From: Vaibhav Hiremath <hvaibhav@ti.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: tony@atomide.com, linux-arm-kernel@lists.infradead.org,
linux-omap@vger.kernel.org, R Sricharan <r.sricharan@ti.com>
Subject: Re: [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC
Date: Mon, 9 Jul 2012 14:20:41 +0530 [thread overview]
Message-ID: <4FFA9B61.8030808@ti.com> (raw)
In-Reply-To: <1341566515-22665-5-git-send-email-santosh.shilimkar@ti.com>
On 7/6/2012 2:51 PM, Santosh Shilimkar wrote:
> From: R Sricharan <r.sricharan@ti.com>
>
> OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP
> architecture. It's a dual core SOC with GIC used for interrupt
> handling and with an integrated L2 cache controller.
>
> OMAP5432 is another variant of OMAP5430, with a
> memory controller supporting DDR3 and SATA.
>
> Patch includes:
> - The machine specific headers and sources updates.
> - Platform header updates.
> - Minimum initialisation support for serial.
> - IO table init
>
> Signed-off-by: R Sricharan <r.sricharan@ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> arch/arm/mach-omap2/Makefile | 23 ++++++++++---
> arch/arm/mach-omap2/common.c | 24 +++++++++++++
> arch/arm/mach-omap2/common.h | 11 ++++++
> arch/arm/mach-omap2/include/mach/debug-macro.S | 8 ++---
> arch/arm/mach-omap2/io.c | 44 ++++++++++++++++++++++++
> arch/arm/mach-omap2/iomap.h | 27 +++++++++++++++
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/prcm-common.h | 2 +-
> arch/arm/mach-omap2/prcm.c | 2 +-
> arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
> arch/arm/plat-omap/include/plat/clock.h | 1 +
> arch/arm/plat-omap/include/plat/hardware.h | 1 +
> arch/arm/plat-omap/include/plat/multi.h | 9 +++++
> arch/arm/plat-omap/include/plat/omap54xx.h | 32 +++++++++++++++++
> arch/arm/plat-omap/include/plat/serial.h | 10 ++++++
> arch/arm/plat-omap/include/plat/uncompress.h | 6 ++++
> arch/arm/plat-omap/sram.c | 11 ++++--
> 17 files changed, 200 insertions(+), 14 deletions(-)
> create mode 100644 arch/arm/plat-omap/include/plat/omap54xx.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 240f196..085e171 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
> obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
> obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
> obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
> +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
>
> ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
> obj-y += mcbsp.o
> @@ -29,8 +30,10 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
>
> obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
> obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
> -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
> -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
> +omap-4-5-common = omap4-common.o omap-wakeupgen.o \
> + sleep44xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
> +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
>
> plus_sec := $(call as-instr,.arch_extension sec,+sec)
> AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
> @@ -70,6 +73,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
> obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
> obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
> obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
> +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
> obj-$(CONFIG_PM_DEBUG) += pm-debug.o
> obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
> @@ -85,14 +89,16 @@ endif
> endif
>
> # PRCM
> +omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
> + prcm_mpu44xx.o prminst44xx.o \
> + vc44xx_data.o vp44xx_data.o
> obj-y += prm_common.o
> obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
> obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
> +obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
>
> # OMAP voltage domains
> voltagedomain-common := voltage.o vc.o vp.o
> @@ -104,6 +110,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
> obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
> obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
>
> # OMAP powerdomain framework
> powerdomain-common += powerdomain.o powerdomain-common.o
> @@ -121,6 +128,8 @@ obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
> obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
> obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
> +obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
>
> # PRCM clockdomain control
> clockdomain-common += clockdomain.o
> @@ -139,6 +148,8 @@ obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
> obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
> obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
> +obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
>
> # Clock framework
> obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
> @@ -157,6 +168,8 @@ obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
> obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
> obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
> +obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
> +obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
>
> # OMAP2 clock rate set data (old "OPP" data)
> obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
> diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
> index 73d2a0b..069f972 100644
> --- a/arch/arm/mach-omap2/common.c
> +++ b/arch/arm/mach-omap2/common.c
> @@ -178,3 +178,27 @@ void __init omap4_map_io(void)
> }
> #endif
>
> +#if defined(CONFIG_SOC_OMAP5)
> +static struct omap_globals omap5_globals = {
> + .class = OMAP54XX_CLASS,
> + .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
> + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
> + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
> + .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
> + .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
> + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
> + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
I am not sure whether we had discussed on this before, couldn't find it.
Why don't we reuse OMAP4 data here and elsewhere??
> +};
> +
> +void __init omap2_set_globals_5xxx(void)
> +{
> + omap2_set_globals_tap(&omap5_globals);
> + omap2_set_globals_control(&omap5_globals);
> + omap2_set_globals_prcm(&omap5_globals);
> +}
> +
> +void __init omap5_map_io(void)
> +{
> + omap5_map_common_io();
> +}
> +#endif
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 404f172..399e5bb 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -115,6 +115,14 @@ static inline int omap_mux_late_init(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +extern void omap5_map_common_io(void);
> +#else
> +static inline void omap5_map_common_io(void)
> +{
> +}
> +#endif
> +
> extern void omap2_init_common_infrastructure(void);
>
> extern struct sys_timer omap2_timer;
> @@ -134,6 +142,7 @@ void am35xx_init_early(void);
> void ti81xx_init_early(void);
> void am33xx_init_early(void);
> void omap4430_init_early(void);
> +void omap5_init_early(void);
> void omap3_init_late(void); /* Do not use this one */
> void omap4430_init_late(void);
> void omap2420_init_late(void);
> @@ -169,6 +178,7 @@ void omap2_set_globals_242x(void);
> void omap2_set_globals_243x(void);
> void omap2_set_globals_3xxx(void);
> void omap2_set_globals_443x(void);
> +void omap2_set_globals_5xxx(void);
> void omap2_set_globals_ti81xx(void);
> void omap2_set_globals_am33xx(void);
>
> @@ -188,6 +198,7 @@ void omap243x_map_io(void);
> void omap3_map_io(void);
> void am33xx_map_io(void);
> void omap4_map_io(void);
> +void omap5_map_io(void);
> void ti81xx_map_io(void);
> void omap_barriers_init(void);
>
> diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
> index d7f844a..93d10de 100644
> --- a/arch/arm/mach-omap2/include/mach/debug-macro.S
> +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
> @@ -60,12 +60,12 @@ omap_uart_lsr: .word 0
> beq 23f @ configure OMAP2UART3
> cmp \rp, #OMAP3UART3 @ only on 34xx
> beq 33f @ configure OMAP3UART3
> - cmp \rp, #OMAP4UART3 @ only on 44xx
> - beq 43f @ configure OMAP4UART3
> + cmp \rp, #OMAP4UART3 @ only on 44xx/54xx
> + beq 43f @ configure OMAP4/5UART3
> cmp \rp, #OMAP3UART4 @ only on 36xx
> beq 34f @ configure OMAP3UART4
> - cmp \rp, #OMAP4UART4 @ only on 44xx
> - beq 44f @ configure OMAP4UART4
> + cmp \rp, #OMAP4UART4 @ only on 44xx/54xx
> + beq 44f @ configure OMAP4/5UART4
> cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
> beq 81f @ configure UART1
> cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index cb6c11c..8976be9 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -233,6 +233,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
> };
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +static struct map_desc omap54xx_io_desc[] __initdata = {
> + {
> + .virtual = L3_54XX_VIRT,
> + .pfn = __phys_to_pfn(L3_54XX_PHYS),
> + .length = L3_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_54XX_PHYS),
> + .length = L4_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_WK_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_WK_54XX_PHYS),
> + .length = L4_WK_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_PER_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_PER_54XX_PHYS),
> + .length = L4_PER_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> +};
> +#endif
> +
> #ifdef CONFIG_SOC_OMAP2420
> void __init omap242x_map_common_io(void)
> {
> @@ -278,6 +307,12 @@ void __init omap44xx_map_common_io(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +void __init omap5_map_common_io(void)
> +{
> + iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
> +}
> +#endif
> /*
> * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
> *
> @@ -513,6 +548,15 @@ void __init omap4430_init_late(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +void __init omap5_init_early(void)
> +{
> + omap2_set_globals_5xxx();
> + omap5xxx_check_revision();
> + omap_common_init_early();
> +}
> +#endif
> +
> void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
> struct omap_sdrc_params *sdrc_cs1)
> {
> diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
> index 80b8892..cce2b65 100644
> --- a/arch/arm/mach-omap2/iomap.h
> +++ b/arch/arm/mach-omap2/iomap.h
> @@ -1,6 +1,14 @@
> /*
> * IO mappings for OMAP2+
> *
> + * IO definitions for TI OMAP processors and boards
> + *
> + * Copied from arch/arm/mach-sa1100/include/mach/io.h
> + * Copyright (C) 1997-1999 Russell King
> + *
> + * Copyright (C) 2009-2012 Texas Instruments
> + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the
> * Free Software Foundation; either version 2 of the License, or (at your
> @@ -166,4 +174,23 @@
> /* 0x49000000 --> 0xfb000000 */
> #define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
> #define L4_ABE_44XX_SIZE SZ_1M
> +/*
> + * ----------------------------------------------------------------------------
> + * Omap5 specific IO mapping
> + * ----------------------------------------------------------------------------
> + */
> +#define L3_54XX_PHYS L3_54XX_BASE /* 0x44000000 --> 0xf8000000 */
> +#define L3_54XX_VIRT (L3_54XX_PHYS + OMAP4_L3_IO_OFFSET)
> +#define L3_54XX_SIZE SZ_1M
> +
> +#define L4_54XX_PHYS L4_54XX_BASE /* 0x4a000000 --> 0xfc000000 */
> +#define L4_54XX_VIRT (L4_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_54XX_SIZE SZ_4M
> +
> +#define L4_WK_54XX_PHYS L4_WK_54XX_BASE /* 0x4ae00000 --> 0xfce00000 */
> +#define L4_WK_54XX_VIRT (L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_WK_54XX_SIZE SZ_2M
>
> +#define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
> +#define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_PER_54XX_SIZE SZ_4M
Ditto.
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index ff76ef1..2ada364 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -3619,7 +3619,7 @@ void __init omap_hwmod_init(void)
> soc_ops.assert_hardreset = _omap2_assert_hardreset;
> soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
> soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
> - } else if (cpu_is_omap44xx()) {
> + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
> soc_ops.enable_module = _omap4_enable_module;
> soc_ops.disable_module = _omap4_disable_module;
> soc_ops.wait_target_ready = _omap4_wait_target_ready;
> diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
> index 6da3ba4..44485a8 100644
> --- a/arch/arm/mach-omap2/prcm-common.h
> +++ b/arch/arm/mach-omap2/prcm-common.h
> @@ -416,7 +416,7 @@ extern void __iomem *cm_base;
> extern void __iomem *cm2_base;
> extern void __iomem *prcm_mpu_base;
>
> -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
> +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
> extern void omap_prm_base_init(void);
> extern void omap_cm_base_init(void);
> #else
> diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
> index 28cbfb2..053e24e 100644
> --- a/arch/arm/mach-omap2/prcm.c
> +++ b/arch/arm/mach-omap2/prcm.c
> @@ -160,7 +160,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
> if (omap2_globals->prcm_mpu)
> prcm_mpu_base = omap2_globals->prcm_mpu;
>
> - if (cpu_is_omap44xx()) {
> + if (cpu_is_omap44xx() || soc_is_omap54xx()) {
> omap_prm_base_init();
> omap_cm_base_init();
> }
> diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
> index d0ed8c4..8f0f5f5 100644
> --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
> +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
> @@ -39,6 +39,7 @@ struct omap_clk {
> #define CK_443X (1 << 11)
> #define CK_TI816X (1 << 12)
> #define CK_446X (1 << 13)
> +#define CK_54XX (1 << 14)
This is conflicting with AM33XX, you may want to rebase it again, since
AM33xx clock tree is already pushed and available in
linux-omap/devel-am33xx-part2.
> #define CK_1710 (1 << 15) /* 1710 extra for rate selection */
>
>
> diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
> index 656b986..323bc84 100644
> --- a/arch/arm/plat-omap/include/plat/clock.h
> +++ b/arch/arm/plat-omap/include/plat/clock.h
> @@ -61,6 +61,7 @@ struct clkops {
> #define RATE_IN_4460 (1 << 7)
> #define RATE_IN_AM33XX (1 << 8)
> #define RATE_IN_TI814X (1 << 9)
> +#define RATE_IN_54XX (1 << 10)
>
> #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
> #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
> diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
> index e897978..ddbde38 100644
> --- a/arch/arm/plat-omap/include/plat/hardware.h
> +++ b/arch/arm/plat-omap/include/plat/hardware.h
> @@ -288,5 +288,6 @@
> #include <plat/omap44xx.h>
> #include <plat/ti81xx.h>
> #include <plat/am33xx.h>
> +#include <plat/omap54xx.h>
>
> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */
> diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
> index 999ffba..045e320 100644
> --- a/arch/arm/plat-omap/include/plat/multi.h
> +++ b/arch/arm/plat-omap/include/plat/multi.h
> @@ -99,4 +99,13 @@
> # endif
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +# ifdef OMAP_NAME
> +# undef MULTI_OMAP2
> +# define MULTI_OMAP2
> +# else
> +# define OMAP_NAME omap5
> +# endif
> +#endif
> +
> #endif /* __PLAT_OMAP_MULTI_H */
> diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h
> new file mode 100644
> index 0000000..a2582bb
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/plat/omap54xx.h
> @@ -0,0 +1,32 @@
> +/*:
> + * Address mappings and base address for OMAP5 interconnects
> + * and peripherals.
> + *
> + * Copyright (C) 2012 Texas Instruments
> + * Santosh Shilimkar <santosh.shilimkar@ti.com>
> + * Sricharan <r.sricharan@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __ASM_SOC_OMAP54XX_H
> +#define __ASM_SOC_OMAP54XX_H
> +
> +/*
> + * Please place only base defines here and put the rest in device
> + * specific headers.
> + */
> +#define L4_54XX_BASE 0x4a000000
> +#define L4_WK_54XX_BASE 0x4ae00000
> +#define L4_PER_54XX_BASE 0x48000000
> +#define L3_54XX_BASE 0x44000000
> +#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
> +#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
> +#define OMAP54XX_CM_CORE_BASE 0x4a008000
> +#define OMAP54XX_PRM_BASE 0x4ae06000
> +#define OMAP54XX_PRCM_MPU_BASE 0x48243000
> +#define OMAP54XX_SCM_BASE 0x4a002000
> +#define OMAP54XX_CTRL_BASE 0x4a002800
> +
> +#endif /* __ASM_SOC_OMAP555554XX_H */
> diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
> index 28e2d25..65fce44 100644
> --- a/arch/arm/plat-omap/include/plat/serial.h
> +++ b/arch/arm/plat-omap/include/plat/serial.h
> @@ -63,6 +63,14 @@
> /* AM33XX serial port */
> #define AM33XX_UART1_BASE 0x44E09000
>
> +/* OMAP5 serial ports */
> +#define OMAP5_UART1_BASE OMAP2_UART1_BASE
> +#define OMAP5_UART2_BASE OMAP2_UART2_BASE
> +#define OMAP5_UART3_BASE OMAP4_UART3_BASE
> +#define OMAP5_UART4_BASE OMAP4_UART4_BASE
> +#define OMAP5_UART5_BASE 0x48066000
> +#define OMAP5_UART6_BASE 0x48068000
> +
> /* External port on Zoom2/3 */
> #define ZOOM_UART_BASE 0x10000000
> #define ZOOM_UART_VIRT 0xfa400000
> @@ -97,6 +105,8 @@
> #define TI81XXUART2 82
> #define TI81XXUART3 83
> #define AM33XXUART1 84
> +#define OMAP5UART3 OMAP4UART3
> +#define OMAP5UART4 OMAP4UART4
> #define ZOOM_UART 95 /* Only on zoom2/3 */
>
> /* This is only used by 8250.c for omap1510 */
> diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
> index ac43233..b8d19a1 100644
> --- a/arch/arm/plat-omap/include/plat/uncompress.h
> +++ b/arch/arm/plat-omap/include/plat/uncompress.h
> @@ -95,6 +95,9 @@ static inline void flush(void)
> _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
> OMAP4UART##p)
>
> +#define DEBUG_LL_OMAP5(p, mach) \
> + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
> + OMAP5UART##p)
> /* Zoom2/3 shift is different for UART1 and external port */
> #define DEBUG_LL_ZOOM(mach) \
> _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
> @@ -177,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
> DEBUG_LL_OMAP4(3, omap_4430sdp);
> DEBUG_LL_OMAP4(3, omap4_panda);
>
> + /* omap5 based boards using UART3 */
> + DEBUG_LL_OMAP5(3, omap5_sevm);
> +
> /* zoom2/3 external uart */
> DEBUG_LL_ZOOM(omap_zoom2);
> DEBUG_LL_ZOOM(omap_zoom3);
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 70cf825..766181c 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -6,8 +6,8 @@
> * Copyright (C) 2005 Nokia Corporation
> * Written by Tony Lindgren <tony@atomide.com>
> *
> - * Copyright (C) 2009 Texas Instruments
> - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> + * Copyright (C) 2009-2012 Texas Instruments
> + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -44,6 +44,7 @@
> #else
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #endif
> +#define OMAP5_SRAM_PA 0x40300000
>
We have mix of such definitions here, for example,
"arch/arm/plat-omap/include/plat/sram.h"
and now in arch/arm/plat-omap/sram.c here itself.
May be right time to clean it up now.
Thanks,
Vaibhav
> #if defined(CONFIG_ARCH_OMAP2PLUS)
> #define SRAM_BOOTLOADER_SZ 0x00
> @@ -118,6 +119,9 @@ static void __init omap_detect_sram(void)
> } else if (cpu_is_omap44xx()) {
> omap_sram_start = OMAP4_SRAM_PUB_PA;
> omap_sram_size = 0xa000; /* 40K */
> + } else if (soc_is_omap54xx()) {
> + omap_sram_start = OMAP5_SRAM_PA;
> + omap_sram_size = SZ_128K; /* 128KB */
> } else {
> omap_sram_start = OMAP2_SRAM_PUB_PA;
> omap_sram_size = 0x800; /* 2K */
> @@ -132,6 +136,9 @@ static void __init omap_detect_sram(void)
> } else if (cpu_is_omap44xx()) {
> omap_sram_start = OMAP4_SRAM_PA;
> omap_sram_size = 0xe000; /* 56K */
> + } else if (soc_is_omap54xx()) {
> + omap_sram_start = OMAP5_SRAM_PA;
> + omap_sram_size = SZ_128K; /* 128KB */
> } else {
> omap_sram_start = OMAP2_SRAM_PA;
> if (cpu_is_omap242x())
>
WARNING: multiple messages have this Message-ID (diff)
From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC
Date: Mon, 9 Jul 2012 14:20:41 +0530 [thread overview]
Message-ID: <4FFA9B61.8030808@ti.com> (raw)
In-Reply-To: <1341566515-22665-5-git-send-email-santosh.shilimkar@ti.com>
On 7/6/2012 2:51 PM, Santosh Shilimkar wrote:
> From: R Sricharan <r.sricharan@ti.com>
>
> OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP
> architecture. It's a dual core SOC with GIC used for interrupt
> handling and with an integrated L2 cache controller.
>
> OMAP5432 is another variant of OMAP5430, with a
> memory controller supporting DDR3 and SATA.
>
> Patch includes:
> - The machine specific headers and sources updates.
> - Platform header updates.
> - Minimum initialisation support for serial.
> - IO table init
>
> Signed-off-by: R Sricharan <r.sricharan@ti.com>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> arch/arm/mach-omap2/Makefile | 23 ++++++++++---
> arch/arm/mach-omap2/common.c | 24 +++++++++++++
> arch/arm/mach-omap2/common.h | 11 ++++++
> arch/arm/mach-omap2/include/mach/debug-macro.S | 8 ++---
> arch/arm/mach-omap2/io.c | 44 ++++++++++++++++++++++++
> arch/arm/mach-omap2/iomap.h | 27 +++++++++++++++
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/prcm-common.h | 2 +-
> arch/arm/mach-omap2/prcm.c | 2 +-
> arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
> arch/arm/plat-omap/include/plat/clock.h | 1 +
> arch/arm/plat-omap/include/plat/hardware.h | 1 +
> arch/arm/plat-omap/include/plat/multi.h | 9 +++++
> arch/arm/plat-omap/include/plat/omap54xx.h | 32 +++++++++++++++++
> arch/arm/plat-omap/include/plat/serial.h | 10 ++++++
> arch/arm/plat-omap/include/plat/uncompress.h | 6 ++++
> arch/arm/plat-omap/sram.c | 11 ++++--
> 17 files changed, 200 insertions(+), 14 deletions(-)
> create mode 100644 arch/arm/plat-omap/include/plat/omap54xx.h
>
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 240f196..085e171 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
> obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
> obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
> obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
> +obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
>
> ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
> obj-y += mcbsp.o
> @@ -29,8 +30,10 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
>
> obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
> obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
> -obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
> -obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
> +omap-4-5-common = omap4-common.o omap-wakeupgen.o \
> + sleep44xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
> +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
>
> plus_sec := $(call as-instr,.arch_extension sec,+sec)
> AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
> @@ -70,6 +73,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
> obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
> obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
> obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
> +obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
> obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
> obj-$(CONFIG_PM_DEBUG) += pm-debug.o
> obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
> @@ -85,14 +89,16 @@ endif
> endif
>
> # PRCM
> +omap-prcm-4-5-common = prcm.o cminst44xx.o cm44xx.o \
> + prcm_mpu44xx.o prminst44xx.o \
> + vc44xx_data.o vp44xx_data.o
> obj-y += prm_common.o
> obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
> obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm.o cminst44xx.o cm44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += prcm_mpu44xx.o prminst44xx.o
> -obj-$(CONFIG_ARCH_OMAP4) += vc44xx_data.o vp44xx_data.o prm44xx.o
> obj-$(CONFIG_SOC_AM33XX) += prcm.o prm33xx.o cm33xx.o
> +obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) prm44xx.o
> +obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
>
> # OMAP voltage domains
> voltagedomain-common := voltage.o vc.o vp.o
> @@ -104,6 +110,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
> obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
> obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
>
> # OMAP powerdomain framework
> powerdomain-common += powerdomain.o powerdomain-common.o
> @@ -121,6 +128,8 @@ obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
> obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
> obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
> +obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
>
> # PRCM clockdomain control
> clockdomain-common += clockdomain.o
> @@ -139,6 +148,8 @@ obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
> obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
> obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
> obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
> +obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
> +obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
>
> # Clock framework
> obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
> @@ -157,6 +168,8 @@ obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
> obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
> obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
> obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
> +obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
> +obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
>
> # OMAP2 clock rate set data (old "OPP" data)
> obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
> diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
> index 73d2a0b..069f972 100644
> --- a/arch/arm/mach-omap2/common.c
> +++ b/arch/arm/mach-omap2/common.c
> @@ -178,3 +178,27 @@ void __init omap4_map_io(void)
> }
> #endif
>
> +#if defined(CONFIG_SOC_OMAP5)
> +static struct omap_globals omap5_globals = {
> + .class = OMAP54XX_CLASS,
> + .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
> + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
> + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
> + .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
> + .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
> + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
> + .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
I am not sure whether we had discussed on this before, couldn't find it.
Why don't we reuse OMAP4 data here and elsewhere??
> +};
> +
> +void __init omap2_set_globals_5xxx(void)
> +{
> + omap2_set_globals_tap(&omap5_globals);
> + omap2_set_globals_control(&omap5_globals);
> + omap2_set_globals_prcm(&omap5_globals);
> +}
> +
> +void __init omap5_map_io(void)
> +{
> + omap5_map_common_io();
> +}
> +#endif
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 404f172..399e5bb 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -115,6 +115,14 @@ static inline int omap_mux_late_init(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +extern void omap5_map_common_io(void);
> +#else
> +static inline void omap5_map_common_io(void)
> +{
> +}
> +#endif
> +
> extern void omap2_init_common_infrastructure(void);
>
> extern struct sys_timer omap2_timer;
> @@ -134,6 +142,7 @@ void am35xx_init_early(void);
> void ti81xx_init_early(void);
> void am33xx_init_early(void);
> void omap4430_init_early(void);
> +void omap5_init_early(void);
> void omap3_init_late(void); /* Do not use this one */
> void omap4430_init_late(void);
> void omap2420_init_late(void);
> @@ -169,6 +178,7 @@ void omap2_set_globals_242x(void);
> void omap2_set_globals_243x(void);
> void omap2_set_globals_3xxx(void);
> void omap2_set_globals_443x(void);
> +void omap2_set_globals_5xxx(void);
> void omap2_set_globals_ti81xx(void);
> void omap2_set_globals_am33xx(void);
>
> @@ -188,6 +198,7 @@ void omap243x_map_io(void);
> void omap3_map_io(void);
> void am33xx_map_io(void);
> void omap4_map_io(void);
> +void omap5_map_io(void);
> void ti81xx_map_io(void);
> void omap_barriers_init(void);
>
> diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
> index d7f844a..93d10de 100644
> --- a/arch/arm/mach-omap2/include/mach/debug-macro.S
> +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
> @@ -60,12 +60,12 @@ omap_uart_lsr: .word 0
> beq 23f @ configure OMAP2UART3
> cmp \rp, #OMAP3UART3 @ only on 34xx
> beq 33f @ configure OMAP3UART3
> - cmp \rp, #OMAP4UART3 @ only on 44xx
> - beq 43f @ configure OMAP4UART3
> + cmp \rp, #OMAP4UART3 @ only on 44xx/54xx
> + beq 43f @ configure OMAP4/5UART3
> cmp \rp, #OMAP3UART4 @ only on 36xx
> beq 34f @ configure OMAP3UART4
> - cmp \rp, #OMAP4UART4 @ only on 44xx
> - beq 44f @ configure OMAP4UART4
> + cmp \rp, #OMAP4UART4 @ only on 44xx/54xx
> + beq 44f @ configure OMAP4/5UART4
> cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
> beq 81f @ configure UART1
> cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index cb6c11c..8976be9 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -233,6 +233,35 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
> };
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +static struct map_desc omap54xx_io_desc[] __initdata = {
> + {
> + .virtual = L3_54XX_VIRT,
> + .pfn = __phys_to_pfn(L3_54XX_PHYS),
> + .length = L3_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_54XX_PHYS),
> + .length = L4_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_WK_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_WK_54XX_PHYS),
> + .length = L4_WK_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> + {
> + .virtual = L4_PER_54XX_VIRT,
> + .pfn = __phys_to_pfn(L4_PER_54XX_PHYS),
> + .length = L4_PER_54XX_SIZE,
> + .type = MT_DEVICE,
> + },
> +};
> +#endif
> +
> #ifdef CONFIG_SOC_OMAP2420
> void __init omap242x_map_common_io(void)
> {
> @@ -278,6 +307,12 @@ void __init omap44xx_map_common_io(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +void __init omap5_map_common_io(void)
> +{
> + iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
> +}
> +#endif
> /*
> * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
> *
> @@ -513,6 +548,15 @@ void __init omap4430_init_late(void)
> }
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +void __init omap5_init_early(void)
> +{
> + omap2_set_globals_5xxx();
> + omap5xxx_check_revision();
> + omap_common_init_early();
> +}
> +#endif
> +
> void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
> struct omap_sdrc_params *sdrc_cs1)
> {
> diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
> index 80b8892..cce2b65 100644
> --- a/arch/arm/mach-omap2/iomap.h
> +++ b/arch/arm/mach-omap2/iomap.h
> @@ -1,6 +1,14 @@
> /*
> * IO mappings for OMAP2+
> *
> + * IO definitions for TI OMAP processors and boards
> + *
> + * Copied from arch/arm/mach-sa1100/include/mach/io.h
> + * Copyright (C) 1997-1999 Russell King
> + *
> + * Copyright (C) 2009-2012 Texas Instruments
> + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the
> * Free Software Foundation; either version 2 of the License, or (at your
> @@ -166,4 +174,23 @@
> /* 0x49000000 --> 0xfb000000 */
> #define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
> #define L4_ABE_44XX_SIZE SZ_1M
> +/*
> + * ----------------------------------------------------------------------------
> + * Omap5 specific IO mapping
> + * ----------------------------------------------------------------------------
> + */
> +#define L3_54XX_PHYS L3_54XX_BASE /* 0x44000000 --> 0xf8000000 */
> +#define L3_54XX_VIRT (L3_54XX_PHYS + OMAP4_L3_IO_OFFSET)
> +#define L3_54XX_SIZE SZ_1M
> +
> +#define L4_54XX_PHYS L4_54XX_BASE /* 0x4a000000 --> 0xfc000000 */
> +#define L4_54XX_VIRT (L4_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_54XX_SIZE SZ_4M
> +
> +#define L4_WK_54XX_PHYS L4_WK_54XX_BASE /* 0x4ae00000 --> 0xfce00000 */
> +#define L4_WK_54XX_VIRT (L4_WK_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_WK_54XX_SIZE SZ_2M
>
> +#define L4_PER_54XX_PHYS L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
> +#define L4_PER_54XX_VIRT (L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
> +#define L4_PER_54XX_SIZE SZ_4M
Ditto.
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index ff76ef1..2ada364 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -3619,7 +3619,7 @@ void __init omap_hwmod_init(void)
> soc_ops.assert_hardreset = _omap2_assert_hardreset;
> soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
> soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
> - } else if (cpu_is_omap44xx()) {
> + } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
> soc_ops.enable_module = _omap4_enable_module;
> soc_ops.disable_module = _omap4_disable_module;
> soc_ops.wait_target_ready = _omap4_wait_target_ready;
> diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
> index 6da3ba4..44485a8 100644
> --- a/arch/arm/mach-omap2/prcm-common.h
> +++ b/arch/arm/mach-omap2/prcm-common.h
> @@ -416,7 +416,7 @@ extern void __iomem *cm_base;
> extern void __iomem *cm2_base;
> extern void __iomem *prcm_mpu_base;
>
> -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
> +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
> extern void omap_prm_base_init(void);
> extern void omap_cm_base_init(void);
> #else
> diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
> index 28cbfb2..053e24e 100644
> --- a/arch/arm/mach-omap2/prcm.c
> +++ b/arch/arm/mach-omap2/prcm.c
> @@ -160,7 +160,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
> if (omap2_globals->prcm_mpu)
> prcm_mpu_base = omap2_globals->prcm_mpu;
>
> - if (cpu_is_omap44xx()) {
> + if (cpu_is_omap44xx() || soc_is_omap54xx()) {
> omap_prm_base_init();
> omap_cm_base_init();
> }
> diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
> index d0ed8c4..8f0f5f5 100644
> --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
> +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
> @@ -39,6 +39,7 @@ struct omap_clk {
> #define CK_443X (1 << 11)
> #define CK_TI816X (1 << 12)
> #define CK_446X (1 << 13)
> +#define CK_54XX (1 << 14)
This is conflicting with AM33XX, you may want to rebase it again, since
AM33xx clock tree is already pushed and available in
linux-omap/devel-am33xx-part2.
> #define CK_1710 (1 << 15) /* 1710 extra for rate selection */
>
>
> diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
> index 656b986..323bc84 100644
> --- a/arch/arm/plat-omap/include/plat/clock.h
> +++ b/arch/arm/plat-omap/include/plat/clock.h
> @@ -61,6 +61,7 @@ struct clkops {
> #define RATE_IN_4460 (1 << 7)
> #define RATE_IN_AM33XX (1 << 8)
> #define RATE_IN_TI814X (1 << 9)
> +#define RATE_IN_54XX (1 << 10)
>
> #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
> #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
> diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
> index e897978..ddbde38 100644
> --- a/arch/arm/plat-omap/include/plat/hardware.h
> +++ b/arch/arm/plat-omap/include/plat/hardware.h
> @@ -288,5 +288,6 @@
> #include <plat/omap44xx.h>
> #include <plat/ti81xx.h>
> #include <plat/am33xx.h>
> +#include <plat/omap54xx.h>
>
> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */
> diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
> index 999ffba..045e320 100644
> --- a/arch/arm/plat-omap/include/plat/multi.h
> +++ b/arch/arm/plat-omap/include/plat/multi.h
> @@ -99,4 +99,13 @@
> # endif
> #endif
>
> +#ifdef CONFIG_SOC_OMAP5
> +# ifdef OMAP_NAME
> +# undef MULTI_OMAP2
> +# define MULTI_OMAP2
> +# else
> +# define OMAP_NAME omap5
> +# endif
> +#endif
> +
> #endif /* __PLAT_OMAP_MULTI_H */
> diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h
> new file mode 100644
> index 0000000..a2582bb
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/plat/omap54xx.h
> @@ -0,0 +1,32 @@
> +/*:
> + * Address mappings and base address for OMAP5 interconnects
> + * and peripherals.
> + *
> + * Copyright (C) 2012 Texas Instruments
> + * Santosh Shilimkar <santosh.shilimkar@ti.com>
> + * Sricharan <r.sricharan@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __ASM_SOC_OMAP54XX_H
> +#define __ASM_SOC_OMAP54XX_H
> +
> +/*
> + * Please place only base defines here and put the rest in device
> + * specific headers.
> + */
> +#define L4_54XX_BASE 0x4a000000
> +#define L4_WK_54XX_BASE 0x4ae00000
> +#define L4_PER_54XX_BASE 0x48000000
> +#define L3_54XX_BASE 0x44000000
> +#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
> +#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
> +#define OMAP54XX_CM_CORE_BASE 0x4a008000
> +#define OMAP54XX_PRM_BASE 0x4ae06000
> +#define OMAP54XX_PRCM_MPU_BASE 0x48243000
> +#define OMAP54XX_SCM_BASE 0x4a002000
> +#define OMAP54XX_CTRL_BASE 0x4a002800
> +
> +#endif /* __ASM_SOC_OMAP555554XX_H */
> diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
> index 28e2d25..65fce44 100644
> --- a/arch/arm/plat-omap/include/plat/serial.h
> +++ b/arch/arm/plat-omap/include/plat/serial.h
> @@ -63,6 +63,14 @@
> /* AM33XX serial port */
> #define AM33XX_UART1_BASE 0x44E09000
>
> +/* OMAP5 serial ports */
> +#define OMAP5_UART1_BASE OMAP2_UART1_BASE
> +#define OMAP5_UART2_BASE OMAP2_UART2_BASE
> +#define OMAP5_UART3_BASE OMAP4_UART3_BASE
> +#define OMAP5_UART4_BASE OMAP4_UART4_BASE
> +#define OMAP5_UART5_BASE 0x48066000
> +#define OMAP5_UART6_BASE 0x48068000
> +
> /* External port on Zoom2/3 */
> #define ZOOM_UART_BASE 0x10000000
> #define ZOOM_UART_VIRT 0xfa400000
> @@ -97,6 +105,8 @@
> #define TI81XXUART2 82
> #define TI81XXUART3 83
> #define AM33XXUART1 84
> +#define OMAP5UART3 OMAP4UART3
> +#define OMAP5UART4 OMAP4UART4
> #define ZOOM_UART 95 /* Only on zoom2/3 */
>
> /* This is only used by 8250.c for omap1510 */
> diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
> index ac43233..b8d19a1 100644
> --- a/arch/arm/plat-omap/include/plat/uncompress.h
> +++ b/arch/arm/plat-omap/include/plat/uncompress.h
> @@ -95,6 +95,9 @@ static inline void flush(void)
> _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
> OMAP4UART##p)
>
> +#define DEBUG_LL_OMAP5(p, mach) \
> + _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
> + OMAP5UART##p)
> /* Zoom2/3 shift is different for UART1 and external port */
> #define DEBUG_LL_ZOOM(mach) \
> _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
> @@ -177,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
> DEBUG_LL_OMAP4(3, omap_4430sdp);
> DEBUG_LL_OMAP4(3, omap4_panda);
>
> + /* omap5 based boards using UART3 */
> + DEBUG_LL_OMAP5(3, omap5_sevm);
> +
> /* zoom2/3 external uart */
> DEBUG_LL_ZOOM(omap_zoom2);
> DEBUG_LL_ZOOM(omap_zoom3);
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 70cf825..766181c 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -6,8 +6,8 @@
> * Copyright (C) 2005 Nokia Corporation
> * Written by Tony Lindgren <tony@atomide.com>
> *
> - * Copyright (C) 2009 Texas Instruments
> - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> + * Copyright (C) 2009-2012 Texas Instruments
> + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -44,6 +44,7 @@
> #else
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #endif
> +#define OMAP5_SRAM_PA 0x40300000
>
We have mix of such definitions here, for example,
"arch/arm/plat-omap/include/plat/sram.h"
and now in arch/arm/plat-omap/sram.c here itself.
May be right time to clean it up now.
Thanks,
Vaibhav
> #if defined(CONFIG_ARCH_OMAP2PLUS)
> #define SRAM_BOOTLOADER_SZ 0x00
> @@ -118,6 +119,9 @@ static void __init omap_detect_sram(void)
> } else if (cpu_is_omap44xx()) {
> omap_sram_start = OMAP4_SRAM_PUB_PA;
> omap_sram_size = 0xa000; /* 40K */
> + } else if (soc_is_omap54xx()) {
> + omap_sram_start = OMAP5_SRAM_PA;
> + omap_sram_size = SZ_128K; /* 128KB */
> } else {
> omap_sram_start = OMAP2_SRAM_PUB_PA;
> omap_sram_size = 0x800; /* 2K */
> @@ -132,6 +136,9 @@ static void __init omap_detect_sram(void)
> } else if (cpu_is_omap44xx()) {
> omap_sram_start = OMAP4_SRAM_PA;
> omap_sram_size = 0xe000; /* 56K */
> + } else if (soc_is_omap54xx()) {
> + omap_sram_start = OMAP5_SRAM_PA;
> + omap_sram_size = SZ_128K; /* 128KB */
> } else {
> omap_sram_start = OMAP2_SRAM_PA;
> if (cpu_is_omap242x())
>
next prev parent reply other threads:[~2012-07-09 8:50 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 9:21 [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 01/14] ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 02/14] ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-09 8:50 ` Vaibhav Hiremath
2012-07-09 8:50 ` Vaibhav Hiremath
2012-07-09 10:42 ` Shilimkar, Santosh
2012-07-09 10:42 ` Shilimkar, Santosh
2012-07-10 6:41 ` Hiremath, Vaibhav
2012-07-10 6:41 ` Hiremath, Vaibhav
2012-07-10 7:12 ` Shilimkar, Santosh
2012-07-10 7:12 ` Shilimkar, Santosh
2012-07-10 7:25 ` Hiremath, Vaibhav
2012-07-10 7:25 ` Hiremath, Vaibhav
2012-07-09 16:47 ` Kevin Hilman
2012-07-09 16:47 ` Kevin Hilman
2012-07-09 23:21 ` Jon Hunter
2012-07-09 23:21 ` Jon Hunter
2012-07-10 5:50 ` Shilimkar, Santosh
2012-07-10 5:50 ` Shilimkar, Santosh
2012-07-09 23:52 ` Jon Hunter
2012-07-09 23:52 ` Jon Hunter
2012-07-06 9:21 ` [PATCH v2 03/14] ARM: OMAP5: id: Add cpu id for ES versions Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-11-02 10:03 ` Roger Quadros
2012-11-02 10:03 ` Roger Quadros
2012-11-06 18:18 ` Tony Lindgren
2012-11-06 18:18 ` Tony Lindgren
2012-07-06 9:21 ` [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-09 8:50 ` Vaibhav Hiremath [this message]
2012-07-09 8:50 ` Vaibhav Hiremath
2012-07-09 10:39 ` Shilimkar, Santosh
2012-07-09 10:39 ` Shilimkar, Santosh
2012-07-10 5:57 ` Hiremath, Vaibhav
2012-07-10 5:57 ` Hiremath, Vaibhav
2012-07-10 6:06 ` Shilimkar, Santosh
2012-07-10 6:06 ` Shilimkar, Santosh
2012-07-10 6:11 ` Hiremath, Vaibhav
2012-07-10 6:11 ` Hiremath, Vaibhav
2012-07-09 13:11 ` Tony Lindgren
2012-07-09 13:11 ` Tony Lindgren
2012-07-09 13:25 ` Tony Lindgren
2012-07-09 13:25 ` Tony Lindgren
2012-07-09 13:26 ` Shilimkar, Santosh
2012-07-09 13:26 ` Shilimkar, Santosh
2012-07-09 14:26 ` Shilimkar, Santosh
2012-07-09 14:26 ` Shilimkar, Santosh
2012-07-10 6:25 ` Hiremath, Vaibhav
2012-07-10 6:25 ` Hiremath, Vaibhav
2012-07-10 8:18 ` Tony Lindgren
2012-07-10 8:18 ` Tony Lindgren
2012-07-10 8:30 ` Hiremath, Vaibhav
2012-07-10 8:30 ` Hiremath, Vaibhav
2012-07-10 8:37 ` Tony Lindgren
2012-07-10 8:37 ` Tony Lindgren
2012-08-15 22:26 ` Paul Walmsley
2012-08-15 22:26 ` Paul Walmsley
2012-08-16 8:39 ` Tony Lindgren
2012-08-16 8:39 ` Tony Lindgren
2012-08-16 9:36 ` Hiremath, Vaibhav
2012-08-16 9:36 ` Hiremath, Vaibhav
2012-07-06 9:21 ` [PATCH v2 05/14] ARM: OMAP5: timer: Add clocksource, clockevent support Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 06/14] ARM: OMAP5: gpmc: Update gpmc_init() Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 07/14] ARM: OMAP5: l3: Add l3 error handler support for omap5 Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 08/14] ARM: OMAP5: Add the WakeupGen IP updates Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 09/14] ARM: OMAP5: Add SMP support Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 10/14] ARM: omap2+: board-generic: clean up the irq data from board file Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 11/14] ARM: OMAP5: board-generic: Add device tree support Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 12/14] arm/dts: OMAP5: Add omap5 dts files Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 13/14] ARM: OMAP5: Add the build support Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 9:21 ` [PATCH v2 14/14] ARM: Kconfig update to support additional GPIOs in OMAP5 Santosh Shilimkar
2012-07-06 9:21 ` Santosh Shilimkar
2012-07-06 12:36 ` [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Tony Lindgren
2012-07-06 12:36 ` Tony Lindgren
2012-07-06 12:47 ` Shilimkar, Santosh
2012-07-06 12:47 ` Shilimkar, Santosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFA9B61.8030808@ti.com \
--to=hvaibhav@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=r.sricharan@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.