[ath9k-devel] Ubnt rs pro ar9220 ath9k driver

[hongjianli.nudt@gmail.com]

Thank you for your reply.
But I can't config it in AP mode. 
root at OpenWrt:/# iw dev wlan0 set type ap
See http://wireless.kernel.org/RTFM-AP.

and how do I config it in AP mode? (RS pro and ar9220 chipset)

2010-03-03 






???? xxiao 
????? 2010-03-03  22:25:00 
???? ath9k-devel; hongjianli.nudt 
??? 
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver 
 
You're running ad-hoc mode, I have never seen that supports 11N HT speed,  though you can easily get 11n/HT under AP/STA scenario.

xxiao

--- On Wed, 3/3/10, hongjianli.nudt at gmail.com <hongjianli.nudt@gmail.com> wrote:


From: hongjianli.nudt@gmail.com <hongjianli.nudt@gmail.com>
Subject: Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
To: "ath9k-devel" <ath9k-devel@lists.ath9k.org>
Date: Wednesday, March 3, 2010, 1:07 AM


there are 2 RS pro with ar9220 interface.
wlan0     IEEE 802.11abgn  ESSID:"test"  
          Mode:Ad-Hoc  Frequency:2.427 GHz  Cell: 26:56:B1:2A:08:9C   
          Tx-Power=20 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off

node 2:
wlan0     IEEE 802.11abgn  ESSID:"test"  
          Mode:Ad-Hoc  Frequency:2.427 GHz  Cell: 26:56:B1:2A:08:9C   
          Tx-Power=20 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off

But the result of iperf is 
root at OpenWrt:/# iperf -c 192.168.11.10 -i 5 -t 500
------------------------------------------------------------
Client connecting to 192.168.11.10, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.11.20 port 51512 connected with 192.168.11.10 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 5.0 sec  10.3 MBytes  17.4 Mbits/sec
[ ID] Interval       Transfer     Bandwidth
[  3]  5.0-10.0 sec  9.36 MBytes  15.7 Mbits/sec
[ ID] Interval       Transfer     Bandwidth
[  3] 10.0-15.0 sec  9.08 MBytes  15.2 Mbits/sec


May I miss something? 


2010-03-03 






???? Pavel Roskin 
????? 2010-03-03  12:01:45 
???? hongjianli.nudt 
??? ath9k-devel 
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver 
On Tue, 2010-03-02 at 23:56 +0800, hongjianli.nudt at gmail.com wrote:
> Hi list,
> I'm using the UBNT RS pro with ar9220 interface. Is there anyone to
> run it in 802.11n mode? or give me some hints, Thank you!
I tested Ubiquti SR71-12 in 802.11n mode with no problems.  It's also
AR9220 based.
It's better that you describe the problem rather than look for somebody
who has exactly the same hardware and knows what you are talking about.
-- 
Regards,
Pavel Roskin

-----Inline Attachment Follows-----


_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100303/0177481a/attachment-0001.htm