* [Buildroot] Pandaboard ethernet
@ 2013-01-31 8:31 Gerald
2013-01-31 8:43 ` Yegor Yefremov
0 siblings, 1 reply; 7+ messages in thread
From: Gerald @ 2013-01-31 8:31 UTC (permalink / raw)
To: buildroot
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
have no ethernet :
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.
What is the driver of ethernet pandaboard and how-to use it ?
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 8:31 [Buildroot] Pandaboard ethernet Gerald
@ 2013-01-31 8:43 ` Yegor Yefremov
2013-01-31 8:52 ` Belisko Marek
0 siblings, 1 reply; 7+ messages in thread
From: Yegor Yefremov @ 2013-01-31 8:43 UTC (permalink / raw)
To: buildroot
On Thu, Jan 31, 2013 at 9:31 AM, Gerald <gerald.radix@gmail.com> wrote:
> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
> have no ethernet :
>
> ifconfig eth0 up :
> SIOCGIFFLAGS: No such device.
>
> What is the driver of ethernet pandaboard and how-to use it ?
Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
ifconfig -a
Yegor
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 8:43 ` Yegor Yefremov
@ 2013-01-31 8:52 ` Belisko Marek
2013-01-31 9:07 ` Gerald
2013-01-31 9:53 ` Gerald
0 siblings, 2 replies; 7+ messages in thread
From: Belisko Marek @ 2013-01-31 8:52 UTC (permalink / raw)
To: buildroot
On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
<yegorslists@googlemail.com> wrote:
> On Thu, Jan 31, 2013 at 9:31 AM, Gerald <gerald.radix@gmail.com> wrote:
>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
>> have no ethernet :
>>
>> ifconfig eth0 up :
>> SIOCGIFFLAGS: No such device.
>>
>> What is the driver of ethernet pandaboard and how-to use it ?
>
> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in
this veriosion:
CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
>
> ifconfig -a
>
> Yegor
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
Cheers,
mbe
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 8:52 ` Belisko Marek
@ 2013-01-31 9:07 ` Gerald
2013-01-31 9:53 ` Gerald
1 sibling, 0 replies; 7+ messages in thread
From: Gerald @ 2013-01-31 9:07 UTC (permalink / raw)
To: buildroot
In buildroot, where is the .config file for the kernel.
It's a pandaboard ES card...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
> On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
> <yegorslists@googlemail.com> wrote:
>
>> On Thu, Jan 31, 2013 at 9:31 AM, Gerald<gerald.radix@gmail.com> wrote:
>>
>>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
>>> have no ethernet :
>>>
>>> ifconfig eth0 up :
>>> SIOCGIFFLAGS: No such device.
>>>
>>> What is the driver of ethernet pandaboard and how-to use it ?
>>>
>> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
>>
> Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in
> this veriosion:
> CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
>
>> ifconfig -a
>>
>> Yegor
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
> Cheers,
>
> mbe
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 8:52 ` Belisko Marek
2013-01-31 9:07 ` Gerald
@ 2013-01-31 9:53 ` Gerald
2013-01-31 10:44 ` Yegor Yefremov
1 sibling, 1 reply; 7+ messages in thread
From: Gerald @ 2013-01-31 9:53 UTC (permalink / raw)
To: buildroot
CONFIG_USB_NET_SMSC95XX=y in output/build/linux-3.6.8
and the network works if i use ubuntu distrib...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
> On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
> <yegorslists@googlemail.com> wrote:
>
>> On Thu, Jan 31, 2013 at 9:31 AM, Gerald<gerald.radix@gmail.com> wrote:
>>
>>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
>>> have no ethernet :
>>>
>>> ifconfig eth0 up :
>>> SIOCGIFFLAGS: No such device.
>>>
>>> What is the driver of ethernet pandaboard and how-to use it ?
>>>
>> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
>>
> Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in
> this veriosion:
> CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
>
>> ifconfig -a
>>
>> Yegor
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>>
> Cheers,
>
> mbe
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 9:53 ` Gerald
@ 2013-01-31 10:44 ` Yegor Yefremov
2013-01-31 21:00 ` Nicolas Dechesne
0 siblings, 1 reply; 7+ messages in thread
From: Yegor Yefremov @ 2013-01-31 10:44 UTC (permalink / raw)
To: buildroot
Please provide complete dmesg and ifconfig -a outputs (for both Ubuntu
and BR). Please use http://pastebin.com/ for logs.
Yegor
On Thu, Jan 31, 2013 at 10:53 AM, Gerald <gerald.radix@gmail.com> wrote:
> CONFIG_USB_NET_SMSC95XX=y in output/build/linux-3.6.8
>
> and the network works if i use ubuntu distrib...
>
>
>
>
> Le 31/01/2013 09:52, Belisko Marek a ?crit :
>>
>> On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
>>
>> <yegorslists@googlemail.com> wrote:
>>
>>>
>>> On Thu, Jan 31, 2013 at 9:31 AM, Gerald<gerald.radix@gmail.com> wrote:
>>>
>>>>
>>>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
>>>> have no ethernet :
>>>>
>>>> ifconfig eth0 up :
>>>> SIOCGIFFLAGS: No such device.
>>>>
>>>> What is the driver of ethernet pandaboard and how-to use it ?
>>>>
>>>
>>> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
>>>
>>
>> Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in
>> this veriosion:
>> CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
>>
>>>
>>> ifconfig -a
>>>
>>> Yegor
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at busybox.net
>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>
>>
>> Cheers,
>>
>> mbe
>>
>>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] Pandaboard ethernet
2013-01-31 10:44 ` Yegor Yefremov
@ 2013-01-31 21:00 ` Nicolas Dechesne
0 siblings, 0 replies; 7+ messages in thread
From: Nicolas Dechesne @ 2013-01-31 21:00 UTC (permalink / raw)
To: buildroot
you probably need to enable EHCI too which is not enabled by default
+CONFIG_USB_EHCI_HCD_OMAP=y
On Thu, Jan 31, 2013 at 11:44 AM, Yegor Yefremov
<yegorslists@googlemail.com> wrote:
> Please provide complete dmesg and ifconfig -a outputs (for both Ubuntu
> and BR). Please use http://pastebin.com/ for logs.
>
> Yegor
>
> On Thu, Jan 31, 2013 at 10:53 AM, Gerald <gerald.radix@gmail.com> wrote:
>> CONFIG_USB_NET_SMSC95XX=y in output/build/linux-3.6.8
>>
>> and the network works if i use ubuntu distrib...
>>
>>
>>
>>
>> Le 31/01/2013 09:52, Belisko Marek a ?crit :
>>>
>>> On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
>>>
>>> <yegorslists@googlemail.com> wrote:
>>>
>>>>
>>>> On Thu, Jan 31, 2013 at 9:31 AM, Gerald<gerald.radix@gmail.com> wrote:
>>>>
>>>>>
>>>>> With Buildroot 2011.11.1, i use the setting of pandaboard config, but i
>>>>> have no ethernet :
>>>>>
>>>>> ifconfig eth0 up :
>>>>> SIOCGIFFLAGS: No such device.
>>>>>
>>>>> What is the driver of ethernet pandaboard and how-to use it ?
>>>>>
>>>>
>>>> Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
>>>>
>>>
>>> Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in
>>> this veriosion:
>>> CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
>>>
>>>>
>>>> ifconfig -a
>>>>
>>>> Yegor
>>>> _______________________________________________
>>>> buildroot mailing list
>>>> buildroot at busybox.net
>>>> http://lists.busybox.net/mailman/listinfo/buildroot
>>>>
>>>
>>> Cheers,
>>>
>>> mbe
>>>
>>>
>>
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-01-31 21:00 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-31 8:31 [Buildroot] Pandaboard ethernet Gerald
2013-01-31 8:43 ` Yegor Yefremov
2013-01-31 8:52 ` Belisko Marek
2013-01-31 9:07 ` Gerald
2013-01-31 9:53 ` Gerald
2013-01-31 10:44 ` Yegor Yefremov
2013-01-31 21:00 ` Nicolas Dechesne
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.