Re: [PATCH v2 7/7] arm64: dts: qcom: sm8250: add interconnect nodes

[Sibi Sankar <sibis@codeaurora.org>]

On 2020-07-24 20:06, Jonathan Marek wrote:
> On 7/24/20 10:13 AM, Sibi Sankar wrote:
>> Hey Jonathan,
>> 
>> Thanks for the patch! Please use the
>> suggested register space definitions
>> instead.
>> 
> 
> Thanks for the suggestions, I was unsure what to use for the sizes.
> The reg field is unused by the upstream driver so it is hard to figure
> out.
> 
> However, I'm not sure about some of your suggestions for the base
> address. For example, for "mc_virt" you suggest 0x0163d000, and I have
> 0x09100000. In the downstream dts, "mc_virt-base" is 0x9100000 and
> qcom,base-offset for fab_mc_virt is 0. Do you have an explanation for
> why your suggestion is so different?

AFAIK for providers with virt suffix the
register space definition is just an
arbitrary choice and doesn't matter.
Since mc_virt was just re-using gem_noc
address space I suggested we stick to
how it was done on sc7180 i.e place it
between system_noc and aggre1_noc.

> 
>> On 2020-07-13 21:11, Jonathan Marek wrote:
>>> Add the interconnect dts nodes for sm8250.
>>> 
>>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>>> ---
>>>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 82 
>>> ++++++++++++++++++++++++++++
>>>  1 file changed, 82 insertions(+)
>>> 
>>> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
>>> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>>> index 636e2196138c..dfc1b7fa7d85 100644
>>> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>>> @@ -11,6 +11,7 @@
>>>  #include <dt-bindings/power/qcom-aoss-qmp.h>
>>>  #include <dt-bindings/power/qcom-rpmpd.h>
>>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +#include <dt-bindings/interconnect/qcom,sm8250.h>
>> 
>> please fix ^^ sort order
>> 
>>> 
>>>  / {
>>>      interrupt-parent = <&intc>;
>>> @@ -978,6 +979,55 @@ spi13: spi@a94000 {
>>>              };
>>>          };
>>> 
>>> +        config_noc: interconnect@1500000 {
>>> +            compatible = "qcom,sm8250-config-noc";
>>> +            reg = <0 0x01500000 0 0x1000>;
>> 
>> 0x01500000 0xa580
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        ipa_virt: interconnect@1620000 {
>>> +            compatible = "qcom,sm8250-ipa-virt";
>>> +            reg = <0 0x01620000 0 0x1000>;
>> 
>> 0x01e00000 0x1000
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        system_noc: interconnect@1632000 {
>>> +            compatible = "qcom,sm8250-system-noc";
>>> +            reg = <0 0x01632000 0 0x1000>;
>> 
>> 0x01620000 0x1C200
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        aggre1_noc: interconnect@16e2000 {
>>> +            compatible = "qcom,sm8250-aggre1-noc";
>>> +            reg = <0 0x016e2000 0 0x1000>;
>> 
>> 0x016e0000 0x1f180
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        aggre2_noc: interconnect@1703000 {
>>> +            compatible = "qcom,sm8250-aggre2-noc";
>>> +            reg = <0 0x01703000 0 0x1000>;
>> 
>> 0x01700000 0x33000
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        compute_noc: interconnect@1733000 {
>>> +            compatible = "qcom,sm8250-compute-noc";
>>> +            reg = <0 0x01733000 0 0x1000>;
>> 
>> 0x01733000 0xd180
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        mmss_noc: interconnect@174a000 {
>>> +            compatible = "qcom,sm8250-mmss-noc";
>>> +            reg = <0 0x0174a000 0 0x1000>;
>> 
>> 0x01740000 0x1f080
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>>          ufs_mem_hc: ufshc@1d84000 {
>>>              compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
>>>                       "jedec,ufs-2.0";
>>> @@ -1364,6 +1414,34 @@ usb_2_ssphy: lane@88eb200 {
>>>              };
>>>          };
>>> 
>>> +        dc_noc: interconnect@90c0000 {
>>> +            compatible = "qcom,sm8250-dc-noc";
>>> +            reg = <0 0x090c0000 0 0x1000>;
>> 
>> 0x090c0000 0x4200
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        mc_virt: interconnect@9100000 {
>>> +            compatible = "qcom,sm8250-mc-virt";
>>> +            reg = <0 0x09100000 0 0x1000>;
>> 
>> 0x0163d000 0x1000
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        gem_noc: interconnect@9121000 {
>>> +            compatible = "qcom,sm8250-gem-noc";
>>> +            reg = <0 0x09121000 0 0x1000>;
>> 
>> 0x09100000 0xb4000
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>> +        npu_noc: interconnect@9990000 {
>>> +            compatible = "qcom,sm8250-npu-noc";
>>> +            reg = <0 0x09990000 0 0x1000>;
>> 
>> 0x09990000 0x1600
>> 
>>> +            #interconnect-cells = <1>;
>>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>>> +        };
>>> +
>>>          usb_1: usb@a6f8800 {
>>>              compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
>>>              reg = <0 0x0a6f8800 0 0x400>;
>>> @@ -2359,6 +2437,10 @@ rpmhpd_opp_turbo_l1: opp10 {
>>>                      };
>>>                  };
>>>              };
>>> +
>>> +            apps_bcm_voter: bcm_voter {
>>> +                compatible = "qcom,bcm-voter";
>>> +            };
>>>          };
>>>      };
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.