[PATCH v3 05/11] clk: davinci - add dm644x clock initialization

[nsekhar@ti.com (Sekhar Nori)]

On 11/5/2012 9:12 PM, Murali Karicheri wrote:
> On 11/03/2012 09:30 AM, Sekhar Nori wrote:
>> On 10/25/2012 9:41 PM, Murali Karicheri wrote:
>>> This patch adds dm644x clock initialization code that consists of
>>> clocks data for various clocks and clock register callouts to
>>> various clock drivers. It uses following clk drivers for this
>>>
>>>   1. clk-fixed-rate - for ref clock
>>>   2. clk-mux - for mux at the input and output of main pll
>>>   3. davinci specific clk-pll for main pll clock
>>>   4. davinci specific clk-div for pll divider clock
>>>   5. clk-fixed-factor for fixed factor clock such as auxclk
>>>   6. davinci specific clk-psc for psc clocks
>>>
>>> This patch also moves all of the PLL and PSC register definitions
>>> from clock.h and psc.h under davinci to the clk/davinci folder so
>>> that various soc specific clock initialization code can share these
>>> definitions.
>> Except this patch does not move the defines, it creates a copy of them
>> (which is bad since you quickly lose track of which is the correct
>> copy). Is this done to avoid including mach/ header files here?
> Yes.
>> It will
>> actually be better to include the mach/ files here as a temporary
>> solution and then remove the include mach/ files once all the SoCs have
>> been converted over.
> 
> I was thinking we are not allowed to include mach/* header files in
> driver files. But most of the clk drivers
> such clk-imx28, spear6xx_clock.c. versatile/clk-integrator.c etc are
> including mach/ headers. One issue is that the definitions in pll.h are
> re-usable across other machines falling under c6x and Keystone (new
> device we are working on) as well. Where do we keep includes that can be
> re-used across different architectures? include/linux/platform_data/ ?

In this case, it is not really platform data or even an interface for
drivers to use, so I prefer include/linux/clk/davinci-pll.h

> I
> see clk-integrator.h, clk-nomadik.h and clk-u300 sitting there. So I
> suggest moving any header files that defines utility functions, register
> definitions across different architectures to
> include/linux/platform_data. Candidate files would be clock.h, pll.h,
> clk-psc.h, clk-pll.h and clk-div.h. This way these can be used across

It is not clear to me why you would move these files outside of
drivers/clk/davinci. They are not used by any other code outside of this
directory.

> the above machines that use the above architectures. Can we do this in
> my next version? This way we don't have to make another move later. All
> these CLK IPs are re-used across multiple architectures and make perfect
> sense to me to move to the above folder.

Thanks,
Sekhar