAP36xx docs.
>>>
>>> Please can you update this? The section number changed in the latest
>>> errata
>>> docs and it took me a minute to find this.
>>
>> Do you mind if that is a separate patch?
>
> Not at all and in fact it probably should be.

Sorry the erratum ID is not i451 but i462!

Cheers
Jon

[PATCHv5 16/18] I2C: OMAP: fix missing handling of errata I2C_OMAP3_1P153

[Jon Hunter]

On 04/04/2012 02:22 PM, Jon Hunter wrote:
> Hi Shubhro,
>
> On 04/04/2012 12:45 PM, Shubhrajyoti Datta wrote:
>> Hi Jon,
>>
>>
>>>> + if (dev->flags& OMAP_I2C_FLAG_APPLY_ERRATA_I207)
>>>>
>>>> + dev->errata |= I2C_OMAP_ERRATA_I207;
>>>> +
>>>> if (dev->rev<= OMAP_I2C_REV_ON_3430_3530)
>>>> dev->errata |= I2C_OMAP3_1P153;
>>>
>>>
>>> The errata ID is not correct. I believe that 1P153 is referring to the
>>> section number in the errata doc and not the errata ID. The errata ID
>>> should
>>> be i451 in the latest OMAP34xx and OMAP36xx docs.
>>>
>>> Please can you update this? The section number changed in the latest
>>> errata
>>> docs and it took me a minute to find this.
>>
>> Do you mind if that is a separate patch?
>
> Not at all and in fact it probably should be.

Sorry the erratum ID is not i451 but i462!

Cheers
Jon

[PATCHv5 18/18] ARM: OMAP4: hwmod data: I2C: add flag for context restore

[Shubhrajyoti D]

Restore of context is not done for OMAP4. This patch
adds the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE in the OMAP4
hwmod data which activates the restore for OMAP4.
Currently the OMAP4 does not hit device off still the
driver may have support for it.

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Wamsley <paul@pwsan.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 08daa5e..cddce60 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2262,7 +2262,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+			OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
 };
 
 /* i2c1 */
-- 
1.7.1

[PATCHv5 18/18] ARM: OMAP4: hwmod data: I2C: add flag for context restore

[Shubhrajyoti D]

Restore of context is not done for OMAP4. This patch
adds the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE in the OMAP4
hwmod data which activates the restore for OMAP4.
Currently the OMAP4 does not hit device off still the
driver may have support for it.

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Wamsley <paul@pwsan.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 08daa5e..cddce60 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2262,7 +2262,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+			OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
 };
 
 /* i2c1 */
-- 
1.7.1