From: "Cousson, Benoit" <b-cousson@ti.com>
To: R Sricharan <r.sricharan@ti.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
santosh.shilimkar@ti.com, tony@atomide.com
Subject: Re: [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.
Date: Mon, 7 May 2012 15:27:29 +0200 [thread overview]
Message-ID: <4FA7CDC1.9050301@ti.com> (raw)
In-Reply-To: <1336029982-31898-11-git-send-email-r.sricharan@ti.com>
Hi Sricharan,
On 5/3/2012 9:26 AM, R Sricharan wrote:
> Adding the minimal support for OMAP5 soc with device tree.
You should probably split that patch since you are doing several things
that are not OMAP5 related.
Do a patch that move the omap_init_irq into the INTC and GIC code first.
Then, you can add a patch to add the OMAP5_DT machine entry.
> Signed-off-by: R Sricharan<r.sricharan@ti.com>
> ---
> arch/arm/mach-omap2/board-generic.c | 39 +++++++++++++++++++++-------------
> arch/arm/mach-omap2/common.h | 2 +
> arch/arm/mach-omap2/irq.c | 11 +++++++++
> arch/arm/mach-omap2/omap4-common.c | 14 ++++++++++++
> 4 files changed, 51 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 098d183..0dd9e3f 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -20,6 +20,7 @@
> #include<mach/hardware.h>
> #include<asm/hardware/gic.h>
> #include<asm/mach/arch.h>
> +#include<mach/omap-wakeupgen.h>
>
> #include<plat/board.h>
> #include "common.h"
> @@ -32,17 +33,6 @@
> #define gic_of_init NULL
> #endif
>
> -static struct of_device_id irq_match[] __initdata = {
> - { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
> - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
> - { }
> -};
> -
> -static void __init omap_init_irq(void)
> -{
> - of_irq_init(irq_match);
> -}
> -
> static struct of_device_id omap_dt_match_table[] __initdata = {
> { .compatible = "simple-bus", },
> { .compatible = "ti,omap-infra", },
> @@ -66,7 +56,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap242x_map_io,
> .init_early = omap2420_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap2_intc_handle_irq,
> .init_machine = omap_generic_init,
> .timer =&omap2_timer,
> @@ -85,7 +75,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap243x_map_io,
> .init_early = omap2430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap2_intc_handle_irq,
> .init_machine = omap_generic_init,
> .timer =&omap2_timer,
> @@ -120,7 +110,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap3_map_io,
> .init_early = omap3430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap3_intc_handle_irq,
> .init_machine = omap3_init,
> .timer =&omap3_timer,
> @@ -155,7 +145,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap4_map_io,
> .init_early = omap4430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_gic_of_init,
> .handle_irq = gic_handle_irq,
> .init_machine = omap4_init,
> .timer =&omap4_timer,
> @@ -163,3 +153,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
> .restart = omap_prcm_restart,
> MACHINE_END
> #endif
> +
> +#ifdef CONFIG_ARCH_OMAP5
> +static const char *omap5_boards_compat[] __initdata = {
> + "ti,omap5",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap5_map_io,
> + .init_early = omap5_init_early,
> + .init_irq = omap_gic_of_init,
> + .handle_irq = gic_handle_irq,
> + .init_machine = omap_generic_init,
> + .timer =&omap5_timer,
> + .dt_compat = omap5_boards_compat,
> + .restart = omap_prcm_restart,
> +MACHINE_END
> +#endif
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 0771d22..e66859d 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -185,6 +185,8 @@ void omap3_intc_prepare_idle(void);
> void omap3_intc_resume_idle(void);
> void omap2_intc_handle_irq(struct pt_regs *regs);
> void omap3_intc_handle_irq(struct pt_regs *regs);
> +void omap_of_init_irq(void);
In order to be consistent with the GIC function and even the previous
ones, you should name the exported one:
+void omap_intc_of_init(void);
> +void omap_gic_of_init(void);
>
> #ifdef CONFIG_CACHE_L2X0
> extern void __iomem *omap4_get_l2cache_base(void);
> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
> index 65f0d25..d316c68 100644
> --- a/arch/arm/mach-omap2/irq.c
> +++ b/arch/arm/mach-omap2/irq.c
> @@ -21,6 +21,7 @@
> #include<linux/irqdomain.h>
> #include<linux/of.h>
> #include<linux/of_address.h>
> +#include<linux/of_irq.h>
>
> #include<mach/hardware.h>
>
> @@ -279,6 +280,16 @@ int __init omap_intc_of_init(struct device_node *node,
And thus rename that one that become a private function without the
omap_ prefix.
> return 0;
> }
>
> +static struct of_device_id irq_match[] __initdata = {
> + { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
+ { .compatible = "ti,omap2-intc", .data = intc_of_init, },
> + { }
> +};
> +
> +void __init omap_of_init_irq(void)
+void __init omap_intc_of_init(void)
> +{
> + of_irq_init(irq_match);
> +}
Regards,
Benoit
WARNING: multiple messages have this Message-ID (diff)
From: b-cousson@ti.com (Cousson, Benoit)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support.
Date: Mon, 7 May 2012 15:27:29 +0200 [thread overview]
Message-ID: <4FA7CDC1.9050301@ti.com> (raw)
In-Reply-To: <1336029982-31898-11-git-send-email-r.sricharan@ti.com>
Hi Sricharan,
On 5/3/2012 9:26 AM, R Sricharan wrote:
> Adding the minimal support for OMAP5 soc with device tree.
You should probably split that patch since you are doing several things
that are not OMAP5 related.
Do a patch that move the omap_init_irq into the INTC and GIC code first.
Then, you can add a patch to add the OMAP5_DT machine entry.
> Signed-off-by: R Sricharan<r.sricharan@ti.com>
> ---
> arch/arm/mach-omap2/board-generic.c | 39 +++++++++++++++++++++-------------
> arch/arm/mach-omap2/common.h | 2 +
> arch/arm/mach-omap2/irq.c | 11 +++++++++
> arch/arm/mach-omap2/omap4-common.c | 14 ++++++++++++
> 4 files changed, 51 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 098d183..0dd9e3f 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -20,6 +20,7 @@
> #include<mach/hardware.h>
> #include<asm/hardware/gic.h>
> #include<asm/mach/arch.h>
> +#include<mach/omap-wakeupgen.h>
>
> #include<plat/board.h>
> #include "common.h"
> @@ -32,17 +33,6 @@
> #define gic_of_init NULL
> #endif
>
> -static struct of_device_id irq_match[] __initdata = {
> - { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
> - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
> - { }
> -};
> -
> -static void __init omap_init_irq(void)
> -{
> - of_irq_init(irq_match);
> -}
> -
> static struct of_device_id omap_dt_match_table[] __initdata = {
> { .compatible = "simple-bus", },
> { .compatible = "ti,omap-infra", },
> @@ -66,7 +56,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap242x_map_io,
> .init_early = omap2420_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap2_intc_handle_irq,
> .init_machine = omap_generic_init,
> .timer =&omap2_timer,
> @@ -85,7 +75,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap243x_map_io,
> .init_early = omap2430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap2_intc_handle_irq,
> .init_machine = omap_generic_init,
> .timer =&omap2_timer,
> @@ -120,7 +110,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap3_map_io,
> .init_early = omap3430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_of_init_irq,
> .handle_irq = omap3_intc_handle_irq,
> .init_machine = omap3_init,
> .timer =&omap3_timer,
> @@ -155,7 +145,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
> .reserve = omap_reserve,
> .map_io = omap4_map_io,
> .init_early = omap4430_init_early,
> - .init_irq = omap_init_irq,
> + .init_irq = omap_gic_of_init,
> .handle_irq = gic_handle_irq,
> .init_machine = omap4_init,
> .timer =&omap4_timer,
> @@ -163,3 +153,22 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
> .restart = omap_prcm_restart,
> MACHINE_END
> #endif
> +
> +#ifdef CONFIG_ARCH_OMAP5
> +static const char *omap5_boards_compat[] __initdata = {
> + "ti,omap5",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap5_map_io,
> + .init_early = omap5_init_early,
> + .init_irq = omap_gic_of_init,
> + .handle_irq = gic_handle_irq,
> + .init_machine = omap_generic_init,
> + .timer =&omap5_timer,
> + .dt_compat = omap5_boards_compat,
> + .restart = omap_prcm_restart,
> +MACHINE_END
> +#endif
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 0771d22..e66859d 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -185,6 +185,8 @@ void omap3_intc_prepare_idle(void);
> void omap3_intc_resume_idle(void);
> void omap2_intc_handle_irq(struct pt_regs *regs);
> void omap3_intc_handle_irq(struct pt_regs *regs);
> +void omap_of_init_irq(void);
In order to be consistent with the GIC function and even the previous
ones, you should name the exported one:
+void omap_intc_of_init(void);
> +void omap_gic_of_init(void);
>
> #ifdef CONFIG_CACHE_L2X0
> extern void __iomem *omap4_get_l2cache_base(void);
> diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
> index 65f0d25..d316c68 100644
> --- a/arch/arm/mach-omap2/irq.c
> +++ b/arch/arm/mach-omap2/irq.c
> @@ -21,6 +21,7 @@
> #include<linux/irqdomain.h>
> #include<linux/of.h>
> #include<linux/of_address.h>
> +#include<linux/of_irq.h>
>
> #include<mach/hardware.h>
>
> @@ -279,6 +280,16 @@ int __init omap_intc_of_init(struct device_node *node,
And thus rename that one that become a private function without the
omap_ prefix.
> return 0;
> }
>
> +static struct of_device_id irq_match[] __initdata = {
> + { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
+ { .compatible = "ti,omap2-intc", .data = intc_of_init, },
> + { }
> +};
> +
> +void __init omap_of_init_irq(void)
+void __init omap_intc_of_init(void)
> +{
> + of_irq_init(irq_match);
> +}
Regards,
Benoit
next prev parent reply other threads:[~2012-05-07 13:27 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-03 7:26 [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 01/13] ARM: OMAP5: id: Add cpu id for ES versions R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-10 11:18 ` Roger Quadros
2012-05-10 11:18 ` Roger Quadros
2012-05-10 11:22 ` R, Sricharan
2012-05-10 11:22 ` R, Sricharan
2012-05-10 13:06 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-10 13:06 ` Jean-Christophe PLAGNIOL-VILLARD
2012-05-10 13:15 ` R, Sricharan
2012-05-10 13:15 ` R, Sricharan
2012-05-03 7:26 ` [PATCH 02/13] ARM: OMAP5: Add minimal support for OMAP5430 SOC R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-04 22:39 ` Tony Lindgren
2012-05-04 22:39 ` Tony Lindgren
2012-05-04 22:47 ` Tony Lindgren
2012-05-04 22:47 ` Tony Lindgren
2012-05-06 7:36 ` R, Sricharan
2012-05-06 7:36 ` R, Sricharan
2012-05-07 17:33 ` Tony Lindgren
2012-05-07 17:33 ` Tony Lindgren
2012-05-09 9:06 ` R, Sricharan
2012-05-09 9:06 ` R, Sricharan
2012-05-09 16:00 ` Tony Lindgren
2012-05-09 16:00 ` Tony Lindgren
2012-05-10 9:49 ` R, Sricharan
2012-05-10 9:49 ` R, Sricharan
2012-05-07 19:07 ` Paul Walmsley
2012-05-07 19:07 ` Paul Walmsley
2012-05-07 19:18 ` Tony Lindgren
2012-05-07 19:18 ` Tony Lindgren
2012-05-07 19:35 ` Tony Lindgren
2012-05-07 19:35 ` Tony Lindgren
2012-05-08 5:32 ` Paul Walmsley
2012-05-08 5:32 ` Paul Walmsley
2012-05-08 5:49 ` Hiremath, Vaibhav
2012-05-08 5:49 ` Hiremath, Vaibhav
2012-05-08 15:48 ` Tony Lindgren
2012-05-08 15:48 ` Tony Lindgren
2012-05-08 17:00 ` Hiremath, Vaibhav
2012-05-08 17:00 ` Hiremath, Vaibhav
2012-05-08 19:07 ` Tony Lindgren
2012-05-08 19:07 ` Tony Lindgren
2012-05-08 5:31 ` Paul Walmsley
2012-05-08 5:31 ` Paul Walmsley
2012-05-08 15:47 ` Tony Lindgren
2012-05-08 15:47 ` Tony Lindgren
2012-05-10 11:58 ` Roger Quadros
2012-05-10 11:58 ` Roger Quadros
2012-05-03 7:26 ` [PATCH 03/13] TEMP: ARM: OMAP5: Add cpu_is_omap54xx() checks R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 04/13] ARM: OMAP5: timer: Add clocksource, clockevent support R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 05/13] TEMP: ARM: OMAP5: Update the base address of the 32k-counter R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 06/13] ARM: OMAP5: gpmc: Update gpmc_init() R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 07/13] ARM: OMAP5: l3: Add l3 error handler support for omap5 R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-04 22:51 ` Tony Lindgren
2012-05-04 22:51 ` Tony Lindgren
2012-05-06 7:38 ` R, Sricharan
2012-05-06 7:38 ` R, Sricharan
2012-05-07 17:34 ` Tony Lindgren
2012-05-07 17:34 ` Tony Lindgren
2012-05-08 6:04 ` R, Sricharan
2012-05-08 6:04 ` R, Sricharan
2012-05-03 7:26 ` [PATCH 08/13] ARM: OMAP5: Add the WakeupGen IP updates R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-04 22:55 ` Tony Lindgren
2012-05-04 22:55 ` Tony Lindgren
2012-05-07 9:06 ` Santosh Shilimkar
2012-05-07 9:06 ` Santosh Shilimkar
2012-05-10 11:36 ` Roger Quadros
2012-05-10 11:36 ` Roger Quadros
2012-05-10 11:42 ` Shilimkar, Santosh
2012-05-10 11:42 ` Shilimkar, Santosh
2012-05-10 11:48 ` Roger Quadros
2012-05-10 11:48 ` Roger Quadros
2012-05-10 11:52 ` Santosh Shilimkar
2012-05-10 11:52 ` Santosh Shilimkar
2012-05-03 7:26 ` [PATCH 09/13] ARM: OMAP5: Add SMP support R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-08 12:47 ` Will Deacon
2012-05-08 12:47 ` Will Deacon
2012-05-08 13:00 ` Santosh Shilimkar
2012-05-08 13:00 ` Santosh Shilimkar
2012-05-03 7:26 ` [PATCH 10/13] ARM: OMAP5: board-generic: Add device tree support R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-07 13:27 ` Cousson, Benoit [this message]
2012-05-07 13:27 ` Cousson, Benoit
2012-05-07 14:08 ` R, Sricharan
2012-05-07 14:08 ` R, Sricharan
2012-05-07 17:35 ` Tony Lindgren
2012-05-07 17:35 ` Tony Lindgren
2012-05-03 7:26 ` [PATCH 11/13] arm/dts: OMAP5: Add omap5 dts files R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-03 7:26 ` [PATCH 12/13] ARM: OMAP5: Add the build support R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-04 22:58 ` Tony Lindgren
2012-05-04 22:58 ` Tony Lindgren
2012-05-07 3:35 ` R, Sricharan
2012-05-07 3:35 ` R, Sricharan
2012-05-07 17:37 ` Tony Lindgren
2012-05-07 17:37 ` Tony Lindgren
2012-05-08 9:19 ` Cousson, Benoit
2012-05-08 9:19 ` Cousson, Benoit
2012-05-08 15:57 ` Tony Lindgren
2012-05-08 15:57 ` Tony Lindgren
2012-05-03 7:26 ` [PATCH 13/13] ARM: Kconfig update to support additional GPIOs in OMAP5 R Sricharan
2012-05-03 7:26 ` R Sricharan
2012-05-07 9:49 ` [PATCH 00/13] ARM: OMAP5: Add minimal OMAP5 SOC support Santosh Shilimkar
2012-05-07 9:49 ` Santosh Shilimkar
2012-05-07 22:26 ` Tony Lindgren
2012-05-07 22:26 ` Tony Lindgren
2012-05-08 7:24 ` Santosh Shilimkar
2012-05-08 7:24 ` Santosh Shilimkar
2012-05-08 15:58 ` Tony Lindgren
2012-05-08 15:58 ` Tony Lindgren
2012-05-10 17:43 ` Sricharan R
2012-05-10 17:43 ` Sricharan R
2012-05-11 20:11 ` Tony Lindgren
2012-05-11 20:11 ` Tony Lindgren
2012-05-14 4:50 ` R, Sricharan
2012-05-14 4:50 ` R, Sricharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA7CDC1.9050301@ti.com \
--to=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=r.sricharan@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.