From: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
To: "x86@kernel.org" <x86@kernel.org>,
"kexec@lists.infradead.org" <kexec@lists.infradead.org>,
Marcelo Tosatti <mtosatti@redhat.com>,
Gleb Natapov <gleb@redhat.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Subject: [PATCH v8 2/2] KVM-INTEL: add a notifier and a bitmap to support VMCLEAR in kdump
Date: Thu, 22 Nov 2012 16:25:05 +0800 [thread overview]
Message-ID: <50ADE161.8090209@cn.fujitsu.com> (raw)
In-Reply-To: <50ADE0C2.1000106@cn.fujitsu.com>
The notifier will be registered in crash_notifier_list when loading
kvm-intel module. And the bitmap indicates whether we should do
VMCLEAR operation in kdump. The bits in the bitmap are set/unset
according to different conditions.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
---
arch/x86/kvm/vmx.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 70 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4ff0ab9..d890372 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -41,6 +41,7 @@
#include <asm/i387.h>
#include <asm/xcr.h>
#include <asm/perf_event.h>
+#include <asm/kexec.h>
#include "trace.h"
@@ -963,6 +964,49 @@ static void vmcs_load(struct vmcs *vmcs)
vmcs, phys_addr);
}
+#ifdef CONFIG_KEXEC
+/*
+ * This bitmap is used to indicate whether the vmclear
+ * operation is enabled on all cpus. All disabled by
+ * default.
+ */
+static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE;
+
+static inline void crash_enable_local_vmclear(int cpu)
+{
+ cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline void crash_disable_local_vmclear(int cpu)
+{
+ cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline int crash_local_vmclear_enabled(int cpu)
+{
+ return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static void vmclear_local_loaded_vmcss(void);
+static int crash_vmclear_local_loaded_vmcss(struct notifier_block *this,
+ unsigned long val, void *ptr)
+{
+ int cpu = raw_smp_processor_id();
+
+ if (crash_local_vmclear_enabled(cpu))
+ vmclear_local_loaded_vmcss();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block crash_vmclear_notifier = {
+ .notifier_call = crash_vmclear_local_loaded_vmcss,
+};
+#else
+static inline void crash_enable_local_vmclear(int cpu) { }
+static inline void crash_disable_local_vmclear(int cpu) { }
+#endif /* CONFIG_KEXEC */
+
static void __loaded_vmcs_clear(void *arg)
{
struct loaded_vmcs *loaded_vmcs = arg;
@@ -972,8 +1016,10 @@ static void __loaded_vmcs_clear(void *arg)
return; /* vcpu migration can race with cpu offline */
if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
per_cpu(current_vmcs, cpu) = NULL;
+ crash_disable_local_vmclear(cpu);
list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
loaded_vmcs_init(loaded_vmcs);
+ crash_enable_local_vmclear(cpu);
}
static void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
@@ -1491,8 +1537,10 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
local_irq_disable();
+ crash_disable_local_vmclear(cpu);
list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
&per_cpu(loaded_vmcss_on_cpu, cpu));
+ crash_enable_local_vmclear(cpu);
local_irq_enable();
/*
@@ -2302,6 +2350,18 @@ static int hardware_enable(void *garbage)
return -EBUSY;
INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
+
+ /*
+ * Now we can enable the vmclear operation in kdump
+ * since the loaded_vmcss_on_cpu list on this cpu
+ * has been initialized.
+ *
+ * Though the cpu is not in VMX operation now, there
+ * is no problem to enable the vmclear operation
+ * for the loaded_vmcss_on_cpu list is empty!
+ */
+ crash_enable_local_vmclear(cpu);
+
rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
test_bits = FEATURE_CONTROL_LOCKED;
@@ -7230,6 +7290,11 @@ static int __init vmx_init(void)
if (r)
goto out3;
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_register(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
@@ -7265,6 +7330,11 @@ static void __exit vmx_exit(void)
free_page((unsigned long)vmx_io_bitmap_b);
free_page((unsigned long)vmx_io_bitmap_a);
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_unregister(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
kvm_exit();
}
--
1.7.1
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: Zhang Yanfei <zhangyanfei-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
To: "x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org"
<x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"kexec-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<kexec-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Marcelo Tosatti
<mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Gleb Natapov <gleb-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v8 2/2] KVM-INTEL: add a notifier and a bitmap to support VMCLEAR in kdump
Date: Thu, 22 Nov 2012 16:25:05 +0800 [thread overview]
Message-ID: <50ADE161.8090209@cn.fujitsu.com> (raw)
In-Reply-To: <50ADE0C2.1000106-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
The notifier will be registered in crash_notifier_list when loading
kvm-intel module. And the bitmap indicates whether we should do
VMCLEAR operation in kdump. The bits in the bitmap are set/unset
according to different conditions.
Signed-off-by: Zhang Yanfei <zhangyanfei-BthXqXjhjHXQFUHtdCDX3A@public.gmane.org>
---
arch/x86/kvm/vmx.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 70 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4ff0ab9..d890372 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -41,6 +41,7 @@
#include <asm/i387.h>
#include <asm/xcr.h>
#include <asm/perf_event.h>
+#include <asm/kexec.h>
#include "trace.h"
@@ -963,6 +964,49 @@ static void vmcs_load(struct vmcs *vmcs)
vmcs, phys_addr);
}
+#ifdef CONFIG_KEXEC
+/*
+ * This bitmap is used to indicate whether the vmclear
+ * operation is enabled on all cpus. All disabled by
+ * default.
+ */
+static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE;
+
+static inline void crash_enable_local_vmclear(int cpu)
+{
+ cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline void crash_disable_local_vmclear(int cpu)
+{
+ cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static inline int crash_local_vmclear_enabled(int cpu)
+{
+ return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap);
+}
+
+static void vmclear_local_loaded_vmcss(void);
+static int crash_vmclear_local_loaded_vmcss(struct notifier_block *this,
+ unsigned long val, void *ptr)
+{
+ int cpu = raw_smp_processor_id();
+
+ if (crash_local_vmclear_enabled(cpu))
+ vmclear_local_loaded_vmcss();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block crash_vmclear_notifier = {
+ .notifier_call = crash_vmclear_local_loaded_vmcss,
+};
+#else
+static inline void crash_enable_local_vmclear(int cpu) { }
+static inline void crash_disable_local_vmclear(int cpu) { }
+#endif /* CONFIG_KEXEC */
+
static void __loaded_vmcs_clear(void *arg)
{
struct loaded_vmcs *loaded_vmcs = arg;
@@ -972,8 +1016,10 @@ static void __loaded_vmcs_clear(void *arg)
return; /* vcpu migration can race with cpu offline */
if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
per_cpu(current_vmcs, cpu) = NULL;
+ crash_disable_local_vmclear(cpu);
list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
loaded_vmcs_init(loaded_vmcs);
+ crash_enable_local_vmclear(cpu);
}
static void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
@@ -1491,8 +1537,10 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
local_irq_disable();
+ crash_disable_local_vmclear(cpu);
list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
&per_cpu(loaded_vmcss_on_cpu, cpu));
+ crash_enable_local_vmclear(cpu);
local_irq_enable();
/*
@@ -2302,6 +2350,18 @@ static int hardware_enable(void *garbage)
return -EBUSY;
INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
+
+ /*
+ * Now we can enable the vmclear operation in kdump
+ * since the loaded_vmcss_on_cpu list on this cpu
+ * has been initialized.
+ *
+ * Though the cpu is not in VMX operation now, there
+ * is no problem to enable the vmclear operation
+ * for the loaded_vmcss_on_cpu list is empty!
+ */
+ crash_enable_local_vmclear(cpu);
+
rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
test_bits = FEATURE_CONTROL_LOCKED;
@@ -7230,6 +7290,11 @@ static int __init vmx_init(void)
if (r)
goto out3;
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_register(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
@@ -7265,6 +7330,11 @@ static void __exit vmx_exit(void)
free_page((unsigned long)vmx_io_bitmap_b);
free_page((unsigned long)vmx_io_bitmap_a);
+#ifdef CONFIG_KEXEC
+ atomic_notifier_chain_unregister(&crash_notifier_list,
+ &crash_vmclear_notifier);
+#endif
+
kvm_exit();
}
--
1.7.1
next prev parent reply other threads:[~2012-11-22 8:26 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 8:22 [PATCH v8 0/2] x86: vmclear vmcss on all cpus when doing kdump if necessary Zhang Yanfei
2012-11-22 8:22 ` Zhang Yanfei
2012-11-22 8:23 ` [PATCH v8 1/2] x86/kexec: add a new atomic notifier list for kdump Zhang Yanfei
2012-11-22 8:23 ` Zhang Yanfei
2012-11-26 15:08 ` Eric W. Biederman
2012-11-26 15:08 ` Eric W. Biederman
2012-11-26 17:20 ` Gleb Natapov
2012-11-26 17:20 ` Gleb Natapov
2012-11-26 17:20 ` Gleb Natapov
2012-11-26 17:43 ` Eric W. Biederman
2012-11-26 17:43 ` Eric W. Biederman
2012-11-26 17:43 ` Eric W. Biederman
2012-11-26 17:53 ` Gleb Natapov
2012-11-26 17:53 ` Gleb Natapov
2012-11-26 17:53 ` Gleb Natapov
2012-11-26 18:18 ` Eric W. Biederman
2012-11-26 18:18 ` Eric W. Biederman
2012-11-27 1:32 ` Zhang Yanfei
2012-11-27 1:32 ` Zhang Yanfei
2012-11-27 1:49 ` Eric W. Biederman
2012-11-27 1:49 ` Eric W. Biederman
2012-11-27 1:53 ` Zhang Yanfei
2012-11-27 1:53 ` Zhang Yanfei
2012-11-22 8:25 ` Zhang Yanfei [this message]
2012-11-22 8:25 ` [PATCH v8 2/2] KVM-INTEL: add a notifier and a bitmap to support VMCLEAR in kdump Zhang Yanfei
2012-11-25 14:26 ` [PATCH v8 0/2] x86: vmclear vmcss on all cpus when doing kdump if necessary Gleb Natapov
2012-11-25 14:26 ` Gleb Natapov
2012-11-26 1:50 ` Zhang Yanfei
2012-11-26 1:50 ` Zhang Yanfei
2012-11-26 1:50 ` Zhang Yanfei
2012-11-26 1:55 ` Zhang Yanfei
2012-11-26 1:55 ` Zhang Yanfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50ADE161.8090209@cn.fujitsu.com \
--to=zhangyanfei@cn.fujitsu.com \
--cc=gleb@redhat.com \
--cc=kexec@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.