From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Xen Devel <xen-devel@lists.xensource.com>,
Andi Kleen <andi@firstfloor.org>
Subject: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Date: Sun, 07 Sep 2008 15:21:13 -0700 [thread overview]
Message-ID: <4d93ba619c716c45cca0.1220826073@localhost> (raw)
In-Reply-To: <patchbomb.1220826072@localhost>
Use one of the software-defined PTE bits to indicate that a mapping is
intended for an IO address. On native hardware this is irrelevent,
since a physical address is a physical address. But in a virtual
environment, physical addresses are also virtualized, so there needs
to be some way to distinguish between pseudo-physical addresses and
actual hardware addresses; _PAGE_IOMAP indicates this intent.
By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't
even appear in the final pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
arch/x86/mm/init_32.c | 2 +-
arch/x86/mm/init_64.c | 2 +-
arch/x86/mm/ioremap.c | 8 ++++----
include/asm-x86/fixmap.h | 2 +-
include/asm-x86/pgtable.h | 14 ++++++++++++--
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -503,7 +503,7 @@
int nx_enabled;
-pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL);
+pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
EXPORT_SYMBOL_GPL(__supported_pte_mask);
#ifdef CONFIG_X86_PAE
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -88,7 +88,7 @@
int after_bootmem;
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
+pteval_t __supported_pte_mask __read_mostly = ~_PAGE_IOMAP;
EXPORT_SYMBOL_GPL(__supported_pte_mask);
static int do_not_nx __cpuinitdata;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -223,16 +223,16 @@
switch (prot_val) {
case _PAGE_CACHE_UC:
default:
- prot = PAGE_KERNEL_NOCACHE;
+ prot = PAGE_KERNEL_IO_NOCACHE;
break;
case _PAGE_CACHE_UC_MINUS:
- prot = PAGE_KERNEL_UC_MINUS;
+ prot = PAGE_KERNEL_IO_UC_MINUS;
break;
case _PAGE_CACHE_WC:
- prot = PAGE_KERNEL_WC;
+ prot = PAGE_KERNEL_IO_WC;
break;
case _PAGE_CACHE_WB:
- prot = PAGE_KERNEL;
+ prot = PAGE_KERNEL_IO;
break;
}
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -15,7 +15,7 @@
#define _PAGE_BIT_PAT 7 /* on 4KB pages */
#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */
#define _PAGE_BIT_UNUSED1 9 /* available for programmer */
-#define _PAGE_BIT_UNUSED2 10
+#define _PAGE_BIT_IOMAP 10 /* flag used to indicate IO mapping */
#define _PAGE_BIT_HIDDEN 11 /* hidden by kmemcheck */
#define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */
#define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1
@@ -32,7 +32,7 @@
#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE)
#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
-#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2)
+#define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
#define _PAGE_HIDDEN (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)
#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
@@ -99,6 +99,11 @@
#define __PAGE_KERNEL_LARGE_NOCACHE (__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+#define __PAGE_KERNEL_IO (__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS (__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC (__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
@@ -112,6 +117,11 @@
#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL)
#define PAGE_KERNEL_VSYSCALL_NOCACHE __pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO __pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE __pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS __pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC __pgprot(__PAGE_KERNEL_IO_WC)
/* xwr */
#define __P000 PAGE_NONE
next prev parent reply other threads:[~2008-09-07 22:24 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-07 22:21 [PATCH 0 of 7] x86: lay groundwork for Xen domain 0 support Jeremy Fitzhardinge
2008-09-07 22:21 ` Jeremy Fitzhardinge [this message]
2008-09-09 13:32 ` [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings Avi Kivity
2008-09-09 13:32 ` Avi Kivity
2008-09-09 14:47 ` Jeremy Fitzhardinge
2008-09-09 14:47 ` Jeremy Fitzhardinge
2008-09-09 14:56 ` Avi Kivity
2008-09-09 14:56 ` Avi Kivity
2008-09-09 15:29 ` [Xen-devel] " Keir Fraser
2008-09-09 15:29 ` Keir Fraser
2008-09-09 15:48 ` [Xen-devel] " Jeremy Fitzhardinge
2008-09-09 15:48 ` Jeremy Fitzhardinge
2008-09-09 16:05 ` [Xen-devel] " Keir Fraser
2008-09-09 16:05 ` Keir Fraser
2008-09-10 9:55 ` [Xen-devel] " Avi Kivity
2008-09-10 9:55 ` Avi Kivity
2008-09-10 16:38 ` [Xen-devel] " Jeremy Fitzhardinge
2008-09-10 16:38 ` Jeremy Fitzhardinge
2008-09-10 16:55 ` [Xen-devel] " Nick Piggin
2008-09-10 17:27 ` Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 2 of 7] x86: remove duplicate early_ioremap declarations Jeremy Fitzhardinge
2008-09-07 22:21 ` Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 3 of 7] x86: add early_memremap() Jeremy Fitzhardinge
2008-09-07 22:21 ` Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 4 of 7] x86: use early_memremap() in setup.c Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 5 of 7] x86-64: don't check for map replacement Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table Jeremy Fitzhardinge
2008-09-07 23:44 ` Andi Kleen
2008-09-08 0:03 ` Jeremy Fitzhardinge
2008-09-08 0:03 ` Jeremy Fitzhardinge
2008-09-08 14:26 ` Ingo Molnar
2008-09-08 14:26 ` Ingo Molnar
2008-09-08 16:29 ` Jeremy Fitzhardinge
2008-09-08 16:29 ` Jeremy Fitzhardinge
2008-09-08 19:41 ` Jeremy Fitzhardinge
2008-09-08 19:41 ` Jeremy Fitzhardinge
2008-09-10 11:55 ` Ingo Molnar
2008-09-10 16:49 ` Jeremy Fitzhardinge
2008-09-11 7:33 ` Ingo Molnar
2008-09-11 18:36 ` Jeremy Fitzhardinge
2008-09-11 18:56 ` Ingo Molnar
2008-09-11 20:34 ` Yinghai Lu
2008-09-11 21:07 ` Jeremy Fitzhardinge
2008-09-12 9:49 ` Ingo Molnar
2008-09-12 17:31 ` Yinghai Lu
[not found] ` <20080911125748.GA14698@elte.hu>
2008-09-11 21:33 ` [PATCH] acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap Jeremy Fitzhardinge
2008-09-07 22:21 ` [PATCH 7 of 7] x86: always explicitly map acpi memory Jeremy Fitzhardinge
2008-09-07 23:35 ` [Xen-devel] " Yinghai Lu
2008-09-07 23:35 ` Yinghai Lu
2008-09-08 0:02 ` [Xen-devel] " Jeremy Fitzhardinge
2008-09-08 0:02 ` Jeremy Fitzhardinge
2008-09-08 0:14 ` [Xen-devel] " Yinghai Lu
2008-09-08 0:14 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d93ba619c716c45cca0.1220826073@localhost \
--to=jeremy@goop.org \
--cc=andi@firstfloor.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.