From: Sibi Sankar <sibis@codeaurora.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v2 7/7] arm64: dts: qcom: sm8250: add interconnect nodes
Date: Fri, 24 Jul 2020 19:43:17 +0530 [thread overview]
Message-ID: <630319740d3f06cfb0435cae025e0ca1@codeaurora.org> (raw)
In-Reply-To: <20200713154121.22094-8-jonathan@marek.ca>
Hey Jonathan,
Thanks for the patch! Please use the
suggested register space definitions
instead.
On 2020-07-13 21:11, Jonathan Marek wrote:
> Add the interconnect dts nodes for sm8250.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 82 ++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 636e2196138c..dfc1b7fa7d85 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -11,6 +11,7 @@
> #include <dt-bindings/power/qcom-aoss-qmp.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/interconnect/qcom,sm8250.h>
please fix ^^ sort order
>
> / {
> interrupt-parent = <&intc>;
> @@ -978,6 +979,55 @@ spi13: spi@a94000 {
> };
> };
>
> + config_noc: interconnect@1500000 {
> + compatible = "qcom,sm8250-config-noc";
> + reg = <0 0x01500000 0 0x1000>;
0x01500000 0xa580
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + ipa_virt: interconnect@1620000 {
> + compatible = "qcom,sm8250-ipa-virt";
> + reg = <0 0x01620000 0 0x1000>;
0x01e00000 0x1000
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + system_noc: interconnect@1632000 {
> + compatible = "qcom,sm8250-system-noc";
> + reg = <0 0x01632000 0 0x1000>;
0x01620000 0x1C200
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre1_noc: interconnect@16e2000 {
> + compatible = "qcom,sm8250-aggre1-noc";
> + reg = <0 0x016e2000 0 0x1000>;
0x016e0000 0x1f180
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre2_noc: interconnect@1703000 {
> + compatible = "qcom,sm8250-aggre2-noc";
> + reg = <0 0x01703000 0 0x1000>;
0x01700000 0x33000
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + compute_noc: interconnect@1733000 {
> + compatible = "qcom,sm8250-compute-noc";
> + reg = <0 0x01733000 0 0x1000>;
0x01733000 0xd180
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mmss_noc: interconnect@174a000 {
> + compatible = "qcom,sm8250-mmss-noc";
> + reg = <0 0x0174a000 0 0x1000>;
0x01740000 0x1f080
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> ufs_mem_hc: ufshc@1d84000 {
> compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
> "jedec,ufs-2.0";
> @@ -1364,6 +1414,34 @@ usb_2_ssphy: lane@88eb200 {
> };
> };
>
> + dc_noc: interconnect@90c0000 {
> + compatible = "qcom,sm8250-dc-noc";
> + reg = <0 0x090c0000 0 0x1000>;
0x090c0000 0x4200
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect@9100000 {
> + compatible = "qcom,sm8250-mc-virt";
> + reg = <0 0x09100000 0 0x1000>;
0x0163d000 0x1000
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + gem_noc: interconnect@9121000 {
> + compatible = "qcom,sm8250-gem-noc";
> + reg = <0 0x09121000 0 0x1000>;
0x09100000 0xb4000
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + npu_noc: interconnect@9990000 {
> + compatible = "qcom,sm8250-npu-noc";
> + reg = <0 0x09990000 0 0x1000>;
0x09990000 0x1600
> + #interconnect-cells = <1>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> usb_1: usb@a6f8800 {
> compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
> reg = <0 0x0a6f8800 0 0x400>;
> @@ -2359,6 +2437,10 @@ rpmhpd_opp_turbo_l1: opp10 {
> };
> };
> };
> +
> + apps_bcm_voter: bcm_voter {
> + compatible = "qcom,bcm-voter";
> + };
> };
> };
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-07-24 14:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 15:41 [PATCH v2 0/7] Add SM8150 and SM8250 interconnect drivers Jonathan Marek
2020-07-13 15:41 ` [PATCH v2 1/7] dt-bindings: interconnect: single yaml file for RPMh " Jonathan Marek
2020-07-14 17:23 ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 2/7] dt-bindings: interconnect: Add Qualcomm SM8150 DT bindings Jonathan Marek
2020-07-16 19:22 ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 3/7] dt-bindings: interconnect: Add Qualcomm SM8250 " Jonathan Marek
2020-07-16 19:22 ` Rob Herring
2020-07-13 15:41 ` [PATCH v2 4/7] interconnect: qcom: Add SM8150 interconnect provider driver Jonathan Marek
2020-07-24 14:29 ` Sibi Sankar
2020-07-13 15:41 ` [PATCH v2 5/7] interconnect: qcom: Add SM8250 " Jonathan Marek
2020-07-24 14:29 ` Sibi Sankar
2020-07-13 15:41 ` [PATCH v2 6/7] arm64: dts: qcom: sm8150: add interconnect nodes Jonathan Marek
2020-07-24 14:13 ` Sibi Sankar
2020-07-13 15:41 ` [PATCH v2 7/7] arm64: dts: qcom: sm8250: " Jonathan Marek
2020-07-24 14:13 ` Sibi Sankar [this message]
2020-07-24 14:36 ` Jonathan Marek
2020-07-24 16:55 ` Sibi Sankar
2020-07-28 2:43 ` Jonathan Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=630319740d3f06cfb0435cae025e0ca1@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel-owner@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.