[Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig

All of lore.kernel.org
 help / color / mirror / Atom feed

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-03-25  2:10 ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-03-25  2:10 UTC (permalink / raw)
  To: Russell King - ARM Linux, Will Deacon, dhowells, plagnioj,
	kgene.kim@samsung.com
  Cc: linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

Hello Maintainers:

  is it an issue that need solving ?

  :-)


details:

  make:
    make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
    make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
      set arm-linux-gnu-  for "Cross-compiler tool prefix"
      set "Samsung S5PV210/S5PC210" for "ARM system type"
    make V=1 EXTRA_CFLAGS=-W ARCH=arm


  err:
    arch/arm/kernel/entry-armv.S: Assembler messages:
    arch/arm/kernel/entry-armv.S:207: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:231: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:314: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:335: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:813: Error: selected processor does not support ARM mode `ldrd r4,r5,[r0]'
    arch/arm/kernel/entry-armv.S:814: Error: selected processor does not support ARM mode `ldrd r6,r7,[r1]'
    arch/arm/kernel/entry-armv.S:816: Error: selected processor does not support ARM mode `ldrexd r0,r1,[r2]'
    arch/arm/kernel/entry-armv.S:819: Error: selected processor does not support ARM mode `strexdeq r3,r6,r7,[r2]'
    make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
    make: *** [arch/arm/kernel] Error 2

  related gcc command:
arm-linux-gnu-gcc -Wp,-MD,arch/arm/kernel/.entry-armv.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/android/public-kernel/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/android/public-kernel/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/android/public-kernel/linux-next/include/uapi -Iinclude/generated/uapi -include /android/public-kernel/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -msoft-float          -c -o arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S



  thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-03-25  2:10 ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-03-25  2:10 UTC (permalink / raw)
  To: linux-arm-kernel

Hello Maintainers:

  is it an issue that need solving ?

  :-)


details:

  make:
    make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
    make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
      set arm-linux-gnu-  for "Cross-compiler tool prefix"
      set "Samsung S5PV210/S5PC210" for "ARM system type"
    make V=1 EXTRA_CFLAGS=-W ARCH=arm


  err:
    arch/arm/kernel/entry-armv.S: Assembler messages:
    arch/arm/kernel/entry-armv.S:207: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:231: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:314: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:335: Error: selected processor does not support ARM mode `clrex'
    arch/arm/kernel/entry-armv.S:813: Error: selected processor does not support ARM mode `ldrd r4,r5,[r0]'
    arch/arm/kernel/entry-armv.S:814: Error: selected processor does not support ARM mode `ldrd r6,r7,[r1]'
    arch/arm/kernel/entry-armv.S:816: Error: selected processor does not support ARM mode `ldrexd r0,r1,[r2]'
    arch/arm/kernel/entry-armv.S:819: Error: selected processor does not support ARM mode `strexdeq r3,r6,r7,[r2]'
    make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
    make: *** [arch/arm/kernel] Error 2

  related gcc command:
arm-linux-gnu-gcc -Wp,-MD,arch/arm/kernel/.entry-armv.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/android/public-kernel/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/android/public-kernel/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/android/public-kernel/linux-next/include/uapi -Iinclude/generated/uapi -include /android/public-kernel/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -msoft-float          -c -o arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S



  thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-03-25  2:10 ` Chen Gang
@ 2013-04-03  9:46   ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-03  9:46 UTC (permalink / raw)
  To: Russell King - ARM Linux, Will Deacon, dhowells, plagnioj,
	kgene.kim@samsung.com
  Cc: linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

Hello Maintainers:

  when you have time, could you help to check this suggestion ?

  if we really need treat it as an issue, and also no one have time to
fix it, I should try.


  thanks.

gchen.

On 2013年03月25日 10:10, Chen Gang wrote:
> Hello Maintainers:
> 
>   is it an issue that need solving ?
> 
>   :-)
> 
> 
> details:
> 
>   make:
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
>       set arm-linux-gnu-  for "Cross-compiler tool prefix"
>       set "Samsung S5PV210/S5PC210" for "ARM system type"
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm
> 
> 
>   err:
>     arch/arm/kernel/entry-armv.S: Assembler messages:
>     arch/arm/kernel/entry-armv.S:207: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:231: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:314: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:335: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:813: Error: selected processor does not support ARM mode `ldrd r4,r5,[r0]'
>     arch/arm/kernel/entry-armv.S:814: Error: selected processor does not support ARM mode `ldrd r6,r7,[r1]'
>     arch/arm/kernel/entry-armv.S:816: Error: selected processor does not support ARM mode `ldrexd r0,r1,[r2]'
>     arch/arm/kernel/entry-armv.S:819: Error: selected processor does not support ARM mode `strexdeq r3,r6,r7,[r2]'
>     make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
>     make: *** [arch/arm/kernel] Error 2
> 
>   related gcc command:
> arm-linux-gnu-gcc -Wp,-MD,arch/arm/kernel/.entry-armv.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/android/public-kernel/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/android/public-kernel/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/android/public-kernel/linux-next/include/uapi -Iinclude/generated/uapi -include /android/public-kernel/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -msoft-float          -c -o arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S
> 
> 
> 
>   thanks.
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-03  9:46   ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-03  9:46 UTC (permalink / raw)
  To: linux-arm-kernel

Hello Maintainers:

  when you have time, could you help to check this suggestion ?

  if we really need treat it as an issue, and also no one have time to
fix it, I should try.


  thanks.

gchen.

On 2013?03?25? 10:10, Chen Gang wrote:
> Hello Maintainers:
> 
>   is it an issue that need solving ?
> 
>   :-)
> 
> 
> details:
> 
>   make:
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
>       set arm-linux-gnu-  for "Cross-compiler tool prefix"
>       set "Samsung S5PV210/S5PC210" for "ARM system type"
>     make V=1 EXTRA_CFLAGS=-W ARCH=arm
> 
> 
>   err:
>     arch/arm/kernel/entry-armv.S: Assembler messages:
>     arch/arm/kernel/entry-armv.S:207: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:231: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:314: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:335: Error: selected processor does not support ARM mode `clrex'
>     arch/arm/kernel/entry-armv.S:813: Error: selected processor does not support ARM mode `ldrd r4,r5,[r0]'
>     arch/arm/kernel/entry-armv.S:814: Error: selected processor does not support ARM mode `ldrd r6,r7,[r1]'
>     arch/arm/kernel/entry-armv.S:816: Error: selected processor does not support ARM mode `ldrexd r0,r1,[r2]'
>     arch/arm/kernel/entry-armv.S:819: Error: selected processor does not support ARM mode `strexdeq r3,r6,r7,[r2]'
>     make[1]: *** [arch/arm/kernel/entry-armv.o] Error 1
>     make: *** [arch/arm/kernel] Error 2
> 
>   related gcc command:
> arm-linux-gnu-gcc -Wp,-MD,arch/arm/kernel/.entry-armv.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/android/public-kernel/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/android/public-kernel/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/android/public-kernel/linux-next/include/uapi -Iinclude/generated/uapi -include /android/public-kernel/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -msoft-float          -c -o arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S
> 
> 
> 
>   thanks.
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-03  9:46   ` Chen Gang
@ 2013-04-03 10:10     ` Will Deacon
  -1 siblings, 0 replies; 42+ messages in thread
From: Will Deacon @ 2013-04-03 10:10 UTC (permalink / raw)
  To: Chen Gang
  Cc: Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On Wed, Apr 03, 2013 at 10:46:53AM +0100, Chen Gang wrote:
> Hello Maintainers:
> 
>   when you have time, could you help to check this suggestion ?

[...]

> > 
> >   make:
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
> >       set arm-linux-gnu-  for "Cross-compiler tool prefix"
> >       set "Samsung S5PV210/S5PC210" for "ARM system type"
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm

I think the main problem is that you've reported an issue created from a
randconfig, but you haven't made the config in question available.

Will

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-03 10:10     ` Will Deacon
  0 siblings, 0 replies; 42+ messages in thread
From: Will Deacon @ 2013-04-03 10:10 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, Apr 03, 2013 at 10:46:53AM +0100, Chen Gang wrote:
> Hello Maintainers:
> 
>   when you have time, could you help to check this suggestion ?

[...]

> > 
> >   make:
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
> >       set arm-linux-gnu-  for "Cross-compiler tool prefix"
> >       set "Samsung S5PV210/S5PC210" for "ARM system type"
> >     make V=1 EXTRA_CFLAGS=-W ARCH=arm

I think the main problem is that you've reported an issue created from a
randconfig, but you haven't made the config in question available.

Will

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-03 10:10     ` Will Deacon
@ 2013-04-03 10:29       ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-03 10:29 UTC (permalink / raw)
  To: Will Deacon
  Cc: Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On 2013年04月03日 18:10, Will Deacon wrote:
> I think the main problem is that you've reported an issue created from a
> randconfig, but you haven't made the config in question available.

  excuse me, my English is not quite well.

  I guess your meaning is :
    I need also provide the related .config file in this mail.
    so we can be more easier to find the root cause.

  is it correct ?


  BTW:
    unlucky, the original .config has been deleted.
    I can try to reproduce it, so let us to fix it with more efficiency.

  thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-03 10:29       ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-03 10:29 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?03? 18:10, Will Deacon wrote:
> I think the main problem is that you've reported an issue created from a
> randconfig, but you haven't made the config in question available.

  excuse me, my English is not quite well.

  I guess your meaning is :
    I need also provide the related .config file in this mail.
    so we can be more easier to find the root cause.

  is it correct ?


  BTW:
    unlucky, the original .config has been deleted.
    I can try to reproduce it, so let us to fix it with more efficiency.

  thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-03 10:29       ` Chen Gang
@ 2013-04-17  9:25         ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17  9:25 UTC (permalink / raw)
  To: Will Deacon
  Cc: Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

[-- Attachment #1: Type: text/plain, Size: 5237 bytes --]

On 2013年04月03日 18:29, Chen Gang wrote:
> On 2013年04月03日 18:10, Will Deacon wrote:
>> I think the main problem is that you've reported an issue created from a
>> randconfig, but you haven't made the config in question available.
> 
>   excuse me, my English is not quite well.
> 
>   I guess your meaning is :
>     I need also provide the related .config file in this mail.
>     so we can be more easier to find the root cause.
> 
>   is it correct ?
> 
> 
>   BTW:
>     unlucky, the original .config has been deleted.
>     I can try to reproduce it, so let us to fix it with more efficiency.
> 
>   thanks.
> 

Hello Will Deacon:

  I repeat it again (but it report another location), and put the config as attachment.

  when you have time, please help check (if you have no time, I should try)

  the below is the new related information:

  thanks.


  make:
    make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
    make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
      set arm-linux-gnu-  for "Cross-compiler tool prefix"
      set "Samsung S5PV210/S5PC210" for "ARM system type"
    make V=1 EXTRA_CFLAGS=-W ARCH=arm


  compiling info:

arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S


  compiling err:

arch/arm/vfp/vfphw.S: Assembler messages:
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c2'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c3'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c4'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c5'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c6'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c7'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c8'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c9'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c10'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c11'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c12'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c13'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c14'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c15'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c0'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c1'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c2'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c3'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c4'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c5'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c6'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c7'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c8'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c9'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c10'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c11'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c12'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c13'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c14'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c15'
make[1]: *** [arch/arm/vfp/vfphw.o] Error 1
make: *** [arch/arm/vfp] Error 2





-- 
Chen Gang

Asianux Corporation

[-- Attachment #2: issues_config --]
[-- Type: text/plain, Size: 43127 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.9.0-rc7 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0x00000000
CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE="arm-linux-gnu-"
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
# CONFIG_ALWAYS_USE_PERSISTENT_CLOCK is not set
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_PERIODIC_HZ=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_LOOP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# System Type
#
# CONFIG_MMU is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_PLAT_SAMSUNG=y
CONFIG_PLAT_S5P=y

#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLOCK=y
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_S5P_CLOCK=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_S5P_IRQ=y
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
CONFIG_S5P_DEV_UART=y
# CONFIG_S3C_ADC is not set
# CONFIG_S3C24XX_PWM is not set

#
# Power management
#
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
# CONFIG_PLAT_SPEAR is not set

#
# S5PC110 Machines
#
# CONFIG_MACH_AQUILA is not set
# CONFIG_MACH_GONI is not set
# CONFIG_MACH_SMDKC110 is not set

#
# S5PV210 Machines
#
# CONFIG_MACH_SMDKV210 is not set
# CONFIG_MACH_TORBRECK is not set

#
# Processor Type
#
CONFIG_CPU_ARM7TDMI=y
CONFIG_CPU_ARM9TDMI=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_NOMMU=y
CONFIG_CPU_ABRT_LV4T=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V4=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_HIGH_VECTOR is not set
CONFIG_CPU_ICACHE_DISABLE=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_TLS_REG_EMUL=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_SET_MEM_PARAM is not set
CONFIG_DRAM_BASE=0x00800000
CONFIG_DRAM_SIZE=0x00800000
CONFIG_FLASH_MEM_BASE=0x00400000
CONFIG_FLASH_SIZE=0x00400000
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_775420 is not set

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=200
# CONFIG_SCHED_HRTICK is not set
# CONFIG_THUMB2_KERNEL is not set
# CONFIG_AEABI is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HW_PERF_EVENTS is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
# CONFIG_NEON is not set

#
# Userspace binary formats
#
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
CONFIG_BINFMT_SHARED_FLAT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# CONFIG_ARTHUR is not set

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_APM_EMULATION=m
CONFIG_PM_CLK=y
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
# CONFIG_L2TP_ETH is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
CONFIG_BPF_JIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_YAM is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# FIR device drivers
#
CONFIG_BT=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
CONFIG_OF_SELFTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
# CONFIG_PARPORT is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_SRAM is not set
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_MC13783=m
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
CONFIG_INPUT_GPIO_TILT_POLLED=m
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_RETU_PWRBUTTON is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=m
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_EM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_SAMSUNG is not set
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_SERIAL_ARC is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_DCC=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_ATMEL=m
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_HW_RANDOM_TPM is not set
# CONFIG_R3964 is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_ST33_I2C=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_HAVE_S3C2410_I2C=y
# CONFIG_I2C_S3C2410 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=m

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=m

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_APM_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_MAX8903=m
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_SMB347 is not set
CONFIG_BATTERY_GOLDFISH=m
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_AVS=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_ASIC3=y
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_EGPIO is not set
CONFIG_HTC_PASIC3=m
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SM501 is not set
CONFIG_ABX500_CORE=y
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS65912=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TMIO=y
# CONFIG_MFD_T7L66XB is not set
CONFIG_MFD_TC6387XB=y
CONFIG_MFD_TC6393XB=y
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_GOLDFISH=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=m
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LM3630=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_TPS65217=m
# CONFIG_LOGO is not set
CONFIG_FB_SSD1307=m
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_PS3REMOTE=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB_ARCH_HAS_XHCI is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_S3C is not set
CONFIG_MMC_SDHCI_PXAV3=m
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_TMIO_CORE=m
CONFIG_MMC_TMIO=m
CONFIG_MMC_DW=m
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_RENESAS_TPU=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m

#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_MMIO=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m

#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set

#
# Analog to digital converters
#
CONFIG_EXYNOS_ADC=y
CONFIG_MAX1363=m
# CONFIG_TI_ADC081C is not set
CONFIG_TI_AM335X_ADC=m

#
# Amplifiers
#

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=m
CONFIG_AD5446=m
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
# CONFIG_ITG3200 is not set

#
# Inertial measurement units
#
CONFIG_INV_MPU6050_IIO=m

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_VCNL4000=m
# CONFIG_HID_SENSOR_ALS is not set

#
# Magnetometer sensors
#
CONFIG_AK8975=m
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_PWM=y
# CONFIG_PWM_SAMSUNG is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=4
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y

#
# File systems
#
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_NOMMU_REGIONS=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_TEST_LIST_SORT=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=m
CONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_TEST_KSTRTOX=m
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_S3C_UART0 is not set
# CONFIG_DEBUG_S3C_UART1 is not set
# CONFIG_DEBUG_S3C_UART2 is not set
CONFIG_DEBUG_LL_UART_NONE=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
# CONFIG_EARLY_PRINTK is not set
# CONFIG_ARM_KPROBES_TEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_SMACK=y
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
# CONFIG_IMA_AUDIT is not set
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_APPRAISE=y
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
# CONFIG_X509_CERTIFICATE_PARSER is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=m
CONFIG_VIRTUALIZATION=y

#
# Virtio drivers
#

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17  9:25         ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17  9:25 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?03? 18:29, Chen Gang wrote:
> On 2013?04?03? 18:10, Will Deacon wrote:
>> I think the main problem is that you've reported an issue created from a
>> randconfig, but you haven't made the config in question available.
> 
>   excuse me, my English is not quite well.
> 
>   I guess your meaning is :
>     I need also provide the related .config file in this mail.
>     so we can be more easier to find the root cause.
> 
>   is it correct ?
> 
> 
>   BTW:
>     unlucky, the original .config has been deleted.
>     I can try to reproduce it, so let us to fix it with more efficiency.
> 
>   thanks.
> 

Hello Will Deacon:

  I repeat it again (but it report another location), and put the config as attachment.

  when you have time, please help check (if you have no time, I should try)

  the below is the new related information:

  thanks.


  make:
    make V=1 EXTRA_CFLAGS=-W ARCH=arm randconfig
    make V=1 EXTRA_CFLAGS=-W ARCH=arm menuconfig
      set arm-linux-gnu-  for "Cross-compiler tool prefix"
      set "Samsung S5PV210/S5PC210" for "ARM system type"
    make V=1 EXTRA_CFLAGS=-W ARCH=arm


  compiling info:

arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S


  compiling err:

arch/arm/vfp/vfphw.S: Assembler messages:
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c2'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c3'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c4'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c5'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c6'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c7'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c8'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c9'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c10'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c11'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c12'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c13'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c14'
arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c15'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c0'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c1'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c2'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c3'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c4'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c5'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c6'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c7'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c8'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c9'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c10'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c11'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c12'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c13'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c14'
arch/arm/vfp/vfphw.S:317: Error: selected processor does not support ARM mode `mcrr p11,3,r0,r1,c15'
make[1]: *** [arch/arm/vfp/vfphw.o] Error 1
make: *** [arch/arm/vfp] Error 2





-- 
Chen Gang

Asianux Corporation
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.9.0-rc7 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0x00000000
CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE="arm-linux-gnu-"
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
# CONFIG_ALWAYS_USE_PERSISTENT_CLOCK is not set
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

#
# Timers subsystem
#
CONFIG_PERIODIC_HZ=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_LOOP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# System Type
#
# CONFIG_MMU is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_GPIO_PCA953X is not set
CONFIG_PLAT_SAMSUNG=y
CONFIG_PLAT_S5P=y

#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLOCK=y
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_S5P_CLOCK=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_S5P_IRQ=y
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
CONFIG_S5P_DEV_UART=y
# CONFIG_S3C_ADC is not set
# CONFIG_S3C24XX_PWM is not set

#
# Power management
#
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
# CONFIG_PLAT_SPEAR is not set

#
# S5PC110 Machines
#
# CONFIG_MACH_AQUILA is not set
# CONFIG_MACH_GONI is not set
# CONFIG_MACH_SMDKC110 is not set

#
# S5PV210 Machines
#
# CONFIG_MACH_SMDKV210 is not set
# CONFIG_MACH_TORBRECK is not set

#
# Processor Type
#
CONFIG_CPU_ARM7TDMI=y
CONFIG_CPU_ARM9TDMI=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_NOMMU=y
CONFIG_CPU_ABRT_LV4T=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V4=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
# CONFIG_SWP_EMULATE is not set
# CONFIG_CPU_HIGH_VECTOR is not set
CONFIG_CPU_ICACHE_DISABLE=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_TLS_REG_EMUL=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=8
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_SET_MEM_PARAM is not set
CONFIG_DRAM_BASE=0x00800000
CONFIG_DRAM_SIZE=0x00800000
CONFIG_FLASH_MEM_BASE=0x00400000
CONFIG_FLASH_SIZE=0x00400000
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_775420 is not set

#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_ARM_PSCI is not set
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=200
# CONFIG_SCHED_HRTICK is not set
# CONFIG_THUMB2_KERNEL is not set
# CONFIG_AEABI is not set
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HW_PERF_EVENTS is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
# CONFIG_NEON is not set

#
# Userspace binary formats
#
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
CONFIG_BINFMT_SHARED_FLAT=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# CONFIG_ARTHUR is not set

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_APM_EMULATION=m
CONFIG_PM_CLK=y
CONFIG_CPU_PM=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
# CONFIG_L2TP_ETH is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=m
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
CONFIG_BPF_JIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_YAM is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# FIR device drivers
#
CONFIG_BT=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTSDIO=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_MMIO=m
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
CONFIG_OF_SELFTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
# CONFIG_PARPORT is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_SRAM is not set
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=m
# CONFIG_JOYSTICK_GRIP_MP is not set
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=m
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_MC13783=m
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
# CONFIG_INPUT_AD714X_I2C is not set
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
CONFIG_INPUT_GPIO_TILT_POLLED=m
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_RETU_PWRBUTTON is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=m
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_N_GSM=m
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=m
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_EM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_SAMSUNG is not set
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_SERIAL_ARC is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_DCC=y
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_ATMEL=m
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_HW_RANDOM_TPM is not set
# CONFIG_R3964 is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_ST33_I2C=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_HAVE_S3C2410_I2C=y
# CONFIG_I2C_S3C2410 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
CONFIG_GPIO_ADNP=m

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=m

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_DS2780 is not set
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_APM_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
CONFIG_TEST_POWER=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_MAX8903=m
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_SMB347 is not set
CONFIG_BATTERY_GOLDFISH=m
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_AVS=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_ASIC3=y
CONFIG_MFD_MC13783=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_EGPIO is not set
CONFIG_HTC_PASIC3=m
CONFIG_MFD_RETU=m
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SM501 is not set
CONFIG_ABX500_CORE=y
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=m
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS65912=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_SI476X_CORE=m
# CONFIG_MFD_LM3533 is not set
CONFIG_MFD_TMIO=y
# CONFIG_MFD_T7L66XB is not set
CONFIG_MFD_TC6387XB=y
CONFIG_MFD_TC6393XB=y
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_GOLDFISH=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=m
# CONFIG_FB_AUO_K1900 is not set
# CONFIG_FB_AUO_K1901 is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LM3630=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_TPS65217=m
# CONFIG_LOGO is not set
CONFIG_FB_SSD1307=m
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=m
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_ORTEK=m
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_PS3REMOTE=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB_ARCH_HAS_XHCI is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_S3C is not set
CONFIG_MMC_SDHCI_PXAV3=m
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_TMIO_CORE=m
CONFIG_MMC_TMIO=m
CONFIG_MMC_DW=m
# CONFIG_MMC_DW_IDMAC is not set
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_EXYNOS=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_MC13783 is not set
CONFIG_LEDS_ASIC3=y
CONFIG_LEDS_RENESAS_TPU=y
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=m

#
# Virtio drivers
#
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_CLKDEV_LOOKUP=y

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_MMIO=y
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
CONFIG_STE_MODEM_RPROC=m

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=m
CONFIG_DEVFREQ_GOV_USERSPACE=m

#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set

#
# Analog to digital converters
#
CONFIG_EXYNOS_ADC=y
CONFIG_MAX1363=m
# CONFIG_TI_ADC081C is not set
CONFIG_TI_AM335X_ADC=m

#
# Amplifiers
#

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5380=m
CONFIG_AD5446=m
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#

#
# Phase-Locked Loop (PLL) frequency synthesizers
#

#
# Digital gyroscope sensors
#
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
# CONFIG_ITG3200 is not set

#
# Inertial measurement units
#
CONFIG_INV_MPU6050_IIO=m

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_VCNL4000=m
# CONFIG_HID_SENSOR_ALS is not set

#
# Magnetometer sensors
#
CONFIG_AK8975=m
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_PWM=y
# CONFIG_PWM_SAMSUNG is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=4
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y

#
# File systems
#
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_SYSFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_NOMMU_REGIONS=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_TEST_LIST_SORT=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y

#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=m
CONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_TEST_KSTRTOX=m
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_S3C_UART0 is not set
# CONFIG_DEBUG_S3C_UART1 is not set
# CONFIG_DEBUG_S3C_UART2 is not set
CONFIG_DEBUG_LL_UART_NONE=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
# CONFIG_EARLY_PRINTK is not set
# CONFIG_ARM_KPROBES_TEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_SMACK=y
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
# CONFIG_IMA_AUDIT is not set
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_APPRAISE=y
CONFIG_EVM=y
CONFIG_EVM_HMAC_VERSION=2
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_YAMA is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=m
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=m
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=m
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
# CONFIG_X509_CERTIFICATE_PARSER is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=m
CONFIG_VIRTUALIZATION=y

#
# Virtio drivers
#

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17  9:25         ` Chen Gang
@ 2013-04-17 10:01           ` Will Deacon
  -1 siblings, 0 replies; 42+ messages in thread
From: Will Deacon @ 2013-04-17 10:01 UTC (permalink / raw)
  To: Chen Gang
  Cc: Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, arnd

[adding Arnd, as he plays with randconfig too]

On Wed, Apr 17, 2013 at 10:25:34AM +0100, Chen Gang wrote:
> On 2013年04月03日 18:29, Chen Gang wrote:
>   I repeat it again (but it report another location), and put the config as attachment.

Thanks.

>   when you have time, please help check (if you have no time, I should try)
> 
>   the below is the new related information:

[...]

> arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> 
> 
>   compiling err:
> 
> arch/arm/vfp/vfphw.S: Assembler messages:
> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'

The problem here is that you've ended up targetting a platform (s5pv210)
that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
causes these warnings.

Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
don't want to do that for 7tdmi.

If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
Kconfig, that would solve your problem.

Will

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 10:01           ` Will Deacon
  0 siblings, 0 replies; 42+ messages in thread
From: Will Deacon @ 2013-04-17 10:01 UTC (permalink / raw)
  To: linux-arm-kernel

[adding Arnd, as he plays with randconfig too]

On Wed, Apr 17, 2013 at 10:25:34AM +0100, Chen Gang wrote:
> On 2013?04?03? 18:29, Chen Gang wrote:
>   I repeat it again (but it report another location), and put the config as attachment.

Thanks.

>   when you have time, please help check (if you have no time, I should try)
> 
>   the below is the new related information:

[...]

> arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> 
> 
>   compiling err:
> 
> arch/arm/vfp/vfphw.S: Assembler messages:
> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'

The problem here is that you've ended up targetting a platform (s5pv210)
that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
causes these warnings.

Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
don't want to do that for 7tdmi.

If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
Kconfig, that would solve your problem.

Will

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:01           ` Will Deacon
@ 2013-04-17 10:11             ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 10:11 UTC (permalink / raw)
  To: Will Deacon
  Cc: Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, arnd

On 2013年04月17日 18:01, Will Deacon wrote:
> The problem here is that you've ended up targetting a platform (s5pv210)
> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> causes these warnings.
> 
> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> don't want to do that for 7tdmi.
> 
> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> Kconfig, that would solve your problem.

  thank you very much for your analysing.

  :-)

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 10:11             ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 10:11 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?17? 18:01, Will Deacon wrote:
> The problem here is that you've ended up targetting a platform (s5pv210)
> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> causes these warnings.
> 
> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> don't want to do that for 7tdmi.
> 
> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> Kconfig, that would solve your problem.

  thank you very much for your analysing.

  :-)

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:01           ` Will Deacon
@ 2013-04-17 10:53             ` Arnd Bergmann
  -1 siblings, 0 replies; 42+ messages in thread
From: Arnd Bergmann @ 2013-04-17 10:53 UTC (permalink / raw)
  To: Will Deacon
  Cc: kgene.kim@samsung.com, Russell King - ARM Linux, Chen Gang,
	dhowells@redhat.com, linux-samsung-soc@vger.kernel.org,
	plagnioj@jcrosoft.com, linux-arm-kernel@lists.infradead.org

On Wednesday 17 April 2013, Will Deacon wrote:
> > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> > 
> > 
> >   compiling err:
> > 
> > arch/arm/vfp/vfphw.S: Assembler messages:
> > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
> 
> The problem here is that you've ended up targetting a platform (s5pv210)
> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> causes these warnings.
> 
> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> don't want to do that for 7tdmi.
> 
> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> Kconfig, that would solve your problem.

I have not tried to get no-MMU kernels to build in general. I think the way
it should be done is to not offer any user-selectable CPU types at all but
always select the CPU from the board.

For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
using an appropriate KCONFIG_ALLCONFIG= file.

The alternative is to use the patch below, but it may be incomplete: I could
not find anything other than AT91x40 in the kernel that actually has an
ARM7TDMI or ARM9TDMI.

	Arnd

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 84af266..c5e4ef0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,6 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +55,6 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 10:53             ` Arnd Bergmann
  0 siblings, 0 replies; 42+ messages in thread
From: Arnd Bergmann @ 2013-04-17 10:53 UTC (permalink / raw)
  To: linux-arm-kernel

On Wednesday 17 April 2013, Will Deacon wrote:
> > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> > 
> > 
> >   compiling err:
> > 
> > arch/arm/vfp/vfphw.S: Assembler messages:
> > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
> 
> The problem here is that you've ended up targetting a platform (s5pv210)
> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> causes these warnings.
> 
> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> don't want to do that for 7tdmi.
> 
> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> Kconfig, that would solve your problem.

I have not tried to get no-MMU kernels to build in general. I think the way
it should be done is to not offer any user-selectable CPU types at all but
always select the CPU from the board.

For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
using an appropriate KCONFIG_ALLCONFIG= file.

The alternative is to use the patch below, but it may be incomplete: I could
not find anything other than AT91x40 in the kernel that actually has an
ARM7TDMI or ARM9TDMI.

	Arnd

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 84af266..c5e4ef0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,6 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +55,6 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:53             ` Arnd Bergmann
@ 2013-04-17 11:02               ` Jean-Christophe PLAGNIOL-VILLARD
  -1 siblings, 0 replies; 42+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-17 11:02 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: kgene.kim@samsung.com, Russell King - ARM Linux, Chen Gang,
	Will Deacon, dhowells@redhat.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On 12:53 Wed 17 Apr     , Arnd Bergmann wrote:
> On Wednesday 17 April 2013, Will Deacon wrote:
> > > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> > > 
> > > 
> > >   compiling err:
> > > 
> > > arch/arm/vfp/vfphw.S: Assembler messages:
> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
> > 
> > The problem here is that you've ended up targetting a platform (s5pv210)
> > that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> > 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> > causes these warnings.
> > 
> > Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> > tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> > don't want to do that for 7tdmi.
> > 
> > If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> > Kconfig, that would solve your problem.
> 
> I have not tried to get no-MMU kernels to build in general. I think the way
> it should be done is to not offer any user-selectable CPU types at all but
> always select the CPU from the board.
> 
> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
> using an appropriate KCONFIG_ALLCONFIG= file.
> 
> The alternative is to use the patch below, but it may be incomplete: I could
> not find anything other than AT91x40 in the kernel that actually has an
> ARM7TDMI or ARM9TDMI.
> 
> 	Arnd
> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 84af266..c5e4ef0 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,6 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
whith the bool type at least
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +55,6 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 11:02               ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 42+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-17 11:02 UTC (permalink / raw)
  To: linux-arm-kernel

On 12:53 Wed 17 Apr     , Arnd Bergmann wrote:
> On Wednesday 17 April 2013, Will Deacon wrote:
> > > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
> > > 
> > > 
> > >   compiling err:
> > > 
> > > arch/arm/vfp/vfphw.S: Assembler messages:
> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
> > 
> > The problem here is that you've ended up targetting a platform (s5pv210)
> > that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
> > 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
> > causes these warnings.
> > 
> > Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
> > tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
> > don't want to do that for 7tdmi.
> > 
> > If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
> > Kconfig, that would solve your problem.
> 
> I have not tried to get no-MMU kernels to build in general. I think the way
> it should be done is to not offer any user-selectable CPU types at all but
> always select the CPU from the board.
> 
> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
> using an appropriate KCONFIG_ALLCONFIG= file.
> 
> The alternative is to use the patch below, but it may be incomplete: I could
> not find anything other than AT91x40 in the kernel that actually has an
> ARM7TDMI or ARM9TDMI.
> 
> 	Arnd
> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 84af266..c5e4ef0 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,6 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
whith the bool type at least
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +55,6 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 11:02               ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-04-19 11:56                 ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-19 11:56 UTC (permalink / raw)
  To: Jean-Christophe PLAGNIOL-VILLARD
  Cc: Arnd Bergmann, Will Deacon, kgene.kim@samsung.com,
	Russell King - ARM Linux, dhowells@redhat.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On 2013年04月17日 19:02, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:53 Wed 17 Apr     , Arnd Bergmann wrote:
>> On Wednesday 17 April 2013, Will Deacon wrote:
>>>> arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
>>>>
>>>>
>>>>   compiling err:
>>>>
>>>> arch/arm/vfp/vfphw.S: Assembler messages:
>>>> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
>>>> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
>>>
>>> The problem here is that you've ended up targetting a platform (s5pv210)
>>> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
>>> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
>>> causes these warnings.
>>>
>>> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
>>> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
>>> don't want to do that for 7tdmi.
>>>
>>> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
>>> Kconfig, that would solve your problem.
>>
>> I have not tried to get no-MMU kernels to build in general. I think the way
>> it should be done is to not offer any user-selectable CPU types at all but
>> always select the CPU from the board.
>>
>> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
>> using an appropriate KCONFIG_ALLCONFIG= file.
>>
>> The alternative is to use the patch below, but it may be incomplete: I could
>> not find anything other than AT91x40 in the kernel that actually has an
>> ARM7TDMI or ARM9TDMI.
>>
>> 	Arnd
>>
>> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
>> index 6c24985..dc972e1 100644
>> --- a/arch/arm/mach-at91/Kconfig.non_dt
>> +++ b/arch/arm/mach-at91/Kconfig.non_dt
>> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>>  	select ARCH_USES_GETTIMEOFFSET
>>  	select MULTI_IRQ_HANDLER
>>  	select SPARSE_IRQ
>> +	select CPU_ARM7TDMI
>>  
>>  endchoice
>>  
>> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
>> index 84af266..c5e4ef0 100644
>> --- a/arch/arm/mm/Kconfig
>> +++ b/arch/arm/mm/Kconfig
>> @@ -6,7 +6,6 @@ comment "Processor Type"
>>  
>>  # ARM7TDMI
>>  config CPU_ARM7TDMI
>> -	bool "Support ARM7TDMI processor"
> whith the bool type at least
>>  	depends on !MMU
>>  	select CPU_32v4T
>>  	select CPU_ABRT_LV4T
>> @@ -56,7 +55,6 @@ config CPU_ARM740T
>>  
>>  # ARM9TDMI
>>  config CPU_ARM9TDMI
>> -	bool "Support ARM9TDMI processor"
>>  	depends on !MMU
>>  	select CPU_32v4T
>>  	select CPU_ABRT_NOMMU
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 

  thank you for your all valuable information.

  if no one have time to continue to try, I should try (glad to try)

  if I try, I think I should:
    a. make a related patch according to all of you said.
    b. make menuconfig with the original .config
         save directly, and exit the menuconfig.
    c. check the related CONFIG_* value in new .config
    d. build
    e. ...
    z. I should fix this issue within this month.


  welcome any suggestions or completions.

  thanks.


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-19 11:56                 ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-19 11:56 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?17? 19:02, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:53 Wed 17 Apr     , Arnd Bergmann wrote:
>> On Wednesday 17 April 2013, Will Deacon wrote:
>>>> arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
>>>>
>>>>
>>>>   compiling err:
>>>>
>>>> arch/arm/vfp/vfphw.S: Assembler messages:
>>>> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
>>>> arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
>>>
>>> The problem here is that you've ended up targetting a platform (s5pv210)
>>> that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
>>> 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
>>> causes these warnings.
>>>
>>> Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
>>> tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
>>> don't want to do that for 7tdmi.
>>>
>>> If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
>>> Kconfig, that would solve your problem.
>>
>> I have not tried to get no-MMU kernels to build in general. I think the way
>> it should be done is to not offer any user-selectable CPU types at all but
>> always select the CPU from the board.
>>
>> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
>> using an appropriate KCONFIG_ALLCONFIG= file.
>>
>> The alternative is to use the patch below, but it may be incomplete: I could
>> not find anything other than AT91x40 in the kernel that actually has an
>> ARM7TDMI or ARM9TDMI.
>>
>> 	Arnd
>>
>> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
>> index 6c24985..dc972e1 100644
>> --- a/arch/arm/mach-at91/Kconfig.non_dt
>> +++ b/arch/arm/mach-at91/Kconfig.non_dt
>> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>>  	select ARCH_USES_GETTIMEOFFSET
>>  	select MULTI_IRQ_HANDLER
>>  	select SPARSE_IRQ
>> +	select CPU_ARM7TDMI
>>  
>>  endchoice
>>  
>> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
>> index 84af266..c5e4ef0 100644
>> --- a/arch/arm/mm/Kconfig
>> +++ b/arch/arm/mm/Kconfig
>> @@ -6,7 +6,6 @@ comment "Processor Type"
>>  
>>  # ARM7TDMI
>>  config CPU_ARM7TDMI
>> -	bool "Support ARM7TDMI processor"
> whith the bool type at least
>>  	depends on !MMU
>>  	select CPU_32v4T
>>  	select CPU_ABRT_LV4T
>> @@ -56,7 +55,6 @@ config CPU_ARM740T
>>  
>>  # ARM9TDMI
>>  config CPU_ARM9TDMI
>> -	bool "Support ARM9TDMI processor"
>>  	depends on !MMU
>>  	select CPU_32v4T
>>  	select CPU_ABRT_NOMMU
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 

  thank you for your all valuable information.

  if no one have time to continue to try, I should try (glad to try)

  if I try, I think I should:
    a. make a related patch according to all of you said.
    b. make menuconfig with the original .config
         save directly, and exit the menuconfig.
    c. check the related CONFIG_* value in new .config
    d. build
    e. ...
    z. I should fix this issue within this month.


  welcome any suggestions or completions.

  thanks.


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:53             ` Arnd Bergmann
@ 2013-04-17 11:07               ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 11:07 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Will Deacon, Russell King - ARM Linux, dhowells@redhat.com,
	plagnioj@jcrosoft.com, kgene.kim@samsung.com,
	linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On 2013年04月17日 18:53, Arnd Bergmann wrote:
> On Wednesday 17 April 2013, Will Deacon wrote:
>>> > > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
>>> > > 
>>> > > 
>>> > >   compiling err:
>>> > > 
>>> > > arch/arm/vfp/vfphw.S: Assembler messages:
>>> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
>>> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
>> > 
>> > The problem here is that you've ended up targetting a platform (s5pv210)
>> > that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
>> > 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
>> > causes these warnings.
>> > 
>> > Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
>> > tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
>> > don't want to do that for 7tdmi.
>> > 
>> > If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
>> > Kconfig, that would solve your problem.
> I have not tried to get no-MMU kernels to build in general. I think the way
> it should be done is to not offer any user-selectable CPU types at all but
> always select the CPU from the board.
> 
> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
> using an appropriate KCONFIG_ALLCONFIG= file.
> 
> The alternative is to use the patch below, but it may be incomplete: I could
> not find anything other than AT91x40 in the kernel that actually has an
> ARM7TDMI or ARM9TDMI.
> 
> 	Arnd

  it seems we really need think of the design carefully.

  I think we can assume that the crazy users (e.g. me) want to let
randconfig on each arm platform (scan one by one) to intend to make issues.

  :-)

gchen.

> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 84af266..c5e4ef0 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,6 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +55,6 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 11:07               ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 11:07 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?17? 18:53, Arnd Bergmann wrote:
> On Wednesday 17 April 2013, Will Deacon wrote:
>>> > > arm-linux-gnu-gcc -Wp,-MD,arch/arm/vfp/.vfphw.o.d  -nostdinc -isystem /usr/lib/gcc/arm-linux-gnueabi/4.7.1/include -I/root/linux-next/arch/arm/include -Iarch/arm/include/generated  -Iinclude -I/root/linux-next/arch/arm/include/uapi -Iarch/arm/include/generated/uapi -I/root/linux-next/include/uapi -Iinclude/generated/uapi -include /root/linux-next/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-s5pv210/include -Iarch/arm/plat-samsung/include  -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=4 -march=armv4t -mtune=arm9tdmi -include asm/unified.h -Wa,-mfpu=softvfp+vfp -mfloat-abi=soft        -c -o arch/arm/vfp/vfphw.o arch/arm/vfp/vfphw.S
>>> > > 
>>> > > 
>>> > >   compiling err:
>>> > > 
>>> > > arch/arm/vfp/vfphw.S: Assembler messages:
>>> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c0'
>>> > > arch/arm/vfp/vfphw.S:295: Error: selected processor does not support ARM mode `mrrc p11,3,r0,r1,c1'
>> > 
>> > The problem here is that you've ended up targetting a platform (s5pv210)
>> > that selects CPU_V7. VFP is then subsequently selected, but CONFIG_MMU=n, so
>> > 7TDMI and 9TDMI (v4 CPUs, no VFP) are selectable. Selecting either of those,
>> > causes these warnings.
>> > 
>> > Unfortunately, I'm not sure how best to fix this. Most of the !MMU CPUs are
>> > tied to a particular board (lots of `if ARCH_INTEGRATOR' predicates), but we
>> > don't want to do that for 7tdmi.
>> > 
>> > If we could enforce the strict exclusion of {<= ARMv5} and {ARMv6+} in the
>> > Kconfig, that would solve your problem.
> I have not tried to get no-MMU kernels to build in general. I think the way
> it should be done is to not offer any user-selectable CPU types at all but
> always select the CPU from the board.
> 
> For randconfig tests, I would recommend turning on CONFIG_MMU unconditionally
> using an appropriate KCONFIG_ALLCONFIG= file.
> 
> The alternative is to use the patch below, but it may be incomplete: I could
> not find anything other than AT91x40 in the kernel that actually has an
> ARM7TDMI or ARM9TDMI.
> 
> 	Arnd

  it seems we really need think of the design carefully.

  I think we can assume that the crazy users (e.g. me) want to let
randconfig on each arm platform (scan one by one) to intend to make issues.

  :-)

gchen.

> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 84af266..c5e4ef0 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,6 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +55,6 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17  9:25         ` Chen Gang
@ 2013-04-17 10:02           ` Russell King - ARM Linux
  -1 siblings, 0 replies; 42+ messages in thread
From: Russell King - ARM Linux @ 2013-04-17 10:02 UTC (permalink / raw)
  To: Chen Gang
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
> CONFIG_CPU_ARM7TDMI=y
> CONFIG_CPU_ARM9TDMI=y
> CONFIG_CPU_V7=y
> CONFIG_CPU_32v4T=y
> CONFIG_CPU_32v6K=y
> CONFIG_CPU_32v7=y

This is an invalid configuration.  A single kernel can not support ARMv7
and ARMv4T simultaneously.

The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
caused by the incomplete integration of uclinux.

I think the only thing which can be done is to remove the ARM9TDMI
support code, which doesn't seem to be used by anything, and adjust
ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
(which seems to be its only user.)

Here's the slightly smaller version of that:

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cb812a1..deb6c6a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 10:02           ` Russell King - ARM Linux
  0 siblings, 0 replies; 42+ messages in thread
From: Russell King - ARM Linux @ 2013-04-17 10:02 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
> CONFIG_CPU_ARM7TDMI=y
> CONFIG_CPU_ARM9TDMI=y
> CONFIG_CPU_V7=y
> CONFIG_CPU_32v4T=y
> CONFIG_CPU_32v6K=y
> CONFIG_CPU_32v7=y

This is an invalid configuration.  A single kernel can not support ARMv7
and ARMv4T simultaneously.

The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
caused by the incomplete integration of uclinux.

I think the only thing which can be done is to remove the ARM9TDMI
support code, which doesn't seem to be used by anything, and adjust
ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
(which seems to be its only user.)

Here's the slightly smaller version of that:

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cb812a1..deb6c6a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:02           ` Russell King - ARM Linux
@ 2013-04-17 10:17             ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 10:17 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org

On 2013年04月17日 18:02, Russell King - ARM Linux wrote:
> On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
>> > CONFIG_CPU_ARM7TDMI=y
>> > CONFIG_CPU_ARM9TDMI=y
>> > CONFIG_CPU_V7=y
>> > CONFIG_CPU_32v4T=y
>> > CONFIG_CPU_32v6K=y
>> > CONFIG_CPU_32v7=y
> This is an invalid configuration.  A single kernel can not support ARMv7
> and ARMv4T simultaneously.
> 
> The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
> CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
> caused by the incomplete integration of uclinux.
> 
> I think the only thing which can be done is to remove the ARM9TDMI
> support code, which doesn't seem to be used by anything, and adjust
> ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
> (which seems to be its only user.)
> 
> Here's the slightly smaller version of that:
> 

  thank you very much for your analysing.

  should I do something for it next ?
    (at least, I should learn the information both of yours)
    is it suitable to integrate the patch below to next-* tree ?
      if it it suitable, need I do something for it ?

  thanks.

  :-)


> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index cb812a1..deb6c6a 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-17 10:17             ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-17 10:17 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?17? 18:02, Russell King - ARM Linux wrote:
> On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
>> > CONFIG_CPU_ARM7TDMI=y
>> > CONFIG_CPU_ARM9TDMI=y
>> > CONFIG_CPU_V7=y
>> > CONFIG_CPU_32v4T=y
>> > CONFIG_CPU_32v6K=y
>> > CONFIG_CPU_32v7=y
> This is an invalid configuration.  A single kernel can not support ARMv7
> and ARMv4T simultaneously.
> 
> The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
> CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
> caused by the incomplete integration of uclinux.
> 
> I think the only thing which can be done is to remove the ARM9TDMI
> support code, which doesn't seem to be used by anything, and adjust
> ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
> (which seems to be its only user.)
> 
> Here's the slightly smaller version of that:
> 

  thank you very much for your analysing.

  should I do something for it next ?
    (at least, I should learn the information both of yours)
    is it suitable to integrate the patch below to next-* tree ?
      if it it suitable, need I do something for it ?

  thanks.

  :-)


> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index cb812a1..deb6c6a 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
  2013-04-17 10:02           ` Russell King - ARM Linux
@ 2013-04-22  6:13             ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-22  6:13 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann

On 2013年04月17日 18:02, Russell King - ARM Linux wrote:
> On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
>> CONFIG_CPU_ARM7TDMI=y
>> CONFIG_CPU_ARM9TDMI=y
>> CONFIG_CPU_V7=y
>> CONFIG_CPU_32v4T=y
>> CONFIG_CPU_32v6K=y
>> CONFIG_CPU_32v7=y
> 
> This is an invalid configuration.  A single kernel can not support ARMv7
> and ARMv4T simultaneously.
> 
> The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
> CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
> caused by the incomplete integration of uclinux.
> 
> I think the only thing which can be done is to remove the ARM9TDMI
> support code, which doesn't seem to be used by anything, and adjust
> ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
> (which seems to be its only user.)
> 
> Here's the slightly smaller version of that:
> 

  I apply your patch below.
  and also let CONFIG_MMU=y in menuconfig (just Arnd suggested).
  it passes compilation.

  I prefer to let the patch below to integrate into next-tree.
  if I should do it (e.g. need send the patch again in normal way), I
should try.

  thanks.


gchen.


> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index cb812a1..deb6c6a 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig
@ 2013-04-22  6:13             ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-22  6:13 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?17? 18:02, Russell King - ARM Linux wrote:
> On Wed, Apr 17, 2013 at 05:25:34PM +0800, Chen Gang wrote:
>> CONFIG_CPU_ARM7TDMI=y
>> CONFIG_CPU_ARM9TDMI=y
>> CONFIG_CPU_V7=y
>> CONFIG_CPU_32v4T=y
>> CONFIG_CPU_32v6K=y
>> CONFIG_CPU_32v7=y
> 
> This is an invalid configuration.  A single kernel can not support ARMv7
> and ARMv4T simultaneously.
> 
> The problem is caused by MMU=n, which exposes the CPU_ARM7TDMI and
> CPU_ARM9TDMI options, which in turn select 32v4T.  This is in turn
> caused by the incomplete integration of uclinux.
> 
> I think the only thing which can be done is to remove the ARM9TDMI
> support code, which doesn't seem to be used by anything, and adjust
> ARM7TDMI so that it isn't visible, but is selected by ARCH_AT91X40
> (which seems to be its only user.)
> 
> Here's the slightly smaller version of that:
> 

  I apply your patch below.
  and also let CONFIG_MMU=y in menuconfig (just Arnd suggested).
  it passes compilation.

  I prefer to let the patch below to integrate into next-tree.
  if I should do it (e.g. need send the patch again in normal way), I
should try.

  thanks.


gchen.


> diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
>  
>  endchoice
>  
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index cb812a1..deb6c6a 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
>  
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
>  
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 
> 
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-22  6:13             ` Chen Gang
@ 2013-04-24  4:12               ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:12 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann


If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
but in fact, only AT91X40 need ARM7TDMI, so not need let them visible.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
 arch/arm/mach-at91/Kconfig.non_dt |    1 +
 arch/arm/mm/Kconfig               |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig.non_dt
b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI

 endchoice

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9e8101e..3397d05 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"

 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T

 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-- 
1.7.7.6

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-24  4:12               ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:12 UTC (permalink / raw)
  To: linux-arm-kernel


If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
but in fact, only AT91X40 need ARM7TDMI, so not need let them visible.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
 arch/arm/mach-at91/Kconfig.non_dt |    1 +
 arch/arm/mm/Kconfig               |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig.non_dt
b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI

 endchoice

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9e8101e..3397d05 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"

 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T

 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-- 
1.7.7.6

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* Re: [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24  4:12               ` Chen Gang
@ 2013-04-24  4:16                 ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:16 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann


Oh, sorry, I forgot to disable word wrap, I should send patch v2 again.

For this patch itself, I just copy it from Russell's and Arnd's, and
want it to be applied.


On 2013年04月24日 12:12, Chen Gang wrote:
> 
> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
> but in fact, only AT91X40 need ARM7TDMI, so not need let them visible.
> 
> Signed-off-by: Chen Gang <gang.chen@asianux.com>
> ---
>  arch/arm/mach-at91/Kconfig.non_dt |    1 +
>  arch/arm/mm/Kconfig               |    4 ++--
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt
> b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
> 
>  endchoice
> 
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 9e8101e..3397d05 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
> 
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
> 
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-24  4:16                 ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:16 UTC (permalink / raw)
  To: linux-arm-kernel


Oh, sorry, I forgot to disable word wrap, I should send patch v2 again.

For this patch itself, I just copy it from Russell's and Arnd's, and
want it to be applied.


On 2013?04?24? 12:12, Chen Gang wrote:
> 
> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
> but in fact, only AT91X40 need ARM7TDMI, so not need let them visible.
> 
> Signed-off-by: Chen Gang <gang.chen@asianux.com>
> ---
>  arch/arm/mach-at91/Kconfig.non_dt |    1 +
>  arch/arm/mm/Kconfig               |    4 ++--
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig.non_dt
> b/arch/arm/mach-at91/Kconfig.non_dt
> index 6c24985..dc972e1 100644
> --- a/arch/arm/mach-at91/Kconfig.non_dt
> +++ b/arch/arm/mach-at91/Kconfig.non_dt
> @@ -47,6 +47,7 @@ config ARCH_AT91X40
>  	select ARCH_USES_GETTIMEOFFSET
>  	select MULTI_IRQ_HANDLER
>  	select SPARSE_IRQ
> +	select CPU_ARM7TDMI
> 
>  endchoice
> 
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 9e8101e..3397d05 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -6,7 +6,7 @@ comment "Processor Type"
> 
>  # ARM7TDMI
>  config CPU_ARM7TDMI
> -	bool "Support ARM7TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_LV4T
> @@ -56,7 +56,7 @@ config CPU_ARM740T
> 
>  # ARM9TDMI
>  config CPU_ARM9TDMI
> -	bool "Support ARM9TDMI processor"
> +	bool
>  	depends on !MMU
>  	select CPU_32v4T
>  	select CPU_ABRT_NOMMU
> 


-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24  4:12               ` Chen Gang
@ 2013-04-24  4:20                 ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:20 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann


If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
 arch/arm/mach-at91/Kconfig.non_dt |    1 +
 arch/arm/mm/Kconfig               |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9e8101e..3397d05 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-- 
1.7.7.6

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-24  4:20                 ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-24  4:20 UTC (permalink / raw)
  To: linux-arm-kernel


If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
---
 arch/arm/mach-at91/Kconfig.non_dt |    1 +
 arch/arm/mm/Kconfig               |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..dc972e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -47,6 +47,7 @@ config ARCH_AT91X40
 	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select CPU_ARM7TDMI
 
 endchoice
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9e8101e..3397d05 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -6,7 +6,7 @@ comment "Processor Type"
 
 # ARM7TDMI
 config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -56,7 +56,7 @@ config CPU_ARM740T
 
 # ARM9TDMI
 config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-- 
1.7.7.6

^ permalink raw reply related	[flat|nested] 42+ messages in thread

* Re: [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24  4:20                 ` Chen Gang
@ 2013-04-24 17:46                   ` Russell King - ARM Linux
  -1 siblings, 0 replies; 42+ messages in thread
From: Russell King - ARM Linux @ 2013-04-24 17:46 UTC (permalink / raw)
  To: Chen Gang
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann

On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.

I'll apply it myself this evening.  Can I add:

Tested-by: Chen Gang <gang.chen@asianux.com>

to it?

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-24 17:46                   ` Russell King - ARM Linux
  0 siblings, 0 replies; 42+ messages in thread
From: Russell King - ARM Linux @ 2013-04-24 17:46 UTC (permalink / raw)
  To: linux-arm-kernel

On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.

I'll apply it myself this evening.  Can I add:

Tested-by: Chen Gang <gang.chen@asianux.com>

to it?

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24 17:46                   ` Russell King - ARM Linux
@ 2013-04-24 17:59                     ` Jean-Christophe PLAGNIOL-VILLARD
  -1 siblings, 0 replies; 42+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-24 17:59 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: kgene.kim, Arnd Bergmann, Chen Gang, Will Deacon, dhowells,
	linux-samsung-soc, Jean-Christophe PLAGNIOL-VILLARD,
	linux-arm-kernel


On Apr 25, 2013, at 1:46 AM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:

> On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
> 
> I'll apply it myself this evening.  Can I add:
> 
> Tested-by: Chen Gang <gang.chen@asianux.com>
you add it mine too

Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
> 
> to it?
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-24 17:59                     ` Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 0 replies; 42+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2013-04-24 17:59 UTC (permalink / raw)
  To: linux-arm-kernel


On Apr 25, 2013, at 1:46 AM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:

> On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
> 
> I'll apply it myself this evening.  Can I add:
> 
> Tested-by: Chen Gang <gang.chen@asianux.com>
you add it mine too

Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
> 
> to it?
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24 17:59                     ` Jean-Christophe PLAGNIOL-VILLARD
@ 2013-04-25  1:16                       ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-25  1:16 UTC (permalink / raw)
  To: Jean-Christophe PLAGNIOL-VILLARD
  Cc: Russell King - ARM Linux, kgene.kim, Arnd Bergmann, Will Deacon,
	dhowells, linux-samsung-soc, linux-arm-kernel

On 2013年04月25日 01:59, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On Apr 25, 2013, at 1:46 AM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> 
>> > On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>>> >> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>>> >> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
>> > 
>> > I'll apply it myself this evening.  Can I add:
>> > 
>> > Tested-by: Chen Gang <gang.chen@asianux.com>
> you add it mine too
> 
> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-25  1:16                       ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-25  1:16 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?25? 01:59, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On Apr 25, 2013, at 1:46 AM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> 
>> > On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>>> >> If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>>> >> but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
>> > 
>> > I'll apply it myself this evening.  Can I add:
>> > 
>> > Tested-by: Chen Gang <gang.chen@asianux.com>
> you add it mine too
> 
> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* Re: [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
  2013-04-24 17:46                   ` Russell King - ARM Linux
@ 2013-04-25  1:16                     ` Chen Gang
  -1 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-25  1:16 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Will Deacon, dhowells@redhat.com, plagnioj@jcrosoft.com,
	kgene.kim@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Arnd Bergmann

On 2013年04月25日 01:46, Russell King - ARM Linux wrote:
> On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>> > If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>> > but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
> I'll apply it myself this evening.  Can I add:
> 
> Tested-by: Chen Gang <gang.chen@asianux.com>
> 
> to it?
> 
> 

Ok, thanks. this patch is really provided by you (Arnd also provided the
same patch, but it seems a little later than you). And I really only
reported and tested it.

And next, I should continue to find and make another patches for ARM.

Thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

* [PATCH v2] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible.
@ 2013-04-25  1:16                     ` Chen Gang
  0 siblings, 0 replies; 42+ messages in thread
From: Chen Gang @ 2013-04-25  1:16 UTC (permalink / raw)
  To: linux-arm-kernel

On 2013?04?25? 01:46, Russell King - ARM Linux wrote:
> On Wed, Apr 24, 2013 at 12:20:24PM +0800, Chen Gang wrote:
>> > If CONFIG_MMU is disabled, it will let ARM9TDMI and ARM7TDMI visible,
>> > but in fact, only AT91X40 need ARM7TDMI, so need not let them visible.
> I'll apply it myself this evening.  Can I add:
> 
> Tested-by: Chen Gang <gang.chen@asianux.com>
> 
> to it?
> 
> 

Ok, thanks. this patch is really provided by you (Arnd also provided the
same patch, but it seems a little later than you). And I really only
reported and tested it.

And next, I should continue to find and make another patches for ARM.

Thanks.

-- 
Chen Gang

Asianux Corporation

^ permalink raw reply	[flat|nested] 42+ messages in thread

end of thread, other threads:[~2013-04-25  1:17 UTC | newest]

Thread overview: 42+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-25  2:10 [Suggestion] ARM:S5pv210: compiling issue for s5pv210 by using randconfig Chen Gang
2013-03-25  2:10 ` Chen Gang
2013-04-03  9:46 ` Chen Gang
2013-04-03  9:46   ` Chen Gang
2013-04-03 10:10   ` Will Deacon
2013-04-03 10:10     ` Will Deacon
2013-04-03 10:29     ` Chen Gang
2013-04-03 10:29       ` Chen Gang
2013-04-17  9:25       ` Chen Gang
2013-04-17  9:25         ` Chen Gang
2013-04-17 10:01         ` Will Deacon
2013-04-17 10:01           ` Will Deacon
2013-04-17 10:11           ` Chen Gang
2013-04-17 10:11             ` Chen Gang
2013-04-17 10:53           ` Arnd Bergmann
2013-04-17 10:53             ` Arnd Bergmann
2013-04-17 11:02             ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-17 11:02               ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-19 11:56               ` Chen Gang
2013-04-19 11:56                 ` Chen Gang
2013-04-17 11:07             ` Chen Gang
2013-04-17 11:07               ` Chen Gang
2013-04-17 10:02         ` Russell King - ARM Linux
2013-04-17 10:02           ` Russell King - ARM Linux
2013-04-17 10:17           ` Chen Gang
2013-04-17 10:17             ` Chen Gang
2013-04-22  6:13           ` Chen Gang
2013-04-22  6:13             ` Chen Gang
2013-04-24  4:12             ` [PATCH] ARM: Kconfig: let ARM9TDMI and ARM7TDMI invisible Chen Gang
2013-04-24  4:12               ` Chen Gang
2013-04-24  4:16               ` Chen Gang
2013-04-24  4:16                 ` Chen Gang
2013-04-24  4:20               ` [PATCH v2] " Chen Gang
2013-04-24  4:20                 ` Chen Gang
2013-04-24 17:46                 ` Russell King - ARM Linux
2013-04-24 17:46                   ` Russell King - ARM Linux
2013-04-24 17:59                   ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-24 17:59                     ` Jean-Christophe PLAGNIOL-VILLARD
2013-04-25  1:16                     ` Chen Gang
2013-04-25  1:16                       ` Chen Gang
2013-04-25  1:16                   ` Chen Gang
2013-04-25  1:16                     ` Chen Gang

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.