All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm-owner@vger.kernel.org
Subject: Re: [PATCH v2 6/7] arm64: dts: qcom: sm8150: add interconnect nodes
Date: Fri, 24 Jul 2020 19:43:07 +0530	[thread overview]
Message-ID: <c0660973fc5235f402f7ce9cb404fd35@codeaurora.org> (raw)
In-Reply-To: <20200713154121.22094-7-jonathan@marek.ca>

Hey Jonathan,

Thanks for the patch! Please use the
suggested register space definitions
instead.

On 2020-07-13 21:11, Jonathan Marek wrote:
> Add the interconnect dts nodes for sm8150.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 82 ++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 33ff99132f4f..fa9cd9d60093 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,gcc-sm8150.h>
>  #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
> +#include <dt-bindings/interconnect/qcom,sm8150.h>
>  #include <dt-bindings/thermal/thermal.h>
> 
>  / {
> @@ -440,6 +441,69 @@ uart2: serial@a90000 {
>  			};
>  		};
> 
> +		dc_noc: interconnect@14e0000 {
> +			compatible = "qcom,sm8150-dc-noc";
> +			reg = <0 0x014e0000 0 0x1000>;

0x09160000 0x3200

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		config_noc: interconnect@1500000 {
> +			compatible = "qcom,sm8150-config-noc";
> +			reg = <0 0x01500000 0 0x1000>;

0x01500000 0x7400

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		camnoc_virt: interconnect@1620000 {
> +			compatible = "qcom,sm8150-camnoc-virt";
> +			reg = <0 0x01620000 0 0x1000>;

0x0ac00000 0x1000

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		ipa_virt: interconnect-ipa@1620000 {
> +			compatible = "qcom,sm8150-ipa-virt";
> +			reg = <0 0x01620000 0 0x1000>;

0x01e00000 0x1000

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		system_noc: interconnect@1629000 {
> +			compatible = "qcom,sm8150-system-noc";
> +			reg = <0 0x01500000 0 0x1000>;

0x01620000 0x19400

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre1_noc: interconnect@16e4000 {
> +			compatible = "qcom,sm8150-aggre1-noc";
> +			reg = <0 0x016e4000 0 0x1000>;

0x016e0000 0xd080

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre2_noc: interconnect@1706000 {
> +			compatible = "qcom,sm8150-aggre2-noc";
> +			reg = <0 0x01706000 0 0x1000>;

0x01700000 0x3b100

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		compute_noc: interconnect@1720000 {
> +			compatible = "qcom,sm8150-compute-noc";
> +			reg = <0 0x01720000 0 0x1000>;

0x01720000 0x7000

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		mmss_noc: interconnect@1749000 {
> +			compatible = "qcom,sm8150-mmss-noc";
> +			reg = <0 0x01749000 0 0x1000>;

0x01740000 0x1c100

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
>  		ufs_mem_hc: ufshc@1d84000 {
>  			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
>  				     "jedec,ufs-2.0";
> @@ -860,6 +924,20 @@ usb_2_ssphy: lane@88eb200 {
>  			};
>  		};
> 
> +		mc_virt: interconnect@9680000 {
> +			compatible = "qcom,sm8150-mc-virt";
> +			reg = <0 0x09680000 0 0x1000>;

0x0163a000 0x1000

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		gem_noc: interconnect@96ab000 {
> +			compatible = "qcom,sm8150-gem-noc";
> +			reg = <0 0x096ab000 0 0x1000>;

0x09680000 0x3e200

> +			#interconnect-cells = <1>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
>  		usb_1: usb@a6f8800 {
>  			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
>  			reg = <0 0x0a6f8800 0 0x400>;
> @@ -1280,6 +1358,10 @@ rpmhpd_opp_turbo_l1: opp11 {
>  					};
>  				};
>  			};
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,bcm-voter";
> +			};
>  		};
> 
>  		cpufreq_hw: cpufreq@18323000 {

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

  reply	other threads:[~2020-07-24 14:13 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-13 15:41 [PATCH v2 0/7] Add SM8150 and SM8250 interconnect drivers Jonathan Marek
2020-07-13 15:41 ` [PATCH v2 1/7] dt-bindings: interconnect: single yaml file for RPMh " Jonathan Marek
2020-07-14 17:23   ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 2/7] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings Jonathan Marek
2020-07-16 19:22   ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 3/7] dt-bindings: interconnect: Add Qualcomm SM8250 " Jonathan Marek
2020-07-16 19:22   ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 4/7] interconnect: qcom: Add SM8150 interconnect provider driver Jonathan Marek
2020-07-24 14:29   ` Sibi Sankar
2020-07-13 15:41 ` [PATCH v2 5/7] interconnect: qcom: Add SM8250 " Jonathan Marek
2020-07-24 14:29   ` Sibi Sankar
2020-07-13 15:41 ` [PATCH v2 6/7] arm64: dts: qcom: sm8150: add interconnect nodes Jonathan Marek
2020-07-24 14:13   ` Sibi Sankar [this message]
2020-07-13 15:41 ` [PATCH v2 7/7] arm64: dts: qcom: sm8250: " Jonathan Marek
2020-07-24 14:13   ` Sibi Sankar
2020-07-24 14:36     ` Jonathan Marek
2020-07-24 16:55       ` Sibi Sankar
2020-07-28  2:43         ` Jonathan Marek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c0660973fc5235f402f7ce9cb404fd35@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.