From: Xiao Jiang <jgq516@gmail.com>
To: Jon Hunter <jon-hunter@ti.com>
Cc: linux@arm.linux.org.uk, b-cousson@ti.com,
rob.herring@calxeda.com, grant.likely@secretlab.ca,
rnayak@ti.com, tony@atomide.com, wim@iguana.be,
devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-watchdog@vger.kernel.org
Subject: Re: [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4
Date: Wed, 30 May 2012 11:19:37 +0800 [thread overview]
Message-ID: <4FC591C9.2050004@gmail.com> (raw)
In-Reply-To: <4FC50CCD.7090404@ti.com>
Jon Hunter wrote:
> On 05/25/2012 05:42 AM, jgq516@gmail.com wrote:
>
>> From: Xiao Jiang <jgq516@gmail.com>
>>
>> Add wdt node to support dt.
>>
>> Signed-off-by: Xiao Jiang <jgq516@gmail.com>
>> ---
>> arch/arm/boot/dts/omap3.dtsi | 5 +++++
>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
>> 2 files changed, 10 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>> index 99474fa..039df5c 100644
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -215,5 +215,10 @@
>> compatible = "ti,omap3-hsmmc";
>> ti,hwmods = "mmc3";
>> };
>> +
>> + wdt: wdt@48314000{
>>
>
> Minor comment, may be call this wdt2 as this is watchdog timer 2. Also
> ass a space between the address and the "{".
>
>
Ok, will change it to "wdt2: wdt@48314000 {".
>> + compatible = "ti,omap3-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 359c497..d01403d 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -272,5 +272,10 @@
>> ti,hwmods = "mmc5";
>> ti,needs-special-reset;
>> };
>> +
>> + wdt: wdt@4a314000{
>>
>
> Same as above.
>
>
Ditto.
>> + compatible = "ti,omap4-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>>
>
> Also we should add some documentation to describe the binding. Here it
> is very simple, but nonetheless we should have something as we have for
> gpio [1].
>
>
Thanks for reminding, how about below patch?
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000..4272d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,15 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+- compatible:
+ - "ti,omap2-wdt" for OMAP2
+ - "ti,omap3-wdt" for OMAP3
+ - "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt@73f98000 {
+ compatible = "ti,omap4-wdt";
+ ti,hwmods = "wd_timer2";
+};
Regards,
Xiao
> Cheers
> Jon
>
> [1]
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/devicetree/bindings/gpio/gpio-omap.txt;h=bff51a2fee1eae7d387b40ea913e04782554bf68;hb=HEAD
>
WARNING: multiple messages have this Message-ID (diff)
From: jgq516@gmail.com (Xiao Jiang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4
Date: Wed, 30 May 2012 11:19:37 +0800 [thread overview]
Message-ID: <4FC591C9.2050004@gmail.com> (raw)
In-Reply-To: <4FC50CCD.7090404@ti.com>
Jon Hunter wrote:
> On 05/25/2012 05:42 AM, jgq516 at gmail.com wrote:
>
>> From: Xiao Jiang <jgq516@gmail.com>
>>
>> Add wdt node to support dt.
>>
>> Signed-off-by: Xiao Jiang <jgq516@gmail.com>
>> ---
>> arch/arm/boot/dts/omap3.dtsi | 5 +++++
>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
>> 2 files changed, 10 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>> index 99474fa..039df5c 100644
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -215,5 +215,10 @@
>> compatible = "ti,omap3-hsmmc";
>> ti,hwmods = "mmc3";
>> };
>> +
>> + wdt: wdt at 48314000{
>>
>
> Minor comment, may be call this wdt2 as this is watchdog timer 2. Also
> ass a space between the address and the "{".
>
>
Ok, will change it to "wdt2: wdt at 48314000 {".
>> + compatible = "ti,omap3-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 359c497..d01403d 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -272,5 +272,10 @@
>> ti,hwmods = "mmc5";
>> ti,needs-special-reset;
>> };
>> +
>> + wdt: wdt at 4a314000{
>>
>
> Same as above.
>
>
Ditto.
>> + compatible = "ti,omap4-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>>
>
> Also we should add some documentation to describe the binding. Here it
> is very simple, but nonetheless we should have something as we have for
> gpio [1].
>
>
Thanks for reminding, how about below patch?
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000..4272d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,15 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+- compatible:
+ - "ti,omap2-wdt" for OMAP2
+ - "ti,omap3-wdt" for OMAP3
+ - "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt at 73f98000 {
+ compatible = "ti,omap4-wdt";
+ ti,hwmods = "wd_timer2";
+};
Regards,
Xiao
> Cheers
> Jon
>
> [1]
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/devicetree/bindings/gpio/gpio-omap.txt;h=bff51a2fee1eae7d387b40ea913e04782554bf68;hb=HEAD
>
next prev parent reply other threads:[~2012-05-30 3:19 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 10:42 [PATCH 0/3] omap3/omap4: add device tree support for wdt jgq516
2012-05-25 10:42 ` jgq516 at gmail.com
2012-05-25 10:42 ` jgq516
2012-05-25 10:42 ` [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4 jgq516
2012-05-25 10:42 ` jgq516 at gmail.com
2012-05-25 10:42 ` jgq516
2012-05-29 17:52 ` Jon Hunter
2012-05-29 17:52 ` Jon Hunter
2012-05-29 17:52 ` Jon Hunter
2012-05-30 3:19 ` Xiao Jiang [this message]
2012-05-30 3:19 ` Xiao Jiang
2012-05-30 14:42 ` Jon Hunter
2012-05-30 14:42 ` Jon Hunter
2012-05-30 14:42 ` Jon Hunter
2012-05-31 5:51 ` Xiao Jiang
2012-05-31 5:51 ` Xiao Jiang
2012-05-31 5:51 ` Xiao Jiang
2012-05-31 14:55 ` Jon Hunter
2012-05-31 14:55 ` Jon Hunter
2012-05-31 14:55 ` Jon Hunter
2012-05-31 20:59 ` Cousson, Benoit
2012-05-31 20:59 ` Cousson, Benoit
2012-05-31 20:59 ` Cousson, Benoit
2012-05-25 10:42 ` [PATCH 2/3] OMAP: avoid build wdt platform device if with dt support jgq516
2012-05-25 10:42 ` jgq516 at gmail.com
2012-05-25 10:42 ` jgq516
2012-05-29 17:53 ` Jon Hunter
2012-05-29 17:53 ` Jon Hunter
2012-05-29 17:53 ` Jon Hunter
2012-05-25 10:42 ` [PATCH 3/3] watchdog: omap_wdt: add device tree support jgq516
2012-05-25 10:42 ` jgq516 at gmail.com
2012-05-25 10:42 ` jgq516
2012-05-29 18:06 ` Jon Hunter
2012-05-29 18:06 ` Jon Hunter
2012-05-29 18:06 ` Jon Hunter
2012-05-30 3:18 ` Xiao Jiang
2012-05-30 3:18 ` Xiao Jiang
2012-05-30 7:54 ` Cousson, Benoit
2012-05-30 7:54 ` Cousson, Benoit
2012-05-30 7:54 ` Cousson, Benoit
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:31 ` Xiao Jiang
2012-05-30 10:31 ` Xiao Jiang
2012-05-30 15:03 ` Jon Hunter
2012-05-30 15:03 ` Jon Hunter
2012-05-30 15:03 ` Jon Hunter
2012-05-30 15:30 ` Cousson, Benoit
2012-05-30 15:30 ` Cousson, Benoit
2012-05-30 15:30 ` Cousson, Benoit
2012-05-30 16:12 ` Jon Hunter
2012-05-30 16:12 ` Jon Hunter
2012-05-30 16:12 ` Jon Hunter
2012-05-29 17:47 ` [PATCH 0/3] omap3/omap4: add device tree support for wdt Jon Hunter
2012-05-29 17:47 ` Jon Hunter
2012-05-29 17:47 ` Jon Hunter
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:14 ` Xiao Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC591C9.2050004@gmail.com \
--to=jgq516@gmail.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=jon-hunter@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rnayak@ti.com \
--cc=rob.herring@calxeda.com \
--cc=tony@atomide.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.