From: Jon Hunter <jon-hunter@ti.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>, Benoit Cousson <b-cousson@ti.com>,
Ming Lei <ming.lei@canonical.com>,
Will Deacon <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use
Date: Wed, 1 Aug 2012 14:41:34 -0500 [thread overview]
Message-ID: <5019866E.3000100@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1208010932270.21488@utopia.booyaka.com>
Hi Paul,
On 08/01/2012 10:36 AM, Paul Walmsley wrote:
> Hi Jon et al,
>
> Here's what I'm planning to queue here. The only changes from what Jon
> posted are the patch changelog and some checkpatch fixes. If anyone
> has any final comments, please let me know.
>
>
> - Paul
>
> From: Paul Walmsley <paul@pwsan.com>
> Date: Wed, 1 Aug 2012 09:11:20 -0600
> Subject: [PATCH] ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU
> clockdomain idle problems
>
> The idle status of the IP blocks and clocks inside the EMU clockdomain
> isn't taken into account by the PRCM hardware when deciding whether
> the clockdomain is idle. Add a workaround flag in the clockdomain
> code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add
> the code necessary to support it.
>
> If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the
> clockdomain will be forced active whenever an IP block inside that
> clockdomain is in use, even if the clockdomain supports
> hardware-supervised idle. When the kernel indicates that the last
> active IP block inside the clockdomain is no longer used, the
> clockdomain will be forced idle, or, if that mode is not supported in
> the hardware, it will be placed into hardware-supervised idle.
>
> This patch is an equal collaboration with Jon Hunter
> <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon
> <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman
> <khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh
> Shilimkar <santosh.shilimkar@ti.com> all made essential contributions
> to the understanding of EMU clockdomain power management on OMAP.
>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
Thanks for sending out. You can add my ...
Tested-by: Jon Hunter <jon-hunter@ti.com>
I have tested this on omap3430 (beagle), omap4430 (blaze) and omap4460
(panda) with perf and my PMU series [1]. I have verified that the EMU
power domain is transitioning correctly on these platforms. For OMAP3430
I checked that CORE retention is still being achieved with this change.
Cheers
Jon
[1] git@gitorious.org:linux-omap-dev/linux-omap-dev.git -b dev-pmu
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: jon-hunter@ti.com (Jon Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use
Date: Wed, 1 Aug 2012 14:41:34 -0500 [thread overview]
Message-ID: <5019866E.3000100@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.00.1208010932270.21488@utopia.booyaka.com>
Hi Paul,
On 08/01/2012 10:36 AM, Paul Walmsley wrote:
> Hi Jon et al,
>
> Here's what I'm planning to queue here. The only changes from what Jon
> posted are the patch changelog and some checkpatch fixes. If anyone
> has any final comments, please let me know.
>
>
> - Paul
>
> From: Paul Walmsley <paul@pwsan.com>
> Date: Wed, 1 Aug 2012 09:11:20 -0600
> Subject: [PATCH] ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU
> clockdomain idle problems
>
> The idle status of the IP blocks and clocks inside the EMU clockdomain
> isn't taken into account by the PRCM hardware when deciding whether
> the clockdomain is idle. Add a workaround flag in the clockdomain
> code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add
> the code necessary to support it.
>
> If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the
> clockdomain will be forced active whenever an IP block inside that
> clockdomain is in use, even if the clockdomain supports
> hardware-supervised idle. When the kernel indicates that the last
> active IP block inside the clockdomain is no longer used, the
> clockdomain will be forced idle, or, if that mode is not supported in
> the hardware, it will be placed into hardware-supervised idle.
>
> This patch is an equal collaboration with Jon Hunter
> <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon
> <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman
> <khilman@ti.com>, Beno?t Cousson <b-cousson@ti.com>, and Santosh
> Shilimkar <santosh.shilimkar@ti.com> all made essential contributions
> to the understanding of EMU clockdomain power management on OMAP.
>
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
Thanks for sending out. You can add my ...
Tested-by: Jon Hunter <jon-hunter@ti.com>
I have tested this on omap3430 (beagle), omap4430 (blaze) and omap4460
(panda) with perf and my PMU series [1]. I have verified that the EMU
power domain is transitioning correctly on these platforms. For OMAP3430
I checked that CORE retention is still being achieved with this change.
Cheers
Jon
[1] git at gitorious.org:linux-omap-dev/linux-omap-dev.git -b dev-pmu
next prev parent reply other threads:[~2012-08-01 19:41 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-07 21:22 [PATCH V2 00/10] ARM: OMAP4: Add PMU Support Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 01/10] ARM: PMU: Add runtime PM Support Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-08 9:47 ` Will Deacon
2012-06-08 9:47 ` Will Deacon
2012-06-08 14:17 ` Jon Hunter
2012-06-08 14:17 ` Jon Hunter
2012-06-08 15:24 ` Jon Hunter
2012-06-08 15:24 ` Jon Hunter
2012-06-11 17:39 ` Will Deacon
2012-06-11 17:39 ` Will Deacon
2012-06-11 19:01 ` Jon Hunter
2012-06-11 19:01 ` Jon Hunter
2012-06-12 9:28 ` Will Deacon
2012-06-12 9:28 ` Will Deacon
2012-06-12 21:17 ` Jon Hunter
2012-06-12 21:17 ` Jon Hunter
2012-06-12 21:31 ` Will Deacon
2012-06-12 21:31 ` Will Deacon
2012-06-12 22:41 ` Jon Hunter
2012-06-12 22:41 ` Jon Hunter
2012-07-02 9:55 ` Will Deacon
2012-07-02 9:55 ` Will Deacon
2012-07-02 16:50 ` Jon Hunter
2012-07-02 16:50 ` Jon Hunter
2012-07-02 22:01 ` Will Deacon
2012-07-02 22:01 ` Will Deacon
2012-07-06 0:40 ` Jon Hunter
2012-07-06 0:40 ` Jon Hunter
2012-07-26 0:41 ` Jon Hunter
2012-07-26 0:41 ` Jon Hunter
2012-07-26 15:05 ` Will Deacon
2012-07-26 15:05 ` Will Deacon
2012-07-26 15:16 ` Jon Hunter
2012-07-26 15:16 ` Jon Hunter
2012-07-31 15:14 ` Will Deacon
2012-07-31 15:14 ` Will Deacon
2012-07-31 23:07 ` Jon Hunter
2012-07-31 23:07 ` Jon Hunter
2012-08-01 20:47 ` Will Deacon
2012-08-01 20:47 ` Will Deacon
2012-08-01 22:34 ` Jon Hunter
2012-08-01 22:34 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 02/10] ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 03/10] ARM: OMAP4: Re-map the CTIs IRQs from MPU to DEBUGSS Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-13 6:07 ` Pandita, Vikram
2012-06-13 6:07 ` Pandita, Vikram
2012-06-13 6:13 ` Pandita, Vikram
2012-06-13 6:13 ` Pandita, Vikram
2012-06-13 6:19 ` Shilimkar, Santosh
2012-06-13 6:19 ` Shilimkar, Santosh
2012-06-07 21:22 ` [PATCH V2 04/10] ARM: OMAP4430: Create PMU device via HWMOD Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 05/10] ARM: OMAP2+: PMU: Add runtime PM support Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 06/10] ARM: OMAP4: Route PMU IRQs to CTI IRQs Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 07/10] ARM: OMAP4: CLKDM: Update supported transition modes Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-07-04 15:38 ` Paul Walmsley
2012-07-04 15:38 ` Paul Walmsley
2012-07-05 17:14 ` Jon Hunter
2012-07-05 17:14 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 08/10] ARM: OMAP4: Prevent EMU power domain transitioning to OFF when in-use Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-07-12 21:17 ` Paul Walmsley
2012-07-12 21:17 ` Paul Walmsley
2012-07-13 13:54 ` Jon Hunter
2012-07-13 13:54 ` Jon Hunter
2012-07-13 14:00 ` Will Deacon
2012-07-13 14:00 ` Will Deacon
2012-07-13 14:07 ` Jon Hunter
2012-07-13 14:07 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-13 21:00 ` Paul Walmsley
2012-07-13 21:00 ` Paul Walmsley
2012-07-16 18:27 ` Jon Hunter
2012-07-16 18:27 ` Jon Hunter
2012-07-16 18:38 ` Paul Walmsley
2012-07-16 18:38 ` Paul Walmsley
2012-07-16 19:38 ` Jon Hunter
2012-07-16 19:38 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-20 22:24 ` Jon Hunter
2012-07-30 23:26 ` Jon Hunter
2012-07-30 23:26 ` Jon Hunter
2012-07-31 4:36 ` Jon Hunter
2012-07-31 4:36 ` Jon Hunter
2012-07-31 18:16 ` Jon Hunter
2012-07-31 18:16 ` Jon Hunter
2012-08-01 0:20 ` Jon Hunter
2012-08-01 0:20 ` Jon Hunter
2012-08-01 15:08 ` Paul Walmsley
2012-08-01 15:08 ` Paul Walmsley
2012-08-01 18:17 ` Jon Hunter
2012-08-01 18:17 ` Jon Hunter
2012-08-01 15:36 ` Paul Walmsley
2012-08-01 15:36 ` Paul Walmsley
2012-08-01 19:41 ` Jon Hunter [this message]
2012-08-01 19:41 ` Jon Hunter
2012-08-02 7:34 ` Shilimkar, Santosh
2012-08-02 7:34 ` Shilimkar, Santosh
2012-10-08 22:24 ` Jon Hunter
2012-10-08 22:24 ` Jon Hunter
2012-10-09 4:41 ` Paul Walmsley
2012-10-09 4:41 ` Paul Walmsley
2012-07-31 20:56 ` Jon Hunter
2012-07-31 20:56 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 09/10] ARM: OMAP4: Enable PMU for OMAP4460/70 Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 21:22 ` [PATCH V2 10/10] ARM: OMAP2+: PMU: Add QoS constraint Jon Hunter
2012-06-07 21:22 ` Jon Hunter
2012-06-07 23:36 ` [PATCH V2 00/10] ARM: OMAP4: Add PMU Support Jon Hunter
2012-06-07 23:36 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5019866E.3000100@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=ming.lei@canonical.com \
--cc=mvij@ti.com \
--cc=paul@pwsan.com \
--cc=santosh.shilimkar@ti.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.