From: Josh Wu <josh.wu@atmel.com>
To: Josh Wu <josh.wu@atmel.com>
Cc: plagnioj@jcrosoft.com, linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, nicolas.ferre@atmel.com
Subject: Re: [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek
Date: Mon, 14 Jan 2013 17:01:52 +0800 [thread overview]
Message-ID: <50F3C980.7070507@atmel.com> (raw)
In-Reply-To: <1355912840-29501-1-git-send-email-josh.wu@atmel.com>
Ping? Any feedback for these patches?
On 12/19/2012 6:27 PM, Josh Wu wrote:
> Those patches will enable PMECC in dt parameters for at91sam9x5ek, at91sam9n12ek.
>
> Josh Wu (3):
> MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and
> sector size according to the ONFI parameter ECC requirement.
> at91: 9x5: add DT parameters to enable PMECC
> at91: at91sam9n12: add DT parameters to enable PMECC
>
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12ek.dts | 5 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 5 +-
> drivers/mtd/nand/atmel_nand.c | 89 +++++++++++++++++++++++++++++++++++
> 5 files changed, 102 insertions(+), 2 deletions(-)
>
Best Regards,
Josh Wu
WARNING: multiple messages have this Message-ID (diff)
From: josh.wu@atmel.com (Josh Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek
Date: Mon, 14 Jan 2013 17:01:52 +0800 [thread overview]
Message-ID: <50F3C980.7070507@atmel.com> (raw)
In-Reply-To: <1355912840-29501-1-git-send-email-josh.wu@atmel.com>
Ping? Any feedback for these patches?
On 12/19/2012 6:27 PM, Josh Wu wrote:
> Those patches will enable PMECC in dt parameters for at91sam9x5ek, at91sam9n12ek.
>
> Josh Wu (3):
> MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and
> sector size according to the ONFI parameter ECC requirement.
> at91: 9x5: add DT parameters to enable PMECC
> at91: at91sam9n12: add DT parameters to enable PMECC
>
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12ek.dts | 5 +-
> arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 5 +-
> drivers/mtd/nand/atmel_nand.c | 89 +++++++++++++++++++++++++++++++++++
> 5 files changed, 102 insertions(+), 2 deletions(-)
>
Best Regards,
Josh Wu
next prev parent reply other threads:[~2013-01-14 9:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-19 10:27 [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek Josh Wu
2012-12-19 10:27 ` Josh Wu
2012-12-19 10:27 ` [PATCH 1/3] MTD: at91: atmel_nand: for PMECC, add code to choose the ecc bits and sector size according to the ONFI parameter ECC requirement Josh Wu
2012-12-19 10:27 ` Josh Wu
2013-01-15 12:26 ` Artem Bityutskiy
2013-01-15 12:26 ` Artem Bityutskiy
2013-01-16 1:50 ` Bo Shen
2013-01-16 1:50 ` Bo Shen
2013-01-16 8:28 ` Josh Wu
2013-01-16 8:28 ` Josh Wu
2013-01-17 11:54 ` Artem Bityutskiy
2013-01-17 11:54 ` Artem Bityutskiy
2012-12-19 10:27 ` [PATCH 2/3] at91: 9x5: add DT parameters to enable PMECC Josh Wu
2012-12-19 10:27 ` Josh Wu
2012-12-19 10:27 ` [PATCH 3/3] at91: at91sam9n12: " Josh Wu
2012-12-19 10:27 ` Josh Wu
2013-01-14 9:01 ` Josh Wu [this message]
2013-01-14 9:01 ` [PATCH 0/3] at91: PMECC: enable PMECC in dt for at91sam9x5ek, at91sam9n12ek Josh Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F3C980.7070507@atmel.com \
--to=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.