All of lore.kernel.org
 help / color / mirror / Atom feed
From: Libo Chen <clbchenlibo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: "Zhang, Sonic" <Sonic.Zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
Cc: Libo Chen <libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
	"wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org"
	<wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
	"uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org"
	<uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org>,
	"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org"
	<lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
Date: Fri, 10 May 2013 09:01:36 +0800	[thread overview]
Message-ID: <518C46F0.6060507@huawei.com> (raw)
In-Reply-To: <B168F8A49F4BCF4C84FD23DA5F6363EEAD57-Nxh9ahLCS6GuVPpjEGsWsTcYPEmu4y7e@public.gmane.org>

On 2013/5/9 16:33, Zhang, Sonic wrote:
> Hi Libo,
> 
>> -----Original Message-----
>> From: Libo Chen [mailto:libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org]
>> Sent: Thursday, May 09, 2013 4:27 PM
>> To: Zhang, Sonic; wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org
>> Cc: uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-
>> i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org; Libo Chen
>> Subject: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init
>> successful
>>
>> down out_error_no_irq. When platform_get_irq fail, no need to free peripheral
>>
>> Signed-off-by: Libo Chen <libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
>> ---
>> drivers/i2c/busses/i2c-bfin-twi.c |    2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
>> index 05080c4..6617645 100644
>> --- a/drivers/i2c/busses/i2c-bfin-twi.c
>> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
>> @@ -709,9 +709,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
>> out_error_add_adapter:
>>       free_irq(iface->irq, iface);
>> out_error_req_irq:
>> -out_error_no_irq:
>>       peripheral_free_list((unsigned short *)pdev->dev.platform_data);
>> out_error_pin_mux:
>> +out_error_no_irq:
>>       iounmap(iface->regs_base);
>> out_error_ioremap:
>> out_error_get_res:
>> --
> 
> Sorry, but you didn't exchange as I suggested.
> Should be
> 

Hi Sonic,

Look at peripheral_request_list()
{
	u16 cnt;
	int ret;

	for (cnt = 0; per[cnt] != 0; cnt++) {

		ret = peripheral_request(per[cnt], label);

		if (ret < 0) {
			for ( ; cnt > 0; cnt--)
				peripheral_free(per[cnt - 1]);

			return ret;
		}
	}

	return 0;
}


When peripheral_request fail, it had called peripheral_free().
So there is no reason to call peripheral_free_list again.

Did I miss something else?


>> out_error_req_irq:
>> -out_error_no_irq:
>> +out_error_pin_mux:
>>       peripheral_free_list((unsigned short *)pdev->dev.platform_data);
>> -out_error_pin_mux:
>> +out_error_no_irq:
> 
> 
> Regards,
> 
> Sonic
> 
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: Libo Chen <clbchenlibo.chen@huawei.com>
To: "Zhang, Sonic" <Sonic.Zhang@analog.com>
Cc: Libo Chen <libo.chen@huawei.com>,
	"wsa@the-dreams.de" <wsa@the-dreams.de>,
	"uclinux-dist-devel@blackfin.uclinux.org" 
	<uclinux-dist-devel@blackfin.uclinux.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
	"lizefan@huawei.com" <lizefan@huawei.com>
Subject: Re: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
Date: Fri, 10 May 2013 09:01:36 +0800	[thread overview]
Message-ID: <518C46F0.6060507@huawei.com> (raw)
In-Reply-To: <B168F8A49F4BCF4C84FD23DA5F6363EEAD57@NWD2MBX7.ad.analog.com>

On 2013/5/9 16:33, Zhang, Sonic wrote:
> Hi Libo,
> 
>> -----Original Message-----
>> From: Libo Chen [mailto:libo.chen@huawei.com]
>> Sent: Thursday, May 09, 2013 4:27 PM
>> To: Zhang, Sonic; wsa@the-dreams.de
>> Cc: uclinux-dist-devel@blackfin.uclinux.org; linux-kernel@vger.kernel.org; linux-
>> i2c@vger.kernel.org; lizefan@huawei.com; Libo Chen
>> Subject: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init
>> successful
>>
>> down out_error_no_irq. When platform_get_irq fail, no need to free peripheral
>>
>> Signed-off-by: Libo Chen <libo.chen@huawei.com>
>> ---
>> drivers/i2c/busses/i2c-bfin-twi.c |    2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
>> index 05080c4..6617645 100644
>> --- a/drivers/i2c/busses/i2c-bfin-twi.c
>> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
>> @@ -709,9 +709,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
>> out_error_add_adapter:
>>       free_irq(iface->irq, iface);
>> out_error_req_irq:
>> -out_error_no_irq:
>>       peripheral_free_list((unsigned short *)pdev->dev.platform_data);
>> out_error_pin_mux:
>> +out_error_no_irq:
>>       iounmap(iface->regs_base);
>> out_error_ioremap:
>> out_error_get_res:
>> --
> 
> Sorry, but you didn't exchange as I suggested.
> Should be
> 

Hi Sonic,

Look at peripheral_request_list()
{
	u16 cnt;
	int ret;

	for (cnt = 0; per[cnt] != 0; cnt++) {

		ret = peripheral_request(per[cnt], label);

		if (ret < 0) {
			for ( ; cnt > 0; cnt--)
				peripheral_free(per[cnt - 1]);

			return ret;
		}
	}

	return 0;
}


When peripheral_request fail, it had called peripheral_free().
So there is no reason to call peripheral_free_list again.

Did I miss something else?


>> out_error_req_irq:
>> -out_error_no_irq:
>> +out_error_pin_mux:
>>       peripheral_free_list((unsigned short *)pdev->dev.platform_data);
>> -out_error_pin_mux:
>> +out_error_no_irq:
> 
> 
> Regards,
> 
> Sonic
> 
> 
> 



  parent reply	other threads:[~2013-05-10  1:01 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-09  8:27 [PATCH v2 0/2] i2c: fix two wrong mem release Libo Chen
2013-05-09  8:27 ` Libo Chen
2013-05-09  8:27 ` [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful Libo Chen
2013-05-09  8:27   ` Libo Chen
     [not found]   ` <1368088044-20408-2-git-send-email-libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2013-05-09  8:31     ` Zhang, Sonic
2013-05-09  8:31       ` Zhang, Sonic
2013-05-09  8:33     ` Zhang, Sonic
2013-05-09  8:33       ` Zhang, Sonic
     [not found]       ` <B168F8A49F4BCF4C84FD23DA5F6363EEAD57-Nxh9ahLCS6GuVPpjEGsWsTcYPEmu4y7e@public.gmane.org>
2013-05-10  1:01         ` Libo Chen [this message]
2013-05-10  1:01           ` Libo Chen
2013-05-13  8:52           ` Zhang, Sonic
2013-05-09  8:34   ` Zhang, Sonic
2013-05-09  8:27 ` [PATCH v2 2/2] i2c: pxa: no need release_mem_region before request_mem_region successful Libo Chen
2013-05-09  8:27   ` Libo Chen
     [not found] ` <1368088044-20408-1-git-send-email-libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2013-05-17  9:43   ` [PATCH v2 0/2] i2c: fix two wrong mem release Wolfram Sang
2013-05-17  9:43     ` Wolfram Sang
2013-05-19  2:13     ` Libo Chen
2013-05-19  2:13       ` Libo Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518C46F0.6060507@huawei.com \
    --to=clbchenlibo.chen-hv44wf8li93qt0dzr+alfa@public.gmane.org \
    --cc=Sonic.Zhang-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
    --cc=libo.chen-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lizefan-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
    --cc=uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.