* [U-Boot] i.MX6: Add hdmidet command @ 2013-02-19 20:12 Eric Nelson 2013-02-19 20:30 ` Otavio Salvador 0 siblings, 1 reply; 8+ messages in thread From: Eric Nelson @ 2013-02-19 20:12 UTC (permalink / raw) To: u-boot Hi Stefano, This seems to have gotten lost in the shuffle. It's showing as "Changes requested" in Patchwork: http://patchwork.ozlabs.org/patch/186280/ Is there something you'd like changed? Please advise, Eric ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-19 20:12 [U-Boot] i.MX6: Add hdmidet command Eric Nelson @ 2013-02-19 20:30 ` Otavio Salvador 2013-02-19 23:03 ` Eric Nelson 0 siblings, 1 reply; 8+ messages in thread From: Otavio Salvador @ 2013-02-19 20:30 UTC (permalink / raw) To: u-boot On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson <eric.nelson@boundarydevices.com> wrote: > Hi Stefano, > > This seems to have gotten lost in the shuffle. > > It's showing as "Changes requested" in Patchwork: > > http://patchwork.ozlabs.org/patch/186280/ > > Is there something you'd like changed? > > Please advise, I'd say to use space between the '+' as done in other code. -- Otavio Salvador O.S. Systems E-mail: otavio at ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-19 20:30 ` Otavio Salvador @ 2013-02-19 23:03 ` Eric Nelson 2013-02-20 0:42 ` Otavio Salvador 0 siblings, 1 reply; 8+ messages in thread From: Eric Nelson @ 2013-02-19 23:03 UTC (permalink / raw) To: u-boot Hi Otavio, On 02/19/2013 01:30 PM, Otavio Salvador wrote: > On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson > <eric.nelson@boundarydevices.com> wrote: >> Hi Stefano, >> >> This seems to have gotten lost in the shuffle. >> >> It's showing as "Changes requested" in Patchwork: >> >> http://patchwork.ozlabs.org/patch/186280/ >> >> Is there something you'd like changed? >> >> Please advise, > > I'd say to use space between the '+' as done in other code. > I must be dense. Which '+' needs a space? Please advise, Eric ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-19 23:03 ` Eric Nelson @ 2013-02-20 0:42 ` Otavio Salvador 2013-02-20 1:16 ` Eric Nelson 0 siblings, 1 reply; 8+ messages in thread From: Otavio Salvador @ 2013-02-20 0:42 UTC (permalink / raw) To: u-boot On Tue, Feb 19, 2013 at 8:03 PM, Eric Nelson <eric.nelson@boundarydevices.com> wrote: > Hi Otavio, > > > On 02/19/2013 01:30 PM, Otavio Salvador wrote: >> >> On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson >> <eric.nelson@boundarydevices.com> wrote: >>> >>> Hi Stefano, >>> >>> This seems to have gotten lost in the shuffle. >>> >>> It's showing as "Changes requested" in Patchwork: >>> >>> http://patchwork.ozlabs.org/patch/186280/ >>> >>> Is there something you'd like changed? >>> >>> Please advise, >> >> >> I'd say to use space between the '+' as done in other code. >> > > I must be dense. > > Which '+' needs a space? It seems usually when dealing with offsets we have ' + '. Personally I think it is clear to read too. But it's not my call so it is up to you and Stefano. -- Otavio Salvador O.S. Systems E-mail: otavio at ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-20 0:42 ` Otavio Salvador @ 2013-02-20 1:16 ` Eric Nelson 2013-02-20 1:19 ` Otavio Salvador 0 siblings, 1 reply; 8+ messages in thread From: Eric Nelson @ 2013-02-20 1:16 UTC (permalink / raw) To: u-boot On 02/19/2013 05:42 PM, Otavio Salvador wrote: > On Tue, Feb 19, 2013 at 8:03 PM, Eric Nelson > <eric.nelson@boundarydevices.com> wrote: >> Hi Otavio, >> >> >> On 02/19/2013 01:30 PM, Otavio Salvador wrote: >>> >>> On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson >>> <eric.nelson@boundarydevices.com> wrote: >>>> >>>> Hi Stefano, >>>> >>>> This seems to have gotten lost in the shuffle. >>>> >>>> It's showing as "Changes requested" in Patchwork: >>>> >>>> http://patchwork.ozlabs.org/patch/186280/ >>>> >>>> Is there something you'd like changed? >>>> >>>> Please advise, >>> >>> >>> I'd say to use space between the '+' as done in other code. >>> >> >> I must be dense. >> >> Which '+' needs a space? > > It seems usually when dealing with offsets we have ' + '. Personally I > think it is clear to read too. But it's not my call so it is up to you > and Stefano. > Gotcha. You mean here: +{ + u8 reg = __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0); ^ That's the trouble with commenting on the patchwork link... No context. Regards, Eric ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-20 1:16 ` Eric Nelson @ 2013-02-20 1:19 ` Otavio Salvador 2013-02-20 1:21 ` Eric Nelson 0 siblings, 1 reply; 8+ messages in thread From: Otavio Salvador @ 2013-02-20 1:19 UTC (permalink / raw) To: u-boot On Tue, Feb 19, 2013 at 10:16 PM, Eric Nelson <eric.nelson@boundarydevices.com> wrote: > On 02/19/2013 05:42 PM, Otavio Salvador wrote: >> >> On Tue, Feb 19, 2013 at 8:03 PM, Eric Nelson >> <eric.nelson@boundarydevices.com> wrote: >>> >>> Hi Otavio, >>> >>> >>> On 02/19/2013 01:30 PM, Otavio Salvador wrote: >>>> >>>> >>>> On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson >>>> <eric.nelson@boundarydevices.com> wrote: >>>>> >>>>> >>>>> Hi Stefano, >>>>> >>>>> This seems to have gotten lost in the shuffle. >>>>> >>>>> It's showing as "Changes requested" in Patchwork: >>>>> >>>>> http://patchwork.ozlabs.org/patch/186280/ >>>>> >>>>> Is there something you'd like changed? >>>>> >>>>> Please advise, >>>> >>>> >>>> >>>> I'd say to use space between the '+' as done in other code. >>>> >>> >>> I must be dense. >>> >>> Which '+' needs a space? >> >> >> It seems usually when dealing with offsets we have ' + '. Personally I >> think it is clear to read too. But it's not my call so it is up to you >> and Stefano. >> > Gotcha. > > You mean here: > > +{ > + u8 reg = __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0); > ^ > > That's the trouble with commenting on the patchwork link... Yes; a space between both macros. -- Otavio Salvador O.S. Systems E-mail: otavio at ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-20 1:19 ` Otavio Salvador @ 2013-02-20 1:21 ` Eric Nelson 2013-02-20 8:36 ` Stefano Babic 0 siblings, 1 reply; 8+ messages in thread From: Eric Nelson @ 2013-02-20 1:21 UTC (permalink / raw) To: u-boot On 02/19/2013 06:19 PM, Otavio Salvador wrote: > On Tue, Feb 19, 2013 at 10:16 PM, Eric Nelson > <eric.nelson@boundarydevices.com> wrote: >> On 02/19/2013 05:42 PM, Otavio Salvador wrote: >>> >>> On Tue, Feb 19, 2013 at 8:03 PM, Eric Nelson >>> <eric.nelson@boundarydevices.com> wrote: >>>> >>>> Hi Otavio, >>>> >>>> >>>> On 02/19/2013 01:30 PM, Otavio Salvador wrote: >>>>> >>>>> >>>>> On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson >>>>> <eric.nelson@boundarydevices.com> wrote: >>>>>> >>>>>> >>>>>> Hi Stefano, >>>>>> >>>>>> This seems to have gotten lost in the shuffle. >>>>>> >>>>>> It's showing as "Changes requested" in Patchwork: >>>>>> >>>>>> http://patchwork.ozlabs.org/patch/186280/ >>>>>> >>>>>> Is there something you'd like changed? >>>>>> >>>>>> Please advise, >>>>> >>>>> >>>>> >>>>> I'd say to use space between the '+' as done in other code. >>>>> >>>> >>>> I must be dense. >>>> >>>> Which '+' needs a space? >>> >>> >>> It seems usually when dealing with offsets we have ' + '. Personally I >>> think it is clear to read too. But it's not my call so it is up to you >>> and Stefano. >>> >> Gotcha. >> >> You mean here: >> >> +{ >> + u8 reg = __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0); >> ^ >> >> That's the trouble with commenting on the patchwork link... > > Yes; a space between both macros. > And a run through checkpatch... I am dense today. ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] i.MX6: Add hdmidet command 2013-02-20 1:21 ` Eric Nelson @ 2013-02-20 8:36 ` Stefano Babic 0 siblings, 0 replies; 8+ messages in thread From: Stefano Babic @ 2013-02-20 8:36 UTC (permalink / raw) To: u-boot On 20/02/2013 02:21, Eric Nelson wrote: > On 02/19/2013 06:19 PM, Otavio Salvador wrote: >> On Tue, Feb 19, 2013 at 10:16 PM, Eric Nelson >> <eric.nelson@boundarydevices.com> wrote: >>> On 02/19/2013 05:42 PM, Otavio Salvador wrote: >>>> >>>> On Tue, Feb 19, 2013 at 8:03 PM, Eric Nelson >>>> <eric.nelson@boundarydevices.com> wrote: >>>>> >>>>> Hi Otavio, >>>>> >>>>> >>>>> On 02/19/2013 01:30 PM, Otavio Salvador wrote: >>>>>> >>>>>> >>>>>> On Tue, Feb 19, 2013 at 5:12 PM, Eric Nelson >>>>>> <eric.nelson@boundarydevices.com> wrote: >>>>>>> >>>>>>> >>>>>>> Hi Stefano, >>>>>>> >>>>>>> This seems to have gotten lost in the shuffle. >>>>>>> >>>>>>> It's showing as "Changes requested" in Patchwork: >>>>>>> >>>>>>> http://patchwork.ozlabs.org/patch/186280/ >>>>>>> >>>>>>> Is there something you'd like changed? >>>>>>> >>>>>>> Please advise, >>>>>> >>>>>> >>>>>> >>>>>> I'd say to use space between the '+' as done in other code. >>>>>> >>>>> >>>>> I must be dense. >>>>> >>>>> Which '+' needs a space? >>>> >>>> >>>> It seems usually when dealing with offsets we have ' + '. Personally I >>>> think it is clear to read too. But it's not my call so it is up to you >>>> and Stefano. >>>> >>> Gotcha. >>> >>> You mean here: >>> >>> +{ >>> + u8 reg = __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0); >>> ^ >>> >>> That's the trouble with commenting on the patchwork link... >> >> Yes; a space between both macros. >> > > And a run through checkpatch... > > I am dense today. > Right, sorry for late answer - it is only to fix checkpatch warning, nothing more. I wll then apply it Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de ===================================================================== ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-02-20 8:36 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-02-19 20:12 [U-Boot] i.MX6: Add hdmidet command Eric Nelson 2013-02-19 20:30 ` Otavio Salvador 2013-02-19 23:03 ` Eric Nelson 2013-02-20 0:42 ` Otavio Salvador 2013-02-20 1:16 ` Eric Nelson 2013-02-20 1:19 ` Otavio Salvador 2013-02-20 1:21 ` Eric Nelson 2013-02-20 8:36 ` Stefano Babic
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.