Re: [RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information

[kishon <kishon@ti.com>]

Hi,

On Thursday 17 January 2013 03:09 PM, Roger Quadros wrote:
> On 01/16/2013 05:00 PM, Kishon Vijay Abraham I wrote:
>> This is in preparation for the changes in PHY library to support adding
>> and getting multiple PHYs of the same type. In the new design, the
>> binding information between the PHY and the USB controller should be
>> specified in the platform specific initialization code. So it's been
>> done for OMAP platforms here.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>> This kind-of binding should be done in all the platforms (I've done only
>> for OMAP platform).
>>   arch/arm/mach-omap2/usb-musb.c |    7 ++++++-
>>   1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
>> index 9d27e3f..bbe2fa5 100644
>> --- a/arch/arm/mach-omap2/usb-musb.c
>> +++ b/arch/arm/mach-omap2/usb-musb.c
>> @@ -24,6 +24,7 @@
>>   #include <linux/dma-mapping.h>
>>   #include <linux/io.h>
>>   #include <linux/usb/musb.h>
>> +#include <linux/usb/phy.h>
>>
>>   #include "omap_device.h"
>>   #include "soc.h"
>> @@ -85,8 +86,12 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
>>   	musb_plat.mode = board_data->mode;
>>   	musb_plat.extvbus = board_data->extvbus;
>>
>> -	if (cpu_is_omap44xx())
>> +	if (cpu_is_omap44xx()) {
>>   		musb_plat.has_mailbox = true;
>> +		usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
>> +	} else if (cpu_is_omap34xx()) {
>> +		usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
>> +	}
>
> Are you sure than these OMAP platforms cannot be wired in any other way
> to the PHY?
>
> If they can be then this association must come from the board files or
> device tree.

I had given some thought about that and since all the existing OMAP 
platforms had it this way, I added it here.
You having pointed that out, I'll move these to board files.

Thanks
Kishon