* [U-Boot] [PATCH] mxc_spi: Round up clock divider [not found] <797579011.2281948.1344624706885.JavaMail.root@advansee.com> @ 2012-08-10 18:51 ` Benoît Thébaudeau 2012-08-11 10:37 ` Stefano Babic 2012-08-20 7:54 ` Stefano Babic 0 siblings, 2 replies; 4+ messages in thread From: Benoît Thébaudeau @ 2012-08-10 18:51 UTC (permalink / raw) To: u-boot Since the input frequency of the API is a maximum that should not be exceeded in order for the devices to operate properly, the SPI clock divider should be rounded up, not truncated. Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> --- .../drivers/spi/mxc_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c u-boot-4d3c95f/drivers/spi/mxc_spi.c index 2e15318..cf1462f 100644 --- u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c +++ u-boot-4d3c95f/drivers/spi/mxc_spi.c @@ -96,7 +96,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, clk_src = mxc_get_clock(MXC_CSPI_CLK); - div = clk_src / max_hz; + div = DIV_ROUND_UP(clk_src, max_hz); div = get_cspi_div(div); debug("clk %d Hz, div %d, real clk %d Hz\n", @@ -147,7 +147,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, * The following computation is taken directly from Freescale's code. */ if (clk_src > max_hz) { - pre_div = clk_src / max_hz; + pre_div = DIV_ROUND_UP(clk_src, max_hz); if (pre_div > 16) { post_div = pre_div / 16; pre_div = 15; ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mxc_spi: Round up clock divider 2012-08-10 18:51 ` [U-Boot] [PATCH] mxc_spi: Round up clock divider Benoît Thébaudeau @ 2012-08-11 10:37 ` Stefano Babic 2012-08-11 14:23 ` Benoît Thébaudeau 2012-08-20 7:54 ` Stefano Babic 1 sibling, 1 reply; 4+ messages in thread From: Stefano Babic @ 2012-08-11 10:37 UTC (permalink / raw) To: u-boot On 10/08/2012 20:51, Beno?t Th?baudeau wrote: > Since the input frequency of the API is a maximum that should not be exceeded in > order for the devices to operate properly, the SPI clock divider should be > rounded up, not truncated. > Hi Beno?t, > Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com> > Cc: Wolfgang Denk <wd@denx.de> > Cc: Stefano Babic <sbabic@denx.de> > --- > .../drivers/spi/mxc_spi.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c u-boot-4d3c95f/drivers/spi/mxc_spi.c > index 2e15318..cf1462f 100644 > --- u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c > +++ u-boot-4d3c95f/drivers/spi/mxc_spi.c > @@ -96,7 +96,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, > > clk_src = mxc_get_clock(MXC_CSPI_CLK); > > - div = clk_src / max_hz; > + div = DIV_ROUND_UP(clk_src, max_hz); > div = get_cspi_div(div); > > debug("clk %d Hz, div %d, real clk %d Hz\n", > @@ -147,7 +147,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, > * The following computation is taken directly from Freescale's code. > */ > if (clk_src > max_hz) { > - pre_div = clk_src / max_hz; > + pre_div = DIV_ROUND_UP(clk_src, max_hz); > if (pre_div > 16) { > post_div = pre_div / 16; > pre_div = 15; > Agree - do you also get a case where the divider was too low and the SPI does not work or it was only examining the code ? Acked-by: Stefano Babic <sbabic@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mxc_spi: Round up clock divider 2012-08-11 10:37 ` Stefano Babic @ 2012-08-11 14:23 ` Benoît Thébaudeau 0 siblings, 0 replies; 4+ messages in thread From: Benoît Thébaudeau @ 2012-08-11 14:23 UTC (permalink / raw) To: u-boot Hi Stefano, On 08/11/2012 12:37, Stefano Babic wrote: > On 10/08/2012 20:51, Beno?t Th?baudeau wrote: > > Since the input frequency of the API is a maximum that should not > > be exceeded in > > order for the devices to operate properly, the SPI clock divider > > should be > > rounded up, not truncated. > > > > Hi Beno?t, > > > Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com> > > Cc: Wolfgang Denk <wd@denx.de> > > Cc: Stefano Babic <sbabic@denx.de> > > --- > > .../drivers/spi/mxc_spi.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c > > u-boot-4d3c95f/drivers/spi/mxc_spi.c > > index 2e15318..cf1462f 100644 > > --- u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c > > +++ u-boot-4d3c95f/drivers/spi/mxc_spi.c > > @@ -96,7 +96,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave > > *mxcs, unsigned int cs, > > > > clk_src = mxc_get_clock(MXC_CSPI_CLK); > > > > - div = clk_src / max_hz; > > + div = DIV_ROUND_UP(clk_src, max_hz); > > div = get_cspi_div(div); > > > > debug("clk %d Hz, div %d, real clk %d Hz\n", > > @@ -147,7 +147,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave > > *mxcs, unsigned int cs, > > * The following computation is taken directly from Freescale's > > code. > > */ > > if (clk_src > max_hz) { > > - pre_div = clk_src / max_hz; > > + pre_div = DIV_ROUND_UP(clk_src, max_hz); > > if (pre_div > 16) { > > post_div = pre_div / 16; > > pre_div = 15; > > > > Agree - do you also get a case where the divider was too low and the > SPI > does not work or it was only examining the code ? It was only examining the code. I had many clock issues on i.MX51, so I made a global review of clock usage that led to that. Most i.MX5 clock functions are broken. I have a series fixing these that I will post next week. > Acked-by: Stefano Babic <sbabic@denx.de> > > Best regards, > Stefano Babic Best regards, Beno?t ^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] [PATCH] mxc_spi: Round up clock divider 2012-08-10 18:51 ` [U-Boot] [PATCH] mxc_spi: Round up clock divider Benoît Thébaudeau 2012-08-11 10:37 ` Stefano Babic @ 2012-08-20 7:54 ` Stefano Babic 1 sibling, 0 replies; 4+ messages in thread From: Stefano Babic @ 2012-08-20 7:54 UTC (permalink / raw) To: u-boot On 10/08/2012 20:51, Beno?t Th?baudeau wrote: > Since the input frequency of the API is a maximum that should not be exceeded in > order for the devices to operate properly, the SPI clock divider should be > rounded up, not truncated. > > Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com> > Cc: Wolfgang Denk <wd@denx.de> > Cc: Stefano Babic <sbabic@denx.de> > --- > .../drivers/spi/mxc_spi.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c u-boot-4d3c95f/drivers/spi/mxc_spi.c > index 2e15318..cf1462f 100644 > --- u-boot-4d3c95f.orig/drivers/spi/mxc_spi.c > +++ u-boot-4d3c95f/drivers/spi/mxc_spi.c > @@ -96,7 +96,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, > > clk_src = mxc_get_clock(MXC_CSPI_CLK); > > - div = clk_src / max_hz; > + div = DIV_ROUND_UP(clk_src, max_hz); > div = get_cspi_div(div); > > debug("clk %d Hz, div %d, real clk %d Hz\n", > @@ -147,7 +147,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, > * The following computation is taken directly from Freescale's code. > */ > if (clk_src > max_hz) { > - pre_div = clk_src / max_hz; > + pre_div = DIV_ROUND_UP(clk_src, max_hz); > if (pre_div > 16) { > post_div = pre_div / 16; > pre_div = 15; > Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-08-20 7:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <797579011.2281948.1344624706885.JavaMail.root@advansee.com>
2012-08-10 18:51 ` [U-Boot] [PATCH] mxc_spi: Round up clock divider Benoît Thébaudeau
2012-08-11 10:37 ` Stefano Babic
2012-08-11 14:23 ` Benoît Thébaudeau
2012-08-20 7:54 ` Stefano Babic
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.