All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak-l0cyMroinI0@public.gmane.org>
To: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	balbi-l0cyMroinI0@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 10 Jul 2012 11:57:05 +0530	[thread overview]
Message-ID: <4FFBCB39.1010809@ti.com> (raw)
In-Reply-To: <1340884267-28908-11-git-send-email-kishon-l0cyMroinI0@public.gmane.org>

On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
>
> Signed-off-by: Kishon Vijay Abraham I<kishon-l0cyMroinI0@public.gmane.org>
> ---
>   arch/arm/boot/dts/omap3-beagle.dts |    6 ++++++
>   arch/arm/boot/dts/omap3-evm.dts    |    6 ++++++
>   arch/arm/boot/dts/omap3.dtsi       |    8 ++++++++
>   arch/arm/boot/dts/omap4-panda.dts  |    6 ++++++
>   arch/arm/boot/dts/omap4-sdp.dts    |    6 ++++++
>   arch/arm/boot/dts/omap4.dtsi       |    8 ++++++++
>   6 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 5b4506c..f3d7076 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
>   &mmc3 {
>   	status = "disable";
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index 2eee16e..8963b3d 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -18,3 +18,9 @@
>   		reg =<0x80000000 0x10000000>; /* 256 MB */
>   	};
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 99474fa..2f565d6 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -215,5 +215,13 @@
>   			compatible = "ti,omap3-hsmmc";
>   			ti,hwmods = "mmc3";
>   		};
> +
> +		usb_otg_hs: usb_otg_hs@4a0ab000 {
> +			compatible = "ti,musb-omap2430";

this compatible doesn't seem right in omap3.dtsi. Same with
the below entry in omap4.dtsi.
See other IP blocks which are reused across OMAP2/3/4 on
how the compatible for those are handled.

> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 1efe0c5..0825fa7 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -89,3 +89,9 @@
>   	ti,non-removable;
>   	bus-width =<4>;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d08c4d1..5244d51 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -158,3 +158,9 @@
>   	bus-width =<4>;
>   	ti,non-removable;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 4d2dcc1..bc7b3c3 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -285,5 +285,13 @@
>   				<0x4a002300 0x1>;
>   			};
>   		};
> +
> +		usb_otg_hs: usb_otg_hs@4a0ab000 {
> +			compatible = "ti,musb-omap2430";
> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };

WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 10 Jul 2012 11:57:05 +0530	[thread overview]
Message-ID: <4FFBCB39.1010809@ti.com> (raw)
In-Reply-To: <1340884267-28908-11-git-send-email-kishon@ti.com>

On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
>
> Signed-off-by: Kishon Vijay Abraham I<kishon@ti.com>
> ---
>   arch/arm/boot/dts/omap3-beagle.dts |    6 ++++++
>   arch/arm/boot/dts/omap3-evm.dts    |    6 ++++++
>   arch/arm/boot/dts/omap3.dtsi       |    8 ++++++++
>   arch/arm/boot/dts/omap4-panda.dts  |    6 ++++++
>   arch/arm/boot/dts/omap4-sdp.dts    |    6 ++++++
>   arch/arm/boot/dts/omap4.dtsi       |    8 ++++++++
>   6 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 5b4506c..f3d7076 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
>   &mmc3 {
>   	status = "disable";
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index 2eee16e..8963b3d 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -18,3 +18,9 @@
>   		reg =<0x80000000 0x10000000>; /* 256 MB */
>   	};
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 99474fa..2f565d6 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -215,5 +215,13 @@
>   			compatible = "ti,omap3-hsmmc";
>   			ti,hwmods = "mmc3";
>   		};
> +
> +		usb_otg_hs: usb_otg_hs at 4a0ab000 {
> +			compatible = "ti,musb-omap2430";

this compatible doesn't seem right in omap3.dtsi. Same with
the below entry in omap4.dtsi.
See other IP blocks which are reused across OMAP2/3/4 on
how the compatible for those are handled.

> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 1efe0c5..0825fa7 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -89,3 +89,9 @@
>   	ti,non-removable;
>   	bus-width =<4>;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d08c4d1..5244d51 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -158,3 +158,9 @@
>   	bus-width =<4>;
>   	ti,non-removable;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 4d2dcc1..bc7b3c3 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -285,5 +285,13 @@
>   				<0x4a002300 0x1>;
>   			};
>   		};
> +
> +		usb_otg_hs: usb_otg_hs at 4a0ab000 {
> +			compatible = "ti,musb-omap2430";
> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };

WARNING: multiple messages have this Message-ID (diff)
From: Rajendra Nayak <rnayak@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: grant.likely@secretlab.ca, rob.herring@calxeda.com,
	rob@landley.net, linux@arm.linux.org.uk,
	gregkh@linuxfoundation.org, b-cousson@ti.com, tony@atomide.com,
	devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, balbi@ti.com,
	linux-omap@vger.kernel.org, linux-usb@vger.kernel.org,
	hvaibhav@ti.com
Subject: Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
Date: Tue, 10 Jul 2012 11:57:05 +0530	[thread overview]
Message-ID: <4FFBCB39.1010809@ti.com> (raw)
In-Reply-To: <1340884267-28908-11-git-send-email-kishon@ti.com>

On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
> Add usb otg data node in omap4/omap3 device tree file. Also update
> the node with board specific setting in omapx-<board>.dts file.
>
> Signed-off-by: Kishon Vijay Abraham I<kishon@ti.com>
> ---
>   arch/arm/boot/dts/omap3-beagle.dts |    6 ++++++
>   arch/arm/boot/dts/omap3-evm.dts    |    6 ++++++
>   arch/arm/boot/dts/omap3.dtsi       |    8 ++++++++
>   arch/arm/boot/dts/omap4-panda.dts  |    6 ++++++
>   arch/arm/boot/dts/omap4-sdp.dts    |    6 ++++++
>   arch/arm/boot/dts/omap4.dtsi       |    8 ++++++++
>   6 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 5b4506c..f3d7076 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -67,3 +67,9 @@
>   &mmc3 {
>   	status = "disable";
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
> index 2eee16e..8963b3d 100644
> --- a/arch/arm/boot/dts/omap3-evm.dts
> +++ b/arch/arm/boot/dts/omap3-evm.dts
> @@ -18,3 +18,9 @@
>   		reg =<0x80000000 0x10000000>; /* 256 MB */
>   	};
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<0>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 99474fa..2f565d6 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -215,5 +215,13 @@
>   			compatible = "ti,omap3-hsmmc";
>   			ti,hwmods = "mmc3";
>   		};
> +
> +		usb_otg_hs: usb_otg_hs@4a0ab000 {
> +			compatible = "ti,musb-omap2430";

this compatible doesn't seem right in omap3.dtsi. Same with
the below entry in omap4.dtsi.
See other IP blocks which are reused across OMAP2/3/4 on
how the compatible for those are handled.

> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index 1efe0c5..0825fa7 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -89,3 +89,9 @@
>   	ti,non-removable;
>   	bus-width =<4>;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index d08c4d1..5244d51 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -158,3 +158,9 @@
>   	bus-width =<4>;
>   	ti,non-removable;
>   };
> +
> +&usb_otg_hs {
> +	interface_type =<1>;
> +	mode =<3>;
> +	power =<50>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 4d2dcc1..bc7b3c3 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -285,5 +285,13 @@
>   				<0x4a002300 0x1>;
>   			};
>   		};
> +
> +		usb_otg_hs: usb_otg_hs@4a0ab000 {
> +			compatible = "ti,musb-omap2430";
> +			ti,hwmods = "usb_otg_hs";
> +			multipoint =<1>;
> +			num_eps =<16>;
> +			ram_bits =<12>;
> +		};
>   	};
>   };


  parent reply	other threads:[~2012-07-10  6:27 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-28 11:50 [PATCH v1 00/11] omap: musb: Add device tree support Kishon Vijay Abraham I
2012-06-28 11:50 ` Kishon Vijay Abraham I
2012-06-28 11:50 ` Kishon Vijay Abraham I
2012-06-28 11:50 ` [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-07-10  5:46   ` Rajendra Nayak
2012-07-10  5:46     ` Rajendra Nayak
2012-07-10  6:03     ` Venu Byravarasu
2012-07-10  6:03       ` Venu Byravarasu
     [not found]       ` <D958900912E20642BCBC71664EFECE3E6DDAD9FF96-QZ+emBqkIFBDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2012-07-10  6:48         ` ABRAHAM, KISHON VIJAY
2012-07-10  6:48           ` ABRAHAM, KISHON VIJAY
2012-07-10  6:48           ` ABRAHAM, KISHON VIJAY
2012-07-10  7:05           ` Rajendra Nayak
2012-07-10  7:05             ` Rajendra Nayak
2012-07-10  7:05           ` Venu Byravarasu
2012-07-10  7:05             ` Venu Byravarasu
     [not found]     ` <4FFBC1D0.5030506-l0cyMroinI0@public.gmane.org>
2012-07-10  6:37       ` ABRAHAM, KISHON VIJAY
2012-07-10  6:37         ` ABRAHAM, KISHON VIJAY
2012-07-10  6:37         ` ABRAHAM, KISHON VIJAY
     [not found]         ` <CAAe_U6L9qiBMXWeS2POeBod8uASCtmqDc4DigwBx1bJ-hhaNRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-07-10  6:49           ` Rajendra Nayak
2012-07-10  6:49             ` Rajendra Nayak
2012-07-10  6:49             ` Rajendra Nayak
2012-06-28 11:50 ` [PATCH v1 02/11] arm/dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-06-28 11:50 ` [PATCH v1 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2 Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-06-28 11:50   ` Kishon Vijay Abraham I
2012-06-28 11:51 ` [PATCH v1 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51 ` [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
     [not found]   ` <1340884267-28908-6-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-07-10  5:58     ` Rajendra Nayak
2012-07-10  5:58       ` Rajendra Nayak
2012-07-10  5:58       ` Rajendra Nayak
2012-07-10  6:28       ` ABRAHAM, KISHON VIJAY
2012-07-10  6:28         ` ABRAHAM, KISHON VIJAY
2012-07-10  6:44         ` Rajendra Nayak
2012-07-10  6:44           ` Rajendra Nayak
     [not found]           ` <4FFBCF45.7000304-l0cyMroinI0@public.gmane.org>
2012-07-10  8:18             ` ABRAHAM, KISHON VIJAY
2012-07-10  8:18               ` ABRAHAM, KISHON VIJAY
2012-07-10  8:18               ` ABRAHAM, KISHON VIJAY
2012-06-28 11:51 ` [PATCH v1 06/11] arm/dts: Add twl6030-usb data Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51 ` [PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-07-10  6:02   ` Rajendra Nayak
2012-07-10  6:02     ` Rajendra Nayak
2012-07-10  6:52     ` ABRAHAM, KISHON VIJAY
2012-07-10  6:52       ` ABRAHAM, KISHON VIJAY
2012-07-10  7:02       ` Rajendra Nayak
2012-07-10  7:02         ` Rajendra Nayak
2012-06-28 11:51 ` [PATCH v1 08/11] arm/dts: Add twl4030-usb data Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-07-10  6:13   ` Rajendra Nayak
2012-07-10  6:13     ` Rajendra Nayak
2012-07-10  6:55     ` ABRAHAM, KISHON VIJAY
2012-07-10  6:55       ` ABRAHAM, KISHON VIJAY
2012-06-28 11:51 ` [PATCH v1 09/11] drivers: usb: musb: Add device tree support for omap musb glue Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-07-10  7:14   ` Gupta, Ajay Kumar
2012-07-10  7:14     ` Gupta, Ajay Kumar
2012-06-28 11:51 ` [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
     [not found]   ` <1340884267-28908-11-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2012-07-10  6:27     ` Rajendra Nayak [this message]
2012-07-10  6:27       ` Rajendra Nayak
2012-07-10  6:27       ` Rajendra Nayak
2012-07-10  8:13       ` ABRAHAM, KISHON VIJAY
2012-07-10  8:13         ` ABRAHAM, KISHON VIJAY
2012-07-10  8:13         ` ABRAHAM, KISHON VIJAY
2012-07-10  8:32         ` Rajendra Nayak
2012-07-10  8:32           ` Rajendra Nayak
2012-06-28 11:51 ` [PATCH v1 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-06-28 11:51   ` Kishon Vijay Abraham I
2012-07-10  6:29   ` Rajendra Nayak
2012-07-10  6:29     ` Rajendra Nayak
2012-07-10  8:16     ` ABRAHAM, KISHON VIJAY
2012-07-10  8:16       ` ABRAHAM, KISHON VIJAY
2012-07-10  8:33       ` Rajendra Nayak
2012-07-10  8:33         ` Rajendra Nayak
2012-07-10  8:33         ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FFBCB39.1010809@ti.com \
    --to=rnayak-l0cymroini0@public.gmane.org \
    --cc=balbi-l0cyMroinI0@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
    --cc=kishon-l0cyMroinI0@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.