Re: [PATCH v4 0/8] sh_eth: deal with #ifdef'fery

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 06-06-2013 7:25, Magnus Damm wrote:

>>     This series deals mostly with excess #ifdef'fery in the 'sh_eth' driver.
>> It doesn't yet get rid of all the #ifdef'fery but that's a matter of another
>> patchset. The last patch (it was almost in the middle of the series before),
>> contrarywise, adds one missing #ifdef...

>> [1/8] sh_eth: remove #ifdef around EDSR and GECMR bit definitions
>> [2/8] sh_eth: use EDSR_ENALL to set EDSR
>> [3/8] sh_eth: remove duplicate sh_eth_set_duplex() definitions
>> [4/8] sh_eth: remove SH_ETH_HAS_TSU
>> [5/8] sh_eth: add IRQ flags to 'struct sh_eth_cpu_data'
>> [6/8] sh_eth: remove #ifdef around sh_eth_select_mii()
>> [7/8] sh_eth: consolidate sh_eth_reset()
>> [8/8] sh_eth: enclose PM code into #ifdef CONFIG_PM

> Thanks for your work on this.

     In this case it's mostly Iwamatsu-san's work.

> I'm looking forward to a sh-eth driver without #ifdef hell.

     I've started the next patch series with exactly this purpose.

> It may be just me misunderstanding, but the other day I noticed that
> external PHY handling seems broken in the sh-eth driver. I tried to
> enable a micron PHY driver but could not make the pieces fit together.
> I also wanted to use an external IRQ for the PHY link notification,
> but since I couldn't even get the micron PHY driver going in polling
> mode I decided to give up. Do you know the status of external PHY
> support in the sh-eth driver?

     Works for me on the BOCK-W board. As for PHY IRQs, driver forces 
polling on all PHYs.

> Cheers,

> / magnus

WBR, Sergei