From: Tushar Behera <tushar.behera@linaro.org>
To: Mark Brown <broonie@kernel.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Mark Brown <broonie@linaro.org>
Subject: Re: [PATCH 3/3] ARM: dts: Add WM1811A audio CODEC to Arndale bindings
Date: Tue, 02 Jul 2013 10:51:36 +0530 [thread overview]
Message-ID: <51D26360.2080708@linaro.org> (raw)
In-Reply-To: <1372714599-17588-3-git-send-email-broonie@kernel.org>
On 07/02/2013 03:06 AM, Mark Brown wrote:
> From: Mark Brown <broonie@linaro.org>
>
> The default audio module for the Arndale has a WM811A on it. Add this to
typo: WM1811A
Arndale board also comes with two other audio codec boards - ALC5631Q
and AK4678. Different audio codec boards came with different shipments.
> the device tree bindings.
>
> Signed-off-by: Mark Brown <broonie@linaro.org>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index 482f275..75c3065 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -325,7 +325,22 @@
> };
>
> i2c@12C90000 {
> - status = "disabled";
> + wm1811a@11 {
> + compatible = "wlf,wm1811";
> + reg = <0x1a>;
> +
> + AVDD2-supply = <&main_dc_reg>;
> + CPVDD-supply = <&main_dc_reg>;
> + DBVDD1-supply = <&main_dc_reg>;
> + DBVDD2-supply = <&main_dc_reg>;
> + DBVDD3-supply = <&main_dc_reg>;
> + LDO1VDD-supply = <&main_dc_reg>;
> + SPKVDD1-supply = <&main_dc_reg>;
> + SPKVDD2-supply = <&main_dc_reg>;
> +
> + wlf,ldo1ena = <&gpb0 0 0>;
> + wlf,ldo2ena = <&gpb0 1 0>;
> + };
> };
>
> i2c@12CA0000 {
>
--
Tushar Behera
WARNING: multiple messages have this Message-ID (diff)
From: tushar.behera@linaro.org (Tushar Behera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: dts: Add WM1811A audio CODEC to Arndale bindings
Date: Tue, 02 Jul 2013 10:51:36 +0530 [thread overview]
Message-ID: <51D26360.2080708@linaro.org> (raw)
In-Reply-To: <1372714599-17588-3-git-send-email-broonie@kernel.org>
On 07/02/2013 03:06 AM, Mark Brown wrote:
> From: Mark Brown <broonie@linaro.org>
>
> The default audio module for the Arndale has a WM811A on it. Add this to
typo: WM1811A
Arndale board also comes with two other audio codec boards - ALC5631Q
and AK4678. Different audio codec boards came with different shipments.
> the device tree bindings.
>
> Signed-off-by: Mark Brown <broonie@linaro.org>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index 482f275..75c3065 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -325,7 +325,22 @@
> };
>
> i2c at 12C90000 {
> - status = "disabled";
> + wm1811a at 11 {
> + compatible = "wlf,wm1811";
> + reg = <0x1a>;
> +
> + AVDD2-supply = <&main_dc_reg>;
> + CPVDD-supply = <&main_dc_reg>;
> + DBVDD1-supply = <&main_dc_reg>;
> + DBVDD2-supply = <&main_dc_reg>;
> + DBVDD3-supply = <&main_dc_reg>;
> + LDO1VDD-supply = <&main_dc_reg>;
> + SPKVDD1-supply = <&main_dc_reg>;
> + SPKVDD2-supply = <&main_dc_reg>;
> +
> + wlf,ldo1ena = <&gpb0 0 0>;
> + wlf,ldo2ena = <&gpb0 1 0>;
> + };
> };
>
> i2c at 12CA0000 {
>
--
Tushar Behera
next prev parent reply other threads:[~2013-07-02 5:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 21:36 [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Mark Brown
2013-07-01 21:36 ` Mark Brown
2013-07-01 21:36 ` [PATCH 2/3] ARM: dts: Hook up supplies for Arndale S5M8767 Mark Brown
2013-07-01 21:36 ` Mark Brown
2013-07-01 21:36 ` [PATCH 3/3] ARM: dts: Add WM1811A audio CODEC to Arndale bindings Mark Brown
2013-07-01 21:36 ` Mark Brown
2013-07-01 21:47 ` Fabio Estevam
2013-07-01 21:47 ` Fabio Estevam
2013-07-01 22:38 ` Mark Brown
2013-07-01 22:38 ` Mark Brown
2013-07-02 5:21 ` Tushar Behera [this message]
2013-07-02 5:21 ` Tushar Behera
2013-07-02 9:25 ` Mark Brown
2013-07-02 9:25 ` Mark Brown
2013-07-24 1:50 ` Kukjin Kim
2013-07-24 1:50 ` Kukjin Kim
2013-07-05 23:36 ` [PATCH 1/3] ARM: dts: Put Arndale fixed voltage regulators on a simple-bus Tomasz Figa
2013-07-05 23:36 ` Tomasz Figa
2013-07-06 9:19 ` Mark Brown
2013-07-06 9:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D26360.2080708@linaro.org \
--to=tushar.behera@linaro.org \
--cc=broonie@kernel.org \
--cc=broonie@linaro.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.