From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] at_hdmac: dt dma bindings update
Date: Fri, 31 May 2013 10:04:37 +0200 [thread overview]
Message-ID: <51A85995.1050909@atmel.com> (raw)
In-Reply-To: <20130530201321.GE23653@game.jcrosoft.org>
On 30/05/2013 22:13, Jean-Christophe PLAGNIOL-VILLARD :
> On 22:56 Thu 30 May , Vinod Koul wrote:
>> On Thu, May 30, 2013 at 06:08:20PM +0200, ludovic.desroches at atmel.com wrote:
>>> From: Ludovic Desroches <ludovic.desroches@atmel.com>
>>>
>>> Hi,
>>>
>>> This set of patches update the dt dma binding for at_hdmac since we need one
>>> more parameter. In order to keep backward compatibility, an existing cell will
>>> be used to add this parameter. Since the content of that cell will become a
>>> magic value due to the concatenation of the two parameters, it is time to
>>> use macros.
>> which tree is this targetted to be applied?
>
> arm-soc as this depends on alreadied applied cleanup I've
... already pushed (it must be the end of your sentence, Jean-Christophe...)
Vinod, Arnd,
- patch 1 shall be applied before any of the two others of the series
- patch 2 is pure DT modification, but relies on Jean-Christophe's
already pushed cleanup branch in arm-soc
- patch 3 is the pure dmaengine one, but relies on the 1st patch
So, maybe the preferred way to include this material upstream is to go
through arm-soc as suggested by Jean-Christophe.
Bye,
>> Arnd, can you review this series and ack if this needs to be applied thru
>> dmaengine?
>
> I prefer the invert
>
> Best Regards,
> J.
>>
>> --
>> ~Vinod
>>>
>>> Regards
>>>
>>> Ludovic Desroches (3):
>>> ARM: at91: dt: add header to define at_hdmac configuration
>>> ARM: at91: dt: switch DMA DT bindings to pre-processor
>>> at_hdmac: add FIFO configuration parameter to DMA DT binding
>>>
>>> .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++--
>>> arch/arm/boot/dts/at91sam9g45.dtsi | 5 ++--
>>> arch/arm/boot/dts/at91sam9n12.dtsi | 11 +++++----
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 17 +++++++-------
>>> arch/arm/boot/dts/sama5d3.dtsi | 19 +++++++--------
>>> drivers/dma/at_hdmac.c | 25 ++++++++++++++++----
>>> include/dt-bindings/dma/at91.h | 27 ++++++++++++++++++++++
>>> 7 files changed, 81 insertions(+), 30 deletions(-)
>>> create mode 100644 include/dt-bindings/dma/at91.h
>>>
>>> --
>>> 1.7.11.3
>>>
>>
>> --
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: Jean-Christophe PLAGNIOL-VILLARD
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 0/3] at_hdmac: dt dma bindings update
Date: Fri, 31 May 2013 10:04:37 +0200 [thread overview]
Message-ID: <51A85995.1050909@atmel.com> (raw)
In-Reply-To: <20130530201321.GE23653-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
On 30/05/2013 22:13, Jean-Christophe PLAGNIOL-VILLARD :
> On 22:56 Thu 30 May , Vinod Koul wrote:
>> On Thu, May 30, 2013 at 06:08:20PM +0200, ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org wrote:
>>> From: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
>>>
>>> Hi,
>>>
>>> This set of patches update the dt dma binding for at_hdmac since we need one
>>> more parameter. In order to keep backward compatibility, an existing cell will
>>> be used to add this parameter. Since the content of that cell will become a
>>> magic value due to the concatenation of the two parameters, it is time to
>>> use macros.
>> which tree is this targetted to be applied?
>
> arm-soc as this depends on alreadied applied cleanup I've
... already pushed (it must be the end of your sentence, Jean-Christophe...)
Vinod, Arnd,
- patch 1 shall be applied before any of the two others of the series
- patch 2 is pure DT modification, but relies on Jean-Christophe's
already pushed cleanup branch in arm-soc
- patch 3 is the pure dmaengine one, but relies on the 1st patch
So, maybe the preferred way to include this material upstream is to go
through arm-soc as suggested by Jean-Christophe.
Bye,
>> Arnd, can you review this series and ack if this needs to be applied thru
>> dmaengine?
>
> I prefer the invert
>
> Best Regards,
> J.
>>
>> --
>> ~Vinod
>>>
>>> Regards
>>>
>>> Ludovic Desroches (3):
>>> ARM: at91: dt: add header to define at_hdmac configuration
>>> ARM: at91: dt: switch DMA DT bindings to pre-processor
>>> at_hdmac: add FIFO configuration parameter to DMA DT binding
>>>
>>> .../devicetree/bindings/dma/atmel-dma.txt | 7 ++++--
>>> arch/arm/boot/dts/at91sam9g45.dtsi | 5 ++--
>>> arch/arm/boot/dts/at91sam9n12.dtsi | 11 +++++----
>>> arch/arm/boot/dts/at91sam9x5.dtsi | 17 +++++++-------
>>> arch/arm/boot/dts/sama5d3.dtsi | 19 +++++++--------
>>> drivers/dma/at_hdmac.c | 25 ++++++++++++++++----
>>> include/dt-bindings/dma/at91.h | 27 ++++++++++++++++++++++
>>> 7 files changed, 81 insertions(+), 30 deletions(-)
>>> create mode 100644 include/dt-bindings/dma/at91.h
>>>
>>> --
>>> 1.7.11.3
>>>
>>
>> --
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-05-31 8:04 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 16:08 [PATCH 0/3] at_hdmac: dt dma bindings update ludovic.desroches at atmel.com
2013-05-30 16:08 ` ludovic.desroches
2013-05-30 16:08 ` [PATCH 1/3] ARM: at91: dt: add header to define at_hdmac configuration ludovic.desroches at atmel.com
2013-05-30 16:08 ` ludovic.desroches
2013-05-31 21:30 ` Arnd Bergmann
2013-05-31 21:30 ` Arnd Bergmann
2013-06-03 7:32 ` Ludovic Desroches
2013-06-04 13:17 ` Nicolas Ferre
2013-06-04 13:17 ` Nicolas Ferre
[not found] ` <201305312330.29364.arnd-r2nGTMty4D4@public.gmane.org>
2013-06-03 7:32 ` Ludovic Desroches
2013-06-03 7:32 ` Ludovic Desroches
2013-05-30 16:08 ` [PATCH 2/3] ARM: at91: dt: switch DMA DT bindings to pre-processor ludovic.desroches at atmel.com
2013-05-30 16:08 ` ludovic.desroches
2013-05-30 16:08 ` [PATCH 3/3] at_hdmac: add FIFO configuration parameter to DMA DT binding ludovic.desroches at atmel.com
2013-05-30 16:08 ` ludovic.desroches
2013-05-30 16:32 ` Nicolas Ferre
2013-05-30 16:32 ` Nicolas Ferre
2013-05-30 16:39 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:39 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-31 9:16 ` Ludovic Desroches
2013-05-31 9:31 ` Nicolas Ferre
2013-05-31 9:31 ` Nicolas Ferre
2013-05-31 15:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-31 15:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-31 23:11 ` Olof Johansson
2013-05-31 23:11 ` Olof Johansson
2013-06-03 7:39 ` Ludovic Desroches
[not found] ` <CAOesGMhQetZfyzMpCax63xoRqtRW2ZRXt04MCbgCT-CcvUq43A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-06-03 7:39 ` Ludovic Desroches
2013-06-03 7:39 ` Ludovic Desroches
2013-05-31 9:16 ` Ludovic Desroches
[not found] ` <20130530163936.GC23653-RQcB7r2h9QmfDR2tN2SG5Ni2O/JbrIOy@public.gmane.org>
2013-05-31 9:16 ` Ludovic Desroches
2013-05-30 16:37 ` [PATCH 0/3] at_hdmac: dt dma bindings update Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 16:37 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 17:26 ` Vinod Koul
2013-05-30 17:26 ` Vinod Koul
2013-05-30 20:13 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-30 20:13 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-31 8:04 ` Nicolas Ferre [this message]
2013-05-31 8:04 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51A85995.1050909@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.