From: Sricharan R <r.sricharan@ti.com>
To: Sricharan R <r.sricharan@ti.com>
Cc: nm@ti.com, mark.rutland@arm.com, tony@atomide.com, rnayak@ti.com,
marc.zyngier@arm.com, santosh.shilimkar@ti.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
Date: Wed, 18 Sep 2013 21:26:26 +0530 [thread overview]
Message-ID: <5239CD2A.2020505@ti.com> (raw)
In-Reply-To: <1379519593-31758-1-git-send-email-r.sricharan@ti.com>
On Wednesday 18 September 2013 09:23 PM, Sricharan R wrote:
> The realtime counter called master counter, produces the count
> used by the private timer peripherals in the MPU_CLUSTER. The
> CNTFRQ per cpu register is used to denote the frequency of the counter.
> Currently the frequency value is passed from the
> DT file, but this is not scalable when we have other non-DT guest
> OS. This register must be set to the right value by the
> host OS, as this will be propagated to the guests as well.
>
> More discussions and the reason for adding this in a non-DT
> way can be seen from below.
> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93832.html
>
> So configuring this secure register for all the cpus here.
>
> While here, removing the clock-frequency DT entry for omap5 as
> it is no more needed after this patch.
>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> ---
> [V3] Removed the redundant entry in OMAP5.dtsi and
> a unnecessary newline in timer.c
>
> arch/arm/boot/dts/omap5.dtsi | 1 -
> arch/arm/mach-omap2/omap-secure.h | 2 ++
> arch/arm/mach-omap2/omap-smp.c | 9 +++++++++
> arch/arm/mach-omap2/timer.c | 5 +++++
> 4 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 07be2cd..8a45512 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -52,7 +52,6 @@
> <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
> - clock-frequency = <6144000>;
> };
>
> gic: interrupt-controller@48211000 {
> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
> index 0e72917..5f88824 100644
> --- a/arch/arm/mach-omap2/omap-secure.h
> +++ b/arch/arm/mach-omap2/omap-secure.h
> @@ -42,6 +42,8 @@
> #define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
> #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
>
> +#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109
> +
> /* Secure PPA(Primary Protected Application) APIs */
> #define OMAP4_PPA_L2_POR_INDEX 0x23
> #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 8708b2a..5a3c8d3 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -41,6 +41,8 @@
>
> u16 pm44xx_errata;
>
> +extern unsigned long arch_timer_freq;
> +
> /* SCU base address */
> static void __iomem *scu_base;
>
> @@ -66,6 +68,13 @@ static void omap4_secondary_init(unsigned int cpu)
> 4, 0, 0, 0, 0, 0);
>
> /*
> + * Configure the CNTFRQ register for the secondary cpu's which
> + * indicates the frequency of the cpu local timers.
> + */
> + if (soc_is_omap54xx() || soc_is_dra7xx())
> + omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
> +
> + /*
> * Synchronise with the boot thread.
> */
> spin_lock(&boot_lock);
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index fa74a06..d0af9b2 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -55,6 +55,7 @@
> #include "soc.h"
> #include "common.h"
> #include "powerdomain.h"
> +#include "omap-secure.h"
>
> #define REALTIME_COUNTER_BASE 0x48243200
> #define INCREMENTER_NUMERATOR_OFFSET 0x10
> @@ -65,6 +66,7 @@
>
> static struct omap_dm_timer clkev;
> static struct clock_event_device clockevent_gpt;
> +unsigned long arch_timer_freq;
>
> static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
> {
> @@ -542,6 +544,9 @@ static void __init realtime_counter_init(void)
> reg |= den;
> __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
>
> + arch_timer_freq = (rate / den) * num;
> + omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
> +
> iounmap(base);
> }
> #else
Sorry. Please ignore this as well. Will resend.
Regards,
Sricharan
WARNING: multiple messages have this Message-ID (diff)
From: r.sricharan@ti.com (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
Date: Wed, 18 Sep 2013 21:26:26 +0530 [thread overview]
Message-ID: <5239CD2A.2020505@ti.com> (raw)
In-Reply-To: <1379519593-31758-1-git-send-email-r.sricharan@ti.com>
On Wednesday 18 September 2013 09:23 PM, Sricharan R wrote:
> The realtime counter called master counter, produces the count
> used by the private timer peripherals in the MPU_CLUSTER. The
> CNTFRQ per cpu register is used to denote the frequency of the counter.
> Currently the frequency value is passed from the
> DT file, but this is not scalable when we have other non-DT guest
> OS. This register must be set to the right value by the
> host OS, as this will be propagated to the guests as well.
>
> More discussions and the reason for adding this in a non-DT
> way can be seen from below.
> http://www.mail-archive.com/linux-omap at vger.kernel.org/msg93832.html
>
> So configuring this secure register for all the cpus here.
>
> While here, removing the clock-frequency DT entry for omap5 as
> it is no more needed after this patch.
>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> ---
> [V3] Removed the redundant entry in OMAP5.dtsi and
> a unnecessary newline in timer.c
>
> arch/arm/boot/dts/omap5.dtsi | 1 -
> arch/arm/mach-omap2/omap-secure.h | 2 ++
> arch/arm/mach-omap2/omap-smp.c | 9 +++++++++
> arch/arm/mach-omap2/timer.c | 5 +++++
> 4 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 07be2cd..8a45512 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -52,7 +52,6 @@
> <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
> - clock-frequency = <6144000>;
> };
>
> gic: interrupt-controller at 48211000 {
> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
> index 0e72917..5f88824 100644
> --- a/arch/arm/mach-omap2/omap-secure.h
> +++ b/arch/arm/mach-omap2/omap-secure.h
> @@ -42,6 +42,8 @@
> #define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
> #define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
>
> +#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109
> +
> /* Secure PPA(Primary Protected Application) APIs */
> #define OMAP4_PPA_L2_POR_INDEX 0x23
> #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
> index 8708b2a..5a3c8d3 100644
> --- a/arch/arm/mach-omap2/omap-smp.c
> +++ b/arch/arm/mach-omap2/omap-smp.c
> @@ -41,6 +41,8 @@
>
> u16 pm44xx_errata;
>
> +extern unsigned long arch_timer_freq;
> +
> /* SCU base address */
> static void __iomem *scu_base;
>
> @@ -66,6 +68,13 @@ static void omap4_secondary_init(unsigned int cpu)
> 4, 0, 0, 0, 0, 0);
>
> /*
> + * Configure the CNTFRQ register for the secondary cpu's which
> + * indicates the frequency of the cpu local timers.
> + */
> + if (soc_is_omap54xx() || soc_is_dra7xx())
> + omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
> +
> + /*
> * Synchronise with the boot thread.
> */
> spin_lock(&boot_lock);
> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
> index fa74a06..d0af9b2 100644
> --- a/arch/arm/mach-omap2/timer.c
> +++ b/arch/arm/mach-omap2/timer.c
> @@ -55,6 +55,7 @@
> #include "soc.h"
> #include "common.h"
> #include "powerdomain.h"
> +#include "omap-secure.h"
>
> #define REALTIME_COUNTER_BASE 0x48243200
> #define INCREMENTER_NUMERATOR_OFFSET 0x10
> @@ -65,6 +66,7 @@
>
> static struct omap_dm_timer clkev;
> static struct clock_event_device clockevent_gpt;
> +unsigned long arch_timer_freq;
>
> static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
> {
> @@ -542,6 +544,9 @@ static void __init realtime_counter_init(void)
> reg |= den;
> __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
>
> + arch_timer_freq = (rate / den) * num;
> + omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
> +
> iounmap(base);
> }
> #else
Sorry. Please ignore this as well. Will resend.
Regards,
Sricharan
next prev parent reply other threads:[~2013-09-18 15:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 15:53 [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register Sricharan R
2013-09-18 15:53 ` Sricharan R
2013-09-18 15:56 ` Sricharan R [this message]
2013-09-18 15:56 ` Sricharan R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5239CD2A.2020505@ti.com \
--to=r.sricharan@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=rnayak@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.