* [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
@ 2012-09-08 12:02 ` Gabor Juhos
0 siblings, 0 replies; 4+ messages in thread
From: Gabor Juhos @ 2012-09-08 12:02 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, Gabor Juhos, stable
Besides the CPU and DDR PLLs, the CPU and DDR frequencies
can be derived from other PLLs in the SRIF block on the
AR934x SoCs. The current code does not checks if the SRIF
PLLs are used and this can lead to incorrectly calculated
CPU/DDR frequencies.
Fix it by calculating the frequencies from SRIF PLLs if
those are used on a given board.
Cc: <stable@vger.kernel.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
This depends on the following patch:
'MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x'
https://patchwork.linux-mips.org/patch/4305/
arch/mips/ath79/clock.c | 109 ++++++++++++++++++------
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 23 +++++
2 files changed, 104 insertions(+), 28 deletions(-)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index d272857..579f452 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -17,6 +17,8 @@
#include <linux/err.h>
#include <linux/clk.h>
+#include <asm/div64.h>
+
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
@@ -166,11 +168,34 @@ static void __init ar933x_clocks_init(void)
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
+static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+ u32 frac, u32 out_div)
+{
+ u64 t;
+ u32 ret;
+
+ t = ath79_ref_clk.rate;
+ t *= nint;
+ do_div(t, ref_div);
+ ret = t;
+
+ t = ath79_ref_clk.rate;
+ t *= nfrac;
+ do_div(t, ref_div * frac);
+ ret += t;
+
+ ret /= (1 << out_div);
+ return ret;
+}
+
static void __init ar934x_clocks_init(void)
{
- u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+ u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
u32 cpu_pll, ddr_pll;
u32 bootstrap;
+ void __iomem *dpll_base;
+
+ dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
@@ -178,33 +203,59 @@ static void __init ar934x_clocks_init(void)
else
ath79_ref_clk.rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-
- cpu_pll = nint * ath79_ref_clk.rate / ref_div;
- cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-
- ddr_pll = nint * ath79_ref_clk.rate / ref_div;
- ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+ frac = 1 << 6;
+ }
+
+ cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
+
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+ frac = 1 << 10;
+ }
+
+ ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
@@ -240,6 +291,8 @@ static void __init ar934x_clocks_init(void)
ath79_wdt_clk.rate = ath79_ref_clk.rate;
ath79_uart_clk.rate = ath79_ref_clk.rate;
+
+ iounmap(dpll_base);
}
void __init ath79_clocks_init(void)
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index 3ccae12..a5e0f17 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -65,6 +65,8 @@
#define AR934X_WMAC_SIZE 0x20000
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+#define AR934X_SRIF_SIZE 0x1000
/*
* DDR_CTRL block
@@ -406,4 +408,25 @@
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
+/*
+ * SRIF block
+ */
+#define AR934X_SRIF_CPU_DPLL1_REG 0x1c0
+#define AR934X_SRIF_CPU_DPLL2_REG 0x1c4
+#define AR934X_SRIF_CPU_DPLL3_REG 0x1c8
+
+#define AR934X_SRIF_DDR_DPLL1_REG 0x240
+#define AR934X_SRIF_DDR_DPLL2_REG 0x244
+#define AR934X_SRIF_DDR_DPLL3_REG 0x248
+
+#define AR934X_SRIF_DPLL1_REFDIV_SHIFT 27
+#define AR934X_SRIF_DPLL1_REFDIV_MASK 0x1f
+#define AR934X_SRIF_DPLL1_NINT_SHIFT 18
+#define AR934X_SRIF_DPLL1_NINT_MASK 0x1ff
+#define AR934X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
+
+#define AR934X_SRIF_DPLL2_LOCAL_PLL BIT(30)
+#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
+#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+
#endif /* __ASM_MACH_AR71XX_REGS_H */
--
1.7.10
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
@ 2012-09-08 12:02 ` Gabor Juhos
0 siblings, 0 replies; 4+ messages in thread
From: Gabor Juhos @ 2012-09-08 12:02 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, Gabor Juhos, stable
Besides the CPU and DDR PLLs, the CPU and DDR frequencies
can be derived from other PLLs in the SRIF block on the
AR934x SoCs. The current code does not checks if the SRIF
PLLs are used and this can lead to incorrectly calculated
CPU/DDR frequencies.
Fix it by calculating the frequencies from SRIF PLLs if
those are used on a given board.
Cc: <stable@vger.kernel.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
This depends on the following patch:
'MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x'
https://patchwork.linux-mips.org/patch/4305/
arch/mips/ath79/clock.c | 109 ++++++++++++++++++------
arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 23 +++++
2 files changed, 104 insertions(+), 28 deletions(-)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index d272857..579f452 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -17,6 +17,8 @@
#include <linux/err.h>
#include <linux/clk.h>
+#include <asm/div64.h>
+
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
@@ -166,11 +168,34 @@ static void __init ar933x_clocks_init(void)
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
+static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+ u32 frac, u32 out_div)
+{
+ u64 t;
+ u32 ret;
+
+ t = ath79_ref_clk.rate;
+ t *= nint;
+ do_div(t, ref_div);
+ ret = t;
+
+ t = ath79_ref_clk.rate;
+ t *= nfrac;
+ do_div(t, ref_div * frac);
+ ret += t;
+
+ ret /= (1 << out_div);
+ return ret;
+}
+
static void __init ar934x_clocks_init(void)
{
- u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+ u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
u32 cpu_pll, ddr_pll;
u32 bootstrap;
+ void __iomem *dpll_base;
+
+ dpll_base = ioremap(AR934X_SRIF_BASE, AR934X_SRIF_SIZE);
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
@@ -178,33 +203,59 @@ static void __init ar934x_clocks_init(void)
else
ath79_ref_clk.rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
-
- cpu_pll = nint * ath79_ref_clk.rate / ref_div;
- cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
- nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NINT_MASK;
- frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
- AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
-
- ddr_pll = nint * ath79_ref_clk.rate / ref_div;
- ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+ frac = 1 << 6;
+ }
+
+ cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
+
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+ AR934X_SRIF_DPLL2_OUTDIV_MASK;
+ pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL1_REG);
+ nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
+ AR934X_SRIF_DPLL1_NINT_MASK;
+ nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
+ ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+ pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+ nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NINT_MASK;
+ nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+ frac = 1 << 10;
+ }
+
+ ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+ nfrac, frac, out_div);
clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
@@ -240,6 +291,8 @@ static void __init ar934x_clocks_init(void)
ath79_wdt_clk.rate = ath79_ref_clk.rate;
ath79_uart_clk.rate = ath79_ref_clk.rate;
+
+ iounmap(dpll_base);
}
void __init ath79_clocks_init(void)
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index 3ccae12..a5e0f17 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -65,6 +65,8 @@
#define AR934X_WMAC_SIZE 0x20000
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+#define AR934X_SRIF_SIZE 0x1000
/*
* DDR_CTRL block
@@ -406,4 +408,25 @@
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
+/*
+ * SRIF block
+ */
+#define AR934X_SRIF_CPU_DPLL1_REG 0x1c0
+#define AR934X_SRIF_CPU_DPLL2_REG 0x1c4
+#define AR934X_SRIF_CPU_DPLL3_REG 0x1c8
+
+#define AR934X_SRIF_DDR_DPLL1_REG 0x240
+#define AR934X_SRIF_DDR_DPLL2_REG 0x244
+#define AR934X_SRIF_DDR_DPLL3_REG 0x248
+
+#define AR934X_SRIF_DPLL1_REFDIV_SHIFT 27
+#define AR934X_SRIF_DPLL1_REFDIV_MASK 0x1f
+#define AR934X_SRIF_DPLL1_NINT_SHIFT 18
+#define AR934X_SRIF_DPLL1_NINT_MASK 0x1ff
+#define AR934X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
+
+#define AR934X_SRIF_DPLL2_LOCAL_PLL BIT(30)
+#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
+#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+
#endif /* __ASM_MACH_AR71XX_REGS_H */
--
1.7.10
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
2012-09-08 12:02 ` Gabor Juhos
(?)
@ 2012-09-23 17:48 ` Ralf Baechle
2012-09-24 7:26 ` Gabor Juhos
-1 siblings, 1 reply; 4+ messages in thread
From: Ralf Baechle @ 2012-09-23 17:48 UTC (permalink / raw)
To: Gabor Juhos; +Cc: linux-mips, stable
On Sat, Sep 08, 2012 at 02:02:21PM +0200, Gabor Juhos wrote:
Applied but I had to fix a conflict:
@@ -65,6 +65,8 @@
#define AR934X_WMAC_SIZE 0x20000
#define AR934X_EHCI_BASE 0x1b000000
#define AR934X_EHCI_SIZE 0x200
+#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+#define AR934X_SRIF_SIZE 0x1000
/*
* DDR_CTRL block
The EHCI lines don't exist yet. Seems harmless though.
Ralf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs
2012-09-23 17:48 ` Ralf Baechle
@ 2012-09-24 7:26 ` Gabor Juhos
0 siblings, 0 replies; 4+ messages in thread
From: Gabor Juhos @ 2012-09-24 7:26 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, stable
2012.09.23. 19:48 keltezéssel, Ralf Baechle írta:
> On Sat, Sep 08, 2012 at 02:02:21PM +0200, Gabor Juhos wrote:
>
> Applied but I had to fix a conflict:
>
> @@ -65,6 +65,8 @@
> #define AR934X_WMAC_SIZE 0x20000
> #define AR934X_EHCI_BASE 0x1b000000
> #define AR934X_EHCI_SIZE 0x200
> +#define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
> +#define AR934X_SRIF_SIZE 0x1000
>
> /*
> * DDR_CTRL block
>
> The EHCI lines don't exist yet. Seems harmless though.
Hm, I'm sure that the line was present a few days ago. It has been added by the
following commit:
commit 00ffed582fe8a3f7556593c0e8baaf3da3df85b0
Author: Gabor Juhos <juhosg@openwrt.org>
Date: Sat Aug 4 15:03:56 2012 +0000
MIPS: ath79: add USB platform setup code for AR934X
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4172/
Signed-off-by: John Crispin <blogic@openwrt.org>
However I don't see that commit in the 'mips-for-linux-next' branch of the
'upstream-sfr.git' tree anymore.
Also these changes are missing:
MIPS: ath79: register USB host controller on the DB120 board
MIPS: ath79: use a helper function for USB resource initialization
-Gabor
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-09-24 7:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-08 12:02 [PATCH] MIPS: ath79: fix CPU/DDR frequency calculation for SRIF PLLs Gabor Juhos
2012-09-08 12:02 ` Gabor Juhos
2012-09-23 17:48 ` Ralf Baechle
2012-09-24 7:26 ` Gabor Juhos
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.