* [fsl-community-base][PATCH] README: Add all missing boards
@ 2013-10-15 15:22 Daiane Angolini
2013-10-15 16:35 ` Otavio Salvador
0 siblings, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2013-10-15 15:22 UTC (permalink / raw)
To: meta-freescale
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
---
README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 45 insertions(+), 2 deletions(-)
diff --git a/README b/README
index 6ff6747..47c6a3b 100644
--- a/README
+++ b/README
@@ -14,6 +14,22 @@ processors:
* i.MX28
* Freescale i.MX28 Evaluation Board (imx28evk)
+ * DENX M28 SoM Evaluation Kit (m28evk)
+ * Crystalfontz CFA-10036 (cfa10036)
+ * Crystalfontz CFA-10037 (cfa10037)
+ * Crystalfontz CFA-10049 (cfa10049)
+ * Crystalfontz CFA-10055 (cfa10055)
+ * Crystalfontz CFA-10056 (cfa10056)
+ * Crystalfontz CFA-10057 (cfa10057)
+ * Crystalfontz CFA-10058 (cfa10058)
+
+ * i.MX31
+
+ * Freescale i.MX31 Platform Development Kit (imx31pdk)
+
+ * i.MX35
+
+ * Freescale i.MX35 Platform Development Kit (imx35pdk)
* i.MX51
@@ -23,10 +39,37 @@ processors:
* Freescale i.MX53 SABRE Automotive board (imx53ard)
* Freescale i.MX53 Quick Start Board (imx53qsb)
+ * DENX M53 SoM Evaluation Kit (m53evk)
+
+ * i.MX6SL
+
+ * Freescale i.MX6SL Evaluation Kit (imx6slevk)
+
+ * i.MX6Solo
+
+ * Freescale i.MX6Solo SABRE Automotive (imx6solosabreauto)
+ * Freescale i.MX6Solo SABRE Smart Device (imx6solosabresd)
+ * Wandboard i.MX6Solo Wandboard Solo (wandboard-solo)
+
+ * i.MX6DL
+
+ * Freescale i.MX6DL SABRE Automotive (imx6dlsabreauto)
+ * Freescale i.MX6DL SABRE Smart Device (imx6dlsabresd)
+ * Wandboard i.MX6DL Wandboard Duallite (wandboard-dual)
+
+ * i.MX6Q
- * i.MX6
+ * Boundary Devices i.MX6Q SABRE Lite (imx6qsabrelite)
+ * Boundary Devices Nitrogen6X (nitrogen6x)
+ * Boundary Devices Nitrogen6X Lite (nitrogen6x-lite)
+ * Congatec Qmx6 (cgtqmx6)
+ * Freescale i.MX6Q SABRE Automotive (imx6qsabreauto)
+ * Freescale i.MX6Q SABRE Smart Device (imx6qsabresd)
+ * Wandboard i.MX6Q Wandboard Quad (wandboard-quad)
+ * Zealz GK802 (gk802)
- * Freescale i.MX6Q SABRE Lite (imx6qsabrelite)
+ * VF6
+ * Freescale Vybrid TWR-VF65GS10 twr-vf65gs10
Quick Start Guide
-----------------
--
1.8.1.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [fsl-community-base][PATCH] README: Add all missing boards
2013-10-15 15:22 [fsl-community-base][PATCH] README: Add all missing boards Daiane Angolini
@ 2013-10-15 16:35 ` Otavio Salvador
2013-10-15 17:05 ` Daiane Angolini
0 siblings, 1 reply; 7+ messages in thread
From: Otavio Salvador @ 2013-10-15 16:35 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale@yoctoproject.org
Hello Daiane,
On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
<daiane.angolini@freescale.com> wrote:
> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
comments below ...
> ---
> README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 45 insertions(+), 2 deletions(-)
>
> diff --git a/README b/README
> index 6ff6747..47c6a3b 100644
> --- a/README
> +++ b/README
> @@ -14,6 +14,22 @@ processors:
> * i.MX28
>
> * Freescale i.MX28 Evaluation Board (imx28evk)
> + * DENX M28 SoM Evaluation Kit (m28evk)
> + * Crystalfontz CFA-10036 (cfa10036)
> + * Crystalfontz CFA-10037 (cfa10037)
> + * Crystalfontz CFA-10049 (cfa10049)
> + * Crystalfontz CFA-10055 (cfa10055)
> + * Crystalfontz CFA-10056 (cfa10056)
> + * Crystalfontz CFA-10057 (cfa10057)
> + * Crystalfontz CFA-10058 (cfa10058)
> +
> + * i.MX31
> +
> + * Freescale i.MX31 Platform Development Kit (imx31pdk)
> +
> + * i.MX35
> +
> + * Freescale i.MX35 Platform Development Kit (imx35pdk)
>
> * i.MX51
>
> @@ -23,10 +39,37 @@ processors:
>
> * Freescale i.MX53 SABRE Automotive board (imx53ard)
> * Freescale i.MX53 Quick Start Board (imx53qsb)
> + * DENX M53 SoM Evaluation Kit (m53evk)
> +
> + * i.MX6SL
> +
> + * Freescale i.MX6SL Evaluation Kit (imx6slevk)
> +
> + * i.MX6Solo
> +
> + * Freescale i.MX6Solo SABRE Automotive (imx6solosabreauto)
> + * Freescale i.MX6Solo SABRE Smart Device (imx6solosabresd)
> + * Wandboard i.MX6Solo Wandboard Solo (wandboard-solo)
> +
> + * i.MX6DL
> +
> + * Freescale i.MX6DL SABRE Automotive (imx6dlsabreauto)
> + * Freescale i.MX6DL SABRE Smart Device (imx6dlsabresd)
> + * Wandboard i.MX6DL Wandboard Duallite (wandboard-dual)
> +
> + * i.MX6Q
>
> - * i.MX6
> + * Boundary Devices i.MX6Q SABRE Lite (imx6qsabrelite)
> + * Boundary Devices Nitrogen6X (nitrogen6x)
> + * Boundary Devices Nitrogen6X Lite (nitrogen6x-lite)
> + * Congatec Qmx6 (cgtqmx6)
> + * Freescale i.MX6Q SABRE Automotive (imx6qsabreauto)
> + * Freescale i.MX6Q SABRE Smart Device (imx6qsabresd)
> + * Wandboard i.MX6Q Wandboard Quad (wandboard-quad)
> + * Zealz GK802 (gk802)
>
> - * Freescale i.MX6Q SABRE Lite (imx6qsabrelite)
> + * VF6
> + * Freescale Vybrid TWR-VF65GS10 twr-vf65gs10
First, thank you for taking the time to prepare this. However I think
this is wrong...
When we made this README we had no Release Notes at that time. Since
this we made a document which provides this information and also way
more hence it is bad to duplicate all this. I think we ought to point
to the Release Notes and remove the list of supported boards from the
README file..
What you think?
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [fsl-community-base][PATCH] README: Add all missing boards
2013-10-15 16:35 ` Otavio Salvador
@ 2013-10-15 17:05 ` Daiane Angolini
2013-10-15 17:55 ` Otavio Salvador
0 siblings, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2013-10-15 17:05 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
On 10/15/2013 01:35 PM, Otavio Salvador wrote:
> Hello Daiane,
>
> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
> <daiane.angolini@freescale.com> wrote:
>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>
> comments below ...
>
>> ---
>> README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 45 insertions(+), 2 deletions(-)
>>
>
> First, thank you for taking the time to prepare this. However I think
> this is wrong...
>
> When we made this README we had no Release Notes at that time. Since
> this we made a document which provides this information and also way
> more hence it is bad to duplicate all this. I think we ought to point
> to the Release Notes and remove the list of supported boards from the
> README file..
>
> What you think?
I think I agree. When I decided to work on this patch it was the plan B.
Do you have the link for:
* Release Notes for Dora
* Release Notes for master
What is the procedure when a new board was included?
--
Daiane
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [fsl-community-base][PATCH] README: Add all missing boards
2013-10-15 17:05 ` Daiane Angolini
@ 2013-10-15 17:55 ` Otavio Salvador
2013-10-15 18:12 ` Daiane Angolini
2013-10-15 19:39 ` [RFC] Dora Release Notes review Daiane Angolini
0 siblings, 2 replies; 7+ messages in thread
From: Otavio Salvador @ 2013-10-15 17:55 UTC (permalink / raw)
To: Daiane Angolini; +Cc: meta-freescale@yoctoproject.org
On Tue, Oct 15, 2013 at 2:05 PM, Daiane Angolini
<daiane.angolini@freescale.com> wrote:
> On 10/15/2013 01:35 PM, Otavio Salvador wrote:
>>
>> Hello Daiane,
>>
>> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
>> <daiane.angolini@freescale.com> wrote:
>>>
>>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>>
>>
>> comments below ...
>>
>>> ---
>>> README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>>> 1 file changed, 45 insertions(+), 2 deletions(-)
>>>
>>
>> First, thank you for taking the time to prepare this. However I think
>> this is wrong...
>>
>> When we made this README we had no Release Notes at that time. Since
>> this we made a document which provides this information and also way
>> more hence it is bad to duplicate all this. I think we ought to point
>> to the Release Notes and remove the list of supported boards from the
>> README file..
>>
>> What you think?
>
>
> I think I agree. When I decided to work on this patch it was the plan B.
>
> Do you have the link for:
>
> * Release Notes for Dora
http://freescale.github.io/doc/release-notes/1.5/
> * Release Notes for master
http://freescale.github.io/doc/release-notes/current/
This is the same of 1.5 for now.
> What is the procedure when a new board was included?
I think every new board, from now on, need to be add in the release
notes at same time people submit it to the BSP. This avoid we getting
to run in the end of the release cycle and end getting more people
involved at the Release Notes work.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [fsl-community-base][PATCH] README: Add all missing boards
2013-10-15 17:55 ` Otavio Salvador
@ 2013-10-15 18:12 ` Daiane Angolini
2013-10-15 18:41 ` Otavio Salvador
2013-10-15 19:39 ` [RFC] Dora Release Notes review Daiane Angolini
1 sibling, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2013-10-15 18:12 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale@yoctoproject.org
On 10/15/2013 02:55 PM, Otavio Salvador wrote:
> On Tue, Oct 15, 2013 at 2:05 PM, Daiane Angolini
> <daiane.angolini@freescale.com> wrote:
>> On 10/15/2013 01:35 PM, Otavio Salvador wrote:
>>>
>>> Hello Daiane,
>>>
>>> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
>>> <daiane.angolini@freescale.com> wrote:
>>>>
>>>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>>>
>>>
>>> comments below ...
>>>
>>>> ---
>>>> README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>>>> 1 file changed, 45 insertions(+), 2 deletions(-)
>>>>
>>>
>>> First, thank you for taking the time to prepare this. However I think
>>> this is wrong...
>>>
>>> When we made this README we had no Release Notes at that time. Since
>>> this we made a document which provides this information and also way
>>> more hence it is bad to duplicate all this. I think we ought to point
>>> to the Release Notes and remove the list of supported boards from the
>>> README file..
>>>
>>> What you think?
>>
>>
>> I think I agree. When I decided to work on this patch it was the plan B.
>>
>> Do you have the link for:
>>
>> * Release Notes for Dora
>
> http://freescale.github.io/doc/release-notes/1.5/
>
>> * Release Notes for master
>
> http://freescale.github.io/doc/release-notes/current/
>
> This is the same of 1.5 for now.
Perfect Otavio!
Thanks a lot.
I think we can start the review of RN as well. What do you think?
It's not 100% complete, but linux-default and u-boot-default is done.
>
>> What is the procedure when a new board was included?
>
> I think every new board, from now on, need to be add in the release
> notes at same time people submit it to the BSP. This avoid we getting
> to run in the end of the release cycle and end getting more people
> involved at the Release Notes work.
>
--
Daiane
^ permalink raw reply [flat|nested] 7+ messages in thread
* [RFC] Dora Release Notes review
2013-10-15 17:55 ` Otavio Salvador
2013-10-15 18:12 ` Daiane Angolini
@ 2013-10-15 19:39 ` Daiane Angolini
1 sibling, 0 replies; 7+ messages in thread
From: Daiane Angolini @ 2013-10-15 19:39 UTC (permalink / raw)
Cc: meta-freescale@yoctoproject.org
Please, take a look on Release Notes draft published at [1] in order to
make sure the board you're used is properly represented.
Please, focus on linux and u-boot default version table. And on FSL user
space package list.
There are some missing description and version:
linux-boundary description
linux-cfa description
linux-denx description
linux-timesys description
linux-wandboard description
linux-imx6dongle description
u-boot-imx6dongle description
u-boot-imx6dongle default version
If you use with some of those boards, and have one sentence description
telling why a new provider is needed, please, share!
Please, send a pull request to [2], or send an email to me and I will
make the change
I accept ideas on how to improve the Release Notes itself.
[1] http://freescale.github.io/doc/release-notes/1.5/
[2] https://github.com/Freescale/Documentation
Thanks in advance,
Daiane
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-10-15 19:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-15 15:22 [fsl-community-base][PATCH] README: Add all missing boards Daiane Angolini
2013-10-15 16:35 ` Otavio Salvador
2013-10-15 17:05 ` Daiane Angolini
2013-10-15 17:55 ` Otavio Salvador
2013-10-15 18:12 ` Daiane Angolini
2013-10-15 18:41 ` Otavio Salvador
2013-10-15 19:39 ` [RFC] Dora Release Notes review Daiane Angolini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.