[fsl-community-base][PATCH] README: Add all missing boards

[fsl-community-base][PATCH] README: Add all missing boards

[Daiane Angolini]

Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
---
 README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 45 insertions(+), 2 deletions(-)

diff --git a/README b/README
index 6ff6747..47c6a3b 100644
--- a/README
+++ b/README
@@ -14,6 +14,22 @@ processors:
  * i.MX28
 
    * Freescale i.MX28 Evaluation Board (imx28evk)
+   * DENX M28 SoM Evaluation Kit (m28evk)
+   * Crystalfontz CFA-10036 (cfa10036)
+   * Crystalfontz CFA-10037 (cfa10037)
+   * Crystalfontz CFA-10049 (cfa10049)
+   * Crystalfontz CFA-10055 (cfa10055)
+   * Crystalfontz CFA-10056 (cfa10056)
+   * Crystalfontz CFA-10057 (cfa10057)
+   * Crystalfontz CFA-10058 (cfa10058)
+
+ * i.MX31
+
+   * Freescale i.MX31 Platform Development Kit (imx31pdk)
+
+ * i.MX35
+
+   * Freescale i.MX35 Platform Development Kit (imx35pdk)
 
  * i.MX51
 
@@ -23,10 +39,37 @@ processors:
 
    * Freescale i.MX53 SABRE Automotive board (imx53ard)
    * Freescale i.MX53 Quick Start Board (imx53qsb)
+   * DENX M53 SoM Evaluation Kit (m53evk)
+
+ * i.MX6SL
+
+   * Freescale i.MX6SL Evaluation Kit (imx6slevk)
+
+ * i.MX6Solo
+
+   * Freescale i.MX6Solo SABRE Automotive (imx6solosabreauto)
+   * Freescale i.MX6Solo SABRE Smart Device (imx6solosabresd)
+   * Wandboard i.MX6Solo Wandboard Solo (wandboard-solo)
+
+ * i.MX6DL
+
+   * Freescale i.MX6DL SABRE Automotive (imx6dlsabreauto)
+   * Freescale i.MX6DL SABRE Smart Device (imx6dlsabresd)
+   * Wandboard i.MX6DL Wandboard Duallite (wandboard-dual)
+
+ * i.MX6Q
 
- * i.MX6
+   * Boundary Devices i.MX6Q SABRE Lite (imx6qsabrelite)
+   * Boundary Devices Nitrogen6X (nitrogen6x)
+   * Boundary Devices Nitrogen6X Lite (nitrogen6x-lite)
+   * Congatec Qmx6 (cgtqmx6)
+   * Freescale i.MX6Q SABRE Automotive (imx6qsabreauto)
+   * Freescale i.MX6Q SABRE Smart Device (imx6qsabresd)
+   * Wandboard i.MX6Q Wandboard Quad (wandboard-quad)
+   * Zealz GK802 (gk802)
 
-   * Freescale i.MX6Q SABRE Lite (imx6qsabrelite)
+ * VF6
+   * Freescale Vybrid TWR-VF65GS10 twr-vf65gs10
 
 Quick Start Guide
 -----------------
-- 
1.8.1.2

Re: [fsl-community-base][PATCH] README: Add all missing boards

[Otavio Salvador]

Hello Daiane,

On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
<daiane.angolini@freescale.com> wrote:
> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>

comments below ...

> ---
>  README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 45 insertions(+), 2 deletions(-)
>
> diff --git a/README b/README
> index 6ff6747..47c6a3b 100644
> --- a/README
> +++ b/README
> @@ -14,6 +14,22 @@ processors:
>   * i.MX28
>
>     * Freescale i.MX28 Evaluation Board (imx28evk)
> +   * DENX M28 SoM Evaluation Kit (m28evk)
> +   * Crystalfontz CFA-10036 (cfa10036)
> +   * Crystalfontz CFA-10037 (cfa10037)
> +   * Crystalfontz CFA-10049 (cfa10049)
> +   * Crystalfontz CFA-10055 (cfa10055)
> +   * Crystalfontz CFA-10056 (cfa10056)
> +   * Crystalfontz CFA-10057 (cfa10057)
> +   * Crystalfontz CFA-10058 (cfa10058)
> +
> + * i.MX31
> +
> +   * Freescale i.MX31 Platform Development Kit (imx31pdk)
> +
> + * i.MX35
> +
> +   * Freescale i.MX35 Platform Development Kit (imx35pdk)
>
>   * i.MX51
>
> @@ -23,10 +39,37 @@ processors:
>
>     * Freescale i.MX53 SABRE Automotive board (imx53ard)
>     * Freescale i.MX53 Quick Start Board (imx53qsb)
> +   * DENX M53 SoM Evaluation Kit (m53evk)
> +
> + * i.MX6SL
> +
> +   * Freescale i.MX6SL Evaluation Kit (imx6slevk)
> +
> + * i.MX6Solo
> +
> +   * Freescale i.MX6Solo SABRE Automotive (imx6solosabreauto)
> +   * Freescale i.MX6Solo SABRE Smart Device (imx6solosabresd)
> +   * Wandboard i.MX6Solo Wandboard Solo (wandboard-solo)
> +
> + * i.MX6DL
> +
> +   * Freescale i.MX6DL SABRE Automotive (imx6dlsabreauto)
> +   * Freescale i.MX6DL SABRE Smart Device (imx6dlsabresd)
> +   * Wandboard i.MX6DL Wandboard Duallite (wandboard-dual)
> +
> + * i.MX6Q
>
> - * i.MX6
> +   * Boundary Devices i.MX6Q SABRE Lite (imx6qsabrelite)
> +   * Boundary Devices Nitrogen6X (nitrogen6x)
> +   * Boundary Devices Nitrogen6X Lite (nitrogen6x-lite)
> +   * Congatec Qmx6 (cgtqmx6)
> +   * Freescale i.MX6Q SABRE Automotive (imx6qsabreauto)
> +   * Freescale i.MX6Q SABRE Smart Device (imx6qsabresd)
> +   * Wandboard i.MX6Q Wandboard Quad (wandboard-quad)
> +   * Zealz GK802 (gk802)
>
> -   * Freescale i.MX6Q SABRE Lite (imx6qsabrelite)
> + * VF6
> +   * Freescale Vybrid TWR-VF65GS10 twr-vf65gs10

First, thank you for taking the time to prepare this. However  I think
this is wrong...

When we made this README we had no Release Notes at that time. Since
this we made a document which provides this information and also way
more hence it is bad to duplicate all this. I think we ought to point
to the Release Notes and remove the list of supported boards from the
README file..

What you think?


-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [fsl-community-base][PATCH] README: Add all missing boards

[Daiane Angolini]

On 10/15/2013 01:35 PM, Otavio Salvador wrote:
> Hello Daiane,
>
> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
> <daiane.angolini@freescale.com> wrote:
>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>
> comments below ...
>
>> ---
>>   README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>>   1 file changed, 45 insertions(+), 2 deletions(-)
>>
>
> First, thank you for taking the time to prepare this. However  I think
> this is wrong...
>
> When we made this README we had no Release Notes at that time. Since
> this we made a document which provides this information and also way
> more hence it is bad to duplicate all this. I think we ought to point
> to the Release Notes and remove the list of supported boards from the
> README file..
>
> What you think?

I think I agree. When I decided to work on this patch it was the plan B.

Do you have the link for:

* Release Notes for Dora
* Release Notes for master


What is the procedure when a new board was included?


-- 
Daiane

Re: [fsl-community-base][PATCH] README: Add all missing boards

[Otavio Salvador]

On Tue, Oct 15, 2013 at 2:05 PM, Daiane Angolini
<daiane.angolini@freescale.com> wrote:
> On 10/15/2013 01:35 PM, Otavio Salvador wrote:
>>
>> Hello Daiane,
>>
>> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
>> <daiane.angolini@freescale.com> wrote:
>>>
>>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>>
>>
>> comments below ...
>>
>>> ---
>>>   README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>>>   1 file changed, 45 insertions(+), 2 deletions(-)
>>>
>>
>> First, thank you for taking the time to prepare this. However  I think
>> this is wrong...
>>
>> When we made this README we had no Release Notes at that time. Since
>> this we made a document which provides this information and also way
>> more hence it is bad to duplicate all this. I think we ought to point
>> to the Release Notes and remove the list of supported boards from the
>> README file..
>>
>> What you think?
>
>
> I think I agree. When I decided to work on this patch it was the plan B.
>
> Do you have the link for:
>
> * Release Notes for Dora

http://freescale.github.io/doc/release-notes/1.5/

> * Release Notes for master

http://freescale.github.io/doc/release-notes/current/

This is the same of 1.5 for now.

> What is the procedure when a new board was included?

I think every new board, from now on, need to be add in the release
notes at same time people submit it to the BSP. This avoid we getting
to run in the end of the release cycle and end getting more people
involved at the Release Notes work.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Re: [fsl-community-base][PATCH] README: Add all missing boards

[Daiane Angolini]

On 10/15/2013 02:55 PM, Otavio Salvador wrote:
> On Tue, Oct 15, 2013 at 2:05 PM, Daiane Angolini
> <daiane.angolini@freescale.com> wrote:
>> On 10/15/2013 01:35 PM, Otavio Salvador wrote:
>>>
>>> Hello Daiane,
>>>
>>> On Tue, Oct 15, 2013 at 12:22 PM, Daiane Angolini
>>> <daiane.angolini@freescale.com> wrote:
>>>>
>>>> Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
>>>
>>>
>>> comments below ...
>>>
>>>> ---
>>>>    README | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>>>>    1 file changed, 45 insertions(+), 2 deletions(-)
>>>>
>>>
>>> First, thank you for taking the time to prepare this. However  I think
>>> this is wrong...
>>>
>>> When we made this README we had no Release Notes at that time. Since
>>> this we made a document which provides this information and also way
>>> more hence it is bad to duplicate all this. I think we ought to point
>>> to the Release Notes and remove the list of supported boards from the
>>> README file..
>>>
>>> What you think?
>>
>>
>> I think I agree. When I decided to work on this patch it was the plan B.
>>
>> Do you have the link for:
>>
>> * Release Notes for Dora
>
> http://freescale.github.io/doc/release-notes/1.5/
>
>> * Release Notes for master
>
> http://freescale.github.io/doc/release-notes/current/
>
> This is the same of 1.5 for now.

Perfect Otavio!

Thanks a lot.

I think we can start the review of RN as well. What do you think?
It's not 100% complete, but linux-default and u-boot-default is done.

>
>> What is the procedure when a new board was included?
>
> I think every new board, from now on, need to be add in the release
> notes at same time people submit it to the BSP. This avoid we getting
> to run in the end of the release cycle and end getting more people
> involved at the Release Notes work.
>


-- 
Daiane

Re: [fsl-community-base][PATCH] README: Add all missing boards

[Otavio Salvador]

On Tue, Oct 15, 2013 at 3:12 PM, Daiane Angolini
<daiane.angolini@freescale.com> wrote:
> On 10/15/2013 02:55 PM, Otavio Salvador wrote:
>> On Tue, Oct 15, 2013 at 2:05 PM, Daiane Angolini
>> http://freescale.github.io/doc/release-notes/current/
>>
>> This is the same of 1.5 for now.
>
>
> Perfect Otavio!
>
> Thanks a lot.
>
> I think we can start the review of RN as well. What do you think?
> It's not 100% complete, but linux-default and u-boot-default is done.

Sure; can you send an e-mail pointing people to the github repository
and start a thread about it?

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[RFC] Dora Release Notes review

[Daiane Angolini]

Please, take a look on Release Notes draft published at [1] in order to 
make sure the board you're used is properly represented.

Please, focus on linux and u-boot default version table. And on FSL user 
space package list.


There are some missing description and version:

linux-boundary description
linux-cfa description
linux-denx description
linux-timesys description
linux-wandboard description
linux-imx6dongle description
u-boot-imx6dongle description
u-boot-imx6dongle default version


If you use with some of those boards, and have one sentence description 
telling why a new provider is needed, please, share!

Please, send a pull request to [2], or send an email to me and I will 
make the change

I accept ideas on how to improve the Release Notes itself.


[1] http://freescale.github.io/doc/release-notes/1.5/
[2] https://github.com/Freescale/Documentation


Thanks in advance,
Daiane