Re: [PATCH v2] ARM: OMAP4: clock: Add device tree support for AUXCLKs

[Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>]

+ Paul

On 03/26/2013 12:23 PM, Roger Quadros wrote:
> Register a device tree clock provider for the clocks
> on the OMAP4 SoC. Also provide the binding information.
> 
> For now we only provide AUXCLKs.
> 
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> ---
>  .../devicetree/bindings/clock/omap4-clock.txt      |   33 ++++++++++++++++
>  arch/arm/boot/dts/omap4.dtsi                       |    5 ++
>  arch/arm/mach-omap2/cclock44xx_data.c              |   41 ++++++++++++++++++++
>  3 files changed, 79 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/omap4-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/omap4-clock.txt b/Documentation/devicetree/bindings/clock/omap4-clock.txt
> new file mode 100644
> index 0000000..2845a3f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/omap4-clock.txt
> @@ -0,0 +1,33 @@
> +* Clock bindings for Texas Instruments OMAP4 clocks
> +
> +Required properties:
> +- compatible: Should be "ti,omap4-clock"
> +- #clock-cells: Should be <1>
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell.  The following is a list of OMAP4 clocks
> +and IDs.
> +
> +	Clock		ID
> +	------------------
> +	auxclk0_ck	0
> +	auxclk1_ck	1
> +	auxclk2_ck	2
> +	auxclk3_ck	3
> +	auxclk4_ck	4
> +	auxclk5_ck	5
> +
> +Example:
> +
> +aux_clks: scrmclks {
> +	compatible = "ti,omap4-clock";
> +	#clock-cells = <1>;
> +};
> +
> +hsusb1_phy: hsusb1_phy {
> +	compatible = "usb-nop-xceiv";
> +	reset-supply = <&hsusb1_reset>;
> +	clocks = <&aux_clks 3>;
> +	clock-names = "main_clk";
> +	clock-frequency = <19200000>;
> +};
> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
> index 739bb79..f27548a 100644
> --- a/arch/arm/boot/dts/omap4.dtsi
> +++ b/arch/arm/boot/dts/omap4.dtsi
> @@ -101,6 +101,11 @@
>  			ti,hwmods = "counter_32k";
>  		};
>  
> +		clks: clocks {
> +			compatible = "ti,omap4-clock";
> +			#clock-cells = <1>;
> +		};
> +
>  		omap4_pmx_core: pinmux@4a100040 {
>  			compatible = "ti,omap4-padconf", "pinctrl-single";
>  			reg = <0x4a100040 0x0196>;
> diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
> index 3d58f33..a93617b 100644
> --- a/arch/arm/mach-omap2/cclock44xx_data.c
> +++ b/arch/arm/mach-omap2/cclock44xx_data.c
> @@ -27,6 +27,7 @@
>  #include <linux/clk-private.h>
>  #include <linux/clkdev.h>
>  #include <linux/io.h>
> +#include <linux/of.h>
>  
>  #include "soc.h"
>  #include "iomap.h"
> @@ -1663,6 +1664,44 @@ static struct omap_clk omap44xx_clks[] = {
>  	CLK(NULL,	"cpufreq_ck",	&dpll_mpu_ck,	CK_443X),
>  };
>  
> +/*
> + * List of clocks that can be referenced in device tree
> + * Must match with Documentation/devicetree/bindings/clock/omap4-clock.txt
> + */
> +static struct clk *dt_clks[] = {
> +	&auxclk0_ck,
> +	&auxclk1_ck,
> +	&auxclk2_ck,
> +	&auxclk3_ck,
> +	&auxclk4_ck,
> +	&auxclk5_ck,
> +};
> +
> +static struct clk_onecell_data clock_data;
> +
> +#ifdef CONFIG_OF
> +int __init omap4_clk_init_dt(void)
> +{
> +	struct device_node *np;
> +
> +	np = of_find_compatible_node(NULL, NULL, "ti,omap4-clock");
> +	if (np) {
> +		clock_data.clks = dt_clks;
> +		clock_data.clk_num = ARRAY_SIZE(dt_clks);
> +		of_clk_add_provider(np, of_clk_src_onecell_get,	&clock_data);
> +	}
> +
> +	return 0;
> +}
> +
> +#else
> +
> +int __init omap4_clk_init_dt(void)
> +{
> +	return 0;
> +}
> +#endif /* CONFIG_OF */
> +
>  int __init omap4xxx_clk_init(void)
>  {
>  	u32 cpu_clkflg;
> @@ -1693,6 +1732,8 @@ int __init omap4xxx_clk_init(void)
>  
>  	omap2_clk_disable_autoidle_all();
>  
> +	omap4_clk_init_dt();
> +
>  	/*
>  	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
>  	 * state when turning the ABE clock domain. Workaround this by
>