[PATCH 0/5] ASoC: twl6040: Updates for 3.9

[PATCH 0/5] ASoC: twl6040: Updates for 3.9

[Peter Ujfalusi]

Hi Mark, Liam,

Small fixes from Misael for twl6040 codec driver and devm_* conversion, switch
to system workqueue and dead code removal.

Regards,
Peter
---
Misael Lopez Cruz (2):
  ASoC: twl6040: Convert PLUGINT to no-suspend irq
  ASoC: twl6040: Prevent extra power transitions during resume

Peter Ujfalusi (3):
  ASoC: twl6040: Convert to use devm_* when possible
  ASoC: twl6040: Switch to use system workqueue for jack reporting
  ASoC: twl6040: Remove leftover code from hs/hf ramp implementation

 sound/soc/codecs/twl6040.c | 67 +++++++++-------------------------------------
 1 file changed, 13 insertions(+), 54 deletions(-)

-- 
1.8.1

[PATCH 1/5] ASoC: twl6040: Convert PLUGINT to no-suspend irq

[Peter Ujfalusi]

From: Misael Lopez Cruz <misael.lopez@ti.com>

Convert headset PLUGINT interrupt to NO_SUSPEND type in order to
allow handling of insertion/removal events while device is suspended.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 3fc3fc6..ef31ace 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1174,7 +1174,7 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	mutex_init(&priv->mutex);
 
 	ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
-				   0, "twl6040_irq_plug", codec);
+				   IRQF_NO_SUSPEND, "twl6040_irq_plug", codec);
 	if (ret) {
 		dev_err(codec->dev, "PLUG IRQ request failed: %d\n", ret);
 		goto plugirq_err;
-- 
1.8.1

[PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Peter Ujfalusi]

From: Misael Lopez Cruz <misael.lopez@ti.com>

Prevent unnecessary power state transitions that might occur while
CODEC is resuming if already in target state.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index ef31ace..b40830c 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1114,8 +1114,10 @@ static int twl6040_suspend(struct snd_soc_codec *codec)
 
 static int twl6040_resume(struct snd_soc_codec *codec)
 {
-	twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
+	if (codec->dapm.bias_level != codec->dapm.suspend_bias_level) {
+		twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+		twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
+	}
 
 	return 0;
 }
-- 
1.8.1

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 606 bytes --]

On Fri, Jan 11, 2013 at 11:32:32AM +0100, Peter Ujfalusi wrote:

> -	twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
> -	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
> +	if (codec->dapm.bias_level != codec->dapm.suspend_bias_level) {
> +		twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
> +		twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
> +	}

The device should always be in either _STANDBY or _OFF (depending on if
it supports idle_bias_off) before it tries to suspend so
suspend_bias_level ought to be redundant.  We should really get round to
killing it...

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Peter Ujfalusi]

On 01/11/2013 12:52 PM, Mark Brown wrote:
> On Fri, Jan 11, 2013 at 11:32:32AM +0100, Peter Ujfalusi wrote:
> 
>> -	twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
>> -	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
>> +	if (codec->dapm.bias_level != codec->dapm.suspend_bias_level) {
>> +		twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
>> +		twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
>> +	}
> 
> The device should always be in either _STANDBY or _OFF (depending on if
> it supports idle_bias_off) before it tries to suspend so
> suspend_bias_level ought to be redundant.  We should really get round to
> killing it...

Yes, that's true. At the moment I can just send the codec to _STANDBY in
resume since I don't have idle_bias_off support ready (due to external
dependencies, but I'm working on it). But when we have idle_bias_off support
we want to avoid sending the codec to _STANDBY here just that ASoC core will
put us back to _OFF later on. On/Off is a bit expensive on twl6040.
Since the core saves the previous bias_level in before suspend I can just do
this here:

	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);

If we were in _OFF before it is going to do nothing, but if we were in
_STANDBY it brings the codec back.

-- 
Péter

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 446 bytes --]

On Fri, Jan 11, 2013 at 02:40:20PM +0100, Peter Ujfalusi wrote:

> Since the core saves the previous bias_level in before suspend I can just do
> this here:

> 	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);

> If we were in _OFF before it is going to do nothing, but if we were in
> _STANDBY it brings the codec back.

That'll work, yes (though removing the function when idle_bias_off is
implemented would obviously be better).

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Peter Ujfalusi]

On 01/11/2013 02:46 PM, Mark Brown wrote:
> On Fri, Jan 11, 2013 at 02:40:20PM +0100, Peter Ujfalusi wrote:
> 
>> Since the core saves the previous bias_level in before suspend I can just do
>> this here:
> 
>> 	twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
> 
>> If we were in _OFF before it is going to do nothing, but if we were in
>> _STANDBY it brings the codec back.
> 
> That'll work, yes (though removing the function when idle_bias_off is
> implemented would obviously be better).

True. Along with the suspend function since I'm not doing anything fancy there
and if idle_bias_off is set the core will not call suspend of the driver if it
is not already in _OFF.
I'll keep this in mind for the future and resend with only with

	twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);

in the resume.
But I wait if you have other comments for the rest for the series.

-- 
Péter

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 229 bytes --]

On Fri, Jan 11, 2013 at 02:55:53PM +0100, Peter Ujfalusi wrote:

> But I wait if you have other comments for the rest for the series.

The rest of it was fine, I was going to apply them next time I go
through and applied things.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Peter Ujfalusi]

On 01/11/2013 03:24 PM, Mark Brown wrote:
> On Fri, Jan 11, 2013 at 02:55:53PM +0100, Peter Ujfalusi wrote:
> 
>> But I wait if you have other comments for the rest for the series.
> 
> The rest of it was fine, I was going to apply them next time I go
> through and applied things.

If it's OK I'll resend the series and replace this patch with a different one
to remove just the second
twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
call from resume.

-- 
Péter

Re: [PATCH 2/5] ASoC: twl6040: Prevent extra power transitions during resume

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 277 bytes --]

On Fri, Jan 11, 2013 at 03:44:07PM +0100, Peter Ujfalusi wrote:

> If it's OK I'll resend the series and replace this patch with a different one
> to remove just the second
> twl6040_set_bias_level(codec, codec->dapm.suspend_bias_level);
> call from resume.

Sure, no problem.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH 3/5] ASoC: twl6040: Convert to use devm_* when possible

[Peter Ujfalusi]

In this way we can clean up the probe and remove paths

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index b40830c..29fa457 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -1134,9 +1134,10 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 						   struct platform_device, dev);
 	int ret = 0;
 
-	priv = kzalloc(sizeof(struct twl6040_data), GFP_KERNEL);
+	priv = devm_kzalloc(codec->dev, sizeof(*priv), GFP_KERNEL);
 	if (priv == NULL)
 		return -ENOMEM;
+
 	snd_soc_codec_set_drvdata(codec, priv);
 
 	priv->codec = codec;
@@ -1161,25 +1162,23 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	priv->plug_irq = platform_get_irq(pdev, 0);
 	if (priv->plug_irq < 0) {
 		dev_err(codec->dev, "invalid irq\n");
-		ret = -EINVAL;
-		goto work_err;
+		return -EINVAL;
 	}
 
 	priv->workqueue = alloc_workqueue("twl6040-codec", 0, 0);
-	if (!priv->workqueue) {
-		ret = -ENOMEM;
-		goto work_err;
-	}
+	if (!priv->workqueue)
+		return -ENOMEM;
 
 	INIT_DELAYED_WORK(&priv->hs_jack.work, twl6040_accessory_work);
 
 	mutex_init(&priv->mutex);
 
-	ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
-				   IRQF_NO_SUSPEND, "twl6040_irq_plug", codec);
+	ret = devm_request_threaded_irq(codec->dev, priv->plug_irq, NULL,
+					twl6040_audio_handler, IRQF_NO_SUSPEND,
+					"twl6040_irq_plug", codec);
 	if (ret) {
 		dev_err(codec->dev, "PLUG IRQ request failed: %d\n", ret);
-		goto plugirq_err;
+		goto err;
 	}
 
 	twl6040_init_chip(codec);
@@ -1189,12 +1188,8 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	if (!ret)
 		return 0;
 
-	/* Error path */
-	free_irq(priv->plug_irq, codec);
-plugirq_err:
+err:
 	destroy_workqueue(priv->workqueue);
-work_err:
-	kfree(priv);
 	return ret;
 }
 
@@ -1203,9 +1198,7 @@ static int twl6040_remove(struct snd_soc_codec *codec)
 	struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
 
 	twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	free_irq(priv->plug_irq, codec);
 	destroy_workqueue(priv->workqueue);
-	kfree(priv);
 
 	return 0;
 }
-- 
1.8.1

[PATCH 4/5] ASoC: twl6040: Switch to use system workqueue for jack reporting

[Peter Ujfalusi]

There's no need to create a queue for this anymore

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 29fa457..6c2aa93 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -75,7 +75,6 @@ struct twl6040_data {
 	u16 hf_right_step;
 	struct twl6040_jack_data hs_jack;
 	struct snd_soc_codec *codec;
-	struct workqueue_struct *workqueue;
 	struct mutex mutex;
 };
 
@@ -404,8 +403,7 @@ static irqreturn_t twl6040_audio_handler(int irq, void *data)
 	struct snd_soc_codec *codec = data;
 	struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
 
-	queue_delayed_work(priv->workqueue, &priv->hs_jack.work,
-			   msecs_to_jiffies(200));
+	schedule_delayed_work(&priv->hs_jack.work, msecs_to_jiffies(200));
 
 	return IRQ_HANDLED;
 }
@@ -1165,10 +1163,6 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 		return -EINVAL;
 	}
 
-	priv->workqueue = alloc_workqueue("twl6040-codec", 0, 0);
-	if (!priv->workqueue)
-		return -ENOMEM;
-
 	INIT_DELAYED_WORK(&priv->hs_jack.work, twl6040_accessory_work);
 
 	mutex_init(&priv->mutex);
@@ -1178,27 +1172,18 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 					"twl6040_irq_plug", codec);
 	if (ret) {
 		dev_err(codec->dev, "PLUG IRQ request failed: %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	twl6040_init_chip(codec);
 
 	/* power on device */
-	ret = twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-	if (!ret)
-		return 0;
-
-err:
-	destroy_workqueue(priv->workqueue);
-	return ret;
+	return twl6040_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 }
 
 static int twl6040_remove(struct snd_soc_codec *codec)
 {
-	struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
-
 	twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	destroy_workqueue(priv->workqueue);
 
 	return 0;
 }
-- 
1.8.1

[PATCH 5/5] ASoC: twl6040: Remove leftover code from hs/hf ramp implementation

[Peter Ujfalusi]

The code to do the ramp has been removed a long time ago. Remove the
remaining code as well since this is not needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 sound/soc/codecs/twl6040.c | 21 ---------------------
 1 file changed, 21 deletions(-)

diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 6c2aa93..6ad2909 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -69,10 +69,6 @@ struct twl6040_data {
 	int hs_power_mode_locked;
 	unsigned int clk_in;
 	unsigned int sysclk;
-	u16 hs_left_step;
-	u16 hs_right_step;
-	u16 hf_left_step;
-	u16 hf_right_step;
 	struct twl6040_jack_data hs_jack;
 	struct snd_soc_codec *codec;
 	struct mutex mutex;
@@ -1127,7 +1123,6 @@ static int twl6040_resume(struct snd_soc_codec *codec)
 static int twl6040_probe(struct snd_soc_codec *codec)
 {
 	struct twl6040_data *priv;
-	struct twl6040_codec_data *pdata = dev_get_platdata(codec->dev);
 	struct platform_device *pdev = container_of(codec->dev,
 						   struct platform_device, dev);
 	int ret = 0;
@@ -1141,22 +1136,6 @@ static int twl6040_probe(struct snd_soc_codec *codec)
 	priv->codec = codec;
 	codec->control_data = dev_get_drvdata(codec->dev->parent);
 
-	if (pdata && pdata->hs_left_step && pdata->hs_right_step) {
-		priv->hs_left_step = pdata->hs_left_step;
-		priv->hs_right_step = pdata->hs_right_step;
-	} else {
-		priv->hs_left_step = 1;
-		priv->hs_right_step = 1;
-	}
-
-	if (pdata && pdata->hf_left_step && pdata->hf_right_step) {
-		priv->hf_left_step = pdata->hf_left_step;
-		priv->hf_right_step = pdata->hf_right_step;
-	} else {
-		priv->hf_left_step = 1;
-		priv->hf_right_step = 1;
-	}
-
 	priv->plug_irq = platform_get_irq(pdev, 0);
 	if (priv->plug_irq < 0) {
 		dev_err(codec->dev, "invalid irq\n");
-- 
1.8.1