All of lore.kernel.org
 help / color / mirror / Atom feed
From: gerlando.falauto@keymile.com (Gerlando Falauto)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type
Date: Mon, 18 Mar 2013 08:59:24 +0100	[thread overview]
Message-ID: <5146C95C.3000509@keymile.com> (raw)
In-Reply-To: <alpine.LFD.2.02.1303152101080.22263@ionos>

Hi Thomas,

On 03/15/2013 09:47 PM, Thomas Gleixner wrote:
> Gerlando,
>
> On Fri, 15 Mar 2013, Gerlando Falauto wrote:

[...]
>
> The patch is correct, but we want a more incremental approach.

OK, will do.

> Otherwise I only have a coding style related request:
>
>> @@ -246,9 +246,21 @@ void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
>>   	list_add_tail(&gc->list, &gc_list);
>>   	raw_spin_unlock(&gc_lock);
>>
>> -	/* Init mask cache ? */
>> -	if (flags & IRQ_GC_INIT_MASK_CACHE)
>> -		gc->mask_cache = irq_reg_readl(gc->reg_base + ct->regs.mask);
>> +	for (i = 0; i < gc->num_ct; i++) {
>> +		if (flags & IRQ_GC_SEPARATE_MASK_REGISTERS)
>> +			/* Define mask cache pointer */
>> +			ct[i].pmask_cache = &ct[i].mask_cache;
>> +		else
>> +			/* They all point to the same mask cache */
>> +			ct[i].pmask_cache = &ct[0].mask_cache;
>> +
>> +		/* Init mask cache ? */
>> +		if ((flags & IRQ_GC_INIT_MASK_CACHE)
>> +		 && ((flags & IRQ_GC_SEPARATE_MASK_REGISTER)
>> +		  || (i == 0)))
>> +			*ct[i].pmask_cache =
>> +				irq_reg_readl(gc->reg_base + ct[i].regs.mask);
>> +	}
>
> My eyes are burning, my head is spinning and I have a hard time not to
> use swearwords.

You're right... and I appreciate you NOT using such words. :-)

Just one question:

> 	bool mskperct = flags & IRQ_GC_SEPARATE_MASK_REGISTERS;
> 	bool mskinit = flags & IRQ_GC_INIT_MASK_CACHE;
> 	u32 *shmsk = &gc->shared_mask_cache;
>
> 	if (!mskperct && mskinit)
> 	     	*shmsk = irq_reg_readl(gc->reg_base + ct->regs.mask);
>
> 	for (i = 0; i < gc->num_ct: i++, ct++) {
> 	       ct->pmask_cache = mskperct ? &ct->mask_cache : shmsk;

What is wrong with using ct[i] instead? I find it a bit more readable.

> Or something like that, perhaps ?

Totally agree.

Thanks a lot for your patience!
Gerlando

  reply	other threads:[~2013-03-18  7:59 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-14 16:10 [PATCH] genirq: allow an alternative setup for the mask cache Holger Brunck
2013-03-14 17:45 ` Simon Guinot
2013-03-15 10:43   ` Holger Brunck
2013-03-15 11:02     ` Thomas Gleixner
2013-03-15 16:26   ` Gerlando Falauto
2013-03-15 19:55     ` Thomas Gleixner
2013-03-14 19:08 ` Thomas Gleixner
2013-03-14 19:42 ` Ezequiel Garcia
2013-03-18 11:05   ` Gerlando Falauto
2013-03-15 19:36 ` [PATCH v2 0/2] refactoring for mask_cache Gerlando Falauto
2013-03-15 19:36   ` [PATCH 1/2] genirq: cosmetic: remove cur_regs Gerlando Falauto
2013-03-15 19:36   ` [PATCH 2/2] genirq: move mask_cache into struct irq_chip_type Gerlando Falauto
2013-03-15 20:47     ` Thomas Gleixner
2013-03-18  7:59       ` Gerlando Falauto [this message]
2013-03-18  8:56         ` Thomas Gleixner
2013-03-15 21:25   ` [PATCH v2 0/2] refactoring for mask_cache Andrew Lunn
2013-03-15 23:34     ` Simon Guinot
2013-03-18 14:00 ` [PATCH v3 0/9] " Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 1/9] genirq: cosmetic: remove cur_regs Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 2/9] genirq: add mask_cache and pmask_cache into struct irq_chip_type Gerlando Falauto
2013-03-19 11:32     ` Thomas Gleixner
2013-03-18 14:00   ` [PATCH v3 3/9] gpio: mvebu: convert to usage of *pmask_cache within irq_chip_type Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 4/9] MIPS: JZ4740: " Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 5/9] ARM: SAMSUNG: " Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 6/9] genirq: rename mask_cache to shared_mask_cache Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 7/9] genirq: handle separate mask registers Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 8/9] orion-gpio: enable IRQ_GC_SEPARATE_MASK_REGISTERS Gerlando Falauto
2013-03-18 14:00   ` [PATCH v3 9/9] gpio: mvebu: " Gerlando Falauto
2013-03-18 14:28   ` [PATCH v3 0/9] refactoring for mask_cache Simon Guinot
2013-03-18 14:39     ` Simon Guinot
2013-03-19 10:03   ` Ezequiel Garcia
2013-03-19 10:09     ` Gerlando Falauto
2013-03-19 11:25       ` Ezequiel Garcia
2013-03-19 11:06     ` Jason Cooper
2013-03-19 11:10       ` Gerlando Falauto
2013-03-19 11:44         ` Jason Cooper
2013-03-19 11:56           ` Jason Cooper
2013-03-20 17:40             ` Gerlando Falauto
2013-03-20 21:42               ` Thomas Gleixner
2013-03-21 10:37                 ` Gerlando Falauto
2013-03-21 10:59               ` Simon Guinot
2013-03-19 11:19       ` Ezequiel Garcia
2013-03-21 10:51   ` Simon Guinot
2013-03-21 11:24     ` Gerlando Falauto
2013-04-04  9:31   ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5146C95C.3000509@keymile.com \
    --to=gerlando.falauto@keymile.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.