* Newbie question: Angstrom on at91sam9g20
@ 2012-08-29 17:25 Mateusz Nowaczyk
2012-08-30 8:03 ` Koen Kooi
0 siblings, 1 reply; 6+ messages in thread
From: Mateusz Nowaczyk @ 2012-08-29 17:25 UTC (permalink / raw)
To: openembedded-devel
Hi,
I've been using Angstrom 2011.03 (oe-classic) on a modified
at91sam9g20ek board. Unfortunately, it seems that it is no longer
updated - it contains obsolete version of dropbear (0.52) ect.
I tried switching to the new oe-core based version, but it lacks
adequate bsp layer.
I also tried manually changing the opkg.conf and installing packages
from
http://www.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base/
but it only caused more problems (can't login at all).
How can i get an up-to-date Angstrom for this architecture? Should I
stick to the classic OE and manually update recipies, or rather create a
bsp layer?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Newbie question: Angstrom on at91sam9g20
2012-08-29 17:25 Newbie question: Angstrom on at91sam9g20 Mateusz Nowaczyk
@ 2012-08-30 8:03 ` Koen Kooi
2012-08-30 14:22 ` Mateusz Nowaczyk
0 siblings, 1 reply; 6+ messages in thread
From: Koen Kooi @ 2012-08-30 8:03 UTC (permalink / raw)
To: openembedded-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Op 29-08-12 19:25, Mateusz Nowaczyk schreef:
> Hi, I've been using Angstrom 2011.03 (oe-classic) on a modified
> at91sam9g20ek board. Unfortunately, it seems that it is no longer updated
> - it contains obsolete version of dropbear (0.52) ect. I tried switching
> to the new oe-core based version, but it lacks adequate bsp layer. I also
> tried manually changing the opkg.conf and installing packages from
> http://www.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base/
>
>
but it only caused more problems (can't login at all).
> How can i get an up-to-date Angstrom for this architecture? Should I
> stick to the classic OE and manually update recipies, or rather create a
> bsp layer?
Create a bsp layer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
Comment: GPGTools - http://gpgtools.org
iD8DBQFQPx5TMkyGM64RGpERAm2rAJwNh1Pa3bVvObs/5xBbXCr143E0oQCeMMpT
DhVtDFKZ3TJ4TuFBMtsiXQg=
=f150
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Newbie question: Angstrom on at91sam9g20
2012-08-30 8:03 ` Koen Kooi
@ 2012-08-30 14:22 ` Mateusz Nowaczyk
2012-08-30 14:29 ` Paul Eggleton
0 siblings, 1 reply; 6+ messages in thread
From: Mateusz Nowaczyk @ 2012-08-30 14:22 UTC (permalink / raw)
To: openembedded-devel
On 30.08.2012 10:03, Koen Kooi wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Op 29-08-12 19:25, Mateusz Nowaczyk schreef:
>> Hi, I've been using Angstrom 2011.03 (oe-classic) on a modified
>> at91sam9g20ek board. Unfortunately, it seems that it is no longer updated
>> - it contains obsolete version of dropbear (0.52) ect. I tried switching
>> to the new oe-core based version, but it lacks adequate bsp layer. I also
>> tried manually changing the opkg.conf and installing packages from
>> http://www.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base/
>>
>>
> but it only caused more problems (can't login at all).
>> How can i get an up-to-date Angstrom for this architecture? Should I
>> stick to the classic OE and manually update recipies, or rather create a
>> bsp layer?
>
> Create a bsp layer
OK, I found the meta-atmel layer here:
https://github.com/rascalmicro/meta-atmel
I got the following error:
~/angstrom/setup-scripts$ MACHINE=at91sam9g20ek bitbake console-image
Pseudo is not present but is required, building this first before the
main build
ERROR: ParseError at
/home/mn/angstrom/setup-scripts/sources/meta-atmel/recipes-bsp/u-boot/u-boot.inc:62:
unparsed line: 'INSANE_SKIP_${PN} = True': --:--:--
ERROR: Command execution failed: Exited with 1
Is there any way to fix it?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Newbie question: Angstrom on at91sam9g20
2012-08-30 14:22 ` Mateusz Nowaczyk
@ 2012-08-30 14:29 ` Paul Eggleton
2012-08-30 14:45 ` Mateusz Nowaczyk
0 siblings, 1 reply; 6+ messages in thread
From: Paul Eggleton @ 2012-08-30 14:29 UTC (permalink / raw)
To: Mateusz Nowaczyk; +Cc: openembedded-devel
On Thursday 30 August 2012 16:22:55 Mateusz Nowaczyk wrote:
> Pseudo is not present but is required, building this first before the
> main build
> ERROR: ParseError at
> /home/mn/angstrom/setup-scripts/sources/meta-atmel/recipes-bsp/u-boot/u-boot
> .inc:62: unparsed line: 'INSANE_SKIP_${PN} = True': --:--:--
> ERROR: Command execution failed: Exited with 1
> Is there any way to fix it?
Whoever maintains the meta-atmel layer needs to fix it up to use quotes around
that value - also True is probably no longer an appropriate value for
INSANE_SKIP_.
It sounds like meta-atmel is somewhat out of date with respect to master since
the quoting change went in a few months ago.
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Newbie question: Angstrom on at91sam9g20
2012-08-30 14:29 ` Paul Eggleton
@ 2012-08-30 14:45 ` Mateusz Nowaczyk
2012-08-30 17:47 ` Mateusz Nowaczyk
0 siblings, 1 reply; 6+ messages in thread
From: Mateusz Nowaczyk @ 2012-08-30 14:45 UTC (permalink / raw)
To: openembedded-devel
On 30.08.2012 16:29, Paul Eggleton wrote:
> On Thursday 30 August 2012 16:22:55 Mateusz Nowaczyk wrote:
>> Pseudo is not present but is required, building this first before the
>> main build
>> ERROR: ParseError at
>> /home/mn/angstrom/setup-scripts/sources/meta-atmel/recipes-bsp/u-boot/u-boot
>> .inc:62: unparsed line: 'INSANE_SKIP_${PN} = True': --:--:--
>> ERROR: Command execution failed: Exited with 1
>> Is there any way to fix it?
>
> Whoever maintains the meta-atmel layer needs to fix it up to use quotes around
> that value - also True is probably no longer an appropriate value for
> INSANE_SKIP_.
Thx, I added quotes and it started building!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Newbie question: Angstrom on at91sam9g20
2012-08-30 14:45 ` Mateusz Nowaczyk
@ 2012-08-30 17:47 ` Mateusz Nowaczyk
0 siblings, 0 replies; 6+ messages in thread
From: Mateusz Nowaczyk @ 2012-08-30 17:47 UTC (permalink / raw)
To: openembedded-devel
Now I get the following error:
ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'.
Unable to fetch URL from any source.
ERROR: Logfile of failure stored in:
/home/mn/angstrom/setup-scripts/build/tmp-angstrom_v2012_05-eglibc/work/at91sam9g20ek-angstrom-linux-gnueabi/linux-3.0.1-r0/temp/log.do_fetch.30370
Log data follows:
| DEBUG: Trying PREMIRRORS
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['cvs',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['svn',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['git',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['hg',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['bzr',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['osc',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['p4',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: For url ['file', '', 'defconfig', '', '', {}] comparing ['svk',
'.*', '/.*', '', '', {}] to ['http',
'sources.angstrom-distribution.org', '/', '', '', {}]
| DEBUG: Trying Upstream
| ERROR: Function failed: Fetcher failure for URL: 'file://defconfig'.
Unable to fetch URL from any source.
NOTE: package linux-3.0.1-r0: task do_fetch: Failed
ERROR: Task 607
(/home/mn/angstrom/setup-scripts/sources/meta-handheld/recipes-kernel/linux/linux_3.0.1.bb,
do_fetch) failed with exit code '1'
Any ideas? And why does it try to build the 3.0.1 kernel instead of 2.6.30?
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-30 17:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-29 17:25 Newbie question: Angstrom on at91sam9g20 Mateusz Nowaczyk
2012-08-30 8:03 ` Koen Kooi
2012-08-30 14:22 ` Mateusz Nowaczyk
2012-08-30 14:29 ` Paul Eggleton
2012-08-30 14:45 ` Mateusz Nowaczyk
2012-08-30 17:47 ` Mateusz Nowaczyk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.