From: "Prchal Jiří" <jiri.prchal@aksignal.cz>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: vbarinov@embeddedalley.com, alsa-devel@alsa-project.org,
sudhakar.raj@ti.com, nsekhar@ti.com, peter.ujfalusi@ti.com,
mr.swami.reddy@ti.com, lrg@ti.com
Subject: [PATCH] ASoC: tlv320aic3x: add missing registers and bits
Date: Tue, 03 Jul 2012 11:41:43 +0200 [thread overview]
Message-ID: <4FF2BE57.3050602@aksignal.cz> (raw)
In-Reply-To: <20120627120130.GJ308@opensource.wolfsonmicro.com>
Adds missing register default values to cache.
Adds register and bit shift definitions in header file.
Changes are for TLV320AIC310x based on data sheet.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
sound/soc/codecs/tlv320aic3x.c | 4 +++-
sound/soc/codecs/tlv320aic3x.h | 19 ++++++++++++++++++-
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 7a49390..bd03f4d 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -119,7 +119,9 @@ static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = {
0x00, 0x00, 0x00, 0x00, /* 88 */
0x00, 0x00, 0x00, 0x00, /* 92 */
0x00, 0x00, 0x00, 0x00, /* 96 */
- 0x00, 0x00, 0x02, /* 100 */
+ 0x00, 0x00, 0x02, 0x00, /* 100 */
+ 0x00, 0x00, 0x00, 0x00, /* 104 */
+ 0x00, 0x00, /* 108 */
};
/*
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 06a1978..586c5d5 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -13,7 +13,7 @@
#define _AIC3X_H
/* AIC3X register space */
-#define AIC3X_CACHEREGNUM 103
+#define AIC3X_CACHEREGNUM 110
/* Page select register */
#define AIC3X_PAGE_SELECT 0
@@ -74,6 +74,8 @@
#define HPLCOM_CFG 37
/* Right High Power Output control registers */
#define HPRCOM_CFG 38
+/* High Power Output Stage Control Register */
+#define HPOUT_SC 40
/* DAC Output Switching control registers */
#define DAC_LINE_MUX 41
/* High Power Output Driver Pop Reduction registers */
@@ -148,6 +150,17 @@
#define AIC3X_GPIOB_REG 101
/* Clock generation control register */
#define AIC3X_CLKGEN_CTRL_REG 102
+/* New AGC registers */
+#define LAGCN_ATTACK 103
+#define LAGCN_DECAY 104
+#define RAGCN_ATTACK 105
+#define RAGCN_DECAY 106
+/* New Programmable ADC Digital Path and I2C Bus Condition Register */
+#define NEW_ADC_DIGITALPATH 107
+/* Passive Analog Signal Bypass Selection During Powerdown Register */
+#define PASSIVE_BYPASS 108
+/* DAC Quiescent Current Adjustment Register */
+#define DAC_ICC_ADJ 109
/* Page select register bits */
#define PAGE0_SELECT 0
@@ -163,6 +176,10 @@
#define DUAL_RATE_MODE ((1 << 5) | (1 << 6))
#define LDAC2LCH (0x1 << 3)
#define RDAC2RCH (0x1 << 1)
+#define LDAC2RCH (0x2 << 3)
+#define RDAC2LCH (0x2 << 1)
+#define LDAC2MONOMIX (0x3 << 3)
+#define RDAC2MONOMIX (0x3 << 1)
/* PLL registers bitfields */
#define PLLP_SHIFT 0
--
1.7.7
next prev parent reply other threads:[~2012-07-03 9:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-27 6:06 [PATCH v2] ASoC: tlv320aic3x: add missing registers and bits Prchal Jiří
2012-06-27 12:01 ` Mark Brown
2012-06-27 13:01 ` [PATCH v3] " Prchal Jiří
2012-07-01 18:31 ` Mark Brown
2012-07-03 9:41 ` Prchal Jiří [this message]
2012-07-03 18:53 ` [PATCH] " Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2012-06-26 12:38 Prchal Jiří
2012-06-26 13:21 ` Mark Brown
2012-06-26 14:56 ` Roberto Nibali
2012-06-26 16:33 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF2BE57.3050602@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=mr.swami.reddy@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=sudhakar.raj@ti.com \
--cc=vbarinov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.