* [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8
@ 2013-05-09 20:31 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
Hi,
(I'm resending this series from a subscribed address).
This patch series upgrades the kernel for the BeagleBone to 3.8.
The 3.8 kernel is taken from TI's own repo, and the actual branch/commit used
are the same as currently being used in their own BSP (see meta-ti for
OpenEmbedded / Yocto).
As the BB support is being mainlined, the old board-setup has been removed,
thus the 3.8 kernel requires the use of a device tree. (A DTS, am33x-bone.dts
is included in the kernel).
The new package, am33x-cm3, consists of the FW blob for the Cortex M3 on the
BB that handles the power management of the board. Without this firmware
loaded, even a simple `reboot` won't succeed. In the old 3.2 kernel, this was
compiled in as a part of the kernel, however, in the 3.8 kernel, it has to be
loaded during the runtime.
The last patch in the series (0005-beaglebone-enable-NFS-root.patch) is not
necessary; it's only my preferred way of testing.
Cheers,
Anders
Anders Darander (5):
beaglebone: update to linux 3.8
beaglebone: reduce defconfig
am33x-cm3: add FW for suspend/resume
beaglebone: add am33x-cm3
beaglebone: enable NFS root
board/beaglebone/linux-3.2.9.config | 252 -----------------------------
board/beaglebone/linux-3.8.config | 203 +++++++++++++++++++++++
configs/beaglebone_defconfig | 23 +--
package/Config.in | 1 +
package/am33x-cm3/Config.in | 4 +
package/am33x-cm3/am335x-pm-firmware-load | 6 +
package/am33x-cm3/am33x-cm3.mk | 26 +++
7 files changed, 247 insertions(+), 268 deletions(-)
delete mode 100644 board/beaglebone/linux-3.2.9.config
create mode 100644 board/beaglebone/linux-3.8.config
create mode 100644 package/am33x-cm3/Config.in
create mode 100755 package/am33x-cm3/am335x-pm-firmware-load
create mode 100644 package/am33x-cm3/am33x-cm3.mk
--
1.7.10.4
^ permalink raw reply [flat|nested] 10+ messages in thread* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
2013-05-10 22:44 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Anders Darander
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
The kernel config here, is basically the default one from the TI kernel.
Thus, it's omap2plus_defconfig, which is rather generic.
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
board/beaglebone/linux-3.2.9.config | 252 ----------------------------
board/beaglebone/linux-3.8.config | 315 +++++++++++++++++++++++++++++++++++
configs/beaglebone_defconfig | 22 +--
3 files changed, 321 insertions(+), 268 deletions(-)
delete mode 100644 board/beaglebone/linux-3.2.9.config
create mode 100644 board/beaglebone/linux-3.8.config
diff --git a/board/beaglebone/linux-3.2.9.config b/board/beaglebone/linux-3.2.9.config
deleted file mode 100644
index 4052f6e..0000000
--- a/board/beaglebone/linux-3.2.9.config
+++ /dev/null
@@ -1,252 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="beaglebone"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_ENCORE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_IGEP0030 is not set
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
-# CONFIG_MACH_AM335XIAEVM is not set
-CONFIG_OMAP3_EDMA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_THUMB2_KERNEL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_RFKILL_REGULATOR=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
-CONFIG_BMP085=m
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SENSORS_LIS3_I2C=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_TI_CPSW=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_BMA150=m
-CONFIG_INPUT_MMA8450=m
-CONFIG_INPUT_MPU3050=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_KXTJ9=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GENERIC_PWM=y
-CONFIG_DAVINCI_EHRPWM=y
-CONFIG_ECAP_PWM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MFD_TPS65217=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_HIDRAW=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_TI81XX_GLUE=y
-CONFIG_USB_TI_CPPI41_DMA_HW=y
-CONFIG_USB_ACM=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PRUSS=m
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_SW_RING=y
-CONFIG_IIO_KFIFO_BUF=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_PM_DEVFREQ=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_JTAG_ENABLE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/board/beaglebone/linux-3.8.config b/board/beaglebone/linux-3.8.config
new file mode 100644
index 0000000..7bf52ed
--- /dev/null
+++ b/board/beaglebone/linux-3.8.config
@@ -0,0 +1,315 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_OMAP=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_FPE_NWFPE=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_BT=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_OMAP_INTERCONNECT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=m
+# CONFIG_ATA_SFF is not set
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+CONFIG_KS8851=y
+CONFIG_KS8851_MLL=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_TI_CPSW=y
+CONFIG_SMSC_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_LM75=m
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_PALMAS_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65910=y
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL6040_CORE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_PALMAS_GPADC=y
+CONFIG_MFD_PALMAS_PWM=y
+CONFIG_MFD_PALMAS_RESOURCE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_DRM=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_RFBI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_SHARP_LS037V7DW01=m
+CONFIG_PANEL_NEC_NL8048HL11_01B=m
+CONFIG_PANEL_TAAL=m
+CONFIG_PANEL_TPO_TD043MTEA1=m
+CONFIG_PANEL_ACX565AKM=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC3_DEBUG=y
+CONFIG_USB_DWC3_VERBOSE=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=y
+CONFIG_OMAP_USB2=m
+CONFIG_OMAP_USB3=m
+CONFIG_OMAP_CONTROL_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_TWL4030_USB=m
+CONFIG_TWL6030_USB=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_PALMAS_USB=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_PALMAS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_STAGING=y
+CONFIG_DRM_OMAP=y
+CONFIG_DRM_OMAP_NUM_CRTCS=3
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index 2177068..f80dd79 100644
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -1,24 +1,14 @@
-# architecture
BR2_arm=y
BR2_cortex_a8=y
+BR2_KERNEL_HEADERS_3_8=y
BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
# BR2_SOFT_FLOAT is not set
-
-# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
-
-# filesystem
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-
-# lock down headers to avoid breaking with new defaults
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.2.9"
-
-# bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -26,11 +16,11 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
-
-# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
@ 2013-05-10 22:44 ` Arnout Vandecappelle
0 siblings, 0 replies; 10+ messages in thread
From: Arnout Vandecappelle @ 2013-05-10 22:44 UTC (permalink / raw)
To: buildroot
Hi Anders,
On 09/05/13 22:31, Anders Darander wrote:
> From: Anders Darander <anders@chargestorm.se>
>
> The kernel config here, is basically the default one from the TI kernel.
> Thus, it's omap2plus_defconfig, which is rather generic.
So why include a config in buildroot? If it's just the defconfig that
is already in the kernel tree, you can use it.
>
> As the beaglebone support is mainlined, there's no support for the old
> board setup files, and the only supported run-time configuration is through
> the device tree.
>
> We're also setting the kernel headers to follow the 3.8 series.
>
> Signed-off-by: Anders Darander <anders@chargestorm.se>
> ---
> board/beaglebone/linux-3.2.9.config | 252 ----------------------------
> board/beaglebone/linux-3.8.config | 315 +++++++++++++++++++++++++++++++++++
Please create your patches with the -M option to send-email or
format-patch, so that we can actually see the diff crossing the rename.
Otherwise it's pretty hard to review.
> configs/beaglebone_defconfig | 22 +--
> 3 files changed, 321 insertions(+), 268 deletions(-)
> delete mode 100644 board/beaglebone/linux-3.2.9.config
> create mode 100644 board/beaglebone/linux-3.8.config
>
[snip]
> diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
> index 2177068..f80dd79 100644
> --- a/configs/beaglebone_defconfig
> +++ b/configs/beaglebone_defconfig
> @@ -1,24 +1,14 @@
> -# architecture
> BR2_arm=y
> BR2_cortex_a8=y
> +BR2_KERNEL_HEADERS_3_8=y
> BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
> # BR2_SOFT_FLOAT is not set
> -
> -# system
Please don't remove these comments, they're useful. You can selectively
undo changes with 'git checkout -p configs/beaglebone_defconfig'.
> BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
> BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
> BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
> # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
> -
> -# filesystem
> BR2_TARGET_ROOTFS_EXT2=y
> # BR2_TARGET_ROOTFS_TAR is not set
> -
> -# lock down headers to avoid breaking with new defaults
> -BR2_KERNEL_HEADERS_VERSION=y
> -BR2_DEFAULT_KERNEL_VERSION="3.2.9"
> -
> -# bootloader
> BR2_TARGET_UBOOT=y
> BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
> BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> @@ -26,11 +16,11 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
> BR2_TARGET_UBOOT_FORMAT_IMG=y
> BR2_TARGET_UBOOT_SPL=y
> BR2_TARGET_UBOOT_SPL_NAME="MLO"
> -
> -# kernel
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> -BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
> -BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
Isn't there a tag you can clone from? That's much faster, because then
we can (usually) do a shallow clone.
Regards,
Arnout
> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
2013-05-10 22:45 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume Anders Darander
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
This is to make it more similar to the old 3.2.9 defconfig.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
board/beaglebone/linux-3.8.config | 180 +++++++------------------------------
1 file changed, 33 insertions(+), 147 deletions(-)
diff --git a/board/beaglebone/linux-3.8.config b/board/beaglebone/linux-3.8.config
index 7bf52ed..c083c70 100644
--- a/board/beaglebone/linux-3.8.config
+++ b/board/beaglebone/linux-3.8.config
@@ -1,4 +1,5 @@
CONFIG_EXPERIMENTAL=y
+CONFIG_DEFAULT_HOSTNAME="beaglebone"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
@@ -8,21 +9,19 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_OMAP=y
-CONFIG_GPIO_PCA953X=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
# CONFIG_ARCH_OMAP2 is not set
@@ -33,15 +32,14 @@ CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
-CONFIG_FPE_NWFPE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
@@ -59,47 +57,16 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_OMAP_INTERCONNECT=y
CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_EEPROM_93CX6=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SCAN_ASYNC=y
@@ -107,33 +74,28 @@ CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_ATA_SFF is not set
-CONFIG_MD=y
CONFIG_NETDEVICES=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_CPSW=y
+# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_SMSC_PHY=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
@@ -152,85 +114,25 @@ CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
-CONFIG_SENSORS_LM75=m
CONFIG_THERMAL=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
-CONFIG_PALMAS_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65910=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL6040_CORE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_PALMAS_GPADC=y
-CONFIG_MFD_PALMAS_PWM=y
-CONFIG_MFD_PALMAS_RESOURCE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_DRM=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_SOC=m
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=y
-CONFIG_USB_DWC3=m
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_DSPS=m
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_TEST=y
CONFIG_OMAP_USB2=m
@@ -246,10 +148,6 @@ CONFIG_USB_ETH_EEM=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_CDC=y
-CONFIG_TWL4030_USB=m
-CONFIG_TWL6030_USB=m
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_PALMAS_USB=m
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_SDIO_UART=y
@@ -266,15 +164,11 @@ CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_STAGING=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_NUM_CRTCS=3
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
@@ -284,18 +178,7 @@ CONFIG_QFMT_V2=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
@@ -305,11 +188,14 @@ CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
2013-05-10 22:56 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 4/5] beaglebone: add am33x-cm3 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 5/5] beaglebone: enable NFS root Anders Darander
4 siblings, 1 reply; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
Without this firmware, the beaglebone won't be able to reboot correctly.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
package/Config.in | 1 +
package/am33x-cm3/Config.in | 4 ++++
package/am33x-cm3/am335x-pm-firmware-load | 6 ++++++
package/am33x-cm3/am33x-cm3.mk | 26 ++++++++++++++++++++++++++
4 files changed, 37 insertions(+)
create mode 100644 package/am33x-cm3/Config.in
create mode 100755 package/am33x-cm3/am335x-pm-firmware-load
create mode 100644 package/am33x-cm3/am33x-cm3.mk
diff --git a/package/Config.in b/package/Config.in
index d980871..329d734 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -213,6 +213,7 @@ endmenu
menu "Hardware handling"
menu "Misc devices firmwares"
+source "package/am33x-cm3/Config.in"
source "package/b43-firmware/Config.in"
source "package/firmware-imx/Config.in"
source "package/linux-firmware/Config.in"
diff --git a/package/am33x-cm3/Config.in b/package/am33x-cm3/Config.in
new file mode 100644
index 0000000..ee39f7d
--- /dev/null
+++ b/package/am33x-cm3/Config.in
@@ -0,0 +1,4 @@
+config BR2_PACKAGE_AM33X_CM3
+ bool "am33x-cm3"
+ help
+ Cortex-M3 binary blob for suspend-resume
diff --git a/package/am33x-cm3/am335x-pm-firmware-load b/package/am33x-cm3/am335x-pm-firmware-load
new file mode 100755
index 0000000..56c17b3
--- /dev/null
+++ b/package/am33x-cm3/am335x-pm-firmware-load
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# Load the PM CM3 firmware
+echo 1 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
+cat /lib/firmware/am335x-pm-firmware.bin > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data
+echo 0 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
diff --git a/package/am33x-cm3/am33x-cm3.mk b/package/am33x-cm3/am33x-cm3.mk
new file mode 100644
index 0000000..6180157
--- /dev/null
+++ b/package/am33x-cm3/am33x-cm3.mk
@@ -0,0 +1,26 @@
+#############################################################
+#
+# am33x-cm3
+#
+#############################################################
+
+# SHA1 corresponds to tag "AM335xPSP_04.06.00.10-rc1"
+AM33X_CM3_VERSION = 27ca4643e422245a95723de1df0247a00eada45b
+AM33X_CM3_SITE = git://arago-project.org/git/projects/am33x-cm3.git
+AM33X_CM3_METHOD = git
+AM33X_CM3_LICENSE = TI-BSD
+AM33X_CM3_LICENSE_FILES = License.txt
+
+define AM33X_CM3_BUILD_CMDS
+ $(MAKE) CC="$(TARGET_CC)" CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) all
+endef
+
+# Not all of the firmware files are used
+define AM33X_CM3_INSTALL_TARGET_CMDS
+ $(INSTALL) -d -m 0755 $(TARGET_DIR)/lib/firmware/
+ $(INSTALL) -m 0644 $(@D)/bin/am335x-pm-firmware.bin $(TARGET_DIR)/lib/firmware
+ $(INSTALL) -d -m 0755 $(TARGET_DIR)/etc/init.d
+ $(INSTALL) -m 0755 package/am33x-cm3/am335x-pm-firmware-load $(TARGET_DIR)/etc/init.d/S93-am335x-pm-firwmare-load
+endef
+
+$(eval $(generic-package))
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume
2013-05-09 20:31 ` [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume Anders Darander
@ 2013-05-10 22:56 ` Arnout Vandecappelle
0 siblings, 0 replies; 10+ messages in thread
From: Arnout Vandecappelle @ 2013-05-10 22:56 UTC (permalink / raw)
To: buildroot
On 09/05/13 22:31, Anders Darander wrote:
> From: Anders Darander <anders@chargestorm.se>
>
> Without this firmware, the beaglebone won't be able to reboot correctly.
>
> Signed-off-by: Anders Darander <anders@chargestorm.se>
[snip]
> diff --git a/package/am33x-cm3/am33x-cm3.mk b/package/am33x-cm3/am33x-cm3.mk
> new file mode 100644
> index 0000000..6180157
> --- /dev/null
> +++ b/package/am33x-cm3/am33x-cm3.mk
> @@ -0,0 +1,26 @@
> +#############################################################
> +#
> +# am33x-cm3
> +#
> +#############################################################
> +
> +# SHA1 corresponds to tag "AM335xPSP_04.06.00.10-rc1"
> +AM33X_CM3_VERSION = 27ca4643e422245a95723de1df0247a00eada45b
If it is a tag, then use the tag, not the sha1.
> +AM33X_CM3_SITE = git://arago-project.org/git/projects/am33x-cm3.git
> +AM33X_CM3_METHOD = git
Since the site starts with git://, the method is git by default.
However, if the site supports http, we prefer to use that. Some company
firewalls block git.
> +AM33X_CM3_LICENSE = TI-BSD
I don't really like this license name. Either it's BSD (then it should
specify 2-, 3- or 4-clause), or it is not. In the latter case, it would
be something like "TI Open Source license (BSD-like)".
> +AM33X_CM3_LICENSE_FILES = License.txt
> +
> +define AM33X_CM3_BUILD_CMDS
> + $(MAKE) CC="$(TARGET_CC)" CROSS_COMPILE="$(TARGET_CROSS)" -C $(@D) all
Does it work with $(TARGET_CONFIGURE_OPTS) instead of CC=? If not, then
please also pass the CFLAGS and LDFLAGS - they may be important.
However, now I think about it - this is abusing the cross-compiler for
the Cortex-A8 to generate code for the Cortex-M3, correct? In that case,
passing CFLAGS and LDFLAGS is probably not a good idea. But it would also
be good to add a note about what is happening here.
> +endef
> +
> +# Not all of the firmware files are used
> +define AM33X_CM3_INSTALL_TARGET_CMDS
> + $(INSTALL) -d -m 0755 $(TARGET_DIR)/lib/firmware/
> + $(INSTALL) -m 0644 $(@D)/bin/am335x-pm-firmware.bin $(TARGET_DIR)/lib/firmware
We normally create directories with the -D option to install, so:
$(INSTALL) -m 0644 -D $(@D)/bin/am335x-pm-firmware.bin \
$(TARGET_DIR)/lib/firmware/am335x-pm-firmware.bin
> + $(INSTALL) -d -m 0755 $(TARGET_DIR)/etc/init.d
> + $(INSTALL) -m 0755 package/am33x-cm3/am335x-pm-firmware-load $(TARGET_DIR)/etc/init.d/S93-am335x-pm-firwmare-load
init scripts are installed by a separate variable,
AM33X_CM3_INSTALL_INIT_SYSV. And of course, the same remark about the -D
option applies.
Regards,
Arnout
> +endef
> +
> +$(eval $(generic-package))
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 4/5] beaglebone: add am33x-cm3
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
` (2 preceding siblings ...)
2013-05-09 20:31 ` [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 5/5] beaglebone: enable NFS root Anders Darander
4 siblings, 0 replies; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
Add the FW needed for the Cortex M3 on the beaglebone. This is required for
a working power management.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
configs/beaglebone_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index f80dd79..a6df39b 100644
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -7,6 +7,7 @@ BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
+BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_UBOOT=y
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [Buildroot] [PATCH 5/5] beaglebone: enable NFS root
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
` (3 preceding siblings ...)
2013-05-09 20:31 ` [Buildroot] [PATCH 4/5] beaglebone: add am33x-cm3 Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
4 siblings, 0 replies; 10+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
board/beaglebone/linux-3.8.config | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/beaglebone/linux-3.8.config b/board/beaglebone/linux-3.8.config
index c083c70..4242771 100644
--- a/board/beaglebone/linux-3.8.config
+++ b/board/beaglebone/linux-3.8.config
@@ -179,6 +179,8 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig
@ 2013-05-11 4:38 Anders Darander
0 siblings, 0 replies; 10+ messages in thread
From: Anders Darander @ 2013-05-11 4:38 UTC (permalink / raw)
To: buildroot
(Resending as I first sent from an unsubcribed email).
Arnout Vandecappelle <arnout@mind.be> wrote:
>On 09/05/13 22:31, Anders Darander wrote:
>> From: Anders Darander<anders@chargestorm.se>
>>
>> This is to make it more similar to the old 3.2.9 defconfig.
>
> This patch should probably be squashed with the previous one.
As noted my reply to the comments on the first patch, I'll squash them in
the next revision.
Cheers,
Anders
--
Anders Darander
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20130511/cec8ad00/attachment.html>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-05-11 4:38 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
2013-05-10 22:44 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Anders Darander
2013-05-10 22:45 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume Anders Darander
2013-05-10 22:56 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 4/5] beaglebone: add am33x-cm3 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 5/5] beaglebone: enable NFS root Anders Darander
-- strict thread matches above, loose matches on Subject: below --
2013-05-11 4:38 [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Anders Darander
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.